DMX Plugin Settings | Unreal Engine 4.27 Documentation

This page is not available in the language you have chosen. It will be displayed in English by default. If you would like to view it in a different language, you can try selecting another language.

This page describes the settings for the DMX Plugin.

Plugin Setting	Description
Communication Settings
Input Ports	An array of input configurations for receiving DMX. Refer to the Input Ports section below for more details.
Output Ports	An array of output configurations for sending DMX. Refer to the Output Ports section below for more details
DMX Send Rate	The rate in hertz (Hz) to send out DMX. Default value is 30.
Send DMX by default	When enabled, the project sends DMX over the network. Default value is False.
Receive DMX by default	When enabled, the project receives DMX from the network. Default value is False.
Fixture Settings
Fixture Categories	Defines the fixture categories using a set of text elements. These categories are used inside your DMX Library inside the Fixture Type tab for the purposes of organizing and grouping the fixtures that you add to your scene. By default, the plugin provides five generic categories.
Fixture Attributes	Internal naming convention used as an alias for imported fixture properties Attribute Names: These names act as aliases for any functions that are imported into the project via GDTF files. Attributes are easily accessible from any part of the project and remove the dependence upon DMX libraries. Additionally, attributes solve the problem of mapping unpredictable imported function names to a generic list of terms that are easy to reference via dropdowns anywhere in the project. Attribute Keywords: Keywords are the input names mapped to the defined attribute name. Any number of keywords can be mapped to a single attribute name, just ensure each keyword is separated by a comma or space.

DMX Ports can be referenced and used within the DMX Library. You can have different DMX Libraries using different Ports configurations to avoid DMX data collisions.

Input Ports

Plugin Setting	Description
Port Name	User-defined name for the input port for easy identification.
Protocol Name	Specifies which DMX protocol to use. Options include: Art-Net sACN
Network Interface Card IP Address	The IP Address for the network card used for DMX control. By default, this is set to 0.0.0.0 which selects the primary network card determined by your operating system.
Local Universe Start	Location of the first Universe to receive DMX.
Amount of Universes	Number of Universes to use in the project.
Extern Universe Start	Offset to apply to the Universe start for external software or hardware. For example, if Local Universe Start is set to 1 and Extern Universe Start is set to 20. Unreal will remap Universe 1 locally to Universe 20 on the receiving hardware.

Output Ports

Plugin Setting	Description
Port Name	User-defined name for the input port for easy identification.
Protocol Name	Specifies which DMX protocol to use. Options include: Art-Net sACN
Communication Type	The type of communication to use with the port. Options include: Broadcast Unicast
Network Interface Card IP Address	The IP Address for the network card used for DMX control. By default, this is set to 0.0.0.0 which selects the primary network card determined by your operating system.
Input into Engine	When enabled, output to this port is input to the engine. It will only show under output ports and will not be visible in Monitors as input.
Local Universe Start	Location of the first Universe to send DMX.
Amount of Universes	Number of Universes to use in the project.
Extern Universe Start	Offset to apply to the Universe start for external software or hardware. For example, if Local Universe Start is set to 1 and Extern Universe Start is set to 20. Unreal will remap Universe 1 locally to Universe 20 on the receiving hardware.