1. Epic GamesDeveloper
  3. FModularSynthPreset

FModularSynthPreset

API > API/Plugins > API/Plugins/Synthesis > API/Plugins/Synthesis/SynthComponents

Inheritance Hierarchy

References

   
Module Synthesis
Header /Engine/Plugins/Runtime/Synthesis/Source/Synthesis/Classes/SynthComponents/EpicSynth1Component.h
Include #include "SynthComponents/EpicSynth1Component.h"

Syntax

USTRUCT&40;BlueprintType&41;  
struct FModularSynthPreset : public FTableRowBase

Variables

  Type Name Description
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float AttackTime The amplitude envelope attack time (in ms) [0.0, 10000].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bChorusEnabled Whether or not the chorus effect is enabled.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bEnableOscillatorSync Whether or not oscillator sync is enabled. Oscillator sync forces oscillator 2's phase to align with oscillator 1's phase.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bEnablePolyphony Whether or not to allow multiple synth voices.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bEnableUnison Enables forcing the oscillators to have no stereo spread.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bInvertModulationEnvelope Whether or not to invert the modulation envelope.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bInvertModulationEnvelopeBias Whether or not to invert the modulation envelope bias output.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bLegato Whether or not to use legato mode.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bRetrigger Whether or not to use retrigger mode.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite uint32: 1 bStereoDelayEnabled Whether or not stereo delay is enabled on the synth.
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ChorusDepth The depth of the chorus effect [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ChorusFeedback The amount of feedback in the chorus effect [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ChorusFrequency The chorus LFO frequency [0.0, 20.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float DecayTime The amplitude envelope decay time (in ms)[0.0, 10000].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthFilterAlgorithm FilterAlgorithm The output filter circuit/algorithm type (one-pole ladder, ladder, state-variable)
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float FilterFrequency The output filter cutoff frequency (hz) [0.0, 20000.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float FilterQ The output filter resonance (Q) [0.5, 10].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthFilterType FilterType The output filter type (lowpass, highpass, bandpass, bandstop)
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float GainDb The overall gain to use for the synthesizer in dB [-90.0, 20.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float LFO1Frequency The frequency to use for LFO 1 (in hz) [0.0, 50.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float LFO1Gain The linear gain to use for LFO 1 [0.0, 1.0].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthLFOMode LFO1Mode The mode to use for LFO 1.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthLFOPatchType LFO1PatchType The built-in patch type to use for LFO 1 (you can route this to any patchable parameter using the Patches parameter)
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthLFOType LFO1Type The type of LFO to use for LFO 1.
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float LFO2Frequency The frequency to use for LFO 2 (in hz) [0.0, 50.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float LFO2Gain The linear gain to use for LFO 2 [0.0, 1.0].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthLFOMode LFO2Mode The mode to use for LFO 2.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthLFOPatchType LFO2PatchType The built-in patch type to use for LFO 2 (you can route this to any patchable parameter using the Patches parameter)
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthLFOType LFO2Type The type of LFO to use for LFO 2.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthModEnvBiasPatch ModEnvBiasPatchType The built-in patch type for the envelope modulator bias output. Bias is when the envelope output is offset by the sustain gain.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthModEnvPatch ModEnvPatchType The built-in patch type for the envelope modulator.
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ModulationEnvelopeAttackTime The modulation envelope attack time (in ms) [0.0, 10000].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ModulationEnvelopeDecayTime The modulation envelope decay time (in ms) [0.0, 10000].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ModulationEnvelopeDepth The "depth" (i.e. how much) modulation envelope to use. This scales the modulation envelope output. [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ModulationEnvelopeReleaseTime The modulation envelope release time (in ms) [0.0, 10000].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ModulationEnvelopeSustainGain The modulation envelope sustain gain (linear gain) [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc1Cents The cents (hundreds of a semitone) of oscillator 1. [-100.0, 100.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc1Gain The linear gain of oscillator 1 [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc1Octave The octave of oscillator 1. [-8.0, 8.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc1PulseWidth The pulsewidth of oscillator 1 (when using a square wave type oscillator). [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc1Semitones The semi-tones of oscillator 1. [-12.0, 12.0].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynth1OscType Osc1Type What type of oscillator to use for oscillator 1.
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc2Cents The cents (hundreds of a semitone) of oscillator 2. [-100.0, 100.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc2Gain The linear gain of oscillator 2 [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc2Octave The octave of oscillator 2. [-8.0, 8.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc2PulseWidth The pulsewidth of oscillator 2 (when using a square wave type oscillator). [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Osc2Semitones The semi-tones of oscillator 2. [-12.0, 12.0].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynth1OscType Osc2Type What type of oscillator to use for oscillator 2.
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Pan The stereo pan to use. 0.0 is center. -1.0 is left, 1.0 is right.
Public variable UProperty Category, EditAnywhere BlueprintReadWrite TArray< FEpicSynth1Patch > Patches The modular synth patch cords to use for the synth. Allows routing the LFO1/LFO2 and Modulation Envelope to any patchable destination.
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Portamento The amount of portamento to use, which is the amount of pitch sliding from current note to next [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float ReleaseTime The amplitude envelope release time (in ms) [0.0, 10000].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float Spread The amount of stereo spread to use between oscillator 1 and oscillator 2 [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float StereoDelayFeedback The amount of feedback in the stereo delay line [0.0, 1.0].
Public variable UProperty Category, EditAnywhere BlueprintReadWrite ESynthStereoDelayMode StereoDelayMode The stereo delay mode of the synth.
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float StereoDelayRatio The ratio between left and right stereo delay lines (wider value is more separation) [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float StereoDelayTime The stereo delay time (in ms) [0.0, 2000.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float StereoDelayWetlevel The output wet level to use for the stereo delay time [0.0, 1.0].
Public variable UProperty Category, EditAnywhere, Meta BlueprintReadWrite float SustainGain The amplitude envelope sustain amount (linear gain) [0.0, 1.0].

Constructors

  Type Name Description
Public function    

Ask questions and help your peers Developer Forums

Write your own tutorials or read those from others Learning Library

On this page