sqlite3_open

Navigation

API > API/Plugins > API/Plugins/SQLiteCore > API/Plugins/SQLiteCore/sqlite

References

int sqlite3_open  
(  
    const char * filename,  
    sqlite3 ** ppDb  
)  
Copy full snippet

int sqlite3_open (     const char * filename,     sqlite3 ** ppDb )

Remarks

CAPI3REF: Opening A New Database Connection CONSTRUCTOR: sqlite3

^These routines open an SQLite database file as specified by the filename argument. ^The filename argument is interpreted as UTF-8 for sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte order for sqlite3_open16(). ^(A [database connection] handle is usually returned in *ppDb, even if an error occurs. The only exception is that if SQLite is unable to allocate memory to hold the [sqlite3] object, a NULL will be written into *ppDb instead of a pointer to the [sqlite3] object.)^ ^(If the database is opened (and/or created) successfully, then [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain an English language description of the error following a failure of any of the sqlite3_open() routines.

^The default encoding will be UTF-8 for databases created using sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases created using sqlite3_open16() will be UTF-16 in the native byte order.

Whether or not an error occurs when it is opened, resources associated with the [database connection] handle should be released by passing it to [sqlite3_close()] when it is no longer required.

The sqlite3_open_v2() interface works like sqlite3_open() except that it accepts two additional parameters for additional control over the new database connection. ^(The flags parameter to sqlite3_open_v2() must include, at a minimum, one of the following three flag combinations:)^

([SQLITE_OPEN_READONLY] The database is opened in read-only mode. If the database does not already exist, an error is returned.)^

^([SQLITE_OPEN_READWRITE] The database is opened for reading and writing if possible, or reading only if the file is write protected by the operating system. In either case the database must already exist, otherwise an error is returned.)^

^([SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE] The database is opened for reading and writing, and is created if it does not already exist. This is the behavior that is always used for sqlite3_open() and sqlite3_open16().)^

In addition to the required flags, the following optional flags are also supported:

([SQLITE_OPEN_URI] The filename can be interpreted as a URI if this flag is set.)^

^([SQLITE_OPEN_MEMORY] The database will be opened as an in-memory database. The database is named by the "filename" argument for the purposes of cache-sharing, if shared cache mode is enabled, but the "filename" is otherwise ignored. )^

^([SQLITE_OPEN_NOMUTEX] The new database connection will use the "multi-thread" [threading mode].)^ This means that separate threads are allowed to use SQLite at the same time, as long as each thread is using a different [database connection].

^([SQLITE_OPEN_FULLMUTEX] The new database connection will use the "serialized" [threading mode].)^ This means the multiple threads can safely attempt to use the same database connection at the same time. (Mutexes will block any actual concurrency, but in this mode there is no harm in trying.)

^([SQLITE_OPEN_SHAREDCACHE] The database is opened [shared cache] enabled, overriding the default shared cache setting provided by [sqlite3_enable_shared_cache()].)^

^([SQLITE_OPEN_PRIVATECACHE] The database is opened [shared cache] disabled, overriding the default shared cache setting provided by [sqlite3_enable_shared_cache()].)^

[[OPEN_NOFOLLOW]] ^([SQLITE_OPEN_NOFOLLOW] The database filename is not allowed to be a symbolic link

)^

If the 3rd parameter to [sqlite3open_v2()](API\Plugins\SQLiteCore\sqlite\sqlite3_open_v2) is not one of the required combinations shown above optionally combined with other [SQLITE_OPEN_READONLY | SQLITE_OPEN* bits] then the behavior is undefined.

^The fourth parameter to sqlite3_open_v2() is the name of the [sqlite3_vfs] object that defines the operating system interface that the new database connection should use. ^If the fourth parameter is a NULL pointer then the default [sqlite3_vfs] object is used.

^If the filename is ":memory:", then a private, temporary in-memory database is created for the connection. ^This in-memory database will vanish when the database connection is closed. Future versions of SQLite might make use of additional special filenames that begin with the ":" character. It is recommended that when a database filename actually does begin with a ":" character you should prefix the filename with a pathname such as "./" to avoid ambiguity.

^If the filename is an empty string, then a private, temporary on-disk database will be created. ^This private database will be automatically deleted as soon as the database connection is closed.

[[URI filenames in sqlite3_open()]] URI Filenames

^If [URI filename] interpretation is enabled, and the filename argument begins with "file:", then the filename is interpreted as a URI. ^URI filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is set in the third argument to sqlite3_open_v2(), or if it has been enabled globally using the [SQLITE_CONFIG_URI] option with the [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option. URI filename interpretation is turned off by default, but future releases of SQLite might enable URI filename interpretation by default. See "[URI filenames]" for additional information.

URI filenames are parsed according to RFC 3986. ^If the URI contains an authority, then it must be either an empty string or the string "localhost". ^If the authority is not an empty string or "localhost", an error is returned to the caller. ^The fragment component of a URI, if present, is ignored.

^SQLite uses the path component of the URI as the name of the disk file which contains the database. ^If the path begins with a '/' character, then it is interpreted as an absolute path. ^If the path does not begin with a '/' (meaning that the authority section is omitted from the URI) then the path is interpreted as a relative path. ^(On windows, the first component of an absolute path is a drive specification (e.g. "C:").)^

[[core URI query parameters]] The query component of a URI may contain parameters that are interpreted either by SQLite itself, or by a [VFS | custom VFS implementation]. SQLite and its built-in [VFSes] interpret the following query parameters:

• vfs: ^The "vfs" parameter may be used to specify the name of a VFS object that provides the operating system interface that should be used to access the database file on disk. ^If this option is set to an empty string the default VFS object is used. ^Specifying an unknown VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is present, then the VFS specified by the option takes precedence over the value passed as the fourth parameter to sqlite3_open_v2().

• mode: ^(The mode parameter may be set to either "ro", "rw", "rwc", or "memory". Attempting to set it to any other value is an error)^. ^If "ro" is specified, then the database is opened for read-only access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the third argument to sqlite3_open_v2(). ^If the mode option is set to "rw", then the database is opened for read-write (but not create) access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had been set. ^Value "rwc" is equivalent to setting both SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is set to "memory" then a pure [in-memory database] that never reads or writes from disk is used. ^It is an error to specify a value for the mode parameter that is less restrictive than that specified by the flags passed in the third parameter to sqlite3_open_v2().

• cache: ^The cache parameter may be set to either "shared" or "private". ^Setting it to "shared" is equivalent to setting the SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to sqlite3_open_v2(). ^Setting the cache parameter to "private" is equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit. ^If sqlite3_open_v2() is used and the "cache" parameter is present in a URI filename, its value overrides any behavior requested by setting SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.

• psow: ^The psow parameter indicates whether or not the [powersafe overwrite] property does or does not apply to the storage media on which the database file resides.

• nolock: ^The nolock parameter is a boolean query parameter which if set disables file locking in rollback journal modes. This is useful for accessing a database on a filesystem that does not support locking. Caution: Database corruption might result if two or more processes write to the same database and any one of those processes uses nolock=1.

• immutable: ^The immutable parameter is a boolean query parameter that indicates that the database file is stored on read-only media. ^When immutable is set, SQLite assumes that the database file cannot be changed, even by a process with higher privilege, and so the database is opened read-only and all locking and change detection is disabled. Caution: Setting the immutable property on a database file that does in fact change can result in incorrect query results and/or [SQLITE_CORRUPT] errors. See also: [SQLITE_IOCAP_IMMUTABLE].

^Specifying an unknown parameter in the query component of a URI is not an error. Future versions of SQLite might understand additional query parameters. See "[query parameters with special meaning to SQLite]" for additional information.

[[URI filename examples]] URI filename examples

URI filenames

Results

file:data.db

Open the file "data.db" in the current directory.

file:/home/fred/data.dbfile:///home/fred/data.dbfile://localhost/home/fred/data.db

Open the database file "/home/fred/data.db".

file://darkstar/home/fred/data.db

An error. "darkstar" is not a recognized authority.

file:///C:/Documents%20and%20Settings/fred/Desktop/data.db

Windows only: Open the file "data.db" on fred's desktop on drive C:. Note that the %20 escaping in this example is not strictly necessary - space characters can be used literally in URI filenames.

file:data.db?mode=ro&cache=private

Open file "data.db" in the current directory for read-only access. Regardless of whether or not shared-cache mode is enabled by default, use a private cache.

file:/home/fred/data.db?vfs=unix-dotfile

Open file "/home/fred/data.db". Use the special VFS "unix-dotfile" that uses dot-files in place of posix advisory locking.

file:data.db?mode=readonly

An error. "readonly" is not a valid option for the "mode" parameter.

^URI hexadecimal escape sequences (HH) are supported within the path and query components of a URI. A hexadecimal escape sequence consists of a percent sign - "%" - followed by exactly two hexadecimal digits specifying an octet value. ^Before the path or query components of a URI filename are interpreted, they are encoded using UTF-8 and all hexadecimal escape sequences replaced by a single byte containing the corresponding octet. If this process generates an invalid UTF-8 encoding, the results are undefined.

Note to Windows users: The encoding used for the filename argument of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever codepage is currently defined. Filenames containing international characters must be converted to UTF-8 prior to passing them into sqlite3_open() or sqlite3_open_v2().

Note to Windows Runtime users: The temporary directory must be set prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various features that require the use of temporary files may fail.

See also: [sqlite3_temp_directory]