unreal.Character

class unreal.Character(outer=None, name='None')

Bases: unreal.Pawn

Characters are Pawns that have a mesh, collision, and built-in movement logic. They are responsible for all physical interaction between the player or AI and the world, and also implement basic networking and input models. They are designed for a vertically-oriented player representation that can walk, jump, fly, and swim through the world using CharacterMovementComponent. see: APawn, UCharacterMovementComponent see: https://docs.unrealengine.com/latest/INT/Gameplay/Framework/Pawn/Character/

C++ Source:

  • Module: Engine

  • File: Character.h

Editor Properties: (see get_editor_property/set_editor_property)

  • actor_guid (Guid): [Read-Only] The GUID for this actor.

  • ai_controller_class (type(Class)): [Read-Write] Default class to use when pawn is controlled by AI.

  • allow_tick_before_begin_play (bool): [Read-Write] Whether we allow this Actor to tick before it receives the BeginPlay event. Normally we don’t tick actors until after BeginPlay; this setting allows this behavior to be overridden. This Actor must be able to tick for this setting to be relevant.

  • always_relevant (bool): [Read-Write] Always relevant for network (overrides bOnlyRelevantToOwner).

  • auto_destroy_when_finished (bool): [Read-Write] If true then destroy self when “finished”, meaning all relevant components report that they are done and no timelines or timers are in flight.

  • auto_possess_ai (AutoPossessAI): [Read-Write] Determines when the Pawn creates and is possessed by an AI Controller (on level start, when spawned, etc). Only possible if AIControllerClassRef is set, and ignored if AutoPossessPlayer is enabled. see: AutoPossessPlayer

  • auto_possess_player (AutoReceiveInput): [Read-Write] Determines which PlayerController, if any, should automatically possess the pawn when the level starts or when the pawn is spawned. see: AutoPossessAI

  • auto_receive_input (AutoReceiveInput): [Read-Write] Automatically registers this actor to receive input from a player.

  • base_eye_height (float): [Read-Write] Base eye height above collision center.

  • block_input (bool): [Read-Write] If true, all input on the stack below this actor will not be considered

  • can_affect_navigation_generation (bool): [Read-Write] If set to false (default) given pawn instance will never affect navigation generation.

    Setting it to true will result in using regular AActor’s navigation relevancy calculation to check if this pawn instance should affect navigation generation Use SetCanAffectNavigationGeneration to change this value at runtime. Note that modifying this value at runtime will result in any navigation change only if runtime navigation generation is enabled.

  • can_be_damaged (bool): [Read-Write] Whether this actor can take damage. Must be true for damage events (e.g. ReceiveDamage()) to be called. see: https://www.unrealengine.com/blog/damage-in-ue4 see: TakeDamage(), ReceiveDamage()

  • can_be_in_cluster (bool): [Read-Write] If true, this actor can be put inside of a GC Cluster to improve Garbage Collection performance

  • capsule_component (CapsuleComponent): [Read-Only] The CapsuleComponent being used for movement collision (by CharacterMovement). Always treated as being vertically aligned in simple collision check functions.

  • character_movement (CharacterMovementComponent): [Read-Only] Movement component used for movement logic in various movement modes (walking, falling, etc), containing relevant settings and functions to control movement.

  • crouched_eye_height (float): [Read-Write] Default crouched eye height

  • custom_time_dilation (float): [Read-Write] Allow each actor to run at a different time speed. The DeltaTime for a frame is multiplied by the global TimeDilation (in WorldSettings) and this CustomTimeDilation for this actor’s tick.

  • default_update_overlaps_method_during_level_streaming (ActorUpdateOverlapsMethod): [Read-Only] Default value taken from config file for this class when ‘UseConfigDefault’ is chosen for ‘UpdateOverlapsMethodDuringLevelStreaming’. This allows a default to be chosen per class in the matching config. For example, for Actor it could be specified in DefaultEngine.ini as:

    [/Script/Engine.Actor] DefaultUpdateOverlapsMethodDuringLevelStreaming = OnlyUpdateMovable

    Another subclass could set their default to something different, such as:

    [/Script/Engine.BlockingVolume] DefaultUpdateOverlapsMethodDuringLevelStreaming = NeverUpdate see: UpdateOverlapsMethodDuringLevelStreaming

  • enable_auto_lod_generation (bool): [Read-Write] If true, and if World setting has bEnableHierarchicalLOD equal to true, then it will generate LODActor from groups of clustered Actor

  • find_camera_component_when_view_target (bool): [Read-Write] If true, this actor should search for an owned camera component to view through when used as a view target.

  • generate_overlap_events_during_level_streaming (bool): [Read-Write] If true, this actor will generate overlap Begin/End events when spawned as part of level streaming, which includes initial level load. You might enable this is in the case where a streaming level loads around an actor and you want Begin/End overlap events to trigger. see: UpdateOverlapsMethodDuringLevelStreaming

  • hidden (bool): [Read-Write] Allows us to only see this Actor in the Editor, and not in the actual game. see: SetActorHiddenInGame()

  • ignores_origin_shifting (bool): [Read-Write] Whether this actor should not be affected by world origin shifting.

  • initial_life_span (float): [Read-Write] How long this Actor lives before dying, 0=forever. Note this is the INITIAL value and should not be modified once play has begun.

  • input_priority (int32): [Read-Write] The priority of this input component when pushed in to the stack.

  • instigator (Pawn): [Read-Write] Pawn responsible for damage and other gameplay events caused by this actor.

  • is_crouched (bool): [Read-Write] Set by character movement to specify that this Character is currently crouched.

  • is_editor_only_actor (bool): [Read-Write] Whether this actor is editor-only. Use with care, as if this actor is referenced by anything else that reference will be NULL in cooked builds

  • jump_current_count (int32): [Read-Only] Tracks the current number of jumps performed. This is incremented in CheckJumpInput, used in CanJump_Implementation, and reset in OnMovementModeChanged. When providing overrides for these methods, it’s recommended to either manually increment / reset this value, or call the Super:: method.

  • jump_current_count_pre_jump (int32): [Read-Only] Represents the current number of jumps performed before CheckJumpInput modifies JumpCurrentCount. This is set in CheckJumpInput and is used in SetMoveFor and PrepMoveFor instead of JumpCurrentCount since CheckJumpInput can modify JumpCurrentCount. When providing overrides for these methods, it’s recommended to either manually set this value, or call the Super:: method.

  • jump_force_time_remaining (float): [Read-Only] Amount of jump force time remaining, if JumpMaxHoldTime > 0.

  • jump_key_hold_time (float): [Read-Only] Jump key Held Time. This is the time that the player has held the jump key, in seconds.

  • jump_max_count (int32): [Read-Write] The max number of jumps the character can perform. Note that if JumpMaxHoldTime is non zero and StopJumping is not called, the player may be able to perform and unlimited number of jumps. Therefore it is usually best to call StopJumping() when jump input has ceased (such as a button up event).

  • jump_max_hold_time (float): [Read-Write] The max time the jump key can be held. Note that if StopJumping() is not called before the max jump hold time is reached, then the character will carry on receiving vertical velocity. Therefore it is usually best to call StopJumping() when jump input has ceased (such as a button up event).

  • last_hit_by (Controller): [Read-Write] Controller of the last Actor that caused us damage.

  • mesh (SkeletalMeshComponent): [Read-Only] The main skeletal mesh associated with this Character (optional sub-object).

  • min_net_update_frequency (float): [Read-Write] Used to determine what rate to throttle down to when replicated properties are changing infrequently

  • movement_mode_changed_delegate (MovementModeChangedSignature): [Read-Write] Multicast delegate for MovementMode changing.

  • net_cull_distance_squared (float): [Read-Write] Square of the max distance from the client’s viewpoint that this actor is relevant and will be replicated.

  • net_dormancy (NetDormancy): [Read-Write] Dormancy setting for actor to take itself off of the replication list without being destroyed on clients.

  • net_load_on_client (bool): [Read-Write] This actor will be loaded on network clients during map load

  • net_priority (float): [Read-Write] Priority for this actor when checking for replication in a low bandwidth or saturated situation, higher priority means it is more likely to replicate

  • net_update_frequency (float): [Read-Write] How often (per second) this actor will be considered for replication, used to determine NetUpdateTime

  • net_use_owner_relevancy (bool): [Read-Write] If actor has valid Owner, call Owner’s IsNetRelevantFor and GetNetPriority

  • on_actor_begin_overlap (ActorBeginOverlapSignature): [Read-Write] Called when another actor begins to overlap this actor, for example a player walking into a trigger. For events when objects have a blocking collision, for example a player hitting a wall, see ‘Hit’ events. note: Components on both this and the other Actor must have bGenerateOverlapEvents set to true to generate overlap events.

  • on_actor_end_overlap (ActorEndOverlapSignature): [Read-Write] Called when another actor stops overlapping this actor. note: Components on both this and the other Actor must have bGenerateOverlapEvents set to true to generate overlap events.

  • on_actor_hit (ActorHitSignature): [Read-Write] Called when this Actor hits (or is hit by) something solid. This could happen due to things like Character movement, using Set Location with ‘sweep’ enabled, or physics simulation. For events when objects overlap (e.g. walking into a trigger) see the ‘Overlap’ event. note: For collisions during physics simulation to generate hit events, ‘Simulation Generates Hit Events’ must be enabled.

  • on_begin_cursor_over (ActorBeginCursorOverSignature): [Read-Write] Called when the mouse cursor is moved over this actor if mouse over events are enabled in the player controller.

  • on_character_movement_updated (CharacterMovementUpdatedSignature): [Read-Write] Event triggered at the end of a CharacterMovementComponent movement update. This is the preferred event to use rather than the Tick event when performing custom updates to CharacterMovement properties based on the current state. This is mainly due to the nature of network updates, where client corrections in position from the server can cause multiple iterations of a movement update, which allows this event to update as well, while a Tick event would not.

  • on_clicked (ActorOnClickedSignature): [Read-Write] Called when the left mouse button is clicked while the mouse is over this actor and click events are enabled in the player controller.

  • on_destroyed (ActorDestroyedSignature): [Read-Write] Event triggered when the actor has been explicitly destroyed.

  • on_end_cursor_over (ActorEndCursorOverSignature): [Read-Write] Called when the mouse cursor is moved off this actor if mouse over events are enabled in the player controller.

  • on_end_play (ActorEndPlaySignature): [Read-Write] Event triggered when the actor is being deleted or removed from a level.

  • on_input_touch_begin (ActorOnInputTouchBeginSignature): [Read-Write] Called when a touch input is received over this actor when touch events are enabled in the player controller.

  • on_input_touch_end (ActorOnInputTouchEndSignature): [Read-Write] Called when a touch input is received over this component when touch events are enabled in the player controller.

  • on_input_touch_enter (ActorBeginTouchOverSignature): [Read-Write] Called when a finger is moved over this actor when touch over events are enabled in the player controller.

  • on_input_touch_leave (ActorEndTouchOverSignature): [Read-Write] Called when a finger is moved off this actor when touch over events are enabled in the player controller.

  • on_reached_jump_apex (CharacterReachedApexSignature): [Read-Write] Broadcast when Character’s jump reaches its apex. Needs CharacterMovement->bNotifyApex = true

  • on_released (ActorOnReleasedSignature): [Read-Write] Called when the left mouse button is released while the mouse is over this actor and click events are enabled in the player controller.

  • on_take_any_damage (TakeAnyDamageSignature): [Read-Write] Called when the actor is damaged in any way.

  • on_take_point_damage (TakePointDamageSignature): [Read-Write] Called when the actor is damaged by point damage.

  • on_take_radial_damage (TakeRadialDamageSignature): [Read-Write] Called when the actor is damaged by radial damage.

  • only_relevant_to_owner (bool): [Read-Write] If true, this actor is only relevant to its owner. If this flag is changed during play, all non-owner channels would need to be explicitly closed.

  • optimize_bp_component_data (bool): [Read-Write] Whether to cook additional data to speed up spawn events at runtime for any Blueprint classes based on this Actor. This option may slightly increase memory usage in a cooked build.

  • pivot_offset (Vector): [Read-Write] Local space pivot offset for the actor, only used in the editor

  • player_state (PlayerState): [Read-Write] If Pawn is possessed by a player, points to its Player State. Needed for network play as controllers are not replicated to clients.

  • pressed_jump (bool): [Read-Write] When true, player wants to jump

  • primary_actor_tick (ActorTickFunction): [Read-Write] Primary Actor tick function, which calls TickActor(). Tick functions can be configured to control whether ticking is enabled, at what time during a frame the update occurs, and to set up tick dependencies. see: https://docs.unrealengine.com/latest/INT/API/Runtime/Engine/Engine/FTickFunction/ see: AddTickPrerequisiteActor(), AddTickPrerequisiteComponent()

  • proxy_jump_force_started_time (float): [Read-Only] Track last time a jump force started for a proxy.

  • relevant_for_level_bounds (bool): [Read-Write] If true, this actor’s component’s bounds will be included in the level’s bounding box unless the Actor’s class has overridden IsLevelBoundsRelevant

  • replay_rewindable (bool): [Read-Write] If true, this actor will only be destroyed during scrubbing if the replay is set to a time before the actor existed. Otherwise, RewindForReplay will be called if we detect the actor needs to be reset. Note, this Actor must not be destroyed by gamecode, and RollbackViaDeletion may not be used.

  • replicate_movement (bool): [Read-Write] If true, replicate movement/location related properties. Actor must also be set to replicate. see: SetReplicates() see: https://docs.unrealengine.com/latest/INT/Gameplay/Networking/Replication/

  • replicated_movement (RepMovement): [Read-Write] Used for replication of our RootComponent’s position and velocity

  • replicates (bool): [Read-Write] If true, this actor will replicate to remote machines see: SetReplicates()

  • root_component (SceneComponent): [Read-Write] The component that defines the transform (location, rotation, scale) of this Actor in the world, all other components must be attached to this one somehow

  • spawn_collision_handling_method (SpawnActorCollisionHandlingMethod): [Read-Write] Controls how to handle spawning this actor in a situation where it’s colliding with something else. “Default” means AlwaysSpawn here.

  • sprite_scale (float): [Read-Write] The scale to apply to any billboard components in editor builds (happens in any WITH_EDITOR build, including non-cooked games).

  • tags (Array(Name)): [Read-Write] Array of tags that can be used for grouping and categorizing.

  • update_overlaps_method_during_level_streaming (ActorUpdateOverlapsMethod): [Read-Write] Condition for calling UpdateOverlaps() to initialize overlap state when loaded in during level streaming. If set to ‘UseConfigDefault’, the default specified in ini (displayed in ‘DefaultUpdateOverlapsMethodDuringLevelStreaming’) will be used. If overlaps are not initialized, this actor and attached components will not have an initial state of what objects are touching it, and overlap events may only come in once one of those objects update overlaps themselves (for example when moving). However if an object touching it does initialize state, both objects will know about their touching state with each other. This can be a potentially large performance savings during level loading and streaming, and is safe if the object and others initially overlapping it do not need the overlap state because they will not trigger overlap notifications.

    Note that if ‘bGenerateOverlapEventsDuringLevelStreaming’ is true, overlaps are always updated in this case, but that flag determines whether the Begin/End overlap events are triggered. see: bGenerateOverlapEventsDuringLevelStreaming, DefaultUpdateOverlapsMethodDuringLevelStreaming, GetUpdateOverlapsMethodDuringLevelStreaming()

  • use_controller_rotation_pitch (bool): [Read-Write] If true, this Pawn’s pitch will be updated to match the Controller’s ControlRotation pitch, if controlled by a PlayerController.

  • use_controller_rotation_roll (bool): [Read-Write] If true, this Pawn’s roll will be updated to match the Controller’s ControlRotation roll, if controlled by a PlayerController.

  • use_controller_rotation_yaw (bool): [Read-Write] If true, this Pawn’s yaw will be updated to match the Controller’s ControlRotation yaw, if controlled by a PlayerController.

  • was_jumping (bool): [Read-Only] Tracks whether or not the character was already jumping last frame.

cache_initial_mesh_offset(mesh_relative_location, mesh_relative_rotation)None

Cache mesh offset from capsule. This is used as the target for network smoothing interpolation, when the mesh is offset with lagged smoothing. This is automatically called during initialization; call this at runtime if you intend to change the default mesh offset from the capsule. see: GetBaseTranslationOffset(), GetBaseRotationOffset()

Parameters
  • mesh_relative_location (Vector) –

  • mesh_relative_rotation (Rotator) –

can_crouch()bool
Returns

true if this character is currently able to crouch (and is not currently crouched)

Return type

bool

can_jump()bool

Check if the character can jump in the current state.

The default implementation may be overridden or extended by implementing the custom CanJump event in Blueprints.

Returns

Whether the character can jump in the current state.

Return type

bool

can_jump_internal()bool

Customizable event to check if the character can jump in the current state. Default implementation returns true if the character is on the ground and not crouching, has a valid CharacterMovementComponent and CanEverJump() returns true. Default implementation also allows for ‘hold to jump higher’ functionality: As well as returning true when on the ground, it also returns true when GetMaxJumpTime is more than zero and IsJumping returns true.

Returns

Whether the character can jump in the current state.

Return type

bool

property capsule_component

[Read-Only] The CapsuleComponent being used for movement collision (by CharacterMovement). Always treated as being vertically aligned in simple collision check functions.

Type

(CapsuleComponent)

property character_movement

[Read-Only] Movement component used for movement logic in various movement modes (walking, falling, etc), containing relevant settings and functions to control movement.

Type

(CharacterMovementComponent)

crouch(client_simulation=False)None

Request the character to start crouching. The request is processed on the next update of the CharacterMovementComponent. see: OnStartCrouch see: IsCrouched see: CharacterMovement->WantsToCrouch

Parameters

client_simulation (bool) –

property crouched_eye_height

[Read-Write] Default crouched eye height

Type

(float)

get_anim_root_motion_translation_scale()float

Returns current value of AnimRootMotionScale

Returns

Return type

float

get_base_rotation_offset()Rotator

Get the saved rotation offset of mesh. This is how much extra rotation is applied from the capsule rotation.

Returns

Return type

Rotator

get_base_translation_offset()Vector

Get the saved translation offset of mesh. This is how much extra offset is applied from the center of the capsule.

Returns

Return type

Vector

get_current_montage()AnimMontage

Return current playing Montage *

Returns

Return type

AnimMontage

has_any_root_motion()bool

True if we are playing root motion from any source right now (anim root motion, root motion source)

Returns

Return type

bool

property is_crouched

[Read-Only] Set by character movement to specify that this Character is currently crouched.

Type

(bool)

is_jump_providing_force()bool

True if jump is actively providing a force, such as when the jump key is held and the time it has been held is less than JumpMaxHoldTime. see: CharacterMovement->IsFalling

Returns

Return type

bool

is_jumping()

deprecated: ‘is_jumping’ was renamed to ‘is_jump_providing_force’.

is_playing_networked_root_motion_montage()bool

True if we are playing Root Motion right now, through a Montage with RootMotionMode == ERootMotionMode::RootMotionFromMontagesOnly. This means code path for networked root motion is enabled.

Returns

Return type

bool

is_playing_root_motion()bool

True if we are playing Anim root motion right now

Returns

Return type

bool

jump()None

Make the character jump on the next update. If you want your character to jump according to the time that the jump key is held, then you can set JumpMaxHoldTime to some non-zero value. Make sure in this case to call StopJumping() when you want the jump’s z-velocity to stop being applied (such as on a button up event), otherwise the character will carry on receiving the velocity until JumpKeyHoldTime reaches JumpMaxHoldTime.

property jump_current_count

[Read-Only] Tracks the current number of jumps performed. This is incremented in CheckJumpInput, used in CanJump_Implementation, and reset in OnMovementModeChanged. When providing overrides for these methods, it’s recommended to either manually increment / reset this value, or call the Super:: method.

Type

(int32)

property jump_current_count_pre_jump

[Read-Only] Represents the current number of jumps performed before CheckJumpInput modifies JumpCurrentCount. This is set in CheckJumpInput and is used in SetMoveFor and PrepMoveFor instead of JumpCurrentCount since CheckJumpInput can modify JumpCurrentCount. When providing overrides for these methods, it’s recommended to either manually set this value, or call the Super:: method.

Type

(int32)

property jump_force_time_remaining

[Read-Only] Amount of jump force time remaining, if JumpMaxHoldTime > 0.

Type

(float)

property jump_key_hold_time

[Read-Only] Jump key Held Time. This is the time that the player has held the jump key, in seconds.

Type

(float)

property jump_max_count

[Read-Write] The max number of jumps the character can perform. Note that if JumpMaxHoldTime is non zero and StopJumping is not called, the player may be able to perform and unlimited number of jumps. Therefore it is usually best to call StopJumping() when jump input has ceased (such as a button up event).

Type

(int32)

property jump_max_hold_time

[Read-Write] The max time the jump key can be held. Note that if StopJumping() is not called before the max jump hold time is reached, then the character will carry on receiving vertical velocity. Therefore it is usually best to call StopJumping() when jump input has ceased (such as a button up event).

Type

(float)

launch(launch_velocity, xy_override, z_override)

deprecated: ‘launch’ was renamed to ‘launch_character’.

launch_character(launch_velocity, xy_override, z_override)None

Set a pending launch velocity on the Character. This velocity will be processed on the next CharacterMovementComponent tick, and will set it to the “falling” state. Triggers the OnLaunched event.

Parameters
  • launch_velocity (Vector) – is the velocity to impart to the Character

  • xy_override (bool) – if true replace the XY part of the Character’s velocity instead of adding to it.

  • z_override (bool) – if true replace the Z component of the Character’s velocity instead of adding to it.

property mesh

[Read-Only] The main skeletal mesh associated with this Character (optional sub-object).

Type

(SkeletalMeshComponent)

property movement_mode_changed_delegate

[Read-Write] Multicast delegate for MovementMode changing.

Type

(MovementModeChangedSignature)

property on_character_movement_updated

[Read-Write] Event triggered at the end of a CharacterMovementComponent movement update. This is the preferred event to use rather than the Tick event when performing custom updates to CharacterMovement properties based on the current state. This is mainly due to the nature of network updates, where client corrections in position from the server can cause multiple iterations of a movement update, which allows this event to update as well, while a Tick event would not.

Type

(CharacterMovementUpdatedSignature)

on_end_crouch(half_height_adjust, scaled_half_height_adjust)None

Event when Character stops crouching.

Parameters
  • half_height_adjust (float) – difference between default collision half-height, and actual crouched capsule half-height.

  • scaled_half_height_adjust (float) – difference after component scale is taken in to account.

on_jumped()None

Event fired when the character has just started jumping

on_landed(hit)None

Called upon landing when falling, to perform actions based on the Hit result. Note that movement mode is still “Falling” during this event. Current Velocity value is the velocity at the time of landing. Consider OnMovementModeChanged() as well, as that can be used once the movement mode changes to the new mode (most likely Walking). see: OnMovementModeChanged()

Parameters

hit (HitResult) – Result describing the landing that resulted in a valid landing spot.

on_launched(launch_velocity, xy_override, z_override)None

Let blueprint know that we were launched

Parameters
  • launch_velocity (Vector) –

  • xy_override (bool) –

  • z_override (bool) –

on_movement_mode_changed(prev_movement_mode, new_movement_mode, prev_custom_mode, new_custom_mode)None

Called from CharacterMovementComponent to notify the character that the movement mode has changed.

Parameters
  • prev_movement_mode (MovementMode) – Movement mode before the change

  • new_movement_mode (MovementMode) – New movement mode

  • prev_custom_mode (uint8) – Custom mode before the change (applicable if PrevMovementMode is Custom)

  • new_custom_mode (uint8) – New custom mode (applicable if NewMovementMode is Custom)

property on_reached_jump_apex

[Read-Write] Broadcast when Character’s jump reaches its apex. Needs CharacterMovement->bNotifyApex = true

Type

(CharacterReachedApexSignature)

on_start_crouch(half_height_adjust, scaled_half_height_adjust)None

Event when Character crouches.

Parameters
  • half_height_adjust (float) – difference between default collision half-height, and actual crouched capsule half-height.

  • scaled_half_height_adjust (float) – difference after component scale is taken in to account.

on_walking_off_ledge(previous_floor_impact_normal, previous_floor_contact_normal, previous_location, time_delta)None

Event fired when the Character is walking off a surface and is about to fall because CharacterMovement->CurrentFloor became unwalkable. If CharacterMovement->MovementMode does not change during this event then the character will automatically start falling afterwards. note: Z velocity is zero during walking movement, and will be here as well. Another velocity can be computed here if desired and will be used when starting to fall.

Parameters
  • previous_floor_impact_normal (Vector) – Normal of the previous walkable floor.

  • previous_floor_contact_normal (Vector) – Normal of the contact with the previous walkable floor.

  • previous_location (Vector) – Previous character location before movement off the ledge.

  • time_delta (float) –

play_anim_montage(anim_montage, play_rate=1.0, start_section_name='None')float

Play Animation Montage on the character mesh. Returns the length of the animation montage in seconds, or 0.f if failed to play. *

Parameters
Returns

Return type

float

property pressed_jump

[Read-Only] When true, player wants to jump

Type

(bool)

property proxy_jump_force_started_time

[Read-Only] Track last time a jump force started for a proxy.

Type

(float)

stop_anim_montage(anim_montage=None)None

Stop Animation Montage. If nullptr, it will stop what’s currently active. The Blend Out Time is taken from the montage asset that is being stopped. *

Parameters

anim_montage (AnimMontage) –

stop_jumping()None

Stop the character from jumping on the next update. Call this from an input event (such as a button ‘up’ event) to cease applying jump Z-velocity. If this is not called, then jump z-velocity will be applied until JumpMaxHoldTime is reached.

un_crouch(client_simulation=False)None

Request the character to stop crouching. The request is processed on the next update of the CharacterMovementComponent. see: OnEndCrouch see: IsCrouched see: CharacterMovement->WantsToCrouch

Parameters

client_simulation (bool) –

update_custom_movement(delta_time)None

Event for implementing custom character movement mode. Called by CharacterMovement if MovementMode is set to Custom. note: C++ code should override UCharacterMovementComponent::PhysCustom() instead. see: UCharacterMovementComponent::PhysCustom()

Parameters

delta_time (float) –

property was_jumping

[Read-Only] Tracks whether or not the character was already jumping last frame.

Type

(bool)