This tutorial demonstrates the process of creating a simple Layered Material comprised of two layers: chrome and snow. The final Layered Material uses a world-aligned blend to automatically place snow on the upward facing surfaces of the mesh, effectively switching between the two Materials. The blend function always checks for the top surface, meaning even as you rotate the object, the snow Material remains on top, as shown in the image below:
Generally when creating Layered Materials, it is common to create each layer as a Material and copy/paste your node network into a new Material Function. To save time, this tutorial builds each layer within Functions to begin with.
Simple Chrome
Chrome Textures | |
 |  |
T_ExampleLayers_Metal_1_BC.png | T_ExampleLayers_Metal01_N.png |
(Right-click and Save As) | (Right-click and Save As) |
The base layer is a simple chrome Material with some subtle surface imperfections to add visual interest. To help demonstrate editability, the Material includes several inputs that allow you to fine-tune the overall look.
Right-click in the Content Browser, click Materials and select Material Function in the context menu.
Name the Material Function Layer_Chrome.
Double-click the Material Function to open it in the Material Editor.
Right-click in the Material Graph, and then search for and select Make Material Attributes in the context menu.
Connect the Make Material Attributes node to the Output Result node.
Chrome Material Network
The Material Graph for the chrome layer is shown below, with a breakdown beneath the image so you can replicate it easily. The two textures used are T_ExampleLayers_Metal_1_BC.png for the Base Color and Roughness, and T_ExampleLayers_Metal01_N.png for the normal map, both downloadable at the top of this page.
See the following notes explaining the four comment blocks in the Material Graph.
Base Color - For the Base Color, a Linear Interpolate (LERP) is used to blend between the base chrome color and a very dark gray value (0.3). For the base color, create a Function Input node and name it Tint. Make sure the input type is set to Vector3 in the Details Panel, which allows you to input a color into the function to change the tint of the chrome. The red channel of the T_ExampleLayers_Metal_1_BC texture is used to drive the interpolation between the two values.
Metallic - Since this is a metal Material, a value of 1 is passed into the Metallic input.
Roughness - Roughness should generally be very low for a chrome Material, but some subtle variation can add depth to the overall look of the Material. In this case, the red channel of the chrome texture is used to LERP between values of 0.2 and 0.4. This means darker areas on the texture map will have slightly higher roughness than the light areas.
Customizable Normal - This network simply takes in a tangent space normal map and separates the green and red channels, which control the bulk of the map's detail. Each channel is multiplied by a value supplied from another Function Input. This input is set to a Scalar type and named Normal Multiplier, with a default value of 1.0. Using an AppendVector node, the results are appended together and then appended to the blue channel of the normal map. The result is that the user has the power to adjust the height of the normal by changing the Normal Multiplier value.
Make sure you compile and save your Material Function when finished.
Simple Snow
Snow Textures | |
 |  |
T_Cave_Ice_Tiling_D.png | T_Cave_Ice_Noise_N.png |
(Right-click and Save As) | (Right-click and Save As) |
Download the two textures above and import them into Unreal Engine. Follow the steps below to create a second Material Function for the snow layer.
Right-click in the Content Browser, click Materials and select Material Function in the context menu.
Name the Material Function Layer_Snow.
Double-click the Material Function to open it in the Material Editor.
Right-click in the Material Graph, and search for Make Material Attributes in the context menu, and add it to the graph.
Connect the Make Material Attributes node to the Output Result node.
Snow Layer Network
Below is a simple breakdown of the snow Material Graph. This layer uses the T_Cave_Ice_Tiling_D.png and T_Cave_Ice_Noise_N.png textures, both downloadable at the top of this page.
Base Color - This is the only relatively sophisticated part of the network, and only because it uses the FuzzyShading Material Function. This function simply keeps the texture from getting too dark when the Material is receiving light. This is similar to the way light passes through fibrous surfaces. This makes it perfect for velvet, moss, or in this case, snow. Some contrast is removed from the Base Color texture (T_Cave_Ice_Tiling_D.png) by raising it to the power of 0.3.
Next, plug the result into a FuzzyShading Material Function, which you can insert from the Functions tab in the Material Editor palette. Set Core Darkness to 0, Power to 1, andEdgeBrightness to 0.5. Finally, multiply the whole thing by a very pale blue color (R=0.8, G=0.9, B=0.95) to give it a cold, icy color cast.
Metallic - This is a non-metallic surface, so Metallic is set to 0.
Roughness - Snow should shine a little bit when the light hits it just right, so the red channel of the T_Cave_Ice_Tiling_D.png texture is used to drive a Lerp between 0.6 and 0.3.
Normal - The normal map on its own is a little bit too strong. One way to reduce the effect of the tangent space normal map is to double the strength of the blue channel. This is done by multiplying the normal map by a Constant3 Vector with a value of (1,1,2).
Save your result when finished!
Layered Material
You can now create a Material and blend the two layer functions together. This example is configured so that the snow always appears on the top of the surface. The Material also contains some parameters to make it customizable in Material instances.
In the Content Browser, click the Add New button and choose Material from the context menu.
Name your new Material Mat_SnowyChrome.
Double-click the Material to open it in the Material Editor.
Drag your Layer_Chrome and Layer_Snow Material Functions from the Content Browser into the Material Graph.
Click in the background of the Material Graph to display the base Material Properties in the Details panel. Enable Use Material Attributes by checking the box.
From the Palette, add a MatLayerBlend_Simple Material Function, as well as a WorldAlignedBlend Function. The MatLayerBlend_Simple will execute the transition from chrome to snow, and the World_Aligned_Blend will power the Layer Blend based on the direction the surface is pointed.
Layered Material Network
Below is a breakdown of the Mat_SnowyChrome Material network, along with descriptions for each of the commented areas.
Chrome Setup - Two parameters are connected to the Layer_Chrome Material Function. The first is a Scalar Parameter named Chrome Normal, which is used to drive the NormalMultiplier input. The second is a Vector Parameter named ChromeTint that is driving the Tint input. These parameters allow you to alter the strength of the normal map, and change the tint of the chrome when the Material is instanced later.
Snow Setup - No additional nodes are needed. The Layer_Snow Material Function is plugged directly into the blend node.
World Aligned Blend Setup - The WorldAlignedBlend node controls the position and sharpness of the Material blend. Set the Blend Sharpness value to 10. Then create a Scalar Parameter named BlendBias and connect it to the Blend Bias input. This allows you to adjust the vertical position on your mesh where the blend occurs.
MatLayerBlend - This node contains the logic used to drive the blend. In this case, the base Material is Layer_Chrome and the top Material is Layer_Snow. The WorldAlignedBlend is plugged into the Alpha input to drive the the transition.
Save your Material when done!
Instancing a Layered Material
Since this Material contains two parameters, you can now create a Material Instance and customize aspects of the Material Layers.
If you included the Starter Content in your project, you will have a set of chairs and a table to apply the new Material to. If not, feel free to place some of your own assets in the scene.
Right-click on the Mat_SnowyChrome Material and choose Create Material Instance in the context menu. The default name should be fine.
Drag the Material Instance asset from the Content Browser onto one of the objects in the scene.
Double-click the Material Instance to open it in the Material Instance Editor. You can override the tint of the chrome, the depth of the chrome's normal map, and how much snow has fallen on top of it.
