Gameplay Classes

Every gameplay class in Unreal Engine is comprised of a class header file (.h) and a class source file (.cpp). The class header contains the declarations of the class and its members, such as variables and functions, while the class source file is where the functionality of the class is defined by implementing the functions that belong to the class.

Classes in Unreal Engine have a standardized naming scheme so that you know instantly what kind of class it is simply by looking at the first letter, or prefix. The prefixes for gameplay classes are:

Adding Classes

The C++ Class Wizard sets up the header file and source file you need for your new class, and also updates your game module accordingly. The header file and source file automatically include the class declaration and class constructor, as well as Unreal Engine-specific code like the UCLASS() macro.

Class Headers

Gameplay classes in Unreal Engine generally have separate and unique class header files. These files are usually named to match the class being defined within, minus the A or U prefix, and using the .h file extension. So, the class header file for the AActor class is named Actor.h. Although Epic code follows these guidelines, no formal relationship between class name and source file name exists in the current engine.

Class header files for gameplay classes use standard C++ syntax in conjunction with specialized macros to simplify the process of declaring classes, variables, and functions.

At the top of each gameplay class header file, the generated header file (created automatically) needs to be included. So, at the top of ClassName.h, the following line must appear:

	#include "ClassName.generated.h"
Copy full snippet

Class Declaration

The class declaration defines the name of the class, what class it inherits from and, thus, any functions and variables it inherits. The class declaration also defines other engine and editor specific behavior that may be desired via class specifiers and metadata.

The syntax for declaring a class is as follows:

	UCLASS([specifier, specifier, ...], [meta(key=value, key=value, ...)])
	class ClassName : public ParentName
	{
		GENERATED_BODY()
	}
Copy full snippet

The declaration consists of a standard C++ class declaration for the class. Above the standard declaration, descriptors such as class specifiers and metadata are passed to the UCLASS macro. These are used to create the UClass for the class being declared, which can be thought of as the engine's specialized representation of the class. Also, the GENERATED_BODY() macro must be placed at the very beginning of the class body.

Class Specifiers

Class Implementation

All gameplay classes must use the GENERATED_BODY macro in order to be implemented properly. This is done in the class header (.h) file that defines the class and all of its variables and functions. A best practice is for the class source and header files to be named to match the class being implemented, minus the A or U prefix. So, the source file for the AActor class is named Actor.cpp, and its header file is named Actor.h. This is handled automatically for classes created by the "Add C++ Class" menu option within the editor.

The source file (.cpp) must include the header file (.h) that contains the C++ class declaration, which is usually generated automatically but can also be created manually (if desired). For example, the C++ declaration for the AActor class is automatically generated in the EngineClasses.h header file. This means the Actor.cpp file must include the EngineClasses.h file or another file that in turn includes it. Generally, you just include the header file for your game project, which will include the headers for the gameplay classes in your game project. In the case of AActor and EngineClasses.h, the EnginePrivate.h header is included, which includes Engine.h - the header file for the Engine project - and that includes the EngineClasses.h header file.

	#include "EnginePrivate.h"
Copy full snippet

You may also need to include additional files if you reference other classes in the implementation of the class's functions that are not included simply by the inclusion of that one file.

Class Constructor

UObjects use Constructors to set default values for properties and other variables as well as perform other necessary initialization. The class constructor is generally placed within the class implementation file, e.g. the AActor::AActor constructor is in Actor.cpp.

It is also possible to place the constructor inline in the class header file. However, if the constructor is in the class header file, the UClass must be declared with the CustomConstructor specifier as this prevents the automatic code generator from creating a constructor declaration in the header.

Constructor Format

The most basic form of a UObject constructor is shown below:

	UMyObject::UMyObject()
	{
		// Initialize Class Default Object properties here.
	}
Copy full snippet

This constructor initializes the Class Default Object (CDO), which is the master copy on which future instances of the class are based. There is also a secondary constructor that supports a special property-altering structure:

	UMyObject::UMyObject(const FObjectInitializer& ObjectInitializer)
	: Super(ObjectInitializer)
	{
		// Initialize CDO properties here.
	}
Copy full snippet

Although neither of the above constructors actually perform any initialization, the engine will have already initialized all fields to zero, NULL, or whatever value their default constructors implement. However, any initialization code written into the constructor will be applied to the CDO, and will therefore be copied to any new instances of the object created properly within the engine, as with CreateNewObject or SpawnActor.

The FObjectInitializer parameter that is passed into the constructor, despite being marked as const, can be configured via built-in mutable functions to override properties and subobjects. The UObject being created will be affected by these changes, and this can be used to change the values of registered properties or components.

	AUDKEmitterPool::AUDKEmitterPool(const FObjectInitializer& ObjectInitializer)
	: Super(ObjectInitializer.DoNotCreateDefaultSubobject(TEXT("SomeComponent")).DoNotCreateDefaultSubobject(TEXT("SomeOtherComponent")))
	{
		// Initialize CDO properties here.
	}
Copy full snippet

In the above case, the superclass was going to create the subobjects named "SomeComponent" and "SomeOtherComponent" in its constructor, but it will not do so because of the FObjectInitializer. In the following case, SomeProperty will default to 26 in the CDO, and thus in every fresh instance of AUTDemoHUD.

	AUTDemoHUD::AUTDemoHUD()
	{
		// Initialize CDO properties here.
		SomeProperty = 26;
	}
Copy full snippet

Constructor Statics and Helpers

Setting values for more complex data types, especially class references, names, and asset references, requires defining and instantiating a ConstructorStatics struct in the constructor to hold the various property values needed. This ConstructorStatics struct is only created the first time the constructor is run. On subsequent runs, it just copies a pointer, which makes it extremely fast. When the ConstructorStatics struct is created, the values are assigned to the members of the struct for accessing when assigning the values to the actual properties themselves later on in the constructor.

ContructorHelpers is a special namespace defined in ObjectBase.h that contains helper templates that are used to perform common actions specific to constructors. For instance, there are helper templates for finding references to assets or classes as well as creating and finding components.

Asset References

Ideally, asset references in classes do not exist. Hardcoded asset references are brittle and the preferred method is to use Blueprints for configuring asset properties. However, hardcoded references are still fully supported. We do not want to search for assets every time we construct an object, so these searches are only done once. This is accomplished via a static struct which ensures that we do our asset searches only once:

ConstructorHelpers::FObjectFinder finds a reference to the specified UObject using StaticLoadObject. This is generally used to reference assets stored in content packages. Reports failure if the object is not found.

	ATimelineTestActor::ATimelineTestActor()
	{
		// Structure to hold one-time initialization
		struct FConstructorStatics
		{
			ConstructorHelpers::FObjectFinder<UStaticMesh> Object0;
			FConstructorStatics()
			: Object0(TEXT("StaticMesh'/Game/UT3/Pickups/Pickups/Health_Large/Mesh/S_Pickups_Base_Health_Large.S_Pickups_Base_Health_Large'"))
			{
			}
		};
		static FConstructorStatics ConstructorStatics;

		// Property initialization

		StaticMesh = ConstructorStatics.Object0.Object;
	}
Copy full snippet

Class References

ConstructorHelpers::FClassFinder finds a reference to the specified UClass and reports a failure if the class is not found.

	APylon::APylon(const class FObjectInitializer& ObjectInitializer)
	: Super(ObjectInitializer)
	{
		// Structure to hold one-time initialization
		static FClassFinder<UNavigationMeshBase> ClassFinder(TEXT("class'Engine.NavigationMeshBase'"));
		if (ClassFinder.Succeeded())
		{
			NavMeshClass = ClassFinder.Class;
		}
		else
		{
			NavMeshClass = nullptr;
		}
	}
Copy full snippet

In many cases, you can just use USomeClass::StaticClass() and skip the complexity of the ClassFinder altogether. For example, you can use the method below in most circumstances:

	NavMeshClass = UNavigationMeshBase::StaticClass();
Copy full snippet

For cross-module references, it is probably better to use the ClassFinder method.

Components and Sub-Objects

Creating component subobjects and attaching them to the actor's hierarchy can also be done inside of the constructor. When spawning an actor, its components will be cloned from the CDO. In order to ensure that components are always created, destroyed, and properly garbage-collected, a pointer to every component created in the constructor should be stored in a UPROPERTY of the owning class.

	UCLASS()
	class AWindPointSource : public AActor
	{
		GENERATED_BODY()
		public:

		UPROPERTY()
		UWindPointSourceComponent* WindPointSource;

		UPROPERTY()
		UDrawSphereComponent* DisplaySphere;
	};

	AWindPointSource::AWindPointSource()
	{
		// Create a new component and give it a name.
		WindPointSource = CreateDefaultSubobject<UWindPointSourceComponent>(TEXT("WindPointSourceComponent0"));

		// Set our new component as the RootComponent of this actor, or attach it to the root if one already exists.
		if (RootComponent == nullptr)
		{
			RootComponent = WindPointSource;
		}
		else
		{
			WindPointSource->AttachTo(RootComponent);
		}

		// Create a second component. This will be attached to the component we just created.
		DisplaySphere = CreateDefaultSubobject<UDrawSphereComponent>(TEXT("DrawSphereComponent0"));
		DisplaySphere->AttachTo(RootComponent);

		// Set some properties on the new component.
		DisplaySphere->ShapeColor.R = 173;
		DisplaySphere->ShapeColor.G = 239;
		DisplaySphere->ShapeColor.B = 231;
		DisplaySphere->ShapeColor.A = 255;
		DisplaySphere->AlwaysLoadOnClient = false;
		DisplaySphere->AlwaysLoadOnServer = false;
		DisplaySphere->bAbsoluteScale = true;
	}
Copy full snippet

Modifying a component belonging to the parent class is generally not necessary. However, a current list of all attached components, including components created by the parent class, is available by calling GetAttachParent, GetParentComponents, GetNumChildrenComponents, GetChildrenComponents, and GetChildComponent on any USceneComponent, including the root component.