Verse API reference page for the sphere_light_component class | Fortnite Documentation

This page is not available in the language you have chosen. It will be displayed in English by default. If you would like to view it in a different language, you can try selecting another language.

A sphere_light_component emits light in all directions into the scene from a spherical source shape with a specified radius. A radius of 0 makes it a point light. You can use these to simulate any kind of light sources that emit in all directions, such as a light bulb.


Verse `using` statement	`using { /Verse.org/SceneGraph }`

Inheritance Hierarchy

This class is derived from the following hierarchy, starting with component:

Name Description

Name	Description
`component`	Base class for authoring logic and data in the SceneGraph. Using components you can author re-usable building blocks of logic and data which can then be added to entities in the scene. Components are a very low level building block which can be used in many ways. For example: Exposing engine level concepts like mesh or sound Adding gameplay capabilities like damage or interaction Storing an inventory for a character in the game As components are generic there is no specific way that they must be used. It is up to the needs of your experience if you use one big game component or if you break up logic into many small components. Classes deriving from component must also specify `<final_super>` to be added to entities. This ensures the class will always derive directly from `component`. Further subclassing of the initial derived component is allowed and does not require specifying `<final_super>` on the derived classes. Only one instance of a component from each subclass group can be added to an entity at a time. For example, given this group of components, only one light_component can exist on a single entity. To create multiple lights you should use multiple entities. light_component := class(component){} capsule_light_component := class(light_component){} directional_light_component := class(light_component){} spot_light_component := class(light_component){} sphere_light_component := class(light_component){} rect_light_component := class(light_component){} ============================================================================== Component Lifetime Components move through a series of lifetime functions as they are added to entities, added to the scene, and begin running in the simulation. Components should override these methods to perform setup and run their simulation. As a component shuts down it will then move through shutdown version of these functions, giving users the opportunity to clean up any retained state on the component before it is disposed . Lifetime Methods: OnAddedToScene OnBeginSimulation -> OnSimulate OnEndSimulation OnRemovingFromScene ==============================================================================
`light_component`	Base class for light components in the SceneGraph. Dependencies: `transform_component` on the entity positions the light. Examples of components implementing `light_component`: `directional_light_component` `capsule_light_component` `sphere_light_component` `rect_light_component` `spot_light_component`

component

Base class for authoring logic and data in the SceneGraph. Using components you can author re-usable building blocks of logic and data which can then be added to entities in the scene.

Components are a very low level building block which can be used in many ways. For example:

Exposing engine level concepts like mesh or sound
Adding gameplay capabilities like damage or interaction
Storing an inventory for a character in the game

As components are generic there is no specific way that they must be used. It is up to the needs of your experience if you use one big game component or if you break up logic into many small components.

Classes deriving from component must also specify <final_super> to be added to entities. This ensures the class will always derive directly from component. Further subclassing of the initial derived component is allowed and does not require specifying <final_super> on the derived classes.

Only one instance of a component from each subclass group can be added to an entity at a time. For example, given this group of components, only one light_component can exist on a single entity. To create multiple lights you should use multiple entities.

light_component := class(component){} capsule_light_component := class(light_component){} directional_light_component := class(light_component){} spot_light_component := class(light_component){} sphere_light_component := class(light_component){} rect_light_component := class(light_component){}

============================================================================== Component Lifetime

Components move through a series of lifetime functions as they are added to entities, added to the scene, and begin running in the simulation. Components should override these methods to perform setup and run their simulation.

As a component shuts down it will then move through shutdown version of these functions, giving users the opportunity to clean up any retained state on the component before it is disposed . Lifetime Methods: OnAddedToScene OnBeginSimulation -> OnSimulate OnEndSimulation OnRemovingFromScene ==============================================================================

light_component

Base class for light components in the SceneGraph.

Dependencies:

transform_component on the entity positions the light.

Examples of components implementing light_component:

directional_light_component
capsule_light_component
sphere_light_component
rect_light_component
spot_light_component

Members

This class has both data members and functions.

Data

Data Member Name	Type	Description
`AttenuationRadius`	`??float`	The bounds of the light's visible influence, in centimeters. This clamping of the light's influence is not physically correct but very important for performance, larger lights cost more. The light falloff is based on Inverse Square law. Towards the tail end of the AttenuationRadius, there is an additional smoothing factor to fade out the light contribution to 0 to avoid a hard cutoff.
`CastShadows`	`?logic`	Whether the light should cast any shadows.
`ColorFilter`	`?color`	Set the filter color of the light. This acts as a colored filter in front of the light source. Note that this can change the light's effective intensity. In normalized range 0-1.
`DiffuseScale`	`?float`	Multiplier on diffuse lighting. Any value besides 1.0 is not physical. 0.0 means no diffuse contribution from this light.
`Entity`	`entity`	The parent entity of this component. Components must have a parent entity pointer provided when being constructed. Components cannot be moved between parents.
`Intensity`	`?float`	Set the visible light intensity emitted in SI unit Candela. Specified before ColorFilter (which multiplies each color component after the intensity calculation and can change the effective intensity of the light).
`SourceRadius`	`?float`	Radius of the source shape, in centimeters. Note that light shapes which intersect shadow casting geometry can cause shadowing artifacts.
`SpecularScale`	`?float`	Multiplier on specular highlights. Can be used to artistically remove highlights mimicking polarizing filters or photo touch up. Any value besides 1.0 is not physical. 0.0 means no specular contribution from this light.
`TickEvents`	`?tick_events`	Set callbacks to `TickEvents.PrePhysics` and `TickEvents.PostPhysics` to receive per-frame updates before and after physics is updated on your object.

Functions

Function Name	Description
`Disable`	Disables rendering of this light.
`Enable`	Enables rendering of this light.
`IsEnabled`	Succeeds if the component is enabled, fails if it's disabled.
`IsInScene`	Succeeds if the component is currently in the scene. After `OnAddedToScene` is called this call succeeds. After `OnRemovingFromScene` is called this call fails.
`IsSimulating`	Succeeds if the component is currently simulating. After `OnBeginSimulation` is called this call succeeds. After `OnEndSimulation` is called this call fails.
`OnAddedToScene`	Called when the component is added to the scene by parenting it under the simulation entity or another entity already in the scene. Querying for components in the scene is valid after this phase completes.
`OnBeginSimulation`	Called when the component begins simulating within the scene. Use this to set up TickEvent callbacks or other setup that must be guaranteed to complete immediately. `OnAddedToScene` is guaranteed to run before `OnBeginSimulation`.
`OnEndSimulation`	Called when the component ends simulation within the scene. Simulation ends on a component when the experience resets, the parent entity is removed from the scene. Cached TickEvents cancelables should be canceled in `OnEndSimulation`. `OnSimulate` task will be canceled before `OnEndSimulation` is called. `OnEndSimulation` is only called on components that have already had `OnBeginSimulation` called.
`OnRemovingFromScene`	Called when the component is about to be removed from the scene. Components are removed from a scene when the parent entity is removed from the scene. `OnRemovingFromScene` is only called on components that have already had `OnAddedToScene` called.
`OnSimulate`	Called when the component begins simulating within the scene. Use this to add asynchronous/suspends update logic for a component. `OnBeginSimulation` is guaranteed to run before `OnSimulate`. `OnSimulate` will be cancelled before `OnEndSimulation`
`RemoveFromEntity`	Removes the component from the entity. Removed components are removed from the scene and can only be added back to the same entity. Flows through `OnEndSimulation`-> `OnRemovingFromScene`.
`SendDown`	Send a scene event to this component. Return true to consume the event and halt propogation.

Can't find any content

Inheritance Hierarchy

Members

Data

Functions