Notes de la version 5.7 de l'Unreal Engine

Nouveautés

À l'occasion de la version 5.7, de nouvelles améliorations ont été apportées à la trousse à outils de l'UE5. Cette version apporte des améliorations dans des domaines très variés, comme le rendu, les personnages et l'animation, la conception de monde et la PCG.

Cette version comprend des améliorations suggérées par la communauté des développeurs de l'Unreal Engine sur GitHub. Merci à toutes les personnes qui ont contribué à l'amélioration de l'Unreal Engine 5.7 :

AlexanderVeselov-arm, AlexBlackfrost, Almax27, andreibazi, az6667, Bit-Rot, Brian-PD, brpendle-ti, bturner, chrysos8201, ckendal3, ColinGulliver, CookiePLMonster, Darcy3000s, dasherman-ea, davidbaack, dmergele, DoubleDeez, DrewWeth, DTG-Will-Marshall, dyanikoglu, erebel55, Eric2-Praxinos, Erlandys, faisa-believer, foobit, gamethread, geordiemhall, glecko, GreenLightning, guansdu, H3mul, IngSubstance, iniside, jamesfAnet, jamespark-unreal, JasonCoombs, jdamdami, jerobarraco, jeysym, Jiboo, JohnJFarrow, Jordonbc, jorge-axiomvfx, jorgenpt, jpritchard1010, KaosSpectrum, KarimLUCCIN, KeithRare, kimkun07-k, kissSimple, klukule, KXOC, laurencei, lclara-BARB, LHG-JonAnderJimenez, ligazetom, LightKL, lsandersljungberg, LucaFranzo98, Maigo, MarcusSvensson92, Mario-Azcona, MartinWickhamFB, Mattiwatti, melku, michael-buschbeck-ms, Minus4-44, moumee, nickdarnell, phochstrasser, PICO-XR, QRare, r457-Ao2, rdunnington, reduf, redxdev, RiotJDebern, rohyunsang, sareali, serhanio, SilverWinter0511, slonopotamus, SoulSharer, sportbikerr1, ssutherland-riot, SukenderDontNod, Sythenz, teddemunnik, tioez326, tokyocplusplus, Tt-Wes, tustanivsky, Vaei, vladbelousoff, vogoltsov, WangKan, Wizzard033, wmiller, x157, yangskyboxlabs, yoonbigbear, zachlute-arenanet, ZeroEightSix, ZeroErrors, zhou-

Rendu

MegaLights (Bêta)

MegaLights est désormais en version Bêta, avec des améliorations au niveau de la réduction du bruit et des performances générales. Les fonctionnalités suivantes sont maintenant également prises en charge :

• Éclairage directionnel

• Lumières de particules Niagara

• Translucidité

• Mèches de cheveux

Volumes hétérogènes Niagara

Les volumes hétérogènes sont maintenant en Bêta. Cette mise à jour se concentre sur l'amélioration de la projection des ombres, grâce aux nouvelles fonctionnalités suivantes :

• Ombres en cascade pour l'éclairage directionnel.

• Prise en charge de Beer Shadow Map pour l'évolutivité, qui offre les avantages suivants :

  • Amélioration considérable du temps de création des ombres.

  • Requête d'ombre à temps constant.

• Prépassage du masque d'ombres, qui supprime la pression VGPR ajoutée dans l'éclairage différé.

• Activer la projection d'ombres ne nécessite plus de redémarrer l'éditeur ni de compiler les shaders.

Substrate

Les matériaux Substrate, qui sont prêts pour la production et activés par défaut à partir de l'UE 5.7, représentent un cadre de travail de matériaux modulaire et réactifs à la physique qui remplace les modèles d'ombrage fixes par un système conçu pour un contrôle expressif, des performances évolutives et une flexibilité à long terme.

Deux chemins de rendus sont pris en charge : 

• Le tampon graphique adaptatif (Adaptive GBuffer), qui permet d'activer des fonctionnalités avancées, comme la topologie par pixel et les fermetures en couche sur le matériel moderne.

• Le tampon graphique fusionnable (Blendable GBuffer), une solution de repli simplifiée qui assure une large compatibilité avec les différentes plateformes.

Végétation et surfaçage Nanite (expérimental)

La végétation Nanite est un chemin de rendu révolutionnaire, qui se compose essentiellement de trois systèmes intégraux :

• Les assemblages Nanite, qui gèrent les instances de la partie végétation en une seule unité cohérente.

• Le surfaçage Nanite, qui détermine le comportement dynamique avec des systèmes comme le vent.

• Les voxels Nanite, qui sont des voxels de la taille d'un pixel capables de conserver les détails, l'animation et les caractéristiques des matériaux en fonction de la distance de la caméra, le tout pour une fraction du coût d'origine.

La combinaison de ces éléments permet d'imaginer des mondes plus robustes avec une végétation animée et réaliste qui peut être produite avec un budget de 60 IPS sur le matériel de la génération actuelle.

Nouvelles fonctionnalités :

• Assemblages Nanite, pour la création de ressources de végétation utilisant des pièces instanciées afin de conserver des tailles de ressources réduites.

  • API Blueprint pour la création d'assemblages Nanite.

  • Et des outils intégrés à l'éditeur pour faciliter la création d'assemblages Nanite à partir de sélections.

  • Prise en charge de l'importateur pour USD. Schémas USD exposés à utiliser dans les outils CCN pour marquer les scènes à importer en tant qu'assemblages.

• Vent dynamique piloté par maillage squelettique : les arbres sont des maillages squelettiques et le nouveau plug-in Dynamic Wind permet au vent procédural d'affecter leurs os.

• Les voxels de Nanite, pour rendre efficacement la géométrie de la végétation au loin.

• Détection de la géométrie fine TSR pour mieux gérer la végétation.

SMAA (expérimental)

Les outils de rendu mobiles et de bureau prennent désormais en charge l'anticrénelage morphologique des sous-pixels (SMAA). Vous pouvez l'activer avec l'outil de rendu mobile en utilisant la CVar r.Mobile.AntiAliasing=5, et avec l'outil de rendu bureau en utilisant la CVar  r.AntiAliasingMethod=5.

Cette fonctionnalité améliore le réalisme visuel en fournissant un lissage des arêtes de grande qualité avec un impact minimal sur les performances, technique efficace pour les jeux mobiles.

• L'anticrénelage SMAA est activé sur toutes les plateformes.

• Réglez les paramètres de qualité avec r.SMAA.Quality

• Ajustez la détection des arêtes entre couleur ou luminance avec r.SMAA.EdgeMode

• Améliorez le lissage des arêtes sans coût élevé pour le processeur graphique.

Il s'agit actuellement d'une fonctionnalité expérimentale. Les paramètres de qualité permettent de faire des compromis entre performances et réalisme visuel.

Personnages et animation

Intégration du sélecteur de correspondance des mouvements (expérimental)

Avec l'UE 5.7, nous avons apporté notre première itération de correspondance des mouvements intégrée dans les sélecteurs ! Cela permet aux utilisateurs de contrôler quelles ressources sont valables pour la sélection dans la correspondance des mouvements, ce qui, dans les versions précédentes, n'était possible qu'au niveau de la base de données, et non au niveau des ressources individuelles.

Vous pouvez donc rechercher la meilleure pose, mais aussi filtrer les résultats par ressource en fonction de conditions supplémentaires, comme la logique du jeu, grâce au sélecteur.

Un nouveau champ Pose Search dans les sélecteurs permet de gérer cette complexité, ainsi que le débogage intégré de la correspondance des mouvements dans les sélecteurs.

Cette fonctionnalité est expérimentale.

Blendshapes et outils de sculpture

Apportez à l'Unreal Engine la flexibilité des flux de travail de sculpture standard du secteur. Il s'agit d'une mise à jour des outils de l'éditeur de squelette qui permet désormais de créer et de modifier harmonieusement des formes de morphose, des os et des pondérations de surfaçage.

• Passez instantanément du placement d'os à la peinture de poids et à la sculpture de blendshapes sur un maillage squelettique.

• Nouvelle visionneuse de cible de morphose.

• Les formes s'adaptent aux changements dans la topologie du maillage.

• Dotez les animateurs d'outils d'expression pour des performances de qualité studio.

Collisions dans le monde pour la physique des squelettes de contrôle

Introduisez les collisions de niveau dans vos simulations physiques de squelette de contrôle. Utilisez la géométrie et les corps physiques du monde existant pour créer des contacts, des poussées et des interactions crédibles.

• Les collisions dans le monde prennent en charge la physique de squelette de contrôle avec des interactions à sens unique.

• Utilisez les maillages de niveau et les corps physiques comme collisionneurs.

• Créez un contact avec les accessoires, les sols et l'environnement pendant la simulation et la lecture.

Vue des dépendances du squelette de contrôle

Comprenez comment les éléments de squelettage se connectent et s'actualisent au fil du temps grâce à une vue des dépendances dédiée. Visualisez les relations entre les contrôles, les os et les modules pour simplifier le débogage.

• Explorez les relations parent-enfant et avec les métadonnées en un coup d'œil.

• Déboguez les squelettes et les modules en bénéficiant d'une meilleure visibilité des flux de données.

• Visualisation familière de la structure des dépendances.

Performances du Full Body IK et du reciblage

Nous avons ajouté des améliorations de performances et de contrôle dans Full Body IK et le recibleur CI. Cela vous permet d'obtenir un reciblage performant à l'exécution.

• Amélioration de la pose avec FBIK sans coût important de performances (~20 % d'augmentation de la vitesse).

• Utilisez le solveur d'étirement des membres du système CI pour des reciblages performants à l'exécution.

• Utilisez la Copie locale du mode de rotation CD pour un transfert de rotation plus rapide par chaîne.

• Activez le profilage des performances sur la pile reciblée.

• Ajoutez un seuil de LOD par opérateur de reciblage.

Meilleur contact des pieds et reciblage proportionné

Nous avons amélioré le recibleur CI pour une meilleure gestion des contacts au sol et des personnages à grandes proportions.

Cela permet un meilleur transfert de l'animation pour une grande variété de personnages et un gain de temps de direction artistique. Vous pouvez maintenant effectuer toutes les opérations suivantes :

• Définir la hauteur de l'entrejambe pour éviter que le bassin s'écrase au sol, et maintenir le mouvement vertical.

• Ajouter la contrainte au sol aux pieds pour maintenir la verticalité à proximité du sol.

• Utiliser le mode de translation CD Orienter et changer d'échelle pour transférer les données de translation des os.

• Ajoutez l'opérateur Étirer la chaîne pour faire correspondre la chaîne de reciblage source ou modifier son échelle.

• Utilisez le solveur Étirer le membre pour contrôler la courbure et l'étirement des membres.

• Changez le pivot de l'échelle source en autre os pour la capture de mouvement ou le gameplay.

• Ajoutez l'opérateur Filtrer les os pour supprimer les bruits de haute fréquence tout en reciblant sur les personnages plus grands.

Reciblage tenant compte de l'espace (expérimental)

Le reciblage tenant compte de l'espace permet aux graphistes de transférer des animations entre différents personnages sans avoir à se soucier des collisions.

Il est donc moins nécessaire de nettoyer l'animation après un reciblage.

• Nous avons ajouté un opérateur Interactions avec le corps pour envoyer des objectifs CI en utilisant la physique afin d'éviter les autocollisions.

• Nous avons ajouté un opérateur relatif à la CI pour déplacer les objectifs de CI par rapport aux longueurs de contact entre la source et la cible.

Validateur de séquence (expérimental)

Le validateur de séquence permet aux graphistes de cinématiques de vérifier si leurs séquences contiennent des erreurs de contenu. Cela réduit le nombre de problèmes potentiels qui peuvent survenir au cours d'une production lorsque vous travaillez dans Sequencer.

En l'utilisant, vous pouvez :

• Mettre en file d'attente plusieurs séquences et leurs hiérarchies de séquences pour détecter d'éventuels problèmes.

• Vérifier si des sections d'une séquence sont hors de la plage de coupe de caméra ou de plage de lecture.

• Vérifier s'il existe des ressources ou des liaisons non attribuées sur les sections.

• Vérifier si les sections commencent et/ou se terminent sur des images entières.

• Examiner les résultats et accéder directement à l'endroit où se trouve le problème à chaque séquence.

Courbe d'accélération (Bêta) et améliorations de l'expérience utilisateur

Vous pouvez désormais utiliser l'outil Courbe d'accélération à partir de Motion Design dans Sequencer. Vous pouvez l'activer à l'aide du plug-in Ease Curve

Cette mise à jour entraîne également des comportements plus cohérents pour une meilleure facilité d'utilisation afin que vous puissiez itérer plus rapidement.

• Utilisez l'outil Courbe d'accélération pour appliquer et enregistrer différents préréglages de courbe d'assouplissement dans Sequencer, l'éditeur de courbes et UMG.

• Ajustez l'échelle de la même manière que dans le panneau Détails de l'arborescence de Sequencer en utilisant le verrouillage d'échelle.

• Amélioration de l'affichage de la chronologie des hiérarchies de séquences afin d'afficher à la fois la durée de la séquence actuelle et celle de la séquence parente.

• Extension des fonctionnalités Blueprint et Python pour l'accès aux états des pistes (Solo, Muet, Désactiver, Verrouiller et Épingler).

• Amélioration du précalcul des transformations de manière à inclure la distorsion temporelle.

• Ajout de nouvelles colonnes Identifiant de liaison et Identifiant de séquence à l'outil de navigation.

L'outil Courbe d'accélération est actuellement en Bêta.

Mutable sans données (expérimental)

Accélérez l'itération et rationalisez votre flux de travail grâce aux objets personnalisables sans données. Les entrées de paramètres sont traitées à l'exécution et non au moment de la compilation, vous permettant d'accélérer la compilation, d'améliorer le chiffrement et de réduire la taille des paquets.

• Convertissez n'importe quel objet personnalisable en objet sans données.

• Profitez de temps de compilation plus courts grâce à la gestion des paramètres à l'exécution.

• Utilisez le chiffrement et l'empaquetage comme n'importe quelle autre ressource de l'UE.

Ensembles de sélection

Les animateurs ont besoin d'un accès rapide à plusieurs sélections tout au long de leur processus de travail. Il peut s'agir de plusieurs contrôles au sein d'un même squelette, mais aussi de plusieurs contrôles et/ou transformations au sein de diverses ressources. Les animateurs s'appuient actuellement sur des outils personnalisés comme les sélecteurs d'interface utilisateur pour y parvenir, nous avons donc voulu créer une version plus native, semblable aux plug-ins populaires d'autres outils.

Expérience utilisateur et QOL du mode d'animation

Nous avons apporté des améliorations au mode Animation.

Nos outils Contraintes, Changement d'espace et Fixateur sont désormais regroupés dans une nouvelle fenêtre Contrainte.

Toujours dans le domaine des contraintes, nous avons ajouté quelques nouvelles options au processus de création.

• Image actuelle : il s'agit de la fonctionnalité standard précédente. Elle crée une clé d'activation à l'image actuelle et compense toutes les clés qui suivent.

• À partir du début (nouveau) : prend le décalage de l'image en cours et le pointe sur la première image de votre plan au lieu de l'image en cours.

• Infini (nouveau) : n'ajoute pas de clés. Au lieu de cela, le décalage de l'image actuelle est appliqué à l'ensemble de la séquence.

La bibliothèque de poses, les outils d'interpolation, les contraintes, les ensembles de sélection (nouveau) et les couches d'animation font désormais basculer les fenêtres correspondantes en fonction de l'état de leur icône. Leur position et leur taille dans la disposition sont également enregistrées.

Vous pouvez affecter le basculement de ces fenêtres à des touches de raccourci.

MetaHuman

MetaHuman Creator

MetaHuman Creator dans l'Unreal Engine est désormais disponible sur Linux et macOS, pour vous permettre de créer des humains numériques intégrés et convaincants sur votre plateforme préférée. Si vous ne l'avez pas déjà fait, opérez la migration depuis l'application internet MetaHuman Creator en suivant notre guide de migration pour savoir comment importer votre personnage MetaHuman dans l'Unreal Engine et poursuivre sa création.

Nous avons amélioré le processus d'adaptation de maillage de corps en lui faisant prendre en charge diverses poses, et avons mis en place une correspondance de vertex UV-espace entre le modèle d'adaptation et les exemples de maillages, ce qui permet d'obtenir de meilleurs résultats tout en économisant les efforts. Les commandes de corps paramétriques sont également plus intuitives, permettant de respecter plus facilement les proportions humaines grâce à une précision et un contrôle accrus. 

Dans cette version, vous allez pouvoir automatiser et traiter par lots pratiquement toutes les opérations de modification et d'assemblage des ressources de personnage MetaHuman avec Python ou Blueprints. Pour la première fois, intégrez de manière plus profonde MetaHuman Creator à votre pipeline et à votre flux de travail créatif grâce à une API qui prend en charge la sculpture, l'adaptation, les garde-robes, le squelettage et les textures, et qui rationalise l'assemblage des personnages.  Prévisualisez les modifications en temps réel dans MetaHuman Creator, puis exécutez-les interactivement dans l'Unreal Editor ou une ferme de calcul pour leur traitement hors ligne.

MetaHumans dans l'Unreal Engine

Le plug-in Unreal Engine Groom permet maintenant un meilleur contrôle du façonnage et de l'animation des mèches de cheveux grâce à un flux de travail basé sur des articulations. Vous pouvez maintenant fusionner les simulations grâce aux mouvements à direction artistique, utiliser pleinement les flux de travail d'animation de maillage squelettique et bénéficier d'une plus grande liberté grâce aux ensembles de sélection améliorés et aux outils de peinture. La trousse à outils offre une compatibilité totale avec les pilosités MetaHuman créées dans Houdini.

MetaHuman Animator

Vous pouvez dorénavant accéder à l'animation en temps réel à partir des sources MetaHuman Live Link via une interface Blueprint, avec un exemple de graphique fourni dans notre documentation.

Le flux de travail de génération de données d'étalonnage depuis la prise en damier (capturée à l'aide de deux caméras stéréo) permet désormais une meilleure sélection et une meilleure visualisation automatique d'images pour faciliter la sélection manuelle d'images et les configurations répétables sur plusieurs prises.

Il est associé au nouveau plug-in MetaHuman Animator Calibration Diagnostics (expérimental) pour valider l'étalonnage par rapport à la séquence de performance et déterminer plus facilement s'il s'agit du meilleur étalonnage.

MetaHuman Capture

Nous avons amélioré les options d'animation en temps réel dans les applications Live Link Face sur iOS et Android en développant la gamme de caméras prises en charge.

Avec Live Link Face, vous pouvez maintenant générer une animation faciale en temps réel à l'aide d'une caméra externe sur les périphériques Android pris en charge ou les iPads (attention : l'iOS d'Apple ne prend pas en charge les caméras externes pour le moment).  Les vidéos sont enregistrables à partir d'une caméra externe uniquement sur iPad.

Vous pouvez également générer une animation en temps réel par sélection depuis n'importe quelle caméra sur périphérique utilisant Live Link Face sur iOS et Android.  Les vidéos sont enregistrables à partir de la caméra de périphérique uniquement sur iPad.

MetaHuman for Houdini

La dernière mise à jour du plug-in MetaHuman for Houdini contient des outils de pilosité paramétriques et un flux de travail avec guide pour créer des coiffures à l'aide de données précréées. La trousse à outils inclut un générateur de follicules pour gérer la densité et le positionnement de la naissance des cheveux à l'aide de guides basés sur des paramètres de flux, de longueur et de volume, ainsi que l'interpolation et la stylisation des mèches de cheveux pour l'établissement de détails avancés, comme les touffes de cheveux.  Il s'agit d'une méthode rapide et simple pour établir et itérer de nouvelles coiffures.  

Ceux qui souhaitent apprendre à créer des coiffures plus complexes ne seront pas en reste, avec la publication du nouveau MetaHuman Groom Advanced Kit pour Houdini sur Fab.

Le plug-in MetaHuman for Houdini est désormais disponible pour Linux.  

MetaHuman for Maya

La dernière mise à jour du plug-in MetaHuman for Maya, qui met en place la prise en charge de Maya 2026, est disponible sur Linux.

Conception de monde

HLOD personnalisés

Si vous utilisez les méthodes de génération automatique de HLOD fournies, le résultat ne répond pas toujours aux exigences du projet et est lié à des composants de maillage.

La prise en charge des HLOD personnalisés répond à cette limitation en vous permettant de fournir vos propres représentations de HLOD personnalisées pour des acteurs ou des groupes d'acteurs distincts.

Vous pouvez utiliser la nouvelle classe d'acteurs à HLOD personnalisé World Partition de deux manières :

• En injectant directement une représentation personnalisée : vous pouvez injecter la représentation personnalisée telle quelle dans la partition d'exécution des HLOD et, éventuellement, l'utiliser comme entrée pour les couches de HLOD parentes.

• En fournissant uniquement une source personnalisée : vous pouvez utiliser la représentation personnalisée en tant qu'entrée dans le processus de génération de HLOD sans l'ajouter au monde lui-même.

Expérience utilisateur de configuration des HLOD

Nous avons retravaillé la configuration et les ressources des couches de HLOD de Paramètres du monde > World Partition afin d'améliorer la facilité d'utilisation lors de la création ou de la modification d'une configuration.

Génération procédurale de contenu (PCG)

Le framework de PCG est prêt pour la production

À l'occasion de la sortie de la version 5.7 de l'UE, le framework de génération procédurale de contenu (PCG) est désormais prêt pour la production.

Bien que ce framework soit en développement continu et continue d'évoluer, nous nous sommes engagés à soutenir un environnement stable afin que toutes les productions puissent s'appuyer sur cette trousse à outils de génération procédurale de contenu rapide et itérative pour les cas d'utilisation à l'exécution et dans l'éditeur.

Mode Éditeur de PCG

Un nouveau mode d'outil d'éditeur spécifique à la PCG est désormais disponible dans l'Unreal Engine. Il offre une bibliothèque d'outils personnalisables tirant parti du framework de PCG, permettant notamment de dessiner une spline, peindre ou créer un volume, chaque fonction étant associée à un graphique de PCG, avec des paramètres disponibles pour modification en direct.

Vous pouvez utiliser les graphiques de PCG spécifiques aux outils fournis en l'état ou en tant qu'exemples pour créer la bibliothèque et la développer en fonction de vos besoins.

Editeur de végétation procédurale

L'Éditeur de végétation procédurale est un nouveau plug-in expérimental permettant de créer et de modifier des maillages de végétation, avec prise en charge de la végétation Nanite, directement dans l'Unreal Engine.

Dans cette version initiale, les ressources de végétation procédurale que vous créez sont modifiées à l'aide de l'éditeur de végétation, un éditeur de graphe de nœud basé sur la PCG. En utilisant le nœud importateur fourni et les préréglages squelettiques distribués dans le dossier de contenu du plug-in, vous pouvez :

• Modifier la forme des arbres grâce aux opérateurs de gravité, de sculpture et d'échelle.

• Ajuster la répartition des feuilles et des branches.

• Attribuer différents modèles de feuilles.

• Exporter vers un maillage squelettique ou un maillage statique, ce qui comprend la prise en charge des assemblages de végétation Nanite.

Vous pouvez créer plusieurs variantes à l'aide d'un ou de plusieurs graphes de nœuds afin de constituer une bibliothèque de maillages de végétation originaux pour votre projet.

Flux de travail des ressources

Vous pouvez désormais exécuter les graphiques PCG en tant que graphiques autonomes, sans avoir besoin du contexte du monde et sans que le graphique soit généré à partir d'un composant PCG.

Cette modification entraîne la prise en charge :

• des flux de travail de création de ressources, comme la création de maillages à l'aide des opérations de géométrie, de textures avec des opérations de processeur graphique ou même la génération de ressources de données PCG, comme des tableaux de données d'attributs, en exécutant uniquement un graphique de PCG autonome ;

• des outils de création de ressources et les plug-ins créés dans le noyau de framework de PCG, comme le nouveau Procedural Vegetation Editor, bénéficient de son ensemble complet des fonctionnalités et de ses futures mises à jour.

Pour activer l'exécution autonome des graphiques de PCG, vous pouvez activer la nouvelle option Est un graphique autonome, disponible dans les paramètres de chaque graphique. Lorsque cette option est activée, vous avez accès au menu de clic droit Générer un ou plusieurs graphiques autonomes ainsi qu'à la possibilité de générer, d'inspecter et de déboguer à partir de l'éditeur de graphique en utilisant un objet de débogage de graphique autonome.

Types de données personnalisés

Depuis la première version, nous codions en dur la liste des types de données pris en charge dans le framework de PCG, ce qui rendait difficile l'ajout et la prise en charge de nouveaux types de données lors de l'extension du framework ou de la création d'interopérabilités avec des plug-ins externes.

Dans l'UE 5.7, vous pouvez désormais ajouter la prise en charge de n'importe quel type de données personnalisé dans la hiérarchie des types et étendre le framework, ou utiliser le noyau du framework et l'ensemble des fonctionnalités pour y ajouter votre propre outil.

Nous avons également amélioré le sélecteur de type afin de mieux indiquer les relations entre les types et de permettre la multisélection.

Type de données et opérateurs Polygon2D

Nous avons ajouté un nouveau type de données Polygon2D à la liste des types de données pris en charge dans le framework de PCG.

Les données Polygon2D sont utiles pour représenter des zones sous une forme fermée convertible en données de surfaces ou de splines, pour échantillonnage ou pour des opérations spécifiques.

Nous avons ajouté un ensemble de nouveaux opérateurs pour prendre en charge ce nouveau type de données :

• Créer un polygone 2D : prend en entrée des données de point ou de spline et les convertit en polygone 2D.

• Opérations de polygone : permet d'effectuer des opérations de polygone à polygone, comme des intersections, des unions et des différences. Les polygones 2D peuvent aussi être découpés avec des chemins, à l'aide de splines, pour subdiviser ou isoler des formes. Cela permet par exemple le découpage d'une zone plus large à l'aide de données de spline selon un motif de grille afin de créer des blocs de ville distincts dans un graphique générateur de ville.

• Détourer les chemins : permet d'intersecter ou de différencier des splines avec des formes de polygone 2D.

• Décaler le polygone : applique un décalage aux polygones 2D pour les agrandir ou les réduire en gérant correctement les chevauchements.

• Créer une surface à partir du polygone 2D : transforme le polygone 2D en surface échantillonnable à l'aide du nœud Surface Sampler pour créer des points à sa surface.

Interopérabilité GPU FastGeo

Le GPU de PCG exploite désormais les composants FastGeometry pour améliorer encore les performances des threads de jeu lors de l'utilisation du framework pour générer et faire apparaître une forte densité de maillages statiques, comme la transluminescence du sol et l'herbe. Cela élimine le besoin de tout acteur de partition et crée des composants de PCG locaux à la volée.

Pour bénéficier de cette amélioration, activez le plug-in PCG FastGeo Interop dans votre projet et réglez la CVAR pcg.RuntimeGeneration.ISM.ComponentlessPrimitives sur 1.

Opérateurs et améliorations GPU

Nouveaux ajouts à l'ensemble de fonctionnalités de calcul GPU du framework de PCG :

• Scene Capture : nouveau nœud pour effectuer des captures de scène à partir de l'origine du composant afin d'obtenir et d'échantillonner la couleur ou la profondeur de scène pour la transluminescence.

• Save Texture to Asset : nouveau nœud pour précalculer PCGTextureData dans une ressource UTexture2D.

• Prise en charge des remplacements : les remplacements de paramètres sont désormais pris en charge sur les nœuds GPU, y compris le nombre d'éléments pour les nœuds HLSL personnalisés.

Les opérateurs natifs existants sont mis à niveau, avec prise en charge du calcul GPU :

• Points d'élimination en dehors des limites de l'acteur

• Points de transformation

Améliorations de l'expérience utilisateur

Voici les dernières améliorations apportées à l'expérience utilisateur de PCG :

• Coloration et validation des types de paramètres et de remplacements : les paramètres, les broches de remplacement, les broches de sortie constante et leurs arêtes sont désormais tous colorés en fonction de leur type, ce qui correspond au langage visuel des couleurs des types de blueprints. Lorsqu'une commande peut être de tout type ou n'est pas définie, la broche et l'arête utilisent le blanc comme couleur d'affichage.

• Valeurs des paramètres min, max et unités : vous pouvez désormais configurer les paramètres de graphique avec les valeurs min/max et les unités à afficher.

• Contrôles des hublots de données : nous avons ajouté des contrôles et des options pour les hublots de données dans l'éditeur de graphiques afin de faciliter l'aperçu des données dans des contextes spécifiques.

Nœuds et opérateurs

L'Unreal Engine 5.7 met en place de nombreux éléments PCG natifs et de nouvelles options, notamment :

• Intersection de splines : trouve les splines qui se croisent en 3D et ajoute des points de contrôle à l'intersection ou renvoie les points d'intersection.

• Splines divisées : divise les splines en plusieurs splines en fonction des prédicats d'alpha, de distance, de clé ou de points de contrôle.

• Obtenir un segment : renvoie un point ou une spline d'index de segment à partir d'un point, d'une spline ou d'un polygone 2D.

• Faire apparaître les remplacements de composant du maillage de spline : la classe de composant est maintenant respectée lors de l'apparition du maillage de spline, et les remplacements de propriété de composant du nœud Spawn Spline Mesh sont pris en charge.

• Nouvelles classes d'éléments de blueprint de PCG : ajout de nouvelles classes d'éléments de PCG, dont des fonctions remplaçables basées sur la plage pour prendre en charge la structure des changements de format de matrice mise en place dans les nœuds natifs à l'occasion de la version 5.6. L'utilisation des nouveaux éléments évite une transformation supplémentaire des données et améliore les performances lorsque vous travaillez avec des éléments de BP de PCG.

• Obtenir le contexte d'exécution : mis à jour avec la prise en charge des contextes Is Listen Server, Has Authority et Is Builder.

• Extraire l'attribut : récupère un attribut spécifique à l'index donné et le restitue sous la forme d'un nouvel ensemble d'attributs.

• Exporter les attributs sélectionnés : exporte les données au format binaire ou JSON pour les cas d'utilisation externes, comme les applications ML.

• Remappage des attributs : désormais pilotable par une courbe.

• Opérateurs de bits : ajout du décalage vers la gauche et du décalage vers la droite.

• Opérateurs booléens : ajout de NAND, NOR, XNOR, IMPLY, NIMPLY et de la projection automatique de bit à booléen.

• Opérateurs mathématiques : une nouvelle opération Ajouter le modulo, utile pour décaler et réordonner à l'aide d'index, a été ajoutée.

• Limites du maillage et des points de maillage : ajout de la prise en charge des maillages squelettiques.

Plug-in d'interopérabilité pour Python

Nous avons ajouté un nouveau plug-in de PCG, qui fournit un nouveau nœud Execute Python Script afin que vous puissiez exécuter des scripts Python pendant l'exécution des graphiques. Vous pouvez fournir le script Python directement en tant qu'entrée ou l'exécuter à partir d'un fichier sur le disque. Vous pouvez définir le chemin d'accès au fichier de manière dynamique au moyen d'un remplacement d'attribut ou de paramètre de chemin d'objet logiciel.

Itération de développement

Préparation incrémentielle (Bêta)

La préparation incrémentielle est maintenant disponible en version Bêta dans l'UE 5.7.

La préparation incrémentielle vous permet d'itérer plus vite sur vos appareils cibles en réduisant le temps de préparation global. Les processus de préparation analysent automatiquement les modifications apportées aux ressources par rapport aux données stockées dans Zen Server, et ne préparent que les nouvelles mises à jour apportées aux ressources de votre projet. Cela fonctionne pour toutes les ressources de moteur natives, y compris les blueprints et tuiles World Partition.

Outils CPP - Prise en charge de MSVC 14.44

Dans l'Unreal Engine 5.7, nous avons mis à jour le compilateur Microsoft Visual C++ par défaut vers MSVC 14.44.

Suivi et visualisation de l'état de la version (expérimental)

Dans le cadre de l'outil d'analyse Horde, nous avons introduit une nouvelle fonctionnalité expérimentale Tableau de bord d'état de la version qui permet aux équipes de surveiller et d'inspecter les étapes de BuildGraph à travers les listes de changements des projets qui se terminent comme prévu et/ou qui signalent des erreurs.

Elle s'inscrit dans un développement en cours visant à fournir des fonctionnalités intégrées dans Horde pour aider les équipes à mieux comprendre la cause la plus fréquente des échecs de création, surveiller la pression sur les pools d'agents et d'autres mesures de performances de création utiles qui entravent vos temps d'itération.

Audio

Audio Insights (Bêta)

Audio Insights est notre outil principal pour profiler et déboguer de l'audio. Toute personne utilisant de l'audio dans l'Unreal Engine peut s'en servir. Dans cette version, en plus de la stabilisation de l'API et de l'architecture, nous fournissons une version Bêta d'Audio Insights. Elle comprend les fonctionnalités de base suivantes :

Suivi

• Démarrez une session de suivi en direct sans écrire de données sur le disque.

• Les concepteurs sonores peuvent observer le fonctionnement d'un projet, dans des sessions autonomes ou dans des sessions d'éditeur, sur de longues durées sans se soucier de l'espace disque disponible.

Prise en charge de l'éditeur

• Utilisez Audio Insights pour des cas d'utilisation dans l'éditeur, en plus de PIE.

• Audio Insights réagit maintenant à toute interaction audio dans l'éditeur.

Enregistrement de queues et d'instantanés

• Écrit les dernières données de session en direct sur le disque à la demande, jusqu'à 32 Mo.

• Audio Insights peut détecter si une session en direct a commencé pour s'y connecter.

Mesure de l'intensité sonore en direct (UX Design)

• Fournit des mesures audio en mode autonome, spécifiquement pour la conformité à l'intensité sonore.

Historique des événements à défilement

• Affiche une liste de texte chronologique d'événements audio, comme le lancement et l'arrêt du son, avec horodatage.

• La sélection d'un événement spécifique déplace le traçage et les autres visualisations au même horodatage dans les données.

Configuration des nœuds MetaSound

La configuration des nœuds MetaSound apporte une nouvelle couche d'expressivité aux MetaSounds, de façon à ce qu'un nœud puisse modifier ses entrées et sorties. La configuration des nœuds utilise le panneau Détails de l'éditeur MetaSound pour modifier les interfaces des nœuds et sérialiser les données annexes utilisables lors du rendu audio.

Outre la possibilité pour les concepteurs sonores et les développeurs de créer des nœuds plus nuancés et interactifs, la configuration des nœuds procure également une amélioration de l'expérience utilisateur. Par exemple, la palette de nœuds est plus épurée, et le nombre d'étapes ainsi que la complexité du recâblage réduits pour de nombreuses tâches de conception MetaSound courantes.

Plug-in de sous-titres audio

Les sous-titres audio sont nécessaires à l'accessibilité (systèmes de dialogue, sous-titrage codé et discussion vocale). À l'occasion de l'Unreal Engine 5.7, nous avons continué d'enrichir le plug-in Subtitle des ajouts suivants :

• Les sous-titres peuvent désormais être pilotés par d'autres types de SoundBase, en plus du SoundWave d'origine et de la prise en charge indépendante de la synchronisation introduite dans la version 5.6.  Ainsi, les sous-titres peuvent maintenant se caler sur des signaux sonores ou sur le niveau le plus élevé d'un MetaSound.

• Par défaut, les sous-titres joints aux données utilisateur d'une ressource USoundWave sont automatiquement lus et arrêtés en fonction du moment auquel l'audio commence et s'arrête.  Un cas d'utilisation permet cependant d'utiliser la propriété de durée de sous-titre. Nous avons ajouté une enum pour permettre à l'utilisateur de choisir quelle durée utiliser.

• Plusieurs sous-titres sont désormais pris en charge dans la ressource de données utilisateur.  Au lieu d'utiliser plusieurs ressources pour plusieurs sous-titres associés à un effet sonore donné, tous les sous-titres sont maintenant à votre disposition dans une seule ressource.

• Vous pouvez désormais activer ou désactiver l'ensemble des sous-titres à l'aide d'UEngine::bSubtitlesEnabled.

Éditeur de forme d'onde audio

Lorsqu'ils travaillent avec des ressources audio, les concepteurs sonores doivent souvent aller et venir entre l'UE et un outil externe. Pour faciliter leur flux de travail dans l'Unreal Engine 5.7, nous avons ajouté l'affichage de marqueurs et de régions de boucle provenant de fichiers sonores importés dans l'éditeur de forme d'onde audio.

Des améliorations ont notamment été apportées à la convivialité pour étendre l'éditeur d'onde afin qu'il soit suffisamment fonctionnel pour que les concepteurs sonores puissent rester dans l'Unreal Editor et effectuer les tâches courantes d'édition audio.

Format / Types indépendants de canaux (CAT)

Les concepteurs sonores doivent souvent envoyer et recevoir des données audio sur plusieurs canaux entre des nœuds MetaSound spécifiques dont le format et le nombre de canaux peuvent varier. Dans l'UE 5.7, les programmeurs audio peuvent coder des nœuds personnalisés contenant des références d'entrée et de sortie à l'aide des types indépendants des canaux (Channel Agnostic Types, CAT) :

• Le nouveau type de données de débit audio permet aux tampons audio de prendre en charge plusieurs canaux sur un même type de broche.

• Les nœuds peuvent maintenant prendre en charge plusieurs configurations de formats de canaux audio.

• L'encombrement et la complexité des graphiques MetaSound sont réduits.

Échantillon d'outils Tech Audio

L'expérience et l'utilisation par Tech Audio de l'utilitaire d'éditeur peuvent être extrêmement bénéfiques pour la communauté Game Audio. Cette initiative vise à faciliter l'intégration des nouveaux développeurs dans l'audio de l'UE, à rendre le travail à grande échelle moins intimidant et à servir de point de départ pour les développeurs qui créent leurs propres outils spécifiques au projet.

• Un ensemble d'utilitaires de script de blueprint, d'outils et de graphiques sont disponibles pour aider à prendre en main la technologie audio d'Unreal.

• Tech Audio souhaite créer un exemple de collection d'utilitaires et de flux de travail d'éditeur à utiliser en interne et à présenter en externe.

Plateforme

Prise en charge de la plateforme Android

Nous avons optimisé les flux de travail pour les développeurs qui créent, empaquettent et déploient des projets Unreal Engine sur des appareils Android.

• Déploiement sur Android 15 avec prise en charge des pages de 16 Ko

• Il est maintenant possible d'ignorer les réglages de la configuration manuelle de SDK sur macOS.

• Le paramètre bDontBundleLibrariesInAPK est désormais activé par défaut, ce qui garantit que les bibliothèques restent externes, pour des tailles de paquets et une flexibilité de déploiement optimisées.

Outil de rendu mobile

L'Unreal Engine 5.7 apporte des améliorations et de nouvelles fonctionnalités à l'outil de rendu mobile.

Vous pouvez maintenant utiliser le mode de rendu différé Multipass qui active les ombres de contact et les ombres à insert.

De plus, SSAO, SSR et DFAO sont désormais des options d'évolutivité que vous pouvez activer ou désactiver à l'exécution, sans avoir à les définir comme options de projet ni à les réempaqueter.

Couche stéréo

Les composants de couche stéréo sont désormais visibles quand l'axe X pointe vers la caméra. Pour revenir à l'ancien comportement (visible lorsque X pointe dans la direction opposée de la caméra), utilisez la variable de console : XR``.StereoLayers.UseLegacyFacing true.

Les couches stéréo émulées prennent désormais en charge la profondeur et sont conformes à OpenXR dans leur façon d'effectuer le rendu. Vous pouvez désactiver le nouveau rendu en utilisant la variable de console : XR``.StereoLayers.RenderEmulatedLayerDepth false.

OpenXR Application SpaceWarp

Application SpaceWarp est une technologie d'optimisation développée par Meta qui permet d'augmenter la puissance de calcul disponible pour le contenu adapté. Dans l'UE 5.7, nous avons implémenté la prise en charge non seulement de l'extension XR_FB_space_warp de Meta, mais également des exécutions OpenXR qui prennent en charge  XR_EXT_frame_synthesis. . Cette technologie force l'application à rendre à une demi-fréquence d'images et synthétise une image sur deux à l'aide d'une orientation de tête actualisée, ce qui réduit considérablement la charge du GPU.

La synthèse d'image (et SpaceWarp) est contrôlée via xr.OpenXRFrameSynthesis. Elle peut être activée à l'exécution, mais nécessite r.Velocity.DirectlyRenderOpenXRMotionVectors=1.

Présence utilisateur OpenXR

Nous pouvons désormais renvoyer des événements lorsqu'un casque de réalité virtuelle (HMD) est mis ou retiré pendant les moments d'exécution d'OpenXR qui prennent en charge l'extension XR_EXT_user_presence. Bien que cela ait déjà été le cas via VRNotificationsComponent, la nouvelle méthode est plus précise et se comporte de la même façon entre les exécutions.

Motion Design

Prêt pour la production Motion Design

À mesure que les clients intégreront Motion Design à leurs flux de travail principaux, l'équipe Motion Design continuera de recueillir les retours des clients et de se concentrer sur les possibilités d'optimisation des performances de la trousse à outils.

Voici ce dont vous avez besoin pour faire en sorte que Motion Design soit prêt pour la production :

• une prise en charge renforcée de l'empaquetage.

• la refactorisation de Text3D de manière à prendre en charge le texte enrichi et la capacité de masquage.

• une logique de transition stable avec une utilisation et une configuration facilitée.

• l'amélioration de la fonctionnalité de levier de déverrouillage en ajoutant des outils d'organisation de l'interface et en refactorisant l'expérience utilisateur globale pour accélérer le temps de configuration.

• l'amélioration de l'état de scène en fonction des retours des clients.

• la mise en place d'une communication entre l'état de scène et la logique de transition.

• la fiabilité assurée du concepteur de matériau.

Text3D : texte enrichi

Donnez une touche dynamique à vos dispositions de texte grâce à du texte préconfiguré ou personnalisable de manière dynamique. Créez un ensemble de styles Text3D en utilisant notre nouvelle ressource dédiée, avec laquelle vous pouvez créer une configuration cohérente exploitable dans tout votre projet, pour n'importe quel acteur Text3D.

Auparavant, ce type de disposition nécessitait plusieurs acteurs Text3D et un modificateur Auto-Follow. Dans l'Unreal 5.7, vous pouvez les modifier en ligne, ce qui réduit le nombre d'acteurs et permet même de contrôler séparément à distance les sections de texte.

• Prise en charge de l'assignation de polices, de couleurs, de tailles, etc.

• Les outils de style s'adaptent à n'importe quelle direction artistique.

• Idéal pour les conceptions avec une IU dynamique.

• Expose chaque section de la ligne de texte au levier de déverrouillage, pour davantage de personnalisation.

  • Cela est utile si, par exemple, vous souhaitez dissocier "Brand New Enriched Text" en trois contrôleurs distincts, tout en conservant le style de chaque mot.

Qualité de vie de la logique de transition

La logique de transition est essentielle dans le flux de travail de diffusion. De plus, en nous basant sur des retours clients, nous avons réévalué les étapes nécessaires à la création d'un niveau et à la configuration d'une logique de transition. Vous pouvez maintenant effectuer toutes les étapes présentées dans l'image ci-dessus en créant un nouveau niveau et en vous assurant d'activer l'option Créer une scène par défaut pour la logique de transition, comme montré dans le coin supérieur gauche de l'image.

Voici les étapes de configuration que la logique de transition automatise lorsque vous activez l'option Créer une scène par défaut pour la logique de transition :

• Création de séquences d'entrée et de sortie pré-étiquetées.

• Création de séquences de modification de couches pré-étiquetées.

  • Ajout possible de séquences de modification de couches supplémentaires (et préassignées) avec de nouvelles entrées dans le panneau d'options de Sequencer.

• Préconfiguration des paramètres de séquences sur ces séquences pour une compatibilité immédiate.

• Création d'une couche par défaut pour vous permettre de travailler et de tester immédiatement votre conception.

• Ajout du modificateur de sous-couche de logique de transition à un acteur null dans votre organiseur Motion Design et sa préassignation aux séquences d'entrée et de sortie générées.

Tout ce qu'il vous reste à faire est d'animer votre contenu à l'aide des séquences d'entrée, de sortie et de modification générées.

Expérience utilisateur de levier de déverrouillage

Nous avons ajouté ou amélioré plusieurs fonctionnalités pour vous faire gagner du temps lors du squelettage de vos conceptions.

Nouveaux contrôleurs

• Catégorie

  • Ajout de catégories pour séparer vos contrôleurs en groupes.

  • Sélection simple ou multiple de vos contrôleurs, qu'il est possible de faire glisser dans les catégories.

• Liste de chaînes

  • Création d'une liste déroulante nommée que vous pouvez associer à vos comportements conditionnels pour améliorer l'expérience utilisateur final.

  • Auparavant, pour résoudre ce problème, vous deviez saisir des entiers tels que " 1 = Bleu, 2 = Rouge, 3 = Jaune". À présent, vous pouvez nommer les entrées du menu déroulant Rouge, Bleu, Jaune.

• Événements

  • Création d'un bouton qui permet de lancer des séquences Motion Design, de déclencher une propriété On Modify ou de déclencher un événement de diffusion.

Comportement de chemin

• Auparavant, chaque entrée de comportement de chemin ne pouvait traiter qu'un seul acteur. À présent, une liste apparaît sous le panneau Actions où vous pouvez ajouter autant d'acteurs que vous le souhaitez, ce qui réduit le besoin de plusieurs comportements de chemin et facilite le dépannage de votre configuration.

• La réorganisation de la liste de chemins était auparavant impossible. À présent, vous pouvez utiliser l'indicateur de glissement du côté gauche pour réorganiser la liste.

• L'aperçu du chemin vous indique maintenant si le chemin de routage est valide ou non via une coche verte.

Amélioration d'IU

• Nous avons ajouté une icône de lien au panneau des propriétés du côté gauche pour indiquer si une propriété exposée est assignée à un contrôleur.

État de la scène

Dans l'UE 5.7, l'état de la scène a bénéficié de plusieurs nouvelles fonctionnalités et améliorations de l'expérience utilisateur qui optimisent grandement le contrôle utilisateur :

• Organisation de la machine à état

  • Réorganisation des machines à état par glisser-déposer.

  • Ajout de catégories

• Ajout de tâches Setter en tant que partie intégrante des références de propriété.

  • Parmi les types de données figurent : booléen, float, int, chaîne, texte.

    • Chaque type de donnée présente des fonctionnalités uniques.

• Fonctions de propriété

  • Concaténer une chaîne

  • Texte en chaîne

  • Nom en chaîne

  • Entier en chaîne

  • Float en chaîne

• Génération d'acteurs et génération d'acteurs en tickers.

Data Link

Data Link a reçu deux mises à jour très demandées :

• Fonctionnalité d'envoi push, qui fournit une méthode pour détecter en continu les modifications de valeur dans les flux et déclencher des mises à jour.

• Interaction avec l'état de scène pour fournir une méthode permettant de faire défiler des tickers et d'autres éléments actifs.

Pipeline de rendu de production

Modificateur de collection de paramètres de matériau

Les collections de paramètres de matériau sont des ressources puissantes qui peuvent piloter simultanément plusieurs propriétés sur plusieurs matériaux. Les aspects et les effets créatifs au sein d'une scène sont souvent déterminés de manière dynamique par des collections de paramètres de matériau.

Le modificateur de collection de paramètres de matériau permet de définir et de remplacer les valeurs des paramètres pour chaque couche de pré-rendu dans Movie Render Graph. En utilisant le même niveau et la même séquence de niveau, vous pouvez rendre des plans avec des valeurs de paramètres différentes sur chaque couche de rendu. Vous pouvez également transformer les paramètres en variables de graphique et les exposer en tant que remplacements dans les fenêtres Quick Render et Movie Render Queue.

Type de gravure par sortie

La possibilité de rendre plusieurs types de sorties dans une même tâche permet à Movie Render Graph de produire à la fois des médias finaux et des médias de révision simultanément. En général, la gravure est souhaitée pour certains types de sorties dans une tâche, mais pas pour tous. Pour tenir compte de ce point, Movie Render Graph définit désormais le type de gravure par sortie au lieu d'utiliser un nœud séparé dans un embranchement. Cela simplifie grandement le fait d'avoir, par exemple, des rendus EXR clairs, mais avec des gravures sur les MP4.

Contrôle de nommage des fichiers

Des conventions d'affectation de noms strictes sur la sortie de rendu sont un pilier fondamental pour des pipelines efficaces, dans tous les secteurs. C'est dans cette idée que Movie Render Graph offre un meilleur contrôle de nommage de fichiers, afin de mieux prendre en charge les exigences de dénomination spécifiques aux studios de façon native, sans avoir recours à des scripts de pipeline supplémentaires. Les améliorations clés sont les suivantes :

• Prise en charge des jetons de nommage personnalisés définis dans les outils d'assemblage cinématiques, dans tous les champs de nom.

• Vous pouvez personnaliser {renderer_name} (par exemple, "Deferred") et {renderer_sub_name} (par exemple, "beauty"), et les conflits sont résolus par embranchement plutôt que pour l'ensemble du graphique, ce qui offre davantage de flexibilité.

• La gravure n'impose plus {renderer_name} sur le Beauty Render lorsqu'il n'est pas composé.

• Les passes de matériaux de post-traitement peuvent utiliser une convention d'affectation de noms distincte de celle du Beauty Render si vous le souhaitez.

Métadonnées EXR par couche de rendu

Les métadonnées EXR suivent désormais une convention qui sépare de manière fiable les paires clé/valeur par couche de rendu et évite les conflits de noms. Avec cette convention, les métadonnées issues des rendus de l'Unreal Engine peuvent être interrogées directement dans des applications de post-composition comme Nuke, sans nécessiter d'outils de pipeline supplémentaires.

Pipeline de contenu

Personnaliser l'importation de ressources USD avec Interchange (expérimental)

USD est un format de fichier de description de scène polyvalent, de plus en plus utilisé dans l'industrie 3D.

Nous avons ajouté USD à la liste des formats de fichiers pris en charge par le framework d'Interchange dans l'UE 5.5. Les créateurs de contenu bénéficient d'un meilleur contrôle sur le processus d'importation et peuvent désormais ajouter des étapes de traitement personnalisées pour l'importation de ressources USD, à l'instar des fonctionnalités Interchange déjà disponibles avec d'autres formats, tels que FBX.

La prise en charge d'USD via Interchange est considérée comme expérimentale et se limite à l'importation de ressources. Dans l'UE 5.7, nous avons ajouté la prise en charge des éléments suivants :

• Structure capillaire

• Éclairages dômes (pas le schéma DomeLight_1)

• Audio (UsdMediaSpatialAudio)

• Instance de point

Importation de niveau FBX avec Interchange

Afin d'harmoniser l'IU et l'expérience utilisateur d'importation des différents formats de fichiers dans le moteur, le processus d'importation de niveau FBX est désormais disponible via le framework d'Interchange. Il s'agit dorénavant de l'accès prédéfini pour importer un fichier FBX dans un niveau. Vous pouvez toujours revenir à l'ancien comportement au moyen d'une CVar.

La principale modification réside dans l'utilisation de la même boîte de dialogue que lors d'une importation dans le dossier de contenu. Les anciennes fonctionnalités, telles que le retrait de ressources ou d'acteurs de l'importation, ou l'utilisation d'un ensemble d'options différentes, peuvent désormais s'effectuer via des pipelines Interchange personnalisés.

Éditeur et systèmes d'IU

Assistant IA (expérimental)

L'assistant IA vous permet d'obtenir des réponses plus rapidement sans quitter l'Unreal Engine. En faisant glisser un panneau dédié dans l'éditeur, vous pouvez poser des questions, générer du code ou suivre des conseils étape par étape, le tout sans passer par un navigateur.

Vous économisez ainsi du temps et restez dans le flux. Pour ne pas interrompre votre concentration en effectuant des recherches en ligne, vous pouvez obtenir instantanément de l'aide, des exemples et des conseils de dépannage directement dans l'éditeur.

Ce que vous pouvez faire :

• Obtenir des instructions étape par étape pour les tâches.

• Obtenir des conseils et des astuces directement dans le contexte.

• Résoudre des problèmes de développement avec l'aide de l'IA.

• Générer des exemples de code pour accélérer les flux de travail.

• Retrouver des échanges antérieurs grâce à l'historique de chat.

• Copier et coller les réponses dans votre projet.

L'assistant IA est alimenté par la même IA spécialement entraînée déjà disponible dans l'UEFN et sur la communauté des développeurs, adaptée pour comprendre l'Unreal Engine et vous aider à aller plus vite.

Écran d'accueil

L'écran d'accueil vous aide à vous orienter dans l'Unreal Engine en vous offrant un point de départ accueillant. Il met en lumière les ressources essentielles, comme les tutoriels, la documentation et les forums.

Vous bénéficiez d'une expérience d'initiation plus facile et mieux encadrée. Au lieu de faire face à un éditeur vide, vous accédez facilement à des ressources d'apprentissage, à des actualités et à de l'assistance, le tout au même endroit, ce qui vous aide à démarrer vos projets en toute confiance.

Ce que vous pouvez faire :

• Accéder aux actualités et mises à jour les plus récentes.

• Accéder directement aux ressources de démarrage.

• Ouvrir les tutoriels et la documentation.

• Visiter les forums et les notes de version.

• Ouvrir les liens externes dans Chrome.

• Désactiver l'écran d'accueil si vous préférez ne pas le voir à chaque fois.

L'écran d'accueil sert de centre d'initiation unique, rendant l'Unreal Engine plus accessible dès le premier lancement.

Interactions de détourage orthographique

Les hublots orthographiques offrent désormais un contrôle plus fiable et plus souple. Dans les versions antérieures, les plans de détourage étaient souvent inutilisables, ce qui rendait difficile l'ajustement de ce qui était visible dans la scène.

Vous bénéficiez d'un contrôle précis sur ce que vous voyez dans les vues orthographiques, ce qui vous permet de vous concentrer plus facilement sur la géométrie dont vous avez besoin.

Ce que vous pouvez faire :

• Ajuster plus précisément les plans de détourage proches et lointains.

• Utiliser de nouveaux contrôles visuels directement dans le hublot.

• Personnaliser la visibilité dans les vues orthographiques en fonction de votre flux de travail.

Cette amélioration, établie à l'occasion de l'UE 5.7, rend les flux de travail orthographiques plus pratiques et prévisibles.

Amélioration des boîtes de dialogue Enregistrer et Supprimer

Nous avons amélioré les boîtes de dialogue Enregistrer et Supprimer dans l'Unreal Engine pour simplifier la gestion des ressources. Les actions courantes fonctionnent désormais comme prévu, ce qui réduit les clics et les interruptions inutiles de votre flux de travail.

Vous passez moins de temps à lutter contre des invites répétitives et plus de temps à vous concentrer sur votre projet.

Ce que vous pouvez faire :

• Utiliser la touche Entrer dans la fenêtre contextuelle de suppression des ressources (précédemment indisponible).

• Supprimer plusieurs ressources sans avoir à cliquer plusieurs fois sur Accepter.

• Vous appuyer sur des interactions plus cohérentes et plus intuitives avec les boîtes de dialogue.

Ces améliorations arrivent dans l'UE 5.7 et rationalisent les flux de travail quotidiens en résolvant des problèmes connus de longue date.

Amélioration des interactions de glissement de fenêtre

Faire glisser des fenêtres à l'intérieur de l'éditeur est désormais plus intuitif et moins disruptif. Dans les versions précédentes, cliquer sur une barre d'en-tête et la faire glisser avait pour effet de désancrer entièrement l'éditeur de niveau, souvent par accident.

Vous évitez désormais les clics accidentels, et votre espace de travail reste stable, ce qui vous permet de vous concentrer sur la création.

Ce que vous pouvez faire :

• Faire glisser des fenêtres et des panneaux sans désancrer entièrement l'éditeur de niveau.

• Prévenir les interruptions accidentelles de vos flux de travail en plein écran.

• Bénéficier d'interactions plus prévisibles et plus conviviales avec les fenêtres.

Cette amélioration, obtenue à l'occasion de l'UE 5.7, répond à un problème bien connu des développeurs et rend la gestion des fenêtres plus fiable.

Amélioration des interactions avec les doublons de l'éditeur de blueprint

La duplication d'éléments dans l'éditeur de blueprint est désormais plus fluide et moins disruptive. Dans les versions précédentes, la duplication décochait votre sélection, vous obligeant à resélectionner manuellement les éléments dans l'arborescence.

Vous pouvez maintenant garder votre concentration lors de l'édition, en évitant les clics supplémentaires et les corrections lors de la duplication d'éléments.

Ce que vous pouvez faire :

• Dupliquer des éléments dans l'éditeur de blueprint sans perdre la sélection.

• Maintenir les sélections actives lors de l'utilisation de l'arborescence.

• Réduire les étapes répétitives lors de la duplication de plusieurs éléments.

Cette amélioration, établie à l'occasion de l'UE 5.7, rend la modification de blueprints plus efficace et moins contrariante.

Modes de hublot pour l'inspection géométrique

Les nouveaux Modes de hublot d'inspection géométrique de l'Unreal Engine offrent des options de visualisation simplifiées et non photoréalistes. Ces modes privilégient la clarté géométrique par rapport au réalisme, en supprimant les éclairages et les ombres lors de l'inspection de modèles 3D mécaniques ou complexes :

• Argile

• Zébré

• Face avant/arrière

• Couleur aléatoire

Balises de ressources utilisateur

Le système de balises de ressources utilisateur permet d'ajouter des balises arbitraires à vos ressources. Il prend en charge les favoris locaux ainsi que les balises à l'échelle du projet, et vous pouvez le développer de manière à suggérer des balises supplémentaires. Ces balises servent de base à des systèmes supplémentaires comme le Navigateur de ressources balisées utilisé dans Niagara. Sélectionnez les ressources à baliser, puis utilisez Ctrl + T ou sélectionnez Gérer les balises dans le menu contextuel.

Navigateur de ressources balisées (Niagara)

Une mise à jour de la précédente version du navigateur de ressources Niagara. Désormais généralisé, il jette les bases pour les fabriques de ressources qui souhaitent adopter le même navigateur. Vous pouvez le développer en créant une nouvelle ressource Configuration du navigateur de ressources balisées qui définit vos propres sections et balises répertoriées. Vos projets peuvent ainsi posséder leurs propres sections et balises ou remplacer entièrement la ressource de configuration principale dans les paramètres du projet sous Niagara Editor.

Pour obtenir de l'aide dans la mise à niveau des systèmes et émetteurs Niagara afin qu'ils utilisent la nouvelle ressource Configuration du navigateur de ressources balisées, consultez la page Mise à niveau des balises Niagara (Mettre à niveau les balises Niagara).

Framework

State Tree : débogueur de rembobinage

Nous mettons en place une nouvelle piste de débogueur de rembobinage pour State Tree, offrant une expérience de débogage enrichie, orientée propriétaire et instance, directement dans le débogueur de rembobinage. Cette intégration fournit un contexte plus précis sur le moment et la manière dont la logique comportementale s'exécute, tout en étant alignée avec les chronologies de gameplay et d'animation.

La nouvelle piste comprend un panneau Détails dédié avec une vue en arborescence compacte, facilitant la visualisation et la navigation dans des configurations logiques complexes, notamment dans les sous-arbres imbriqués et les ressources liées. Cela améliore l'expérience utilisateur si des State Trees de grande taille ou modulaires sont utilisés.

Bien que cette intégration marque une évolution vers un flux de travail de débogage plus unifié, le débogueur State Tree d'origine reste disponible en option. Vous pouvez continuer d'utiliser l'ancienne interface si vous le souhaitez pour certains cas d'utilisation.

Exécution de State Tree

Cette mise à jour apporte une série d'améliorations au niveau de l'exécution qui augmentent la justesse et les performances des logiques basées sur State Tree.

• Liaison de propriété en direct : les nœuds peuvent désormais envoyer dynamiquement des modifications de valeurs vers des sorties liées au moment de l'exécution, en utilisant des propriétés de sortie, ce qui corrige les problèmes de données obsolètes ou statiques dans les flux de travail à ticks.

• ExecutionRuntimeData : les nœuds peuvent maintenant déclarer des données optionnelles à long terme pendant toute la durée de vie de l'instance State Tree, ce qui est utile pour conserver l'état d'exécution à travers les transitions ou les ticks, sans avoir recours à des globales statiques.

• Optimisation de la mémoire pour les liaisons statiques : les répartiteurs, abonnés et références de propriétés délégués sont désormais stockés en dehors des données d'instance, ce qui réduit l'utilisation de mémoire par nœud.

Nous avons implémenté les fonctionnalités suivantes, mais sans les activer par défaut, de façon à éviter de perturber les comportements par défaut et les données existantes. Vous pouvez cependant choisir de les activer si vous le souhaitez.

• Accéder à nouveau au comportement d'état : ajout de la prise en charge pour accéder à nouveau au même état et redémarrer des tâches, ce qui vous permet d'implémenter des logiques de redémarrage plus facilement.

• Refactorisation de données d'instance : les conditions et transitions utilisent désormais des données instanciées à étendue, ce qui permet d'éviter les fuites de données entre sessions et d'utiliser des modèles d'utilisation temporaires et persistants.

Débogueur de masse

Nous avons introduit un nouveau puissant système de recherche d'entités intégré directement au débogueur Mass, offrant ainsi une nouvelle IU pour créer et exécuter des requêtes MassEntity. L'interface reflète l'API de requêtes Mass C++ 1:1, ce qui permet un filtrage précis des entités avec les mêmes critères et conditions que les requêtes codées en dur.

Vous pouvez désormais créer, enregistrer, charger et partager des requêtes personnalisées et visualiser immédiatement les résultats dans l'onglet Entités. Cela améliore la rapidité et l'efficacité avec lesquelles les développeurs inspectent et valident l'état de masse à l'exécution.

Nous avons également considérablement amélioré le système de Breakpoint, de façon à offrir davantage de contrôle et de visibilité lors du débogage des processeurs Mass et des écritures de fragments.

Configuration de sauts multiples Nav Link Autogen

Nous avons étendu la génération automatique de liens de navigation afin de prendre en charge plusieurs configurations de saut par passe de génération de maillage de navigation. Auparavant, vous ne pouviez utiliser qu'une seule configuration de saut, ce qui nécessitait souvent des tolérances trop larges pour gérer différents types de liens (par exemple, sauts vers le haut, vers le bas et traversants). Cela signifie également que tous les liens générés partageaient la même classe de zone et la même classe de proxy de lien, ce qui limitait la flexibilité.

Avec cette mise à jour, vous pouvez désormais définir plusieurs configurations distinctes, chacune traitée dans sa propre passe de validation. Cela permet un contrôle plus ciblé et pertinent. Par exemple, vous pouvez générer des sauts vers le bas et les sauts vers le haut séparément, chacun avec des seuils de distance, des types de zones ou des comportements de proxy différents. Cela rend possibles des configurations de déplacements plus nuancés tout en réduisant la surgénération ou les chevauchements non souhaités.

Afin d'assurer la compatibilité descendante, nous avons migré toutes les configurations à saut unique existantes en tant que première entrée dans la nouvelle configuration multiple setup.p State Tree Usability

Nous continuons d'enrichir l'expérience de l'éditeur State Tree de plusieurs améliorations apportées à la clarté et à la convivialité.

• Vous pouvez désormais copier et coller des tâches, des conditions et des transitions entre les états, même entre différentes ressources State Tree. Cela facilite grandement la réutilisation de logique et le maintien d'un comportement cohérent dans des comportements de grande envergure.

• Nous avons également ajouté la possibilité de copier et coller séparément des liaisons de propriétés. Les propriétés liées et non liées sont gérées de manière intelligente :

  • Les propriétés liées remplacent leurs liaisons si elles sont compatibles.

  • Les propriétés non liées conservent leurs valeurs si une valeur est collée ou maintiennent la liaison si une liaison compatible est collée.

  • La fonction permettant de coller une valeur sur une propriété de liaison est désactivée.

  • Coller un type incompatible, ou si les données sources sont inaccessibles, déclenche une erreur de validation.

• Vous pouvez masquer les propriétés dans les nœuds et les données d'instance en fonction du schéma, ce qui réduit le bruit visuel et améliore la concentration.

Exécution de Mass

Cette mise à jour introduit une série d'optimisations de bas niveau et d'améliorations architecturales apportées au framework Mass. Elle vise à améliorer les performances globales, l'efficacité de la mémoire et la stabilité du système dans des scénarios en temps réel.

L'ajout le plus notable est la répartition du temps processeur, qui permet de répartir les processeurs à exécution longue sur plusieurs images. Cela permet de réduire les irrégularités de performances et d'améliorer la répartition des charges de travail lourdes, ce qui est particulièrement utile dans les environnements à grande échelle ou à simulation lourde.

Iris (Bêta)

Avec Iris qui passe de phase expérimentale à phase Bêta, nous nous sommes concentrés sur la consolidation des API clés et l'amélioration de l'utilisabilité, de la maintenabilité et des performances sur l'ensemble de la pile réseau. Cette version inclut des modifications de conception internes et des optimisations de l'expérience utilisateur pour les développeurs qui travaillent directement avec les systèmes de réplication Iris.

• Remplacements de fabrique d'acteur : les acteurs peuvent désormais spécifier des implémentations NetActorFactory personnalisées à l'aide de StartReplicationParams, ce qui offre davantage de flexibilité dans le comportement de réplication au moment de l'exécution. Cela rend possibles des configurations de réplication avancées sans dépendre de remplacements globaux.

• Limites d'API plus nettes : nous avons supprimé la classe de base UReplicationBridge d'Iris afin de réduire la surcharge d'appels virtuels et de simplifier la navigation dans le code. La plupart des systèmes Iris dépendent déjà directement d'UObjectReplicationBridge. Ce changement rationalise donc le modèle d'héritage et évite toute indirection inutile.

• Amélioration du nommage du cycle de vie de réplication : nous avons clarifié l'API BeginReplication :

  • La fonction non virtuelle est désormais StartActorReplication. Elle indique clairement son objectif en tant que point d'entrée pour démarrer la réplication.

  • Nous avons renommé le rappel virtuel OnBeginReplication, de façon à distinguer le comportement du cycle de vie des appels système.

• Meilleure cohérence entre Iris et les anciens réseaux : OnBeginReplication et EndReplication sont désormais appelés de manière cohérente, quel que soit le statut d'activation d'Iris, ce qui garantit la parité des comportements et permet de fluidifier les transitions entre les systèmes réseau.

• Prise en charge d'un déplacement sans transition : Iris prend désormais en charge la fonctionnalité de déplacement sans transition de l'Unreal Engine, garantissant ainsi que les acteurs et les états répliqués sont correctement gérés à travers les transitions entre les mondes. il s'agit d'une condition clé pour la mise à disposition de fonctionnalités de jeu qui reposent sur des données de joueur persistantes ou des transitions entre de vastes mondes en chargement dynamique.

Médias

Visionneuse de médias (Bêta)

Les animateurs doivent souvent aligner leurs animations sur des séquences de référence existantes. Dans l'UE 5.6, nous avons ajouté la possibilité d'ancrer des médias (images, textures multimédias, fichiers vidéo, hublots en direct) à côté de l'endroit où le travail d'animation s'effectue. Deux banques AB, configurables horizontalement ou verticalement, permettent de comparer deux ensembles de ressources. Les commandes de zoom et de panoramique facilitent l'alignement du contenu. Dans l'UE 5.7, le plug-in Media Viewer est désormais en version Bêta, car il inclut les améliorations de flux de travail et d'expérience utilisateur suivantes :

• Amélioration des contrôles, comme la rotation et le zoom à l'aide de ALT + bouton droit de la souris.

• Possibilité d'ajouter des signets et de rappeler rapidement des configurations de ressources à l'aide de raccourcis clavier.

• Le bouton de verrouillage reflète désormais également les commandes de lecture et la chronologie en mode double lecteur.

Simulation et effets visuels

Système de destruction Chaos

Le système Chaos Destruction est une suite d'outils conçus pour obtenir des niveaux de destruction en temps réel et de qualité cinématique. Outre son impressionnant rendu visuel, ce système est optimisé pour les performances et offre aux graphistes et concepteurs un meilleur contrôle sur la création de contenu et le processus de fracturation, grâce à un flux de travail non linéaire et intuitif.

Parmi les mises à jour de l'UE 5.7 figurent :

• la réinitialisation d'état : vous pouvez maintenant réinitialiser l'état du composant de collection de géométrie en C++, Blueprint ou en direct dans l'éditeur pendant la simulation.

• l'exportation vers un maillage squelettique : vous pouvez désormais exporter des ressources de collection de géométrie dans une ressource de maillage squelettique.

• la sous-trace de nœud terminal : après un traçage sur une collection de géométrie, vous pouvez maintenant récupérer le nœud terminal exact depuis un tracé de ligne. Lorsqu'il n'est pas brisé, le tracé de ligne d'origine sur le composant renvoie l'os racine. Avec cette nouvelle fonction, vous pouvez maintenant obtenir l'os exact touché par le tracé. Cela permet notamment de placer des décalques sur les bons os ou même d'ancrer des pièces individuelles à l'exécution.

Chaos Dataflow Editor

Le graphique de flux de données rend possible la génération procédurale de ressources dans un environnement basé sur des nœuds. L'implémentation du graphique repose sur une évaluation par extraction, où chaque nœud génère un état de sortie mis en cache en fonction de l'évaluation de ses entrées. Les ressources Dataflow facilitent la création et la configuration procédurales des systèmes de simulation.

Chaos Cloth, Chaos Destruction, Chaos Flesh et Chaos Hair utilisent la trousse à outils unifiée basée sur les nœuds de flux de données.

Parmi les mises à jour de l'UE 5.7 figurent :

• De nouveaux contrôles de chronologie et de simulation.

• Une nouvelle barre d'outils.

• Un outil de texture de pondération repensé (pour correspondre à l'éditeur de maillage squelettique).

• Un nouvel outil de modification des pondérations de surfaçage (pour correspondre à l'éditeur de maillage squelettique).

• Un nouvel outil de modification des os de squelette.

• De nombreuses améliorations de la qualité de vie.

Chaos Visual Debugger

Le Chaos Visual Debugger (CVD) est un outil polyvalent conçu pour enregistrer et lire l'état d'une simulation physique pendant le jeu. Il prend en charge l'enregistrement de tous les solveurs Rigid et RBAN actifs, y compris l'état des particules et les données de collision. CVD est accessible sous forme d'éditeur dans l'Unreal Engine et offre de nombreuses possibilités de personnalisation, comme le choix de canaux de données spécifiques à enregistrer, via l'IU ou les commandes de console.

L'outil offre également des fonctionnalités de débogage en direct, qui permettent d'inspecter en temps réel les données physiques lors de la simulation. CVD propose aussi diverses options de visualisation, telles que l'état des particules, les données de collision et les requêtes de scène, pour vous aider à analyser et à dépanner efficacement les simulations physiques.

Parmi les mises à jour de l'UE 5.7 figurent :

• Améliorations des noms d'objets : dans cette version, nous avons mis en place une nouvelle fonctionnalité appelée métadonnées de particules.

  • Ces nouvelles métadonnées remplacent l'ancienne longue chaîne "Debug Name".

  • CVD affiche maintenant le nom de l'acteur qui possède le nom du corps physique et le décompose en différents champs (index de niveaux, de composants et d'os).

  • Nous avons également mis en place un bouton Rechercher dans le navigateur de contenu, qui permet d'exploiter ces nouvelles métadonnées et de trouver en un clic le blueprint d'où provient un corps spécifique.

• Améliorations des performances : dans cette version, nous avons continué d'améliorer les performances de CVD.

  • Les fichiers CVD qui contiennent une grande quantité de données (notamment plus de 2 GB de données de géométrie de collision) se chargent maintenant jusqu'à 30 % plus vite.

  • Réduction d'un blocage de plus de 10 secondes qui pouvait survenir lors du chargement de la première image de scènes complexes (contenant plus de 93 000 objets) à environ 3 secondes.

• Cette version contient également des correctifs de bogues et des améliorations QoL.

Chaos Cloth

Les demandes de simulation de vêtements et de tenues complexes étant toujours plus fréquentes dans le moteur, nos anciens éditeur et flux de travail de vêtements à maillage squelettique ne s'adaptent pas facilement aux futures mises à niveau nécessaires pour y répondre. Les travaux liés aux tenues et à la plupart des personnages ont presque exclusivement recours à des CCN spécialisés dans la construction de patrons de textiles. Afin de nous adapter à ces CCN externes, nous développons notre éditeur de vêtements pour intégrer et modifier les configurations de patrons, tout en peaufinant le flux de travail connexe.

Chaos Cloth pour l'Unreal Engine 5.7 comprend le développement continu d'un éditeur de vêtements en bêta. 

Parmi les mises à jour de l'UE 5.7 figurent :

• Intégration des données de vêtements de maillage squelettique :

  • Vous pouvez maintenant ajouter des ressources de vêtements et de tenues en tant que données de vêtements de maillage squelettique.

  • Les sections de rendu de maillage squelettique peuvent alors être déformées par la simulation de vêtements configurée au sein de ce graphique de flux de données de ressources, supprimant le besoin d'un composant de vêtements supplémentaire.

• Nouvelles options d'espace de référence :

  • Utilisez le nouveau nœud de flux de données ReferenceBone pour définir explicitement l'os de référence plutôt que d'utiliser celui calculé automatiquement.

  • Utilisez la nouvelle option d'espace d'amortissement local pour résoudre en espace d'os de référence (ReferenceBone) plutôt que d'utiliser le centre de masse.

• Optimisations : nous avons implémenté des optimisations pour le thread de jeu de vêtements et le tick interacteur.

• Maillages d'accessoires (expérimental) :

  • Nous avons ajouté des maillages d'accessoires et mis à jour la contrainte de dispositif de soutien pour pouvoir utiliser ce maillage d'accessoire.

  • Vous pouvez actuellement créer des maillages d'accessoires en convertissant une collection de maillage de simulation existante en maillage d'accessoire. Si des identifiants de vertex importés existent à la fois dans les collections source et cible, vous pouvez les utiliser pour faire correspondre les index de vertex réorganisés dans le cadre d'une importation SKM.

Chaos

Chaos Physics reçoit continuellement des mises à jour et des optimisations de manière à fournir aux graphistes, aux développeurs et aux programmeurs de meilleurs résultats de simulation. La dynamique des corps rigides est au cœur de la physique des jeux. À mesure que les mondes deviennent toujours plus vastes et riches en physique, il est essentiel de garantir que ce système central est capable d'évoluer pour répondre à ces cas d'utilisation. Tout comme la dynamique des corps rigides, les requêtes sont une technologie fondamentale utilisée par de nombreux systèmes dans l'Unreal Engine. Nous devons donc veiller à ce que leurs performances s'adaptent à des mondes dynamiques de très grande envergure.

Parmi les mises à jour de l'UE 5.7 figurent :

• Améliorations des performances de simulation :

  • Davantage d'étapes de simulation parallèles.

  • Nous avons ajouté la fonctionnalité de mise en veille partielle expérimentale pour améliorer les performances des grandes piles non structurées.

• Améliorations des performances des requêtes :

  • Améliorations de la phase étroite des sphères et des capsules.

  • Améliorations de la gestion de la transformation et de la modification d'échelle dans la couche de requête générale.

• Chaos Visual Debugger (CVD) :

  • Amélioration de la vitesse de chargement pour les scènes qui comptent un grand nombre d'acteurs et une géométrie complexe.

  • Modifications QoL et améliorations de la cohérence du débogueur d'exécution.

• Ressources physiques de flux de données :

  • Prise en charge initiale pour la création de ressources physiques via des graphiques de flux de données.

• Nombreuses modifications QoL et nombreux correctifs à travers l'ensemble des fonctionnalités de simulation.

Mise en cache Chaos

Dans l'Unreal Engine, le Chaos Cache est un système au sein du framework Chaos Destruction qui enregistre et réutilise des simulations de destruction complexes, ce qui améliore de façon significative les performances, tout en offrant des résultats cohérents et prévisibles pour des fonctionnalités comme les courts métrages. Vous gérez la mise en cache à l'aide d'un gestionnaire Chaos Cache qui enregistre les données physiques dans une ressource Collection Chaos Cache.

Ces données mises en cache peuvent ensuite être rejouées à l'exécution pour afficher la destruction sans recalculer l'intégralité de la simulation. Les scènes complexes gagnent ainsi en efficacité et sont moins exigeantes au niveau du matériel.

Parmi les mises à jour de l'UE 5.7 figurent :

• Prise en charge du maillage proxy racine de collection de géométrie : le cache Chaos prend maintenant correctement en charge les maillages proxy racines et bascule vers leur utilisation en fonction de l'état de destruction de la ressource de collection de géométrie en train d'être mise en cache et rejouée.

• Incrément automatique de ressources de cache : le gestionnaire Chaos Cache dispose maintenant d'une option pour créer automatiquement une nouvelle ressource à chaque début de nouvelle session d'enregistrement.

• Contrôles de démarrage et d'arrêt de session : vous pouvez désormais contrôler à quel moment la session de mise en cache commence et s'arrête. Par défaut, la session de cache démarre lorsque l'événement Lancer la lecture est déclenché pour l'acteur de cache (généralement au lancement de PIE ou de la simulation). Une option pour désactiver ce comportement est disponible. Elle nécessite que vous déclenchiez le début de la session avec les fonctions de début et de fin de Blueprint.

• Fonctions de composants observés : des fonctions Blueprint sont désormais disponibles pour ajouter, actualiser, supprimer ou réinitialiser des composants observés d'un ChaosActorManager spécifique.

• Correctifs de bogues majeurs :

  • Lorsque vous enregistrez deux fois une collection de géométrie mise en cache pendant la même session, les événements sont désormais toujours correctement enregistrés la deuxième fois.

  • Lorsque vous relisez un cache en mode jeu, l'interface de données Niagara pour Chaos Destruction déclenche désormais toujours les événements de trainée comme prévu.

Chaos Hair

L'initiative centrée sur la pilosité vise à créer un pipeline de simulation robuste pour un comportement réaliste des poils à l'aide de flux de données, de maillages squelettiques et de splines guides. Le système permet des simulations pilotées par l'animation, un mélange entre des mèches cinématiques et simulées et des fonctionnalités de création avancées, comme des déformateurs et des outils de peinture.

Les flux de travail procéduraux de ressources de pilosité bénéficient de la mise à jour de l'UE 5.7 pour l'amélioration générale de l'éditeur de flux de données. Nous avons amélioré les nœuds correspondants afin de proposer une configuration plus flexible :

• Nœuds sensibles à la sélection :

  • La plupart des nœuds acceptent à présent une sélection, ce qui permet une configuration plus contrôlée et plus ciblée.

  • Vous pouvez utiliser des nœuds de sélection existants pour d'autres ressources (Destruction, Flesh) afin de créer des ensembles de sélection et les manipuler de façon procédurale.

• Performances :

  • Les ressources de pilosité à géométrie complexe génèrent plus rapidement la géométrie du hublot de construction. Désormais, elles mettent aussi les informations en cache pour éviter d'avoir à les recalculer.

  • Cela s'applique aussi à d'autres nœuds basés sur les collections sur l'ensemble des éditeurs de flux de données.

Parmi les mises à jour de l'UE 5.7 figurent :

• La simulation des poils avec des splines guides pilotées par l'animation et la physique.

• Mélange entre les états animés et simulés pour plus de réalisme et de contrôle.

• Prise en charge de la peinture d'attributs, de la pondération de surfaçage et de la permutation de guides.

Chaos Fluids

Le projet Fluids continue d'étendre les capacités de simulation de l'eau de l'Unreal Engine, avec des efforts ciblés dans l'UE 5.7, destinés au plug-in Advanced Water (principalement des améliorations pour les simulations de cours d'eau précalculées).

Parmi les mises à jour de l'UE 5.7 figurent : 

• la prise en charge des textures virtuelles

• l'amélioration de la qualité de surface (moins d'artefacts en pics)

• diverses corrections de bogues et optimisations de performances.

Production virtuelle

Live Link - Aperçu des données

Vous pouvez désormais prévisualiser les données Live Link dans le hublot de l'éditeur sans avoir à préparer d'acteurs ou de maillages squelettiques. L'acteur Aperçu des données Live Link permet de visualiser toutes les données relatives à l'animation, à la transformation, à la caméra et au rôle de marqueur en un seul acteur.

Nous avons également fourni des composants d'acteur pour créer des outils d'éditeur personnalisés. Le Gestionnaire MoCap les utilise pour visualiser vos données Live Link.

Live Link Hub - Enregistrement robuste

Nous avons amélioré la robustesse de l'enregistrement dans Live Link Hub pour faire face aux changements de taille des données des sujets au fil du temps, par exemple lors de la perte du suivi d'un sujet puis de sa récupération au cours d'un enregistrement.

Vous pouvez mettre à niveau les enregistrements des versions précédentes au nouveau format en cliquant avec le bouton droit de la souris sur la liste des enregistrements.

Composant Live Link — Broadcast

Vous pouvez ajouter le nouveau composant Live Link Broadcast aux acteurs de votre niveau et les transformer en sujets Live Link à partir desquels d'autres machines du réseau local peuvent recevoir des animations. Le composant Broadcast prend en charge les rôles Transformation, Caméra et Animation.

Ce nouveau composant permet des flux de travail dans lesquels vous pouvez utiliser un projet Unreal Engine léger pour le reciblage du squelette, puis diffuser la pose de reciblage résultante à d'autres projets Unreal Editor sur le réseau, faisant de l'UE le logiciel de CCN de reciblage. La fréquence d'images de l'animation diffusée est égale à la fréquence d'images du thread de jeu.

Live Link - Flux de données avec possibilité de pause

Vous pouvez désormais mettre en pause et annuler la mise en pause des données des sujets Live Link dans le panneau Live Link et dans Live Link Hub. Vous pouvez mettre les sujets en pause individuellement ou par groupe.

Il existe également des fonctions de programmation Blueprint pour contrôler la mise en pause à partir de vos outils d'éditeur personnalisés. Le Gestionnaire MoCap utilise maintenant cette API pour contrôler la mise en pause des sujets.

Live Link Hub — Unreal Editor Device

Dans les prochaines versions, la fonctionnalité d'appareil d'enregistrement de Switchboard sera transférée vers Live Link Hub pour les configurations de capture de mouvement multi-utilisateurs. Pour l'UE 5.7, dans Live Link Hub, vous pouvez maintenant contrôler le slate et arrêter-démarrer le magnétophone sur les clients Unreal Editor connectés, en utilisant un nouveau plug-in expérimental appelé Live Link Unreal Device.

Cette nouvelle approche améliore la robustesse de l'enregistrement multiclients, en remplaçant l'ancien système de messages OSC utilisé par Switchboard, et fournit une autorité contrôlée par l'utilisateur sur ce que chaque client doit enregistrer et quels clients doivent être autorisés à enregistrer.

Gestionnaire MoCap - Dynamic Prop Attachment

Lors du reciblage de MoCap, il y a souvent des décalages entre les mains du performeur et celles de votre personnage MoCap. Cela pose un problème lorsqu'il s'agit d'aligner des accessoires suivis sur votre personnage.

Le nouveau composant Dynamic Prop Attachment vous permet de piloter un accessoire avec des données de capture de mouvement, mais d'ajouter un décalage dynamique pour qu'il reste dans les mains de votre personnage.

Le composant PCapProp dispose désormais d'une fonction remplaçable par Blueprint pour permettre aux utilisateurs d'écrire leur propre logique de jonction dynamique. Un exemple d'implémentation est fourni dans le gestionnaire MoCap et devrait fonctionner pour la majorité des accessoires à une main.

Gestionnaire MoCap - Amélioration de la création de maillage d'artiste

Pour obtenir le résultat de reciblage le plus précis possible, la modification de l'échelle d'un maillage squelettique selon les proportions des données Live Link de l'artiste est considérée comme la meilleure pratique.

Nous avons amélioré le flux de travail dans le gestionnaire MoCap pour la création de cette ressource afin de pouvoir travailler avec des scènes dont l'origine n'est pas correctement placée et pour les systèmes qui utilisent des systèmes de coordonnées droitiers.

Composure

L'Unreal Engine 5.7 réintroduit Composure en tant que système moderne pour la composition en temps réel, avec à la fois des entrées vidéo en direct et des plaques médias fichier/image. La nouvelle version de Composure est un outil basé sur les couches qui présente de nombreuses améliorations par rapport à l'ancienne version :

• Une expérience utilisateur repensée et un flux de travail rationalisé.

• L'intégration performante des ombres et des reflets pour les prises de vues réelles à l'aide de passes de rendu personnalisées.

• Un manipulateur amélioré.

Profil média

Historiquement, la gestion des entrées et sorties vidéo en direct dans l'Unreal Engine nécessitait plusieurs ressources (source média, lecteur multimédia, texture média, etc.) pour aller du point A au point B. Le profil média vise à consolider ces éléments en une ressource de configuration unique pour une configuration de machine donnée et à apporter de nombreuses améliorations au flux de travail, telles que :

• l'ajout dynamique de plusieurs sources et sorties médias et la sélection de l'option matérielle souhaitée (par exemple, AJA, Blackmagic, NDI).

• la prévisualisation simultanée de plusieurs flux d'E/S.

• la capture de la sortie média.

• la configuration du timecode et de genlock avec des retours immédiats.

• l'accès pratique à la fonctionnalité d'E/S vidéo dans des outils connexes, comme Composure, d'un simple clic.

Magnétophone - Protection contre les saccades (expérimentale)

L'UE 5.7 prend en charge la protection contre les saccades pendant l'enregistrement des prises. Vous pouvez désormais configurer le magnétophone pour qu'il dilate la vitesse d'enregistrement afin de se prémunir contre la perte de données. Si une image était autrement perdue, le magnétophone pourrait ajuster l'évaluation du moteur pour laisser le temps aux données d'être enregistrées avant de rattraper son retard.

• Enregistrez les données complètes de manière plus fiable.

• Visualisez les zones de préoccupation où l'intégrité des données pourrait être perdue.

• Prenez des décisions éclairées sur le moment concernant la qualité de vos enregistrements.

Jetons de nommage - Widget de texte modifiable

Nous avons ajouté un widget de texte modifiable pour les jetons de nommage Slate et UMG, qui prend directement en charge les jetons de nommage. Vous pouvez maintenant facilement créer des outils de pipeline prenant en charge les jetons de nommage. Lorsqu'elle fait l'objet d'une focalisation, la zone de texte affiche la chaîne {token} non évaluée. Lors de la validation, la zone de texte affiche le texte de résultat évalué.

• Recherchez et saisissez automatiquement {tokens} directement depuis la zone de texte.

• Visualisez immédiatement la valeur du jeton évalué dans la zone de texte.

Disponible avec le plug-in Naming Tokens.

Modèles de chronologie pour les schémas d'assemblage cinématique

Les schémas d'assemblage cinématique peuvent désormais référencer des séquences de niveaux et des assemblages cinématiques existants en tant que modèles pour la chronologie de Sequencer. Vous pouvez spécifier un modèle cible et faire en sorte que cette chronologie soit recréée chaque fois que vous créez un nouvel assemblage cinématique à l'aide du schéma.

• Concevez votre chronologie de base à l'avance.

• Réduisez les répétitions et les erreurs lors de la création de plans, de scènes, de séquences d'éclairage, etc.

Disponible avec le plug-in Cinematic Assembly Tools (CAT).

Dupliquer des assemblages avec remplacement de références

Vous pouvez maintenant dupliquer des assemblages vers un nouvel emplacement avec remplacement des références. Vous n'avez plus besoin de créer, de renommer et de reréférencer manuellement les sous-séquences lors de la duplication d'un assemblage.

• Dupliquez-les à un nouvel emplacement et renommez-les automatiquement en fonction des métadonnées et des jetons d'assemblage.

• Les sous-séquences sont dupliquées, renommées et reréférencées de manière procédurale pour s'assurer qu'aucune référence n'est oubliée et vos anciens plans modifiés.

• Accès facile depuis un assistant simple et épuré.

SMPTE 2110 : prise en charge Nvidia Rivermax BlueField-3

Le plug-in Nvidia Rivermax prend en charge les DPU BlueField-2 et BlueField-3 dans l'Unreal Engine 5.7, avec une fonctionnalité validée dans nDisplay pour les effets visuels intégrés à la caméra.

Mises à niveau de SDK de plateforme

• Windows

  • Visual Studio 2022 v17.14 ou ultérieure

  • Windows SDK 10.0.22621.0 ou ultérieur

  • LLVM Clang

    • Minimum : 18.1.8

    • Conseillé : 20.1.8

  • Intel OneAPI

    • Minimum : 2025.2.0

    • Conseillé : 2025.2.0

  • .NET 8.0

• Version d'EDI par rapport à laquelle la batterie de builds compile

  • Chaîne d'outils Visual Studio 2022 17.14 14.44.35207 et SDK Windows 10 (10.0.22621.0)

  • Xcode 15.4

• GDK

  • SDK Windows minimum : 10.0.22000.0

  • GDK : avril 2025

  • Dernière version de récupération

  • IDE pris en charge : Visual Studio 2022

• Linux

  • Développement Linux natif

  • Système d'exploitation recommandé : Ubuntu 22.04, Rocky Linux 8 ou ultérieur, Redhat Linux 8 ou ultérieur

  • Compilateur : clang 20.1.8

  • Chaîne d'outils de compilation croisée : basée sur v26 clang-20.1.8

  • Remarque : les utilisateurs de l'Unreal Engine sous Linux doivent mettre à jour leur système d'exploitation pour utiliser SDL3. Pour en savoir plus, consultez la page Mettre à jour l'Unreal Engine sur Linux pour SDL3

• macOS

  • Système d'exploitation recommandé : dernier macOS Sonoma 14

  • Système d'exploitation minimum : macOS Sonoma 14.0

  • Xcode recommandé : 15.4 ou ultérieur

  • Xcode minimum : 15.2

  • SDK macOS pris en charge : 14 et ultérieur

  • Remarque : les versions Xcode prises en charge ont été rétrogradées depuis la version 5.6 de l'UE en raison de certains problèmes de compilation et de liaison lors de l'utilisation des dernières versions.

• iOS / tvOS / iPadOS / visionOS

  • Système d'exploitation recommande : dernier macOS 14 Sonoma

  • Système d'exploitation minimum : macOS Sonoma 14.5

  • Xcode recommandé : 16.1 ou ultérieur

  • Xcode minimum : 15.4

  • Versions de SDK cibles prises en charge :

  • iOS SDK version 15 ou ultérieure

  • iPadOS SDK version 15 ou ultérieure

  • tvOS SDK version 15 ou ultérieure

  • visionOS 2.4 avec Xcode 16.3 recommandé

    • Remarque : les versions v2.5 et x16.4 ont passé un test très limité et sont probablement bonnes. Les versions jusqu'à v2 et x16 fonctionnent probablement.

  • API iOS Graphics : Metal 2.4 - 3.1

  • Autres notes

    • Shader Model 6 (SM6) nécessite macOS 15. Cette prise en charge est en bêta, et nous ne la recommandons actuellement pas pour la production.

• Android

  • Android Studio Koala 2024.1.2 29 août 2024

  • Android NDK r27c

  • Android SDK

    • Recommandé : SDK 34

    • Minimum pour compiler l'UE : SDK 34

    • SDK cible par défaut pour le shipping : SDK 34

    • Niveau SDK d'installation minimum : SDK 26

    • AGDE v23.2.91+ est recommandé si vous utilisez le débogage AGDE, cette version contenant un correctif pour une erreur SIGBUS.

  • Outils de build : 34.0.0

    • Vous rencontrerez peut-être des problèmes si vous tentez d'utiliser la version 35.0.0 et aidl sous Windows. Ce n'est pas le cas avec la version 35.0.1.

  • Exécution Java :

    • OpenJDK 21.0.3 2024-04-16

    • Environnement d'exécution OpenJDK (build 21.0.3+-12282718-b509.11)

    • OpenJDK 64-Bit Server VM (build 21.0.3+-12282718-b509.11, mode mixte)

  • Autres notes

    • L'UE a été mis à niveau de manière à utiliser Gradle 8.7, et la version d'Android Gradle Plugin (AGP) que nous utilisons a été mise à jour à la version 8.5.2. Si vous utilisez Android Studio pour le débogage, nous vous recommandons d'utiliser Android Studio Koala. Ladybug fonctionne également, mais ne met pas à jour Gradle ni AGP à partir des versions ci-dessus.

    • Au moment de choisir votre niveau NDK, vous devriez viser android-26, qui prend en charge Android 8.0+.

• EOS

  • 1.18.1.2-47370208

• Steam

  • 1.57

• Nintendo Switch

  • Version SDK par défaut : 20.5.6

  • Version firmware par défaut : 20.1.0-2.2

  • Version SDK minimum : 18.3.1

  • Version firmware minimum : 18.1.0-1.0

  • Nintendo Package Manager : 1.7.0

  • IDE pris en charge : Visual Studio 2022

• Nintendo Switch 2

  • Version SDK par défaut : 20.5.6

  • Version firmware par défaut : 20.1.0-2.2

  • Version SDK minimum : 19.3.5

  • Version firmware minimum : 19.1.0-1.4

  • Nintendo Package Manager : 1.7.0

  • IDE pris en charge : Visual Studio 2022

• PS4

  • Orbis SDK 12.508.001 par défaut

  • Orbis SDK 12.008.011 minimum

  • Logiciel système 12.508.001

  • IDE pris en charge : Visual Studio 2022

• PS5

  • SDK Prospero SDK 11.00.00.40 par défaut

  • SDK Prospero SDK 10.00.00.48 minimum

  • Logiciel système 11.00.00.43

  • IDE pris en charge : Visual Studio 2022

• ARCore

  • 1.48

• ARKit

  • 4,0

• OpenXR

  • 1.1.46

  • Les exécutions OpenXR 1.0 et 1.1 sont prises en charge, l'une ou l'autre pouvant être désactivée dans les paramètres du projet.

Notes de version

AI/ML

Neural Network Engine (NNE)

New:

• Added multi-task support to the IREE CPU backed NNE runtime.

• Upgraded IREE to version 3.5.0. for NNE plugin NNERuntimeIREE.

Animation

Animating in Engine

New:

• Added a 'Tolerance' To the ControlRigPoseMirrorSettings Project settings that is used to match Controls also by position in rest pose. We still match by the Mirror table first, and fallback to position based matching. We also now cache the tables and reset them if a mirror table property is changed.

• Improved Anim Details

  • UX Editing multiple values no longer displays the first property value.

  • Releasing focus on multiple values no longer sets the first property value.

  • Shift clicking to the left of a property name no longer resets the property.

  • Added support for math expressions with multiple operators.

  • Removed support for =operator syntax, instead use operator =, e.g *=3 to multiply the current value by 3.

  • No longer show parent controls of the current selection, avoiding showing too many channels when a selected control has hosted channels.

  • Now follows the same order as Sequencer for non Control Rig properties

  • Now uses meta data of Control Rig elements and Object Properties that sequencer controls, value ranges are now displayed and respected.

  • Selected Anim Details properties now navigate to their value widget when pressing tab.

• Animator Kit:

  • Added a new Locator utility rig.

  • Adding static mesh locators and materials.

• Curve Editor:

  • The Set Start Playback Range and Set End Playback Range shortcuts now work in the Curve Editor as well as Sequencer.

  • A new preference, Panning Mouse Button, allows you to choose whether right or alt-middle mouse button, or both should be used for panning the curve editor view. Also, alt-right now always zooms in/out.

  • The Next Key and Previous Key shortcuts now work in the Curve Editor as well as Sequencer.

• Ensured we load an animation instead of trying to just find the package before we "Bake To Animation" so that it doesn't try to create a new asset.

  • Updated AnimationEditorUtils.cpp

Bug Fix:

• Deleting a Bool channel can no longer set the key at another time if AutoKey and KeyAll is on.

• No longer adds anim layers to level sequence unless needed.

• Constraints now work with Pivot Tool.

• Fixed shift click so it always goes to the last selected object, added a hot key to toggle pivot and motion trail modes.

• Made sure to automate tangents when baking.

• Made motion trails enter/exiting undo/redoable.

• Motion trails can be selected without a focused viewport.

• Made sure Rotator/Location/Scale controls have a curve color

• Pose library can paste onto hidden control rigs

• Made the AnimSequencerExport Blueprint type

• Anim Details:

  • Properties now reset their values to the initial value of controls when clicking reset to default.

  • Now also displays properties that reside within a Shot Track.

  • Fixed navigation not working in some cases.

  • Fixed an issue in Anim Details where selecting a component in a plain location, rotation or scale control would not select the control in Curve Editor.

  • No longer shows objects if keys are selected only.

  • Fixed property value widgets are losing focus while scrubbing if a blueprint actor is controlled.

  • Fixed in some cases editing Anim Details properties creates more than one undo step.

  • Fixed Anim Details options no longer showing when reentering animation mode

  • Fixed an issue where Anim Details displayed the actor or component name instead of the track name for attributes.

• Curve Editor:

  • Fixed issues where bezier curves were not always painted correctly.

  • Fixed an issue where curves were not painted when none of its keys were visible.

  • Fixed an issue where linear pre-/post-infinity extrapolation was not always painted correctly

  • Baking keys with a value different than 1 would increase range

  • Fixed an issue where pre-/post-infinity was not painted correctly when the first or last key's tangent mode was linear and pre-/post-infinity interpolation was linear

  • Fix an issue where curves flicker hovered and unhovered while editing

• Motion Trails:

  • Made sure the Motion trail state stays on with asset reload.

  • Fixed strobing frame coloring with dashed by setting the start frame to be eval range start so it doesn't change when view range changes.

  • Fixed crash when drawing HUD since trail may not be updated due to how the hud draws. Clean pin state in UI when using modifiers.

• Fixed an issue where changing additive animation modes with root motion on causes inconsistent root position when going from an additive mode to none.

• Fixed a bug where starting an animation with a non-zero playback time (like rewind debugger can do) would cause an incorrect root position.

• When merging sections no longer see if it's in range, just extend it so we can match up how it works without the merge.

• Now only compensate from the game thread.

• Can now set or add keys when recording control rig keys, previously we would just add keys causing duplicates.

• Anim Layers:

  • Bake Fix for absolute with additives when doing per frame bakes.

  • Make Name Column not shrink when shrinking

  • Layers show up when added to sub sequence

  • Keep track of open anim layer UI on the anim layer asset data.

  • Fixed duplicate/merging control rig sections when the channel layout is different between sections.

• Made generic vector channel data display more robust for position/rotation/scale control types. This also fixes the euler curve filter not recognizing rotation keys coming from Rotator control types.

• Sequencer: When baking to control rig, the animation track is now disabled instead of the individual sections.

• Turn off throttle when mouse button is pressed not just on drag so scrub time doesn't throttle in sequencer/curve editor

• Space Switching: Remove extra keys when clicking a space key by checking to see if we are changing into the same space in which case we can delete the extra key and the space key

• Hosted channels are no longer enabled if the parent is not enabled, this breaks selection. Also fixed anim layer selection with static meshes

• Sequencer: The scrub shortcut (b) now properly works in the viewport, Sequencer and Curve Editor.

• Fix Pivot square scale in different FOV's.

• Force LOD to 1 when ticking skel meshes when baking anim sequences. Sequencer may restore state which can change the lod during the bake process.

• Pivot Tool: Pivot render works in different FOVs

• Animation Kit:

  • Added aim option for blendParent. Changed control shapes to not be solid.

  • Fixing bad root attachment when no control rig exists.

  • Fixed an issue with the recompute mesh normals kernel used by Deformer Rigs in the Animator Kit plugin causing unexpected changes to mesh normals even if they are not influenced by deformer.

• Can no longer do space compensation from nongame thread which can happen when deleting many channels, in which case we probably don't want to compensate anyway

• Pose Library fixes, use alt drag for non additive drags and for additive it goes from -1 to 2.

  • Blending and additive mode are now working on mirror.

• Space Switching: Fix for undoing space switch key deletion.

• Tools such as snapper, trails and baking now work better with spawnables in nested subsequences

Character Customization (Mutable)

New:

• Added component naming support for spawned groom components.

• Debugger improvements:

  • Added support for Dataless parameters.

  • Unified Debugger and Editor compilation options.

  • Reordered some widgets for better use of the available space.

• Minor API improvements:

  • Actor:

    • Added ACustomizableSkeletalMeshActor::GetCustomizableObjectInstance.

    • Added ACustomizableSkeletalMeshActor::GetSkeletalMeshComponent.

  • Override Materials

    • Deprecated UCustomizableObjectInstance::GetOverrideMaterials(int32).

    • Added UCustomizableObjectInstance::GetSkeletalMeshComponentOverrideMaterials(FName).

• Restricted Passthrough Mesh Component to only support Skeletal Meshes.

Bug Fix:

• Fixed Material Parameter assert.

• Fixed Default Values not exposed to Blueprint.

• Fixed Skeletal Mesh Parameter morph check.

• Fixed UpdateSkeletalMeshAsync missing parameters.

• Fixed Materials comparison for merging.

• Fixed Textures and Meshes not being properly cached, their hash was not deterministic.

• Fixed a compiled API typo.

• Fixed multiple Dataless bugs:

  • Crash with Default Material parameter.

  • Crash with Dataless Morphs having names but no data.

  • Fix Texture Parameter not cropping images with layout operations.

• Fixed issues with GenerateMutableSourceImage cache.

• Added missing COI Contains API functions.

• Fixed public API Enum Parameter functions not working with the first parameter.

  • GetEnumParameterNumValues

  • GetEnumParameterValue

• Fixed deadlock when saving an asset + compiling a CO while asset registry was loading.

• Fixed streaming crash when no indices.

• Fixed meshes incorrectly reusing poses.

Deprecated:

• Removed deprecated 5.6 API functions.

Control Rig

New:

• Update default hotkeys and related functionality:

  • Set Solve Mode: Construction Event - 1

  • Set Solve Mode: Forwards Solve - 2

  • Set Solve Mode: Backwards Solve - 3

  • Set Solve Mode: Backwards and Forwards - 4

  • Set Next Solve Mode - M

  • Enable profiling- P

  • Show Controls as Overlay - U

  • Display Nulls - G

  • Display Socket - H

  • Display Axes for selection - J

  • Using hotkey for Profiling (P by default) now creates an undo step.

• Function nodes from other assets now show the asset name instead of the asset path.

• Flagged Render MorphTarget MaxBlendWeight CVar as safe for render thread, in order to avoid some warning logs.

• Made the animation show flags of the control rig editor never clip off of the viewport toolbar.

• Fixed duplicated Control Rig assets not resetting the asset variant ID.

• Control Rig Hierarchy no longer reserves transform space for non transform elements (curves and connectors).

• Control Rig Physics

  • Moved to its own experimental plugin, though it still requires the Physics Control plugin as well.

  • Added ability to import collision shapes and bones

  • Support for "wind turbulence"

  • Support for colliding against world objects

  • Add various cvars under controlrig.physics

  • Numerous improvements, especially access to functionality, and fixes

• Removed top level component concept from Control Rig Hierarchy

• Added GetSocketTransform

• Modular Control Rig:

  • Adding plugin Icon for Modules

  • Improved backwards solve for Foot Module.

  • Added Module tags and Root56 module to the correct ini files.

• Dragging a rig element onto the graph now offers an option to Get Metadata and Set Metadata.

• Update default settings and remember them per editor per user:

  • Display Axes On Selection is now enabled by default.

  • Display Axes On Selection, Axis Scale, Display Nulls, Display Sockets, Gizmo Scale, Hide Control Shapes, Show Controls as Overlays, Only Select Rig Controls are now saved per editor per user.

• Control Rig now only performs one copy of the hierarchy during initialization.

• Added line trace unit nodes.

• Added icon to plugin.

• Added Damp and Critical Spring Damp nodes to Control Rig.

• The Control Rig menu now shows directly in the viewport toolbar instead of being a submenu in the Show menu (eyeball icon).

• Nodes and hierarchy elements now offers options to find nodes by name locally and globally.

• Updates to Set Initial Transform from Current and related Commands

  • Set Initial Transform from Current is now only applicable for Bones, Nulls and Connectors.

  • For Controls, Set Initial Transform from Current is now Zero Controls.

  • For Controls, Set Initial Transform from Closest Bone is now Zero Controls from Closest Bone, and no longer applicable for Bones, Nulls and Connectors.

  • Set Shape Transform from Current is now Zero Control Shape.

Bug Fix:

• Moved findItemsWithTag to the construction event for performance.

• Fixed Control Rig curve container undo / redo breaking the curve list

• Fixed Control Rig editor resetting on compile curve operations made on the curve container (delete, rename, and import).

• Fixed a crash in Control Rig Pose adapter when removing bones from the skeleton while having a Blueprint with a Control rig opened in the asset editor.

• Fixed AnimNode Control Rig variable mappings initialization at OnInitializeAnimInstance.

• Control Rig: Need to update Rotation Order table with modular rig updated names.

• Fixed Control Rig Hierarchy updating more transforms than needed in propagate dirty flags function.

• Modular Control Rig

  • Added twist to legs.

  • Fixed IK/FK naming.

  • Added back public function from arm to leg so it picks up changes.

  • Fixed hind legs ik fk.

  • Changed leg and arm softness to off by default.

  • Fixed socket tooltip in Spine.

  • Fixed HindLeg FK controls not rotating.

  • Fixed AnimalNeck stretch.

  • Fixed Shoulder backwards solve by parenting to chest null instead of body ctrl.

  • Fixed HindLeg to always use connectors for creation instead of parent lookup.

• The editor now retains the Rig Solve Mode after compiling.

• Fixed Control Rig control module iterator lambda parameters creating copies of some expensive objects.

• Fix for client crash in FRigUnit_HierarchyInstantiateFromPhysicsAsset, due to Modular Control Rig object overrides getting garbage collected.

• Fixed ControlRig Hierarchy serialization not storing the previous hierarchy name map.

• Fixed crash in Control Rig editor when the preview floor mesh is not available, now it will trigger an error log and continue to load the asset.

• Avoid a crash in Control Rig when adding an empty rule to a connector.

• Fixed an editor undo redo in an AnimBPs that contains a Control Rigcrash, when performing a redo of a previously-undone SetPreviewMesh transaction.

• Anim In Engine: Rotator control keys are retained in Sequencer when the controls are changed to transform controls in the rig.

• Need to update Constraint Channels with updated Modular rig names, or constraints come in broken.

• Fixed ControlRig editor not executing post undo for the transient editor preview actor.

• Fixed undo / redo crash in Control Rig hierarchy mappings, when undoing across a construction transaction.

• Converted HandleExecutionReachedExit event to function callback, to avoid worker thread contention.

• Fixed ControlRig spawn control node details panel not generating the shape name list as a combo box.

• Fixed a crash in ControlRig when expanding a function reference from a different graph that contains a private function inside. Now the user will receive a localize request to make a local copy of the function.

• Fixed RigVM local variable customization not showing value for local variables not used in the graph and losing value after compiling.

Deformer Graph

New:

• Adding Deformer dynamically in Control Rig was changed to use Async Loading to avoid hitches when the Deformer loads.

• Enabled Compute Framework/Deformer Graph on mobile platforms.

• Fixed SkinWeightAsVertexMask Date Interface providing incorrect data when a non-default skin weight profile is used.

• Fixed skeletal meshes getting invalid tangents when using deformer graph with opengl_es31.

• Fixed wrong category for a few deformer functions.

• Added a pre-built dual quat deformer that supports both morph and cloth.

Bug Fix:

• Made sure skin weight profiles are requested earlier so that we can avoid T-Pose on the frame that the deformer becomes active / LOD changes.

• Fixed copy pasting resource node with matrix3x4 type creating a node with no pin.

• Fixed an ensure related to deformer graph instance settings in packaged build caused by incorrect object name used when creating the settings object.

Gameplay

New:

• Make Motion Warping switchoff conditions and warp target direction mode experimental as these APIs will change in future.

• Added support for animation mirroring to UAF.

  • Note this is a first pass and not fully matching Animation Blueprint's capabilities yet.

• Added a new version of AddAnimationNotifyEvent() that supports blueprint exposed data from notify events.

  • This helps prevent data loss when copying/duplicating animation notify events.

• Add SmoothWalkingMode to Mover2.0

  • Added base class SimpleWalkingMode to help make writing walking modes easier.

  • Renamed AnimationMath -> SpringMath and made public Rename SpringWalkingMode -> SimpleSpringWalkingMode.

  • Added Velocity Spring functions to SpringMath Add character prediction functions to SpringMath.

  • Added documentation to SpringMath.

• Added support for PoseSearchDatabase searches returning multiple results

• Added experimental support to the motion matching node (FAnimNode_MotionMatching) for interaction searches (multi character motion matching, to mimic FMotionMatchingTrait).

• Added a custom make bp function for FMotionWarpingTarget to ensure that the custom actor is called to calculate the target transforms when a component is passed as an input.

• The ChooserTable randomization column can now keep track of multiple recently selected entries and reduce the probability of reselecting them.

• Added new Chooser table column type (FPoseSearchColumn) to support motion matching searches within chooser evaluations.

• Add a spring walking movement mode to Mover named "SimpleSpringWalkingMode". This uses a critically damped velocity spring model to translate and rotate the character.

• Removed UE 5.5 deprecations from PoseSearch plugin.

• Exposed anim to texture editor functions as a public interface.

• Add threadsafe method for getting curve asset float & vector values.

Bug Fix:

• Fixed UE::PoseSearch::SDatabaseAssetListItem potentially referencing a deleted asset.

• Fixed a crash when opening the PoseSearchInteractionAsset editor.

• Fixed FSearchContext::GetSampleRotationInternal and FAssetIndexer::GetSampleRotation not properly calculating the rotation relative to their reference bone.

• Fixed motion matching tracing during throttled or skipped searches.

• Stored FBlendStackAnimPlayer::StoredAttributes as FMeshAttributeContainer instead of FHeapAttributeContainer to support animation LOD changes in blend stack.

• Fixed a pose search database indexing crash when using a UAnimNotifyState_PoseSearchSamplingAttribute referencing a bone that is missing from any channel included in the pose search schema.

• Fixed root motion sampling in blend stack.

• Fixed the motion warping switchoff condition to use the correct target transform when component following ends.

• Fixed a crash in UPoseSearchFeatureChannel_Phase::IndexAsset when indexing assets with a single pose, usually caused by a very short animation in a pose search database.

• Fixed UPoseSearchDatabase::SynchronizeWithExternalDependencies mistakenly synchronizing transient assets into a database, leading to reference garbage collected assets.

• Removed notify guids from Pose Search Database hash generation, otherwise the hash can be non-deterministic.

• Fixed a crash in FAsyncPoseSearchDatabasesManagement::CollectDatabasesToSynchronize with Objects with invalid Object->GetClass().

• Fixed the Alias state nodes not working with getters like GetRelevantAnimTime.

Deprecated:

• Deprecated UPoseSearchDatabase TArray AnimationAssets in favor of TArray DatabaseAnimationAssets.

• Deprecated UPoseSearchLibrary::UpdateMotionMatchingState.

ML Deformer

New:

• Hide certain conflicting properties (categories even) from the advanced preview scene settings tab. This was needed because the MLD asset editor has its own mesh picking and animation playback. Changing those properties inside the preview settings tab would mess things up. So we now hide those specific conflicting settings.

• Make curves work with UAF.

• Added support for copy paste between input bone and curve lists.

  • Means users can copy/paste the input lists from one model to the other.

  • You can now right click the input list widgets and choose Copy and Paste.

  • Fixed a few bugs in the tooltips as well as unique curve group name generation.

  • Improved the UX a bit by setting a minimum height for the bone, curve, bone group and curve group widgets and some context menu improvements.

  • Fixed some UI refresh issues as well when adding bones or curves. Curve group and bone group coloring did not refresh properly.

• Improved performance of the asset editor. Improved responsiveness to property changes, faster loading, faster sampling of anims.

• Added a new console command "MLDeformer.DebugDrawInputPoses" which will draw the input pose to the ML Deformer. It can be useful to quickly visually see what meshes have ML Deformers on them, and what bones are included.

• GeomCache: Some improvements to the memory management. Prevented reallocs, resulting in faster performance.

Bug Fix:

• Fixed a problem where training with curves would cause a failure during training.

• Fixed a bug where curves on the skeletal mesh instead of on the skeleton would cause some error checking to fail.

• Fixed a crash when adding a bone to the inputs of the ML Deformer.

• Fixed a crash on undo on morph based models. Also changed the icon of the Train button.

• Fixed python errors when launching with "-game" as argument.

• Fixed a bug when training, related to masks of input animations. Training would fail with some error right after sampling.

• Moved the tick group from pre physics to post physics.

• Fixed a VertexDeltaModel python import error. This was because an import should have been inside the Train function, but it was in global scope.

• Fixed async loading issues.

• Some fixes where it would not detect curves.

Physics Control

New:

• Now supports using a mask when invoking control profiles, which means they can be applied to a subset of the character.

• Additional support for specifying control/modifier set names in function calls.

• Kinematic targets are now specified the same way across PhysicsControlComponent, RigidBodyWIthControl and ControlRigPhysics.

• Fixed duplication of the Linear/AngularTargetVelocityMultiplier and TargetVelocityMultiplier parameters.

Bug Fix:

• General minor fixes/improvements to the physics control asset editor, including a fix for a potential crash.

Runtime

New:

• Added pinning and toolbar to workspace viewport and remove scene description tab.

• Now supports drag/dropping multiple bones in the abstract skeleton binding editor.

• Bone items can now be dropped onto non-set items in the abstract skeleton set binding editor.

• Added a filter for attributes to anim asset browser.

• Added Initialize as a default implemented event in the UAF module.

• State Machine: Self transitions & UX improvements:

  • Self transitions and state re-entry are now possible.

  • Re-entering a state uses inertial blending and requires an inertialization node. Old content will not use the new re-entry feature but any newly built content, when re-entering a state, will create an error if an inertialization node is not present root-wards in the graph.

  • The target state must enable bAlwaysResetOnEntry for the inertial blend to trigger.

    • To aid with managing state-reentry, a new MinTimeBeforeReentry value has been added to transitions.

  • Added 'reverse transition' context menu option that just reverses the direction of transitions.

  • Relinking transitions to other states can now be performed from the transition tail as well as the head.

  • State alias list is now sorted alphabetically to make finding states easier.

  • Look and feel of state machines has been tweaked & improved.

    • Now uses SVG brushes to better scale.

    • Different node types (states, aliases and conduits) now have different shapes.

  • Transitions now rotate to follow their direction and have been moved closer together and closer to their link line.

  • Transitions now sort in front of states.

  • Links are now further apart and scale correctly with zoom level.

  • Selection of links now scales correctly with zoom level.

  • Details panels for states now show the anim node functions for their result node and have been rearranged.

  • Added 'force transition' option to the context menu for state machines that are currently being debugged.

  • Made machine entry nodes non-deletable.

• Extended the Create Asset menu to allow non-asset menu entries for wizards that create potentially multiple assets of various types.

• Added a picker widget for animation attributes.

• Added toggle to blend layer trait to blend in mesh space.

• Added live updating blend mask weights in the profile blend node.

• Updated animation blueprint interface icon in the 'My Blueprint' tab to show as blue when the function has been implemented.

• Exposed Curve Metadata API on the Skeleton to Blueprint and Python. This includes functions to query, add, remove and rename curve metadata as well as querying and setting material and morph target flags.

• Disabled adding set bindings without a set collection set.

• Added a viewport to the workspace for UAF.

• Paused preview animation while manipulating transform widget in animation editor.

• Added an asset wizard for help authoring UAF content.

• Added foundations for the abstract skeleton runtime.

• Added editors for the abstract skeleton assets.

• Added functionality to Open in New Tab via the context menu for collapsed nodes and function nodes in UAF

• Fixed collapsed nodes and functions in UAF workspaces being opened without context of their outer, leading to loss of access to variables.

• Fixed debug only assert when opening items via double click the workspace outliner.

Bug Fix:

• Fixed a missing drag-drop op for adding attributes to sets in the set collection editor.

• Caught a situation where the mesh asset in InitializeAnimScriptInstance is invalid. Also dealt with possible parallel anim eval tasks being in flight.

• Fixed a crash when trying to create a new UAF Workspace instead of picking an existing one when prompted to choose a workspace after opening a newly created UAF Graph.

• Fixed slow document navigation in the workspace editor.

• Fixed a crash when attempting to add an existing curve attribute to abstract skeleton binding.

• Fixed being able to rearrange a trait onto itself.

• Fixed for animation modifiers not reverting correctly and crashing in some instances.

• Fixed a crash when re-removing a pin on a blend multi node after undoing.

• Fixed a broken root motion extraction during animation modifier evaluation.

• Fixed a regression in root motion extraction which prevented animation modifiers from reading raw uncompressed data during the compilation process, causing them to fail

• Fixed missing text localization in pose asset widget.

• SkeletonCompatibility: Fixed a problem when using compatible skeletons where we could end in a situation where the source skeleton did not have a bone of the target skeleton, which could lead to a crash.

• RBAN: Ensure RBAN doesn't write NaNs into the pose.

• Fixed visualization of what the blend weight of the animation is in Animation Insights for Random Sequence Player. Now it takes the overall blendweight of the animation into account as well.

• Fixed the look at edit mode locator gizmo not updating location when changes are made in the details panel

• Anim State Machine:

  • Fixed incorrect duplicate GUID warning when a transition rule is shared.

  • Prevented renaming states to 'None'.

  • Fixed copy-paste of transition nodes creating duplicate GUIDs/assets.

  • Fixed clamping values preventing manual entering of valid negatives.

• Anim Sequence: Fixed thumbnail scene references preventing deletion when assets contain notify states.

• Anim Assets: Fixed a crash when creating a preview scene for assets with a deleted compatible skeleton.

• Fixed the animation sequence segment length

• Fixed a button in the montage editor not working due to property access type mismatch

• SkeletalMeshComponent: Fix meshes getting ticked offscreen incorrectly when using montage-related visibility options

• Fixed pose history and trajectory history desync by delta time, causing incorrect results especially noticeable when the component transform makes large translation and rotation, e.g. a 180 pivot.

  • This fixes a bug with bad pivot selection when the capsule rotation flips

• Fixed incorrect timings on trajectory history when delta time is not constant.

• Fixed duplicate trajectory entries around t = deltatime.

• Fixed the set collection editor not updating when renaming a set, and added rename to the context menu.

• Fixed the expansion state of tree items resetting when drag/dropping a bone in the abstract skeleton binding editor.

• Fixed drag-dropping segments into composite track not matching selection order.

• Fixed window scaling issue when dragging multiple notifies in the animation editor.

• Changed check to ensure in SkeletalMeshComponent to avoid crash using rewind debugger.

• Fixed many SAssetShortcuts unnecessarily refreshing on asset opening resulting in slow ABP navigating.

• Animation Budget Allocator: Enabled component tick when unregistering.

• Updated the animation attribute functions to not allow adding an attribute with a name that already exists.

• Anim BP: Fix cook non-determinism with generated 'mutables' struct

• Anim Instance: Fix memory leak when GC-ing both mesh & anim instance in the same pass.

• Fixed an issue with tooltip names in SOverrideStatusWidgets.

• AnimSequence: Fix uninitialized pose transforms being generated in some circumstances

• PropertyAccess: Fix memory leak when calling functions via property access that return non-POD values.

• Anim Decompression: Removed usage of deprecated GetCompactPoseIndexFromSkeletonIndex.

• Fixed copying notifies when duplicating an anim sequence so the new notifies no longer reference the old sequence.

• Fixed the UAF asset wizard template assets being visible in the content browser and selectable in the workspace picker etc.

• Added more inline crash details when invalid values are found in animation poses.

• PropertyAccess: Hardened GetAccessAddress in case of unexpected data.

• SkeletalMeshComponent: Fixed a crash when calling SetAnimInstanceClass during a notify callback.

• Triggered caching of all otherwise lazily computed data when a DNA is loaded from a binary stream, which can avoid potential race conditions if the same DNA reader is utilized in a multithreaded environment.

• Fixed not being able to move nodes within newly created comment nodes in Control Rig and UAF.

Deprecated:

• Removed deprecated Skeleton Compatibility code from the Skeleton class.

• Removed deprecated Curve code from the Skeleton class.

• Removed deprecated Mesh Linkup Caching code from the Skeleton class.

Sequencer

New:

• Property tracks can now be renamed.

  • Note, the tooltip will still show the actual name of the property being animated.

• Added setting to always stop when going to playback start or end.

• Sequencer Navigator: There are now columns for the sequence ID and the object binding ID which are useful for debugging purposes.

• Take Recorder: Add a cvar TakeRecorder.AllowPossessablePIEObjects to bypass disallowing recording PIE objects as possessables. The default is to not allow this (no change in behavior). This can be useful when recording a player pawn.

• Added scripting to text

• Added ISequenceVisitor callbacks for when the visit enters/exists a sub-sequence

• The camera cut track now supports multiple rows. When multiple rows exist, the camera cut track does not try to auto arrange sections.

• MovieScene: Exposed FLevelSequencePlaybackContext to other modules.

• Hot key scrubbing will continue playing if Sequencer was playing.

• Preview camera cuts in simulate. This also lets users enable/disable seeing camera cuts in PIE after ejecting from the player controller.

• The colors for the playback start/end range can now be customized by user settings.

• Added support for notification callbacks when animating properties.

• The timeline in the cinematic viewport now respects the snapping behaviors of the Sequencer timeline.

• Added fixes and improvements to the time space display. The desired time space and the local time space are now both drawn.

• Bake Transform now has an option to bake with time warp applied.

• Attach sections with Preserve None now default to infinite duration.

• 'Bake Animation Sequence' and 'Create Linked Animation Sequence' actions in Sequencer now remember the last folder that was used in the current Editor run.

• Bake Transform is now available in the Template Sequence and Camera Animation Sequence Editors

• The subsequence section's Origin Override Location/Rotation now respect the default float/double spinbox incremental behaviors.

• Sequences: Add PlayReverse function to actor sequence components.

• Editing scale channels in the Sequencer Key Details now has an option to preserve the scale ratio

• Save As is now available in the Template Sequence and Camera Animation Sequence Editors.

• Added the ability to get and set Mute Nodes, Solo Nodes, Deactivated Nodes, Locked Nodes, Pinned Nodes, and Binding Tags in Blueprints/python.

• The view and working ranges are no longer saved with the asset. Every time you open a level sequence, it will be zoomed to the playback range.

• Duplicate keys are now removed on mouse release

• Update tooltip to "The interpolation type for the initial keyframe" to clarify that this is only for the first keyframe on the track/section

• UE_API all blueprint exposed functions for Sequencer Scripting

Bug Fix:

• Refactored track instance bindings and added the concept of "volatile" paths to fix possible memory stomps when animating array items or instanced structs.

• Fixed an issue where when changing shots we could sometimes get one frame of t-pose on a character when using bForceCustomMode. The issue was that we were checking for custom mode too late in the frame relative to when we were potentially doing the binding to a custom anim instance.

• Fixed the color not reverting when pressing cancel on the color picker.

• Added an adjustment for an issue for capturing thumbnails for sequences. Renders at a square aspect ratio and cleans up some advanced rendering features to create the cleanest image possible like materials.

• When opening a sequence, the playback mode is now set to loop selection range if a selection range is set.

• Fixed the BakeToControlRig function. Now fetches the templateID for the sequence that we're in so that if the sequence we are working on is a nested, instance, or template sequence we can resolve objects within the function.

• Added support for indirect gizmo manipulation of sub track offsets.

• Added support for animating property bag properties.

• Fixed a possible GC leak with UMG animations. It happened when using an event track, and the widget is removed from its parent while the animation is playing, and then the inactive widgets pool is discarded and GC'ed.

• Sequencer Navigator: The marks column now properly updates when marks are changed/added/removed.

• Exporting a binding that doesn't have a valid spawnable template no longer crashes

• Fixed a GC error in restore state of skeletal mesh animation track.

• Properly implemented end-at-time feature.

• Now stores camera shake previewers as shared pointers because FGCObject classes are not relocatable.

• Fixed Material Parameter Collection track display name so that it's not set explicitly on creation. Instead, the display name is just the name of the MPC if the user hasn't changed it. This allows the user to change the MPC and the name will automatically change.

• Proxy bindings no longer allow you to mistakenly pick the same actor it is a proxy for.

• Key selection is no longer emptied when right clicking on the timeline.

• UMovieSceneSequence: Fixed nullptr crash.

• Fixed pre-roll/post-roll sometimes still evaluating sections that aren't set to evaluate there.

• No longer falls back to the double blender system when a property doesn't have blending information. Instead, it falls back to the fast path where we don't blend anything.

• Fixed broken support for ping-pong playback when we only cross the loop boundary once.

• Fixed the pre-animated state being incorrectly saved as "persistent" for root tracks.

• Deleting a muted track row now properly no longer causes other rows to lose their mute state.

• When a fixed timescale is set negative, ranges 2 levels down no longer collapse causing subscenes of subscenes not to play correctly.

  • This only fixes the case of fixed timescale. Similar issues still occur using the playrate/timescale curve.

• Copying a folder now properly copies root tracks as well.

• .MovieSceneSequenceExtensions::FindBindingByName now returns a more reliable binding because it gathers the names from FMovieScenePossessable and FMovieSceneSpawnable which are kept in sync with the actor labels.

• Fixed a regression with a deprecated code path for fetching what animation is playing for UMG Sequences.

• Fixed pause-at-frame logic, which was sometimes incorrectly pausing on the previous frame.

• Select All Keys Forward and Backward now properly select all the requested keys.

• Selecting a layer bar no longer mistakenly deselects component bindings.

• Collapse Nodes and Descendants now properly collapse after being expanded.

• Copying a folder now properly copies all bindings and their child component bindings.

• Payload objects for event keys are no longer lost.

• Disallow picking a proxy binding that's already bound to the current one.

• Remove the "Blocking Evaluation" checkbox from the advanced menu, since we can already set it from the playback options.

• Fixed ongoing focus issues in the key details. Sequencer are now committed when focus is lost and keys are not accidentally created with incorrect values.

• Fixed the time warp curve still evaluating even while muted.

• Fixed a bug where the keyable indicator would not update for the selected object in the details panel after opening a sequence. It required adding to the sequence or selecting new objects.

• Fixed pre-roll/post-roll sometimes still evaluating sections that aren't set to evaluate there.

• Removed calling Modify from SetPreRollFrames / SetPostRollFrames. The caller should be responsible for calling Modfiy().

• If you copy an event track from one sequence to another, the events in the pasted event track will point back to the blueprint director in the copied sequence. This is not allowed, so those events are now cleared.

• Fixed creating an object property track as a class property in python not properly setting the bClassProperty value which allows a class chooser to pop up instead of an object chooser.

• Fixed keys not selectable on multiple rows.

• Restored a section model expansion state to be closed if it was before, since RestoreLayout resets it to expanded.

• We now tear down the Take Recorder's Sequencer instance before we delete and GC the sequence.

• Re-added dropped support for Blocking Evaluation in UMG animations.

• Fixed a crash when reinitializing a Sequencer editor on a new sequence while the previous one had legacy tracks

• When importing cameras, now applies a uniform scale modifier to distance based parameters (Manual Focus Distance).

• No longer blends enum values, and make the byte track use the enum system when it animates an enum.

• Ensured that evaluation context buffers are flipped if an eval task is active prior to forced update.

• Added a potential fix for a memory corruption of UMG animation states.

• The topmost unmuted Cinematic Shot is now correctly evaluated.

  • Previously, if a muted Cinematic Shot was topmost, it wouldn't be skipped over.

• Fixed some properties that should appear to be animatable (i.e. FieldOfView and AspectRatio for Cine Camera Components).

• Fixed an issue that when converting to a spawnable, sometimes the original possessable meshes were still visible.

• Fixed undo of camera cut section now restoring the camera binding properly.

• Fixed regression of pre/post-roll behavior in the skeletal animation track.

• Creating the initial key for material tracks now respects the default interpolation type setting.

• Snap play time to pressed/dragged key only if snapping is enabled.

• Fixed a reference-leak in the Track Instance system.

• Setting the time of a key through the Properties menu now works properly.

• Keying specific channels of a transform through the Details Panel now properly sets the key with those current values (and not 0).

• Fixed calls to bool property custom accessors, which were using the wrong function signature.

• Better handling looping for camera cut tracks:

  • Added a new "HasLooped" flag on the evaluation context.

  • Assumes by default that looping sequences are "seamless" and do not create a straight/hard camera cut on loops.

  • Added an advanced evaluation flag to opt out of this assumption.

• Fixed undo not working when editing with control rigs.

• Now fully supports all camera and post-process properties when previewing blending camera cuts.

• Disabled ensure before cleaning up camera cut track viewport modifiers.

• Fixed regression in how skeletal animation sections behave when resized from the left edge.

• Take the first loop start offset into account when determining if a skeletal animation section needs to loop.

Deprecated:

• Deprecated FMovieSceneBinding::Name since it's redundant and not kept in sync with actor labels.

• Can now return multiple objects with FMovieSceneBindingResolveResult. FMovieSceneBindingResolveResult's Object is deprecated in favor of an array of Objects.

• Migrated text tracks to Movie Scene Tracks plugin (enabled by default). Deprecated MovieSceneTextTrack plugin.

Skeletal Editing

New:

• Skin weight profiles can now be switched directly in the skeletal editor viewport, if there are skin weight profiles defined for the skeletal mesh asset.

• Edit Weights Tool: Fixed removing weights from vertices weighted fully to a single bone turning them into unweighted vertices.

Bug Fix:

• Animation: Editing the text field in the curve editor of an anim montage no longer crashes.

Editor

Datasmith

Bug Fix:

• Fixed 3dsmax plugin support for 2026.

Framework

New:

• Fixed GetOwnerPackages() for instanced structs inside non-complex properties.

  • FStructurePropertyNode::GetOwnerPackages() fails at walking up the property nodes for a specific case, and may trigger an ensure. When stumbling upon an instanced struct, GetOwnerPackages() walks up by getting the direct parent.

  • However, this parent is not necessarily a complex parent (can be a non-object/structure property type). To make sure the walk happens correctly, the case should be handled the same way GetInstancesNum() does (get complex parent of parent).

• Added a few virtuals to cosmetic SGraphNode getters.

  • Useful while adding advanced styling in custom node editors. In some cases it might be possible to avoid overriding engine methods by implementing our own variants, with different names, but not in every case.

  • Also reusing original methods makes the programmer's intent much clearer - what part of the base class was actually overridden.

• Implements experimental Capture Stealing in ITF Input Router.

• Updated MathStructCustomization metadata extraction to include InstanceMetadata

  • This change updates metadata extraction for header row to include InstanceMetadata. It is useful when assigning metadata to Vector/IntVector types via other customizations.

• UToolMenu Items will now override any parent Tool Menu Items of the same name.

• Positioned Tool Menu Items that fail to be positioned will now be inserted at the end of the section.

• Improved reliability of legacy SExtensionPanel support in the new viewport toolbar. Extensions are only enabled when there is enough information to support their existence.

• ToolMenus: Adds options for whether a Tool Menu Entry with an insert position that can't find its target should insert anyways and/or log.

  • Defaults to both inserting & logging.

  • Disables logging if the ToggleViewportToolbar and ToggleHideViewportUI commands can't find the ToggleFullscreen command in the Level Editor Window menu.

Bug Fix:

• Fixed an edge case Blueprint Editor crash on exit.

• Fixed an issue where top-level toggle buttons in Viewport Toolbars looked like raised buttons.

• Users can now change the derived type on default value instantiations used to initialize a base type reference member in saved instance data when using override serialization.

• Fixed the asset reference filtering not working when dropping assets on Material, Niagara Script and Texture Graphs, or on nodes and pins of any asset graph type.

• Fixed inconsistencies between drag and drop visual feedback and drop behavior in Animation State Machine, Sound Cue, and Texture Graphs.

Deprecated:

• The old Level Viewport Toolbar Panel Extensions are now deprecated. They will be removed in a later version.

Interchange

New:

• Reduced memory usage when importing static meshes.

• Added a SubdivisionAPI custom schema for specifying per-prim subdivision level.

• Added support for array node attributes.

• Added support for subdividing static meshes and geometry caches when importing via USD Interchange.

• Added more C++ UsdWrapper types and tweaked the Unreal.natvis file to improve how they're displayed on the debugger.

• Upgraded MaterialX version to v1.39.3.

• Textures imported with non-power-of-2 dimensions or non-multiple-of-4 dimensions were previously automatically set to NeverStream and Uncompressed. This can now be toggled with a config setting :TextureImportSettings::bDoAutomaticTextureSettingsForNonPow2Textures .

  • Also when textures initially imported as nonpow2 are re-imported as pow2, they now get their settings automatically fixed to the defaults for pow2 textures.

• Improved the performance of importing skeletal meshes with multiple morph targets via USD Interchange.

• When importing USD stages through USD Interchange, SkeletalMeshComponent prims will be spawned with AnimSequences assigned to them, if any were imported.

• Added a "Use Single Bone" option to import a static mesh as a skeletal mesh with top node as the only bone.

  • If "Force All Mesh as Type" is set to "Skeletal Mesh" and "Use Single Bone" is checked, the imported skeletal mesh will have a unique bone at its origin called "Root".

• Added a new option to the USD Export Options dialog when exporting levels to USD called "Export to Nested Sub Folders", which restores the previous behavior of exporting asset layers to a folder structure that mirrors the content folder structure

• Interchange: Added support for importing OBJ into level.

• Reduced memory usage when importing skeletal meshes.

• Upgraded OpenUSD version to v25.08.

• Interchange USD can now import groom assets and groom caches.

• Added support for dome lights via SkyLightComponents when importing via USD Interchange.

• Removed FNavigationOctree::AddNode Warnings during Level Import.

• Implemented a Nanite triangle threshold value on the Interchange generic asset pipeline, in order to enable Nanite only for meshes past a triangle count size.

• The USD Interchange translator has a new setting for collecting prim metadata as translated node user attributes. It can also specify a regex for filtering of particular metadata fields.

• Refactored the LevelSequence handling for USD imports in order to properly support subsections due to references and payload arcs.

• Importing via USD Interchange will now reuse generated assets when importing instanced prims.

• Added support for OpenUSD on Windows ARM64.

• Refactored skeleton handling in Interchange USD to not consider the skeleton prim itself as a root joint, which prevents transforms applied directly to the skeleton from being ignored in some cases.

• Interchange USD imports that preserve the pseudoroot node will now produce a top-level actor named after the root layer's display name, as opposed to being always named "/"

• Now uses the default static mesh collision profile for static meshes generated via the USD Stage Actor imports.

Bug Fix:

• Fixed Reimport not showing skeletal mesh conflicts.

• Fixed missing AnimSequence assets when importing animation tracks via Interchange that have a total length below MINIMUM_ANIMATION_LENGTH (of 1/30 seconds)

• USD: Editing keys in Sequencer now properly update back to the USD Stage.

• Fixed node name collision suffixes appending to previous suffixes, producing names like Cube12345

• Fixed actors with identity transform being imported via Interchange with the inverse transform of their parents in some cases.

• Fixed imported LevelSequences overwriting others with the same name when importing some very complex USD scenes.

• Fixed cameras imported from OpenUSD with fStop of zero so that depth of field effects are correctly disabled.

• Fixed incorrect skeletons being imported via Interchange FBX in some edge cases when TransformLinks seem to represent local transforms.

• Fixed static mesh collider transforms being incorrect in some cases when importing into level with Interchange.

• Fixed some issues with baked skinned mesh transforms when importing skeletal meshes with morph targets via USD Interchange.

• Fixed how AnimSequences seemed to have no animation data after using Actions -> Import on the USD Stage Editor.

• Fixed issues with using Material Search Location when importing scenes with Material Instances via USD Interchange.

• Fixed automated reimports still showing the options dialog when reimporting via Interchange or USD.

• Fixed metadata not making it onto actor AssetUserData when importing scenes via Interchange in some scenarios.

• Now discards empty LevelSequences when importing from USD.

• Fixed SparseVolumeTexture assets not being generated by USD Interchange when importing scenes with volumes if the exact same volume node shows up on the stage more than once.

• Fixed a crash when trying to parse USD LodSubtreeAPI schema applied to skinned meshes.

• Fixed import of UsdPreviewSurface into Material Instances for USD materials that have output connections to other shader graph or material prims.

• Fixed performance bottleneck when importing many lights via USD Interchange.

• Fixed some name-prefix-based collision meshes not being correctly used when importing via Interchange in some cases involving name collision.

• Can now generate the desired simple collision meshes even if the shape disagrees with the provided mesh data.

• Fixed morph target normals and position offsets not being skinned with geomBindTransform when importing skinned meshes via USD.

• Fixed how Interchange USD was not using timeCodesPerSecond values when baking skeletal animation tracks.

• Fixed incorrect vertex ordering of subdivision surface meshes imported from OpenUSD when their orientation is "leftHanded" and subdivision is enabled.

• Fixed a crash when parsing some USD SkelRoots configurations with multiple Mesh prims that contain normals.

• Fixed how USD asset imports were persistently disabling the "Import Into Level" option to import actors.

• Fixed OpenVDB being imported via USD stages without compensation for the stage's upAxis and metersPerUnit values.

• Fixed level exports to USD always using absolute file paths for layer references and payloads.

• Fixed Euler flipping issues when importing some USD stages with complex rotation animation.

• Fixed invalid skeletons being produced when importing some USD stages with prim names that are not globally unique.

• Fixed various issues while importing an asset containing elements named "None"

• Fixed support for UDIM textures when opening or importing USD Stages via the USD Stage Actor.

• Silence a couple warnings when trying to fetch transforms from Interchange scene nodes with none authored.

• Fixed missing actors and assets when importing scenes via USD Interchange that contain sibling prims whose names differ only by character casing.

• Fixed a crash when resaving assets imported with Interchange after deserializing them with Interchange disabled.

• Fixed HeterogeneousVolumeComponents not refreshing after their SparseVolumeTextures imported via USD Interchange were reimported.

• Fixed incorrect skeletal mesh influences when importing skeletons with multiple root bones via Interchange USD.

• Fixed various import issues related to using names that resolve to NAME_None.

• Fixed risk of missing content when importing FBX containing assets or bones requiring name sanitization.

• Fix SparseVolumeTexture assets imported via Interchange USD ending up named as "Null" if the VDB filename itself was purely numeric.

• Fixed the handling of some skeletal mesh edge cases via Interchange USD, like nested LOD meshes.

• Fix transforms placed directly on LOD meshes being ignored when importing into level with Interchange USD.

Scripting

New:

• Exposed FullyLoadPackages/FullyLoadAssets functions to editor scripting via EditorLoadingAndSavingUtils

  • These fully load the given objects, so that UE no longer has a write lock on their on-disk files (eg, when needing to overwrite the file via an external application).

  • This is also available in the UI via Asset Actions -> Load, if you hold shift while clicking on Load.

• Added support for texture-based tool icons in Scriptable tools.

• Added support for setting a custom UUserWidget above the tool details panel of a Scriptable Tool.

• Preview Platform Blueprint Functions:

  • TogglePreviewPlatform: Toggle the Preview Platform On/Off

  • SetPreviewPlatform: Sets the Preview Platform.

  • The Preview Platform is set from a list of valid Preview Platforms, the same present in the Preview Platform Menu.

• Added a Disable Preview Platform Blueprint Node.

• Added a GetDrawableGeometryActor() BP function to fetch the actor that owns any line, point and triangle sets added by a Scriptable tool.

• Exposed FTSTicker to Python:

  • This exposes the superior and safer FTSTicker-based ticking method to Python, and existing Python scripts using the Slate-based ticking methods should consider migrating to use this new method (unless forwarding ticks to an embedded UI framework, which was the intent of the Slate-based ticking methods).

  • The new ticker callables can be registered via `unreal.register_ticker_callback(...)`, which takes a callable (taking a float delta time, and returning a bool where True means continue to tick), along with the delay (in seconds; default 0) that we should apply between each ticker callback. `unreal.unregister_ticker_callback(...)` can be used to remove a previously registered ticker callback.

  • Examples:

    • def run_once(dt): print("run_once") return False # stop ticking

    • unreal.register_ticker_callback(run_once, 1.0) # call run_once once after 1 second

    • def run_many(dt): print("run_many") return True # continue ticking

    • run_many_handle = unreal.register_ticker_callback(run_many, 1.0) # call run_many repeatedly after 1 second delays

    • unreal.unregister_ticker_callback(run_many_handle) # stop calling run_many

• Exposed the ability to include or exclude editor-only references from script asset registry queries

Bug Fix:

• Added an encoding fix for PipInstall to force a utf-8 encoding.

• Fixed a crash in ExecutePythonScript when Python was disabled at runtime.

• Fixed a crash when re-registering Scriptable tools during mode shutdown.

• Fixed reachable garbage objects warnings when compiling ScriptableTools containing ScriptablePoint/Line/Triangle sets.

• Fixed an issue with accept/cancel/complete actions not firing in ScriptableTools mode.

• Fixed 'no world was found for object' warnings when invoking WorldContextObject functions in a Scriptable tool.

• Fixed a crash when calling DataTable RemoveRow from editor scripting.

• Fixed non-deterministic tool order in Scriptable Tools category palettes.

• Added a fix to ensure AssetTools do not call slate functions in headless.

• Fixed Python Callback attached to Dynamic Delegate

• Editor can now run even if Python is not able to load properly.

UI

New:

• Significantly improved the Content Browser column sort performance for large search results.

• Updated the Content Browser navigation bar so clicking in the empty space edits the package path if available instead of the virtual path.

• Slate drawing optimization: fixed float comparison of the alpha that could send an invisible element to the renderer, for negative or small alpha values.

• In the graph editors, right clicking to summon the node context menu now includes the hovered wires connected pins, if any. This allows, for example, insertion of a 'NOT boolean' node on a bool wire in the blueprint editor

• Made the "Show Selected" action for actors always visible in the context menu.

• SlateIM: Add support for Tab widgets

• CommonUI:

  • Updated CommonWidgetCarousel to be more consistent in its widget caching.

  • Added an option to determine whether or not to cache widgets at all

  • Old behavior was to cache widgets in the carousel's RebuildWidget, but widgets added at runtime via AddChild would never be cached.

  • Currently caching is enabled by default to match the behavior when children were added at design-time, though this could result in increased memory usage in use cases where all widgets were added dynamically.

• Added a clockwise ordering option for DynamicEntryBox.

• Updated the source control Submit dialog to display full file paths for non-asset files in the Path column.

• Waveform editor: Add icons for fade options

• Waveform:

  • Now calculates LUFS and Sample Peak values on audio import, on Waveform Editor open, and on Waveform Transformation changes.

  • Now displays LUFS and Sample Peak as meta data when hovering over a soundwave in the content browser.

• The Path column in the Asset View will now display the package or object path of the row item if available instead of the virtual path.

• Redesigned Platforms menu moved from the toolbar to the main menu.

• Can now specify a screenshot view rect via FScreenshotRequest::RequestScreenshot:The view rect will be ignored if it is invalid (empty or not within the extent of the render target), or if bShowUI=true, since that takes the slate widget screenshot pathDefault behavior remains the same (to screenshot the whole window)

• Enabled 10-bit swap chains on desktop platforms even when the feature level is ES31.

• Slate: Modified GetCachedWidget:

  • GetCachedWidget now returns the Widget returned by RebuildWidget.

  • GetWrappedWidget returns the Widget return by RebuildDesignWidget if available. Otherwise, returns the widget returned by UIComponents via RebuildWidgetWithContent.

• Added InitializeInEditor function to UserWidgetExtension and WidgetBlueprintGeneratedClassExtension to be able to support proper initialization in Editor for Extensions.

• Added utility functions to query private states in the widget.

• UMG Bindings: Added a new Conversion Function SetVectorParameter that takes a FColor and converts to FLinearColor.

• Added support for package path suggestions to the Content Browser navigation bar.

• Added support for navigating to C++ class package and object paths entered into the Content Browser navigation bar.

• Optimized the font shaping process when using complex shaping (typically for Arabic).

• Added a Python script for generating an html color palette for the FColorList class.

• Updated mouse capture and high precision mode handling on Windows to save up to .5ms on redundant API calls

• A UFont can now be a wrapper around FCoreStyle::GetDefaultFont(), for use with editor UI.

• Added a CVar `Slate.UseSharedBreakIterator` to support shared ICU Break Iterators to reduce CPU usage. False by default.

• Added new Header and ToolHeader sections to the ToolkitBuilder.

• Added support for MVVM Bindings in asset diff tool.

• Exposed world context pin on MVVMViewModelBase. This allows blueprints on a Viewmodel to access world subsystems (assuming they have an object they can use to resolve the world context).

• Add SetLazyContentWithCallback to CommonLazyWidget to improve async usage in blueprints.

• Add blueprint function, SetViewModelByClass, for setting VM by class on a widget directly to simplify usage.

• Exposed a setter for CategoryToolbarVisibility in FToolkitBuilder.

Bug Fix:

• Fixed a regression where Toolbar buttons with a combined options menu did not display that options menu when the toolbar button was clipped.

• Fixed an issue where Spline-related UI elements were displaying XYZ axis labels and tooltips even when the editor was running in LUF coordinate mode.

  • Details: Updated the context menu and details panel for Splines so that axis labels, tooltips, and action names now correctly reflect LUF when active.

  • This includes context menu areas like SnapAllToSelected, SnapToLastSelected, and SetLockedAxis (temporarily disabled).

  • This also includes Details panel areas for Spline settings like Selected Spline Nodes Location, Rotation, Scale, Arrive Tangent, Leave Tangent, and Up Vector Logic was added to ensure these UI elements are now dynamically aligned with the current coordinate system.

  • XYZ (FLU) remains the fallback when LUF is not enabled.

• UMG Sequencer: Fixed 2 issues.

  • When adding an event track as the first item in a widget animation, the duration of the animation would reset to 0, and notably the playback range start would be set to exclusive (range as (0,0)). This would persist after the length changed, for example to (0,500), meaning that any items placed on the 0 frame, such as events, would never evaluate.

  • When not encountering the above issue, items placed on the 0 frame would evaluate twice. This was due to a refactor to the way widget animation would playback.

• Fixed the Asset View Type column sorting by the full class path rather than the display name that is displayed.

• UMG:

  • Fixed named slot content not saving for named slot instances of widget blueprints that extend widget blueprints.

  • Fixed CDO de-sync with root widget property changes.

  • Added a fix to avoid crashes in cases of re-entrancy.

  • Various fixes for widget animations:

    • Fixed a crash caused by the runner being invalid for an unknown reason.

    • Fixed iteration of active animations that can grow during that iteration.

    • Fixed iteration of animated widgets that can grow during that iteration.

  • Fixed first and last frame evaluation of animations - Don't tick the widget on the first frame, wait until the next frame. The flag for that was lost during the animation refactor in 5.6 - Fix the evaluation time for when stopping which should indeed be the first frame of the playrange, not frame 0. This was incorrectly ported during the animation refactor.

  • Fixed how we consume the current animation time on play, to prevent events at frame 0 from firing twice.

  • Double clicking on a color key in the timeline now correctly opens the color picker.

• Fixed an inconsistency in the Viewport right-click context menu, where the Transform options were always ordered according to FLU rather than the expected LUF, even with LUF coordinate system in use. Behavior is now consistent and context-aware across coordinate systems.

• Can now pick struct type when class type picking is enabled, eg, from within the Data Table editor

• UMG Designer:

  • Fix to FWidgetBlueprintEditor::SelectObject to support UObject selection. Fixes a nullptr access when a property was changed in the detail panel on an object that is not a UWidget.

  • Fixed a crash in Drag and Drop operation. Added more checks around calls to GetCachedWidget that can return a null object during drag/drop and move operation.

  • Fixed a crash in UMG Designer Replace widget context menu operation in the Hierarchy panel. This happened when using the replace function with a User Created widget selected in the Palette panel.

• Optimized the widget editor's palette to reduce refresh cost in large projects.

• Fixed virtual texture thumbnails sometimes showing the wrong texture.

• Fixed an issue where screen-space widget components wouldn't render for players other than player 1 if splitscreen is disabled. There is now an option (ShowAllPlayerWidgetsWhenSplitscreenDisabled) to overlay the player layers, instead of culling out all player layers except for player 1.

• Fixed a regression that caused the editor to crash when attempting to place a cooked Actor-based Blueprint class via drag/drop.

• Fixed a memory leak when trying to trigger the display of a FCanvasBatchedElementRenderItem without a primitive to draw.

• Fixed an issue where SearchableComboBox couldn't be set back to the same value after resetting to default.

• Fixed an issue where SCommonButton wouldn't release when it loses focus

• Fixed a rare crash in SlateRHIRenderer due to both main thread and render thread possibly writing to the same arrays simultaneously.

• Fixed a situation where the Asset Dialog hotkeys either didn't function, or operated on the wrong widget.

• Slate: Fix SStackBox not respecting the Orientation slate arg.

• Fixed various possible crashes and bugs when importing offline fonts.

• Fixed Content Browser columns appearing as sorted after you click on their headers in the column view even when they are no longer the active primary or secondary sort columns.

• MetaSounds WaveAsset: Removed create new asset actions for unsupported assets.

• CommonUI:

  • Fixed not being able to click buttons with Virtual_Accept while binding hold actions to Virtual_Accept.

  • Ensure UCommonInputPlatformSettings load is done at the right time to avoid a synchronous load flushing async load request. Now PostLoad will be called as expected for all UPlatformSettings.

  • Fix persistent action bindings not always being registered as persistent actions.

• Fixed custom dialogs non-deterministically aligning their buttons.

• Fixed an issue where FQuat variables always displayed with the name "Rotation" in the details panel, regardless of DisplayName metadata or the variable's actual name. This fix ensures that the intended name is respected and shown properly in the UI.

• Fixed a typo in BoxElem.h

• Prevented Pin Value Inspector Tooltips from using global invalidation, as it can cause broken tooltips or crashes in some scenarios.

• SlateIM:

  • Fixed a case where child rows would not get removed when no longer drawn.

  • Fixed Viewport roots preventing mouse input for the whole viewport.

• Fixed an issue in the ListView Widget where OnEntriesGenerated would fire for each entry instead of firing once all entries are generated

• Fixed a crash in SObjectWidget OnFinishedPointerInput missing CanRouteEvents that causes nullptr access.

• Fixed Message Log not displaying when failing to save packages.

• PropertyPermissionList: Fixed buttons not appearing for functions marked CallInEditor details panel unless added to AllowList explicitly.

• Fixed an issue where users can't type polish letters s and a (with a tail) into the text input.

• Fixed an issue with Slate Screen Reader at initialization of the plugin.

• Add missing validation check with enabling or disabling SWindow.

• UMG Viewport: Made sure we EndPlay on the preview world during teardown.

Deprecated:

• Deprecated SCustomDialog VAlignButtonBox since it didn't affect the button layout, but could result in the button rendering outside the dialog if VAlign_Center was used.

UX

New:

• StylusInput: Added MacOS support.

• Change the default of bUseLinkedOrthographicViewports to `False`.

• Simplify the camera speed settings to just expose the camera speed. Min/max values are still exposed in settings.

• Slice graph connections by alt+middle-mouse dragging in the graph editor.

• Fix a bug where viewports could control the movement of a locked actor in a different viewport.

• Added support for direct manipulation of editor viewport orthographic near & far planes.

  • Added a new Editor Viewport Depth Bar that provides visual control over those planes.

• FDateTimeStructCustomization now has a tooltip. Hovering over a DateTime property's text box in the editor provides a hint at the format.

• Disabled use of a Template SoundWave, can be re-enabled in Editor Preferences->Audio Editor Per Project Settings.

• Switched to camera-relative vertical panning by default. Add an option for world-based vertical panning.

• Waveform Editor:  Instated Waveform editor as the default SoundWave editor.

• Splits viewport panning logic so that the middle mouse button and the left+right mouse button gestures are distinct. Middle mouse can be camera relative (and continues to be so by default) while left+right mouse button always move up and down.

• Outliner: Added visibility function versions that work on the selected actor's hierarchy and set H to default to toggle selected hierarchy.

• Asset Picker Size Scaling as Editor Preference: Added the Editor Setting "Scale Asset Picker Widget Size" to allow the size of asset pickers to be scaled up or down.

• Added a new "Toggle Selected Actor Visibility" command & behavior. This command takes the default "H" binding from "Hide Selected Actors". The command:

  • Hides selected actors if any actors in the selection are visible.

  • Shows selected actors if all actors in the selection are hidden.

  • Does not affect selection.

• Show template projects from all plugins:

  • Problem:

    • New Project dialog only listed template projects from enabled plugins Users couldn't see or start from templates included in installed but disabled plugins.

    • Empty/invalid background image paths in template categories showed broken visuals

  • Solution:

    • Updated search to include template projects from all discovered plugins Added warning icon + tooltip for templates from disabled plugins.

    • Selecting a disabled plugin template shows a warning/error box that the plugin is not enabled.

    • Warning is non-blocking (no modal), project creation proceeds after user confirmation.

  • Notes:

    • Keeps behavior lightweight.

    • Surfaces risk (no additional modal asking to confirm creation) but doesn't block flow.

Bug Fix:

• Ensured that the "Hide Selected At Startup" action now correctly applies to all selected actors, regardless of their current visibility state. Previously, actors that were already hidden were skipped by this action. With this change, both visible and non-visible actors will be consistently marked to start hidden on load.

Foundation

Build

New:

• AssetManager, AssetRegistry: Add Property AffectsCookRule to ManageReferences.

• Extended the AddExternalImportValidation of missing UClass imports to validate imports of all native types.

• Added support for the 'Activate' flag in PluginReferenceDescriptors. This fixes an issue where the 'Activate' flag would be deleted from plugin descriptors when running some UAT programs.

• IncrementalCook is now enabled for DLC cooks, but for DLC cooks it is still experimental and is not yet robust.

• UHT: Added support for engine version comparisons as preprocessor conditions.

• Prevented Clang builds for Windows from launching multiple link jobs simultaneously to avoid memory exhaustion.

Bug Fix:

• DLC Packaging: Fix missing .upluginmanifest when packaging without -DLCPakPluginFile.

  • With the plugin manifest present the output folder from a DLC package can be copied into a packaged game as-is and will load through the default plugin discovery and loading process.

• SavePackage: Fix errors in IllegalReferences diagnostic; it now more accurately finds the object and property that caused the illegal reference.

Core

New:

• Added UE::CFloatingPoint concept.

• Added value hashes and sizes to DDC replays

• RemoteObjects:

  • Transactional RPCs can be rescheduled per Actor. This means the transaction can abort and try other transactions while we wait for needed dependencies to service the RPC.

  • TimerManager now has some limited transactional support.

  • Exposed GetClass that may skip migrations when used with FRemoteObjectId.

  • Exposed GetRemoteId() on TWeakObjectPtr

  • Distinguished between Loaning out an Object and Reassigning a Borrowed Object. This helps clarify some situations, particularly where you're sending an object and maintaining ownership you can just check if you're Loaning it now, because ReassignBorrowed is now a separate case (which means another server has borrowed it, but you never owned it).

• Allow third-party crash handling to use `FAdditionalCrashContextStack`.

• Default WindowsPlatform.bClangStandaloneDebug to true. This slightly increases pdb size when compiling with clang, but improves debugging experience.

• FStateGraph and FStateGraphNode no longer timeout if -NoTimeouts is provided on the command line.

• Added [[nodiscard]] to mutex functions.

• Added [[nodiscard]] to TLess, TGreater and TEqualTo.

• Optimized TCppStructOps vtables to only include functions that will be called. This now prevents users from making UScriptStruct or TCppStructOps a friend in order to allow your class only constructible by the CoreUObject system.

• Refactored FInstancedPropertyBag's CopyMatchingValuesByID function to allow the caller to provide a matching function. Added CopyMatchingValuesByName that matches properties by name instead of ID.

• Added FRecursiveWordMutex to support very early and/or very late recursive mutex usage.

• Removed LLM dependencies on FCriticalSection and FRWLock.

• Eliminate static log records in the absence of source location and log tracing to reduce program size.

• Made mutating EnumClassFlags functions usable in constexpr contexts.

• Added UE_LIFETIMEBOUND to TValueOrError.

• Exclude trace state when log trace is disabled and optionally compile out source location from logging to reduce program size.

• Use Yield() instead of YieldThread() when spinning in mutexes to improve performance under heavy system load.

• Optimized ParkingLot::Wait when there is no timeout.

• Added UE::CContiguousRange and CPointer concepts.

• Added CCharType concept and applied it in TStringView.

• Added Max() functions to sets and maps - and TSparseArray which is needed for sets.

• Replaced TSortedSet's O(N^2) Append with an O(N) (at best) or O(N log N) (at worst) and added tests.

• Added some basic TSet tests, based on the existing TMap tests.

• Specialized FPlatformManualResetEvent for each platform that we target.

• Added FOutputDeviceFence to support lifetime management of dynamic log records

• Updated debug visualizers for TDeque, supporting visualisation of elements when the container is set up to use a different allocator such as TInlineAllocator or TFixedAllocator.

• Add explicit nullptr constructor/equality operators to TWeakInterfacePtr Mark functions in TWeakInterfacePtr [[nodiscard]]

• Fixed overallocation for unused null terminators in TStringBuilder.

• Added TFunctionWithContext to adapt a callable into a function pointer and context

• Improve accuracy of GC time limit by setting object destroy granularity to 10 (instead of 100) and provide a way for it to be tweaked per project with gc.IncrementalBeginDestroyGranularity.

• Optimized ParkingLot callback code generation

• Updated UE::Core::Private::StringLength to use TCString::Strlen outside of a constant-evaluated context, to speed up compile times with MSVC.

• Added UE_IF_CONSTEVAL and UE_IF_NOT_CONSTEVAL.

• Updated Oodle to 2.9.14.

• Used InitializeCriticalSectionAndSpinCount to avoid an extra function call during construction of FWindowsRecursiveMutex.

• Added CConvertibleTo concept mirroring std::convertible_to.

• Added a configurable intrusive unfair non-recursive mutex.

• Added TInstancedStruct::NetSerialize function.

• Removed contention on root flags when pinning weakobjectptrs.

• Improved the logging backlog to minimize the number of missed log lines during the initialization.

• Added TLogTemplate and control over log template allocation.

• Added IsLocked and IsLockedShared to the mutex types.

• Add Async.ParallelFor.DisableOversubscription which if enabled will only use existing threads which can be faster when cores are saturated.

• Added support for nested $format in structured log formatting.

• Added Intel OneAPI and Microsoft Clang 19 HWPGO integration.

• Added an ExecFileOverride resource to BootstrapPackagedGame.

• Optimized FLazyName to support constant initialization.

• Deflate, gzip & lz4hc compressors now honor COMPRESS_BiasSpeed and COMPRESS_BiasSize

• Added TExternalStringBuilder and support for TStringBuilder<0>

• Improvements to GameFeaturesSubsystem and FPluginDescriptor:

  • Added a new hook to PluginDescriptor to allow customized loading of uplugin json data.

  • Updated GFS to ensure that, at least in the editor, we will try to use the PluginManager's copy of the plugin data rather than re-reading it and deserializing it from json ourselves. This is necessary to take advantage of the customized loading.

• Enabled custom crash handling for GPU crashes.

• Optimization for FSoftObjectPath::ResolveObjectInternal to avoid the round trip to/from string.

• Add a console command, core.ResetEnsureState, to reset the ensure state so they fire again. This will cause all non-always ensures to trigger again if they've already been suppressed.

• Reduced memory use by FOutputDeviceFile by 992 KiB in the default configuration.

• Added better error messages when TLess, TGreater and TEqualTo when used with a type without the corresponding operator.

• Now validate LinkerSave unmapped objects against the package harvester excluded object list. This removes the limitation of asserting when FindObject is called while GIsSavingPackage is set.

• FPaths:CreateStandardFilename: changed behavior to normalize paths that cannot be standardized: .. is collapsed when possible.

• Added UE::CNotCVRefTo concept.

• Removed dependencies on ParkingLot from Windows stack walking

• Made the MSVC implementations of FPlatformMath::CountLeadingZeros and FPlatformMath::CountTrailingZeros constexpr.

• Added format string validation to LowLevelFatalError.

• Added UE::CStringViewable and UE::CCompatibleStringViewable concepts.

• ThinLTO is now enabled by default for Clang based toolchains.

• Added an experimental plugin, Global Configuration Data, that can be used as a single point of access to data that may be provided from different systems.

  • Can be used to have console and config data added to blueprints without additional code.

  • Additional data routers can be registers to expand on what data sources are available to the system.

• Added UE::CArithmetic concept.

• Added UE::CCompatibleCharType concept and some usage in TStringView.

• Added UEOps.h to aid in the correct generation of all binary comparison operators based on a couple of simple member function definitions.

• Replaced the UTF8CHAR enum with C++20's char8_t.

• Added checks for non-trivially-relocatable types being used in containers, particularly FGCObject-derived types.

• Added UE_REWRITE, a replacement for FORCEINLINE intended to be used on macro-like functions (rather than for optimization) by 'rewriting' a function call as a different expression.

• Enabled override max printed reference chains via `gc.MaxReferenceChainsToPrint` Cvar.

• FVector2D deprecated comparison operators (from 5.2 onwards) removed.

• Remove deprecated FLinearColor methods, deprecate unused DXT block structs.

• Enabled TSharedPtr and TUniquePtr to be usable as keys in sorted containers, and TUniquePtr to be usable as keys in hashed containers.

• Added std::initializer_list support to TSparseArray.

• Fixed UPS cooking indeterminism for TBox[2] structs on stack Make ForceInit constructor zero out padding.

• Fixed managed storage handle attempting to resolve an unmanaged file more than once after the manager becomes active.

• Added UE::CDerivedFrom concept.

• Added debug visualizers for UE::Math::TVector2<> and FDeprecateSlateVector2D.

• Extended `gc.PerformGCWhileAsyncLoading` to provide the option to garbage collect while async loading, only when low memory is detected (based on gc.LowMemory.MemoryThresholdMB).

• Package flags are now thread-safe.

• Add TargetRules.bIdenticalCodeFolding setting (--icf=all).

• Added intrusive unset optional support to TNotNull.

• Added a benchmark for mutex types.

• Added CSameAs and CDecaysTo concepts.

• Added UE::CIntegral concept.

• Added tests for Algo::StableRemoveIf.

• Added configs managing how GenericPlatformMallocCrash handles allocation requests on non-crashing threads, allowing them to permanently suspend on allocs/frees, suspend on allocs and skip frees, or process as normal.

• Removed dependency on FCriticalSection and ParkingLot in memory allocators.

• Retry in the shared mutex TryLockShared while there is not an exclusive lock.

• Added support for joining non-contiguous ranges in TStringBuilder.

• Added support for optional sub-object references in localized structured log formatting.

• Reduced codegen impact of ensure() macro.

• Added an overload of CreateLogTemplate that takes the format as FText.

• Added support for $locformat in structured log formatting.

• Added NotNullGet for retrieving the inner value from a TNotNull without an explicit cast.

• Experimental Visual Studio 2026 support.

• Added a new experimental API: SpringMath:

  • This includes some useful functions for critically based spring damping

  • Added experimental blueprint library for spring math to expose functions to BP

  • Added SpringMath::ExponentialSmoothingApproxQuat to mirror the existing function FMath::ExponentialSmoothingApprox.

• Added support for creating Property Bag Placeholder types for entity prefabs.

  • This is done via a new table added to package files: ImportTypeHierarchy table.

  • Each entry of that table contains hierarchical information for every FObjectImport entry that is a type (e.g., UClass).

  • This is the second part of a 2 part change. The first change introduced the package file header change along with the object version bump.

  • This change adds the remaining logic to save/load the new table and the change to use it when creating placeholders.

• Added support for AVX10.

• Added write helpers to RapidJsonUtilsAdded UE::Json::WriteCompact and UE::Json::WritePretty, to write a UE::Json::FDocument to a FString in either compact or pretty form.

• Added UE::Json::MakeStringRef and UE::Json::MakeStringValue to help convert a FStringView to a UE::Json::FStringRef or UE::Json::FValue when building a JSON DOM.

• Added some additional aliases to UE::Json that are needed when building a JSON DOM.

• Switched UE::Json aliases to use the UE FMemory allocator, rather than rapidjson::CrtAllocator.

• Added --prioritize-dependency-scanning SN-DBS build option.

• Added `FNonshrinkingAllocator`, which changes the shrinking policy to No by default.

• Added hidden MetaData works for base structs in Instanced Structs.

• Cooker:

  • CookPackageSplitter: Changed the return value of GetGenerateList to a struct (and changed the name to ReportGenerationManifest) so that generators can request that the package containing the generator be not saved.

  • Deprecated the ability to run the cook inside the editor process when launched from editor. The cook instead should always be executed in a separate invocation of the CookCommandlet. This has been the default since 5.3, and we are now deprecating the ability to change that default and will remove all support for it in 5.9.

  • Added the following commandline arguments:

    • -cookshowremaining

    • -cookshowpackagenames

    • -cookshowinstigators

    • These provide a clearer behavior than -dpcvars=cook.displaymode=1|2|4.

    • Each flag can be specified with a value: -cookshowremaining=1|0, or with no value, defaulting to 1: -cookshowremaining.

    • These flags override whatever value has been assigned via config or -dpcvars commandline.

• Introduced a mechanism for render asset updates to be abandoned by owning `UStreamableRenderAssets` so `UStreamableRenderAssets` can be garbage collected independently (See r.Streaming.EnableAssetUpdateAbandons). Abandoned render assets are ticked during GC or every streaming update if r.Streaming.TickAbandonedRenderAssetUpdatesOnStreamingUpdate is true (defaults to true).

Bug Fix:

• Changed FMonotonicTimeSpan::IsInfinity() to stop matching negative infinity.

• Fixed FMath::FindDeltaAngleDegrees and FMath::FindDeltaAngleRadians for input deltas outside [-540, 540] degrees.

• COMPILE_WARNING reports as error when WarningsAsErrors is being used.

• Fixed a potential infinite loop in the serialization of packed ints when loading malformed values.

• Fix potential deadlock in the scheduler if a foreground task is scheduling a background one.

• Fix potential deadlock in object annotations because of 2 different locks used in different order.

• Made -VerifyGC and -NoVerifyGc take all verification cvars into account.

• Fixed invalid access to memory location error in UnrealBuildTool.

• Made sure that pinned UObject are preventing GC of clusters they are part of.

• Fixed composite EPackageFlags not being shown in the debugger, caused by non-power-of-two enumerators.

• Fixed _GetUObjectPacked intrinsic for debug visualizers. This addresses an issue with visualizers for weak object ptrs not working in builds where UE_ENABLE_FUOBJECT_ITEM_PACKING == 1.

• Made TBox's InverseTransformBy and TransformProjectBy both check for box validity before transforming (matching TransformBy).

• Fixed issues trying to load redirected native classes using the StreamableManager (and AssetManager).

• Fixed a bug in GC timing where if it destroyed exactly 100 objects in a frame it could cause a large stall.

• Fixed many log categories having a default verbosity higher than their compile-time verbosity.

• Fixing a crash in CppStructOps caused by unloading a dll at an inopportune time resulting in a dangling pointer to a vtable.

• Fixed TMemoryWriter IndexSize to be a bit count.

• LaunchEngineLoop: Fixed a copy paste mistake in the error message, it now correctly identifies that it fails to load the Game Engine class instead of the Editor Engine class when instantiating GEngine.

• InstancedStruct: Fixed the operator= when copying from a TConstStructView.

• The loader will now flush any remaining async loads before PreExit to avoid async loading to perform operations past the exit point.

• Fixed UE_STATIC_ASSERT_COMPLETE_TYPE for zero-sized arrays.

• Enabled seeking to the end of a response body without returning CURL_SEEKFUNC_FAIL in the Curl implementation in DevHttp module.

• Fixed UI layout for a particular view of the crash report dialog where the screenshot preview can cover button controls.

• Fixed clang miss-leading indentation warnings.

• Checked zlib init and shutdown for errors.

• Cleaned up usages that expect nullptr_t to be in the global namespace.

• Fixed StaticDuplicateObject when Source Object class and Destination class are different.

• Fixed crash when loading content from corrupted pak or optional segment files.

• Disabled nuget audit for the dotnet Development configuration to prevent unactionable dotnet build errors.

• Force synchronous writes on type library input files.

• Fixed pipe and task timeout calculations that generated bad code.

• Deferred invoking the class initializer on duplicated objects until after subobject instancing has occurred.

• Disable 'C4702: unreachable code' when use bUseInlining is disabled.

• Fixed potential race condition in FConfigCacheIni::ForPlatform adding plugins without holding the lock.

• Fixed text import of delegate properties with full object paths, and made FDelegateProperty consistent with FPropertyMulticastDelegate on text export.

• Added static_asserts to TValueOrError to ensure that it's not instantiated with references.

• Fixed a FARFilter with only WithPackageFlags or WithoutPackageFlags set failing to return any assets from IAssetRegistry::GetAssets(...).

• Avoid TInstancedStruct::GetPtr/GetMutablePtr and TStructView/TConstStructView::GetPtr crashing when the underlying struct data is incompatible with BaseStructT

  • This will now ensure instead, though will still perform the bad cast in a shipping build, so any ensures need to be fixed!

• Fixed TStringView::CopyString for copying an empty range.

• Fix a missing test of MaybeWaitingFlag in FManualResetEvent before parking the thread.

• Fixed Algo::RemoveIf calling the predicate too many times in some cases, and added some tests.

• Rehashed map and set properties after instancing key subobjects in their overrides of FProperty::InstanceSubobjects.

• Disabled AutoSDK for LowLevelTests targets.

• Fix thread scheduler to properly apply the cvars TaskGraph.UseDynamicPrioritization, TaskGraph.UseDynamicThreadCreation, and TaskGraph.OversubscriptionRatio which can be used to modify thread performance.

• Adding -nocrashreports support for windows. When provided, we will log crashes/ensures/etc but will not perform more complex reporting that could risk hanging on a file pipe.

• Reimplemented TVectorRegisterType with partial specializations rather than std::conditional_t to work around alignment issue using Clang on Windows.

• Disabled custom property lists during native struct serialization.

• Fixed a race waking threads in FSharedMutex and FSharedRecursiveMutex.

• Added workaround for getting an array reference element from an rvalue tuple under MSVC.

Deprecated:

• Deprecated Alignment in TStaticArray and fixed UB behavior in it's GetData. Made TArrayView and Invoke constexpr.

• Deprecated TSortedMap::GetMaxIndex, fixed TSortedSet::GetMaxIndex and correctly commented TSet::GetMaxIndex and TMap::GetMaxIndex.

• Deprecated public and protected ways of initializing TStringBuilderBase from a buffer.

• Deprecated member TFunction::CheckCallable which was never intended to be public.

• Deprecated TIsConst.

• Deprecated PLATFORM_COMPILER_SUPPORTS_CONSTEXPR_BUILTIN_FILE_AND_LINE.

• Replaced bExactClass with EFindObjectFlags in the FindObject family of functions.

• Deprecated the original log template API.

• Delete FCbFieldIterator::MakeOwned() to avoid breaking the iterator.

Dev Tools

New:

• Added compile warning argument ordering.

• Wildcard support in project sections of UGS ini files.

• Improved the summary outputs of UnrealPak. The units of memory now scale with the number of bytes making it easier to read for both smaller and larger containers.

• UBT DefaultBuildSettings:

  • Build Settings V6 now applied to wundef.

  • Default Build Settings Updates for Targets - V6 - engine.

• BuildCMakeLib: Added support for building third-party projects with CMake using the Ninja build system.

• Adding capabilities to the warning defaults, cleaning up tests, adding more warning+error strings for easier long term adoption & toggling.

• UHT will flag U macros (i.e. UCLASS) found in skipped blocks of code as deprecated. This will be made a warning in a future version of UE.

• UBT Editor: Added graceful messaging for Target upgrade requirements on editor path.

  • Emit the target build settings version & build environment to target file for editor runtime consumption.

  • Consume target file metadata to improve error messaging for Target versions.

Bug Fix:

• Fixing a bug where UAT could hang waiting for output. We now log a warning instead.

• Shaders: Fixed the shader pipeline skipping work if the number of shaders to compile is less than the number of tasks available.

• Fixed an issue where if a TInstancedStruct is used as a function argument, Clang platforms would fail to compile.

• Fixed BuildCookRun to include base build .sig files when generating patches.

• Updating UHT to once again generate an error when a USTRUCT contains more than one base.

• Fixed an issue in UnrealVS that could cause UnrealVS.P4->History to open an empty window

• Updated UnrealVS - Includes fixes to test discovery and execution

• Corrected define usage (UE_BUILD_SHIPPING vs UE_SHIPPING)

• Fixed UHT parser issue where if FArchive is forward declared when used in the Serialize function declaration, UHT would fail to generate the proper code.

• Fixed inconsistent exception logging in Gauntlet.TestExecutor. It now consistently uses Exception.ToString().

• Fixed issue in UHT where it was allowing a USTRUCT to have multiple USTRUCTs as base classes.

• Fixed a bug where presets would be added to the global sync filters if the tab with the preset had its sync filter view opened and the okay button pressed.

• Fixed UGS not showing investigations as "resolved" when using Horde's metadata endpoint.

• Fixed destination files potentially not having the correct permission during SafeCopyFile in UAT, on non-Windows platforms.

Horde

New:

• BuildHealth Server Build: Added JobSummary telemetry.

• Hashed issue handler will now automatically check for a file property in the event's structured logging, and use that data in suspect finding. This should lead to suspect changes being identified more accurately, but relies on emitted warnings and errors including file metadata.

• Analytics:

  • Added a Build Health Dashboard View that shows step outcome history for selected templates & streams.

  • Add ExternalIssueKey & Fingerprint to the telemetry payload for issues. Also includes AnalyticsIntegrationTests.

• Added example of implementing a new Secrets Provider for Azure Key Vault. This secret provider is experimental and provided as an example of how to implement a custom secret provider.

• Added Secrets plugin configuration option WithAws that controls if the AwsParameterStore provider is enabled.

• Added new Secrets API api/v1/secrets/resolve/ that resolves a string to a property value of a secret. For example the string horde:secret:SecretName.PropertyName would resolve to the value of PropertyName for the secret SecretName.

• Only commits with Code CommitTag are considered when searching for Compile issue suspects.

• Removed the unused Password property from EpicGames.Horde.Streams.IWorkspaceType.

• Added the attribute ResolveSecret that allows properties in the Global Config to be resolved to the value of a Horde secret during configuration load.

  • If the property's value is of the form horde:secret:SecretName.PropertyName then if a secret SecretName exists and has a property PropertyName it will be replaced with the value from the Horde secret.

  • This allows sensitive configuration properties to move out of the configuration files to an external secrets provider such as AWS or HashiCorp Vault.

  • New: Updated the Password and Ticket properties for the Build Config's PerforceCredentials property to use the attribute ResolveSecret allowing Perforce credentials to be moved to an external secret provider.

• Changed build graph updates where a node that is skipped but modified does not fail the whole build. This allows the build to continue with only dependent nodes being marked as skipped while non-dependent subtrees can continue to run.

• Replaced the deprecated code coverage tool JetBrains.dotCover.GlobalTool with JetBrains.dotCover.CommandLineTools.

• Added to the Stream Config a StreamTags property, which is a set of name and Boolean pairs; and to the Schedule Config a Condition property.

  • The Condition property can be used instead of the Enabled property to control if the scheduled jobs for a stream should be enabled.

  • Each stream tag will have an environment variable named after it with the UE_HORDE_STREAMTAG_ prefix and a value of True or False, which can be used in BuildGraph script conditions.

• Fixed an issue where capabilities for agents was missing their RAM capacity.

• Updated Temp Storage to allow the maximum number of exports to write in a single request to be configurable from the agent settings. The new option is TempStorageMaxBatchSize and defaults to a value of 20. Modified from contrib .

Bug Fix:

• API encounters ".NET type System.Text.Json.JsonElement cannot be mapped to a BsonValue" on swagger API invocations.

• Fixed an issue where GetNext for ScheduledDowntime would return the previous downtime.

• Fixed an issue where the log for the Downtime Service would print the next downtime being in the past when an expired non-repeating downtime was in the global config.

• Server Tests: Fix the DatabaseIntegrationTest class to properly forward dispose calls to the mongoDBRunner.

• BuildHealth Server: Exposed DateUtc on GetCommitResponse.

• Fixed an issue where capabilities for macOS agents was missing information for:

  • CPU number of logical cores.

  • CPU performance and efficiency cores for Apple Silicon.

  • GPU name and core count.

  • User name, domain name and running as administrator.

• Fixed an issue where the Notices Get method would not return the start and finish times, and if the start and finish times are set then set the active value accordingly.

Insights

New:

• Adds pre and post state change callbacks for TraceLog channels. Allows instrumentations to deny state changes and provide a reason for the denial, as well as performing actions when a channel is enabled or disabled, such as sending initial state, resetting tracked state or activating tracking.

• Added a method of creating a TraceAnalysis session using a custom data stream.

• Added an ability to copy a tooltip value to clipboard from the bookmarks track.

• The PlatformEvents channel now uses callbacks to deny enabling channels and provide user feedback, if requirements are not fulfilled.

• Added support to save data traced via the Direct Trace mode to disk. FDirectSocketStream can now accept an optional FArchiveFileWriterGeneric used to write the data to disk.

• Added support for Frame Start and End Misc Trace events in the minimal trace API.

• Added config variables to provide variable trace log write buffer size and prevent writer sleeping. This helps prevent the write thread from getting saturated under heavy load.

• Increased version of Unreal Insights to v1.08, for the UE 5.7 Release.

• Improved management of TraceLog worker thread in various scenarios. The worker thread can now be started on demand.

Bug Fix:

• Fixed a startup deadlock when launching with -trace=memory without tracehost or tracefile.

• Fixed an issue where FTraceAuxiliary::Relay did not respect the Options parameter provided.

• Fixed an issue due to Trace gap detection using three sync points. Previous logic used two sync points to calculate gaps, but the engine sends out three. In some scenarios this caused an error in gap detection which meant a higher serial was chosen as the next serial. This would leave much of the trace data unprocessed.

Framework

AI

Bug Fix:

• Fixed an issue where selecting subnodes would result in the currently-edited property value to be discarded instead of applied.

AI Behavior Trees

Bug Fix:

• Fixed reinstantiation for Blueprint-based nodes using blackboard key selector.

• Fixed Blueprint reinstantiation issues with some BehaviorTree types.

• AAIController::UseBlackboard: Fixed to correctly return the result of trying to initialize the Blackboard.

• Changed InstanceIdx to use a const int32 to prevent a need for IntCastChecked to prevent possible data truncation.

AI Debugging

New:

• Added possibility in Rewind Debugger tracks to override the default behavior to step backward and step forward commands.

• VisualLogger log entry initialization can now also assign a valid location for components. With this change, double-clicking on such an entry will bring the camera to that location instead of the world's origin.

• Fixed GameplayDebugger local-multiplayer render duplication.

Bug Fix:

• Fixed ever growing buffer in FVisualLoggerBinaryFileDevice when VisualLogger is not set to record to file.

• Fixed debug draw helper functions and SmartObject visualization to properly handle scaled DPI.

AI EQS

New:

• EnvQueryTest_GameplayTags: Added searching for tags container in actor's components if actor itself doesn't implement IGameplayTagAssetInterface.

• Upgraded the description details of the UEnvQueryTest_Pathfinding test to better reflect its behavior in EEnvTestPurpose::Score mode.

Bug Fix:

• Fixed blueprint reinstantiation for EQS types

AI Navigation

New:

• NavLink Generation:

  • Added a name property to generation configs, and JumpMaxDepth can now be negative.

  • Activated the "enable" property now that multiple configurations are supported.

  • Added multiple link configurations for generated navlinks.

  • Added LinkGenerationSelectedConfig to debug a specific config.

  • Improved trajectory ground sample debug display.

• GameplayDebuggerCategory_Mass: Now draws a purple circle around entities that are LOD off.

• AsyncNavWalkingMode can use navmesh normal instead of physics hit normal.

  • Now always take the highest hit location in z when searching for ground location.

• Mass Navigation:

  • Added text to MassNavigation::Debug methods.

  • Added an option to avoid slowing down when steering.

  • Added a MassSceneComponentVelocityTranslator to copy velocity between mass entities and actors.

  • Updated NPC desired movement based on current velocity when in animate mode for root motion driven NPCs. This helps with smooth blending into animated states from steering when character is root motion driven.

  • Added navmesh path boundaries to mass gameplay debugger.

  • Added logs in the navigation flow.

• Mass Entity: Fixed an infinite loop caused by loop variable overflow ().

• NavMesh: Added a navmesh tile building optimization when using CompositeNavModifiers with lots of data.

• Mass Navmesh Navigation: Increase default corridor width used by FMassNavMeshPathFollowTask.

• Pathfind: Changed warnings to logs when InitPathfinding can't find a polygon at the start or the end location.

• Removed deprecated 5.4 navigation code.

• MassNavMeshPathFollowProcessor: Improved logging information and clamping distance on the closest segment.

• MassNavMeshPathFollowTask: Removed overlapping points when building a corridor.

• Mass Navigation and Avoidance:

  • Made a fix to apply max speed in UMassApplyForceProcessor.

  • Added debug to display standing entities in mass avoidance.

  • Pathfollow -> Made a fix to keep the steering force when near the end of a path (we want to apply the fade only on the avoidance forces).

  • Used stronger avoidance forces when getting out of environment boundaries.Added an optional tag to prevent moving backward while avoiding.

• Navigation: Added in the output log information regarding invalid pathfind requests and changed log verbosity from error to warning.

• NavigationSystem: Replaced legacy repository unregisternavrelevantobject method with UnregisterNavRelevantObjectInternal.

Bug Fix:

• Navigation:

  • Fixed a crash occurring when building navmesh on PIE ending.

  • Made a tentative fix for a crash occurring when navigation is being rebuilt because a navigation override is being removed when clearing world components.

  • Update SplineNavModifierComponent to apply the NavAreaToReplace to its modifier.

  • Guarded against zero DeltaTime in UPathFollowingComponent::FollowPathSegment to prevent division by zero ().

• NavLink Generation:

  • Fixed missing links on small navmesh patches.

  • Made a fix to avoid filtering overlapping links if they used different navigation areas.

  • Fixed automatically generated navlinks being created without the NavLinkFlag.

• NavMesh:

  • Made a tentative fix for a rare crash in storeWallSegment.

  • Fixed assertions occurring in UE::NavMesh::Private::CalculateMaxTilesCount().

  • Fix FindDistanceToWall returning incorrect result and finding a closest position that is not on a wall.

  • Fixed editor crash when a large number is typed in the Agent Radius value.

• ISMC: Fixed an ensure in UInstancedStaticMeshComponent::GetNavigationBounds() caused by invalid navigation bounds. CachedBounds were being invalidated and not being recomputed when instances were added individually.

• ZoneGraph: Fixed problem with converting FZoneGraphTag::None to FZoneGraphTagMask ().

• Fix for AsyncNavWalkingMode using stale normals.

AI Smart Objects

New:

• Added method to retrieve a Smart Object slot's UserData from the SlotView.

• Added basic MRU slots implementation for MassSmartObject with settings in Mass SmartObject section of the project settings:

  • MRUSlotsMaxCount: Possible values between 0 and 4 (default: 0, meaning that the feature is not used; up to 4 slots).

  • bUseCooldownForMRUSlots: to allow the most recently used slots to be considered again a given period of time.

  • MRUSlotsCooldown: period of time during which a given slot will not be considered after being used.

• Added all camera controls to the SmartObjectEditor toolbar

Bug Fix:

• Fixed a crash in AITask MoveTo

• Fixed an issue where the NavNodeRef was not included when requesting the slot entrance location with the option for projecting to navmesh enabled.

AI State Tree

New:

• Added a rule to remove sustained state. All reselected states are new states.

• Added Blueprint helper 'RunStateTreeRunStateTree' to execute a StateTree on an actor. Helper will use an existing StateTree component or add it if necessary.

• Added Multiply operator to the Consideration score calculation.

• Added ExecutionExtension callback when a transition is about to be applied.

Bug Fix:

• Fixed a Runtime Validation false positive error when changing state trees without running any.

• Fixed a transition that didn't remove the frame when a sub-frame changes root.

• Prevented a reentrant call into StartTree and Tick for StateTreeComponent and GameplayInteractionsContext.

• Fixed temporary frames not cleaned up when we run multiple transitions and did State selection more than once.

• State tree references can now change while the tree is not run.

• Fixed editor freezing when the user spams undo/redo operation inside State Tree Editor.

• State Tree Editor: Hide level actor picker in the state tree editor.

• Fixed property function node value not being retained in new nodes when copied/pasted/duplicated.

• Fixed property bindings not being retained in new nodes if the old bindings were removed before pasting.

• Fixed details view not always syncing correctly with the selected editor node.

• Fixed Delegate Listener being unable to bind to the nested Delegate Dispatcher.

API

New:

• Added DrawDebugCircleArc version accepting a quaternion for orienting the arc with an arbitrary roll.

Bug Fix:

• SlateIM ComboBox now properly shows its selected value when spawned.

Audio

New:

• Waveform Editor:

  • Added a noise threshold for zero crossing logic.

  • Added an inverted S fade function.

  • Streamlined the trimming workflow to have new UI handles and be enabled on opening the waveform editor.

  • Added loop, delete, and conversion options when right clicking.

  • Playback hotkey adjustments to allow move playhead to start

  • Added an icon to fade handles.

  • Made adjustments to default nudge settings.

  • Added controls to scroll left and right when zoomed using the right mouse button.

• Made memory improvements for MetaSounds in the Operator Cache.

• Added a Fade Node in MetaSound Experimental.

• Added Blueprint equality operator for MetaSound literals

• SoundWave Cue Point Origin now has improved defaults. Default origin is now the Waveform Editor Transformation Markers, unless the .wav had cue points on import.

• Added a new Virtualization Mode: Seek Restart. This mode will virtualize, but keep track of playback time and, when realized, seek to that time as if it was playing the whole time. It's a less accurate, but more performant alternative to Play When Silent.

• Performance improvements when using and destroying a large number of Quartz subscribers.

• Metasound Trigger Filter node display name is now Trigger Chance to better convey its meaning. Some of its advanced pins are now hidden by default, and the node & pins tooltips have been made clearer.

• Added "MaintainAudioSync" input to Wave Player Node as an advanced input to the Wave Player MetaSound Node.

  • "MaintainAudioSync" will compensate for latency during playback of streaming wave assets so that the playback of the audio stays in sync within the playing MetaSound.

• Added a new debug display for Audio Modulation: au.Debug.Modulation.ActiveMixes

  • This will display all currently active mixes.you can choose whether Global Control Bus Mixes are included with au.Debug.Modulation.ActiveMixes.ShowGlobalMixes

• Both experimental and legacy subtitle fields are now initialized for DialogueWaves so users can switch between them.

• Added Subharmonizer MetaSound Node to standard library.

• Added an option to only support Vorbis decoding, not encoding, for memory-constrained targets.

• Renamed the "Create Subtitle" Asset Utility action to the more-specific "Make Asset UserData from Legacy Subtitles."

• Improved extendable MetaSound node configuration editor details customization.

• Added two new features to Control Bus Mixes:

  • Control Bus Mix Timer: Set a duration on the Control Bus Mix, and it will disable itself that many seconds after activating.

  • Retrigger on Activate: Optional behavior where, when a mix is activated when it's already active, it sets the values on the CBM to its default values and starts the attack over again (like retriggering an envelope).

• Added a new Asset Action Utility that enables converting Overlay assets into subtitles in bulk.

• MetaSound presets now inherit default metadata (ex. float range/clamp) from parent graph if applicable.

• Subtitles and Closed Captions plugin:

  • Multiple Subtitles can now be added to a single SoundWave. All of them fit inside a single Asset UserData.

  • No longer queues subtitles if the engine settings for subtitles are turned off.

  • Added an Enum to Subtitle Assets to distinguish when the duration property is relevant vs when it stops automatically using a sound's length.

  • Subtitles from now have a default priority of 1.

  • Subtitles created in a SoundWave's Asset UserData will automatically estimate the length of the sound and default their duration thereto.

  • Sequences now support dragging and dropping subtitles.

  • Changed the USubtitleTextBlock class name to USubtitleWidget.

  • Added automatic subtitle playback support for DialogueWaves inside SoundCues.

  • Added a Blueprint node for queuing all the subtitles in an Asset UserData at once.

  • Added a Blueprint function for hot-swapping the Widget.

  • Added StopSubtitlesInAsset BP function.

Bug Fix:

• Waveform Editor:

  • Fixed an issue where selecting a loop region marks the soundwave dirty.

  • Fixed an issue where highlighting and saving with a loop region selected disables the rest of the soundwave playing.

  • Fixed SoundWave markers with incorrect position data on export to USoundWave.

  • Scrubber Undo Fixes

  • Fixed frame length resetting to default instead of min when sliding loop region size.

  • Fixed exported soundwaves not supporting undo transactions.

  • Fixed ensure on undoing loop deletion.

  • Fixed editor crashing when closing out a Sound Wave asset after canceling to Export Waveform.

  • Fixed undo markers triggering ensure

  • Made UI fixes for markers with positive frame length

  • Made fixes to popup clearing.

  • Fixed right click getting stuck when scrolling waveform.

• Subtitles in the Subtitles and Closed Captions plugin with delayed starts now respect internal/external timing choices.

• Subtitles from the Sequencer plugin now correctly update their visibility when scrubbing along PIE.

• Fixed crash with MetaSound user preset widget tab.

• Fixed shutdown crash on Audio Streaming Cache handle ref counting.

• Fixed a bug where, when a submix is deactivated, Modulators attached to it would still be active.

• Fixed a bug where submixes with modulators could not disable via the Auto-Disable setting.

• Fixed an issue with the Seek Restart Virtualization mode where it did not properly account for changes in pitch before virtualization.

  • When the sound virtualizes, it will use the last pitch it was set to to estimate where it should seek upon realization.

• Sound Attenuation: Fixed == operator on FSoundAttenuationSettings.

• Fixed MetaSound relative render cost being incorrectly reported in some cases when using the operator cache.

• Fixed a bug where some Modulation inheritance settings were not working in some cases for non-volume modulation on sound sources.

• Fixed MetaSound comment node positions not saving properly after resizing.

• Fixed a bug where projects with the Audio Modulation plugin disabled had logspam.

• Fixed crashes when using MetaSound node configuration with pages.

• Fixed a MetaSounds edge case when the on-done trigger is triggered mid-buffer.

• Fixed a MetaSound crash when clicking audition menu after closing asset editor

• Fixed a bug where the Chorus Source effect modulation settings did not respond to Modulation changes.

• Fixed Sine Curves on FVolumeFader when used outside [0,1] range. They should now follow the expected curve between any two values.

• Fixed a bug causing various ITD features to have an enormous delay.

Blueprint

New:

• By default the Blueprint editor no longer searches for references to variables when the variables type is changed via the blueprint editor

  • To re-enable this behavior, set "bSearchForReferencesWhenVariableTypeChanged" to true in your editor settings.

• Can now call BlueprintFunctionLibrary functions from classes that do not implement GetWorld or ShowWorldContextPin. It now always shows the pins if needed and will always connect invisible pins even if they are marked as optional.

• Added a SetFocusInViewport node to UScriptableInteractiveTool. This means scriptable tools can give focus to the viewport so that key bindings pass through without user interaction.

• The Blueprint Debug Draw Line / Point / etc. methods now have the option to draw with 'screen' depth priority.

• Added ToRotationVector, MakeFromRotationVector and GetShortestArcWith to the Kismet Math Library.

• Structs tagged as HasNativeMake can now still have their individual members set.

• Asset/Actor Actions in Developer folders show for everyone.

  • GetBlutilityClasses already had code to ensure that we don't list other devs' blutilities.

  • However, it didn't use the correct path format, which caused FPaths::IsUnderDirectory to always return false.

  • Similarly, UEditorUtilitySubsystem::HandleStartupAssets never had a similar filter to begin with.

Bug Fix:

• Fixed failure to copy instanced Blueprint component value overrides on copy/paste workflows.

• CollectionsManagerScriptingSubsystem:

  • Removed a warning from GetAssetsInCollection when an asset could not be found.

  • Fixed an issue where logs displayed as red despite actually being warnings.

• Fixed an editor crash after clicking on a deleted graph node hyperlink in the Blueprint editor's compiler results tab.

• UK2Node_VariableGet::SetPurity erroneously removed the SetPurity function from the public API of UK2Node_VariableGet. This fix now re-adds SetPurity, but changes its implementation to use TogglePurity.

• Fixed an editor crash after clicking on a deleted graph node hyperlink in the Blueprint editor's compiler results tab.

• Fixed a crash when editing children from a cooked Blueprint that had editor-only components.

• User defined structs with Text fields with non-trivial default values no longer alter themselves on load.

• The Blueprint diff tool now reports changes to Create Event Node's signature function.

• Fixed potential for ICH override template namespace collision after reparenting an Actor-based Blueprint.

• The engine no longer crashes when it exits while a search in Blueprints is ongoing.

• Added more crash report context to paths where we are failing to resolve a node's owning Blueprint and/or graph, while using an ensure to avoid crashing the editor as a result.

Blueprint Compiler

Bug Fix:

• Fixed crash in SerializeUnversionedProperties during cooking.

• Fixed crash when cooking blueprints with local object references set to objects in asset.

• Fixed compiler failing to find newly added functions on Blueprint interfaces, which led to implemented functions being renamed.

• Fixed one cause of 'Reachable Garbage' when recompiling Blueprints.

• Blueprint's delegate signature checking logic no longer accidently looks at local variables when matching function signatures.

• Fixed one cause of loss of Blueprint subobjects when a Blueprint that is contained in another Blueprint is compiled.

• Fixed a crash in garbage collection due to mislinked SKEL_ classes, most frequently seen during long-running cook operations.

Blueprint Runtime

Bug Fix:

• Fixed a bug where arrays of structs with custom identical operators could fail to copy from Blueprint generated classes correctly.

• Fixed push-model blueprint array property not properly marked dirty if modified by different actor.

  • The root cause of the issue is due to incorrect function signatures on array function thunks. Several of them mark their input array as 'const', but clearly change the array.

  • When push-model support was added, this problem was discovered and worked around by adding MARK_PROPERTY_DIRTY calls directly in the thunks. The problem with this solution is that it doesn't work when we change an array on a different actor.

  • Additionally, the thunk doesn't have enough information to determine that easily.

  • The correct solution is to leverage the existing code in FKCHandler_CallFunction that has sufficient context to inject MarkPropertyDirtyNode accurately.

  • In order to get array functions working, we needed to fix their signatures to use UPARAM(ref) instead of 'const'. One issue with this fix is that there might be existing Blueprint code that incorrectly uses mutable array functions with read-only data.

  • For now, we'll support this, but with a warning to fix the code as it'll become an error in 5.9. Currently, this warning is disabled until we fix affected content.

• Fixed a memory leak when using containers with types that allocate memory by default.

Gameplay

New:

• Mover:

  • Added a method of canceling movement features by matching gameplay tags.

  • Added User-Defined Struct support for Mover data collections, so Blueprint-only users can include custom data without requiring native code.

  • Now supports spring-based walking mode work in networked play.

  • Reduced potential memory operations when adding to a data collection by preferring to copy onto an existing matching struct if possible.

  • Added options for supporting root motion for non-vertical moves, which makes possible combining them with gravity-based falling.

  • Added a double buffer for cached sync state to avoid issues with reading in data that may be freed/overwritten.

  • Added Mover-Mass translators along with a Mover Integrations plugin to house various integrations between Mover and other systems.

  • NavWalking mode now sets floor results in the Mover Blackboard when projecting to level geometry is enabled.

  • Added an auto-expire policy option for rollback blackboard entries.

  • Added support for blueprintable layered moves through a new system that splits up Layered Move Logic and Data.

    • This allows Layered Move Logic to be made natively and in Blueprints in an effort to expand blueprint support in Mover.

    • These new layered moves exist alongside the old ones at the moment with the intention of these new moves eventually replacing the old ones.

  • Added options for handling out-of-band movement changes, whether to warn about it and whether to accept it as the new starting sim state. Usage is primarily for non-networked play, where an external system is allowed to move the actor around, such as during cinematics or temporary physics simulation.

  • Converted absolute timesteps to double-precision.

  • Now supports avoiding state-copying operations when the simulation state doesn't change.

  • Added AdditiveVelocity MixMode support to MultiJump Layered Move.

  • Made small adjustments to the extended Mover pawn to make sure additive velocity is respected by turning off extra jump input from CharacterMoverComponent Jump.

  • Added option for flat-bottom floor checks.

  • Added consistent angular velocity when changing movement modes.

  • Adjusted mover API to use a FVector for angular velocity instead of a FRotator. This changes some public API related to Mover.

  • Removed the gravity orientation from angular velocity calculation.

  • Added simple montage replication support for the character-focused MoverComponent.

  • Added first version of rollback-aware blackboard.

  • Added experimental option to append inputs into sync state, for cases where you want to share inputs with sim proxies that are not simulated and may not have those inputs available.

  • Made MoveInput and MoveInputType BlueprintReadOnly, so setting this input is done through specific functions only. This means we can properly apply some precision to input to make sure all clients/server have same value after NetSerialization.

• Cameras:

  • Added Blueprint getter nodes for camera rig parameters.

  • Added evaluation context to transition conditions' API.

  • Now shows the name of the camera rig on the rig prefab node.

  • Added more debug information for blend stacks.

  • Added ResolveCameraRigProxy method to Blueprint camera director.

  • Moved lens calibration camera node to the CameraCalibrationCore plugin

  • Some changes to input slots:

    • Now runs input nodes in OnRun. OnUpdateParameters is only meant for pre-blending input parameters, not running actual logic, if only because it is run in isolation on just a few nodes that opt-in.

    • Moved the revert axis options onto the base input slot class.

    • Added a speed option on the input slot class. Pre-blend that instead of pre-blending the actual player input.

    • Moved the user-exposed option for accumulation onto the axis-binding specific node, in preparation of adding an actual accumulation node for more complex input chains.

    • Moved axis-binding code to a helper class in preparation of a "raw" input action node.

  • Added raw input action and accumulator node for complex input chains.

  • Added "driven control rotation" input node:

    • This input node makes possible using a "centralized" player input system which drives control rotation on the pawn, while still enabling cameras to have different orientations, such as when using target preservation with various lateral offsets (and therefore parallax requiring converging cameras with different orientations).

    • The active camera rig uses control rotation as-is, but any blending-out camera rigs use their last control rotation driven by the "delta" control rotation each frame.

    • This seems to be a good compromise between cameras limited by a single orientation and having player input managed by camera rigs individually.

  • Added the GetPlayerController method on the Blueprint camera node evaluator.

  • Added an option on camera components to set control rotation.

  • Added the ability for the Camera Debugger panel to bind to specific camera system instances (for instance, picking which Gameplay Camera actor to debug).

  • When drag-and-dropping a camera or camera rig asset onto a level or a sequence, create the corresponding actor.

  • Camera rig parameters now default to not pre-blended.

    • Defaulting to pre-blended benefited a few cases, but also caused visual bugs in a couple of other cases, so it's not worth turning it on by default.

  • Moved persistent rig activation functions onto the camera components and the camera manager.

    • These Blueprint functions were previously global, affecting whatever camera system host was currently considered "active".

    • This turns out to be unclear and prone to errors. Now the user activates persistent rigs exactly on whatever they intend to.

  • Now auto-create camera rigs and assets when nothing is specified on a Gameplay Camera component (but log a warning).

  • Made the orientation initialization service available to 3rd parties, and added an API for overriding the target or yaw/pitch to preserve.

  • Added a Blueprint utility function to access the evaluated camera's orientation.

    • Added Teardown API for node evaluators, added layer and active camera rig information.

    • Made node evaluator and evaluation service flags inclusive by default (i.e. opt-out).

    • Added a new "initialize with ideal framing" option on screen-space framing nodes.

  • Added a "family shortcut" bar to various camera asset editors for helping navigate between related assets.

  • Users can now set variables to be pre-blended.

  • Made QoL improvements to the Blueprint camera node.

  • Added bone/socket options to the attach to player pawn node.

  • Improved advanced camera shakes (add shake instance IDs and the ability to interrupt and stop a shake), improved the internal API for implementing shake nodes, and fixed a few bugs.

  • Implemented a more proper auto-build for camera assets for PIE.

• GAS:

  • Improved logging for missing attributes in FActiveGameplayEffectHandle when using GetGameplayEffectMagnitude.

  • Gameplay Tag display ends in an ellipsis when the display is cut off rather than overflowing.

  • Gameplay Tag and Tag Container meta data "DisplayShortTagNames" will now remove the Categories filter from the beginning of the Tag chip in the details panel.

  • Gameplay Effects stacking options now have better names and comments.

  • CooldownGameplayEffectClass validation: When a GameplayAbility is configured with a cooldown GE class, validation will check whether that GE applies any tags.

  • Updated the GameplayTagCountContainer to serialize tags itself and provide for fine control of what tags should replicate where via EGameplayTagReplicationState enum.

  • Exposing common GameplayEffectSpecHandle and ActiveGameplayEffectHandle queries to Blueprint. The following Blueprint callable functions have been added to AbilitySystemBlueprintLibrary to empower Blueprint programmers when making GameplayAbilities. Since some GameplayAbilityTask callbacks only provide a GE spec handle and/or active GE handle, now you can do more with those handles:

    • GetGrantedTags: Gets gameplay tags granted by a Gameplay Effect, from the effect's spec handle.

    • GetAssetTags: Gets gameplay tags describing the GameplayEffect, from the effect's spec handle.

    • GetGameplayEffectFromSpecHandleIsDurationGameplayEffectSpecHandle: Whether a GameplayEffect is instant or non-instant.

    • IsActiveGameplayEffectHandleValid: Whether a handle for an active GameplayEffect is a valid handle or not. Applied instant GEs don't result in an active handle.

    • IsActiveGameplayEffectHandleActive: Whether a handle for an active GameplayEffect is a valid handle and it's still applied.

    • GetAbilitySystemComponentFromActiveGameplayEffectHandle: Retrieving the AbilitySystemComponent from an active GE handle.

  • Renaming a gameplay tag in the Gameplay Tag Manager now automatically renames all sub tags.

  • Added predictive gameplay effect stacking and improved stack overflow handling.

• The data validation error for when there is a null input trigger on a key mapping now includes the name of the input action which it is mapped to.

• You can now call "SetShouldConsume" on any Enhanced Input bound action handles.

  • You can also define "ENHANCED_INPUT_ALLOW_LEGACY_BINDING" in your game's .build.cs file to enable legacy key bindings onto enhanced input components, making upgrading to enhanced input easier.

• Added GetActorFilter UPROPERTY meta support to object picker (mirroring GetAssetFilter).

• Added a virtual function to UBlueprint, ShouldAutomaticallyRegisterInputOnConstruction, which can be overridden in widget blueprints.

• Added a set of deprecated input action/axis names in the project settings.

• Added "Setter=SetShowMouseCursor" to APlayerController::bShowMouseCursor.

• Added ReleaseGameFeaturePlugins for multiple plugins at once. Unloading plugins batches GC and GameplayTags tree changes together which improves performance of unloading operation

• Added an editor preference for setting a "Simulated Device Mapping Policy".

  • This can be used in the editor to change how input devices get mapped to platform users, which can be useful for testing device connection sequences for your UI, log in flows, etc.

  • Added the current device mapping policy to the output of the "Input.LogAllConnectedDevices" command.

• Added helper functions to Ability system library: HasAnyAbilitiesWithCondition and HasAnyAbilitiesWithAssetTag

• Added QueueWorkFunction and SendQueuedWork to the TaskSyncManager which can be used to queue a batch of function pointers to execute as a simple tick task. This can be used with RegisterTickGroupWorkHandle to safely schedule batched gameplay thread work from any worker thread.

• Calling GetDeviceSpecificData now uses the given input device ID. If that is invalid, it uses the platform user's most recent device.

• Added LoadGameIfExistsAsync to SaveGameSystem which combines the exists and load checks into one async call to avoid an extra frame delay. Changed GameplayStatics to use this for async loads which fixes a warning when trying to load a nonexistent save game.

• Added ensure and comments to prevent creation of registered FTickableGameObjects on worker threads which is an unsafe race condition.

• Added an option to the FTickableGameObject constructor to enable creating with a disabled tick, which is safe on a worker thread.

• Added bindable "virtual" accept and back FKeys.

• Added a OnPostUserSettingsInitialized delegate to Enhanced Input, which will fire after the Enhanced Input User Settings have been initialized on the subsystem.

• Added more ways to detect a local player subsystem when using the node which does not have an explicit player controller target pin.

• Implemented SlideAlongNavMesh option for CMC NavWalking mode. This means pawns in NavWalking mode can move along a navmesh rather than just moving towards a projected point on the navmesh.

• CineCamera: Added an option to disable dynamic exposure.

  • Previously, turning off depth-of-field with FocusMethod would also turn off exposure simulation. This was fixed recently, but also meant that CineCameraComponent would now always simulate exposure, which isn't always desirable.

  • This change adds a new ExposureMethod setting to allow disabling exposure too.

• Made sure that the key mappings "supported key profile" tag is respected, and made the OnKeyProfileChanged delegate Blueprint assignable.

• Fixed a race condition crash on shutdown of the SteamController plugin.

• Added an "Input.LogAllConnectedDevices" command to dump all the currently connected input devices and some metadata about them to the logs.

• Reduced mouse input overhead on Windows by processing raw mouse moves on a separate FRunnable thread in the WindowsApplication..

• GameplayTags and GameplayTagContainers created in Blueprint give the user a way to edit the "Categories" metadata for tag filtering in the owning Blueprint.

• Fixed a crash where UPlayerInput::SmoothMouse would assert before it would attempt to divide by zero.

Bug Fix:

• Mover:

  • Fixed a bug in mover angular velocity clamping where the limit was not respected when rotating off axis

  • Added CommonLegacyMovementSettings shared settings in various movement modes to avoid a crash that could happen if they were the only mode added.

  • Fixed an issue where pawns wouldn't follow a navlink off the navmesh if bSlideAlongNavMeshEdge was true.

  • Nav walking modes now force a navmesh projection if something comes along and invalidates our last floor information, such as teleportation.

  • Now initialize the Mover mode state machine earlier so it can be used in backend initialization if desired

  • Fixed NaN issue in UMovementUtils::ComputeVelocity that could happen when MoveDirectionIntent was zeroed out.

  • Fixed issue where backends could leave stale non-persistent structs in sync state between frames.

  • Fixed several cases where strict equality checks on orientations could fail due to float point imprecision.

  • Fixed an issue where a specified InputProducer could fail to have ProduceInput called on it.

  • Fixed a Blueprint editor crash during validation if there's a shared settings object set to None.

  • Fixed issues with trying to maintain the small distance off of floors in falling/flying modes where a character could get pulled towards the floor.

  • Fixed improperly calculated angular velocity for mutli-axis rotation cases, and added utility function to compute it.

  • Fixed a bug in standalone mode where the time step was being rounded down to the nearest whole millisecond.

  • Fixed floating point precision error in mover's fixed delta time calculation.

  • Finding a movement modifier by handle and by type now searches through the queued modifiers on the Mover State Machine as well. Fixes an issue where modifiers weren't found immediately after queuing them.

  • Fixed local->world root motion conversions when non-yaw rotations are involved.

  • Fixed cases where some movement modes were not respecting the setting for remaining vertical.

  • Fixed bugs where an actor can violate the min/max distance it's supposed to float above walkable floors.

  • Made sure we use BaseVisualComponentTransform to update PrimaryVisualComponent transform in FinalizeFrame so changes to BaseVisualComponentTransform apply to the visual component regardless of whether we're smoothing state or not.

  • Now properly expose Movement Mode in-out references in GenerateMove and SimulationTick to Blueprint.

  • Searching modifiers by handle with an invalid handle will return nullptr rather than active modifiers with invalid handles that haven't been fixed up yet.

  • Now passing along starting velocity in Falling modes if we didn't use any time. This fixes some velocity cancellation that sometimes causes a stutter on landing.

• Cameras:

  • Fixed main camera assets not being usable as Blueprint variables.

  • Fixed crashes and bugs with rewind debugger integration.

  • Improve debug info display with extra data, more filtering options, and a few other things.

  • Fixed single-rig updates missing some of the steps the blend stack does.

  • Fixed static initialization problems that can lead to debug blocks not saving their fields in trace files.

  • No longer freezes camera rigs during stateless evaluations.

  • No longer warns about a camera asset not using any rigs if it's using proxies, and builds any rigs in the proxy table.

  • Fixed a crash when a camera's enter or exit transitions have empty pins.

  • Fixed an incorrect reset-to-default behavior on the camera parameter editor UI.

  • Now prevents infinite recursion when there's a cyclic reference of camera rigs.

  • Fixed gameplay tag transition condition; when a tag query is specified, it should fail if there is no previous/next camera rig.

  • Normalized yaw/pitch for spline orbit node

  • Can now run the target ray-cast node when there's no player controller.

  • Can now build and run camera rigs and shakes with no root node.

  • Now prevent rig prefab nodes referencing their own camera rig.

  • No longer throws asserts or error messages when we have a camera actor without an asset specified on it

  • Fixed activating persistent rigs during director initialization, and having these rigs receive custom parameter overrides.

  • Now validates that exposed camera rig parameters have the correct type for what they're connected to.

  • Fixed possible crash in GPC camera manager when the last evaluation context is removed from the stack.

  • No longer updates dampers and interpolators when the delta-time is zero.

  • Now properly freeze blends (possibly mid-blending) when freezing a camera rig in a blend stack.

  • Fixed simple fixed-time blends not saving/restoring their current time.

  • Fixed a crash when changing the type of a camera rig parameter.

  • No longer shows byte/int types for data parameters.

  • Now resolves camera rig name conflicts when building the property bag for a camera asset.

  • Fixed camera rig parameter nodes not being added to the list of graph objects.

  • Fixed assert when adding an enum data parameter to a camera rig.

  • Fixed broken "inline" evaluation of camera shake prefabs.

  • No longer pre-blends camera variable table entries that are not flagged for it.

  • Fixed the tick group for the camera components.

  • Fixed a crash when running editor builds without an editor.

  • Added missing initialization call for blend nodes in merged camera rigs.

  • The camera reference widget is now disabled if overridden with a rig parameter.

  • Fixed a crash when connecting a camera variable reference to a camera rig parameter.

  • Fixed an issue where rigs could keep running with old data after their asset was rebuilt.

  • Fixed "Home" button in camera rig editor.

  • Deleted references to camera variables when a variable collection is deleted.

  • Fixed a possible crash when running with unbuilt or outdated rigs.

  • Fixed Blueprint breakpoints not working on GET/SET parameter nodes.

  • Fixed shake prefab node not passing shake parameter values over to the visual layer in deferred mode.

  • Fixed SET parameters nodes not setting anything if the parameter wasn't already known in the variable/data tables.

  • Fixed error messages for unexpected situations lerping/overriding variable tables.

  • Fixed variable and context data tables sometimes returning uninitialized memory, and replace assert with one-time warning.

  • No longer uses manual focus distance on the output camera component if the focus distance isn't set.

  • Fixed pin types and colors for some data parameters.

  • Fixed incorrect parameter/pin types on the Blueprint camera node for object and class pointers.

  • Camera modifier rigs added from the player camera manager should now be aware of the player controller.

  • Added fixes for the player camera manager:

    • No longer double-updates Gameplay Camera actors

    • Now run the vanilla (Blueprint-based) camera modifiers ourselves after the camera system.

    • Now sets the transform of the camera manager itself to where the final viewpoint is.

• GAS:

  • Consolidated code that checks whether an AttributeSet's FProperty represents a gameplay attribute, and improved coverage and stability:

    • FGameplayAttribute details customization dropdown will only show attribute set properties that represent GameplayAttributes. Previously it showed all properties.

    • GameplayDebugger will now also display doubles. Doubles as FGameplayAttributes remain supported for legacy reasons.

    • Fixed GameplayDebugger crash when an UAttributeSet had any int32 UPROPERTY().UAttributeSet::InitFromMetaDataTable now only processes property types that can back gameplay attributes.

  • Fixed a crash when debugging gameplay effects with aggregate by source stacks.

  • Fixed an issue where SetTagMapCount didn't call OnTagUpdated like the other tag update functions. This will now be called when Gameplay Cue tags and Loose Tags are added and removed (No change for changing values that don't add or remove the tag).

  • Fixed target data recalculating source tags and attributes when applying Effect Spec.

  • GameInstance pointer for Async Actions is correctly reset after it is un-registered.

• Network Prediction: Changed static initialization of FNetworkPredictionModelDefRegistry's singleton to avoid issues with static initialization happening out of order causing registered Network Prediction model definitions to be skipped/removed. Also, made some minor adjustments to FNetworkPredictionModelDefRegistry::FinalizeTypes to avoid potential ODR issues.

• Fixed an error in ULocalPlayerSaveGame::IsSaveInProgress where it always returned true even if one was not in progress.

• Added an ensure to protect against missing player state crashes during seamless travel.

• Map placed actor Event Dispatcher duplicates:

  • A map placed Blueprint actor's bindings to another map placed actor's multicast delegates (including Event Dispatchers) are now cleaned up when the actor is destroyed and reinstanced.

  • This fixes a bug that bindings to other actors' multicast delegates accumulate when recompiling an actor blueprint. Previously this resulted in event nodes firing multiple times, increasingly when the Blueprint is recompiled.

• Now return the playercontroller if found from the owner.

• Network Prediction: fixed crash in smoothing service that could occur after adding more simulation objects during runtime

• Fixed replication issue canceling Gameplay Abilities when destroying the ASC from the server while abilities are active.

• Fixed Multiply (Compound) modifiers not calculating correctly with stacked GameplayEffects.

• Prevented a crash in APlayerCameraManager when the owning player controller has been GC'ed.

• Input triggers and modifiers will now properly respect the priority of an input mapping context. This fixes a bug where if you had the same input modifier class on an input mapping context of a different priority, it would always use the modifier values of the one which was pushed to the stack first.

• Fixed code that removes ?listen from client URLs to work correctly with # options as well.

• Ensured that the "SlateApp.GetModifierKeys" function will return the correct values when called on platforms using GameInput to process keyboards.

• Fixed OnBlendComplete not being broadcast in Standalone (non-networked) games.

• Find-in-Blueprints: When a BP member variable is a struct, its members' default values are now searched and returned as results. Map keys are not supported yet.

• Chaos Mover: Fixed floating point precision error in ChaosMoverStateMachines's fixed delta time calculation.

• No longer restarts a camera animation blend out when reaching the blend out time if we were already stopping.

• Fixed DefaultToInstanced subobjects breaking on blueprint duplication.

  • Fixed instanced subobjects, including DefaultToInstanced classes and UPROPERTY(Instanced), breaking when a blueprint class with instanced subobjects got duplicated.

  • This fixes the following editor actions which previously resulted in data loss:

    • Duplicating blueprints with user defined instanced subobjects.

    • Duplicating blueprints with GAS attribute set DefaultSubobjects.

• Player Input: Fixed a bug where if you had an input component whose outer was a subobject of the currently controlled pawn, the input component would be processed twice.

  • One example where this could be a common issue is within the "Modular Gameplay Framework". Users would add a UInputComponent to some UActorComponent, and then call "PushInputComponent" on the owning player controller. This would result in the UInputComponent being processed twice.

  • This would happen because in "APlayerController::BuildInputStack" it calls "GetComponents" on the controlled pawn, which would return the UInputComponent which had already been pushed to the controller's input stack, thus adding it twice to the stack for processing.

• Enhanced Input: Do not load platform-specific override data on post load of the platform settings. If you are referencing an object that is in a plugin, this will just fail anyway and does not improve any sort of loading behavior.

• Fixed an incorrect Deleter being used on FGameplayAbilityTargetData when calling FilterTargetData, and exposed FGameplayAbilityTargetDataDeleter for this purpose.

  • Use this deleter when creating an FGameplayAbilityTargetData using FMalloc, such as in UAbilitySystemBlueprintLibrary::FilterTargetData.

  • When creating TSharedPtr to FGameplayAbilityTargetData which was created with FMemory::Malloc, please use the FGameplayAbilityTargetDataDeleter

Deprecated:

• Deprecated the "Speech Mappings". These speech mappings were originally added to support Hololens, which is no longer a supported platform and can be removed.

• Removed the deprecated functions on the camera manager, GetCameraCachePOV and GetLastFrameCameraCachePOV.

• GAS: Deprecated StackType to make it private in the future, use new accessors instead.

Mass

New:

• Added time-slicing with FMassEntityQuery::FExecutionLimiter to limit execution to a set entity count.

• Added a Mass command for grouping entities.

• Mass Debugger:

  • Added "Open In Query Editor" button to all query displays in the debugger.

  • Added handle-based sorting of entities on the Entities tab.

  • Completely overhauled breakpoints with new types, filtering, hit counters, session to session persistence, copy-paste.

  • Added query editor UI with load/save and copy/paste support for authored queries.

  • Added Fragments view tab.

  • Added new "Selected Entity" breakpoint filter to break for whichever entity is selected in the gameplay debugger or debug UI.

• FMassFragmentRequirements and FMassEntityQuery are no longer UStructs, which they were never supposed to be.

• Added observers locking to commands flushing. This change results in batching observers calls, significantly reducing the number of individual observers executions (~20 times in CitySample).

• Added MassQueryExecutor to unify the functions of MassQuery and MassProcessor and create a foundation to remove dependency on UObjects for Mass processing in the future.

  • Simplified Mass data access with templated UE::Mass:FAccessors collection.

• Added a way to fetch base-typed fragment views from Execution context while providing the actual, specific class with a UScriptStruct pointer.

• CFragment concept now checks whether types are std::is_trivially_copyable and if not emits errors requiring users to manually mark fragment types that are not trivially copyable.

  • The goal is to educate fragment creators about good practices and point out fragments that might accidentally violate the requirement.

• Deprecated FMassBatchedCommand::Execute as a const function and introduced non-const replacement named `Run`.

  • Unfortunately a new name had to be introduced since the constness of the function is the only thing that's changing.

  • Added a temporary construct to MassCommandBuffer to statically detect commands that still implement the deprecated virtual Execute in an attempt to make it easier for people updating their code to notice the change.

  • The construct will check at compile time all the pushed commands of known types and statically assert if the command type still overrides the deprecated `Execute` function.

• Entity Builder API extension, supporting use of an arbitrary "element" type and having the builder figure out what kind of an element that is and store it appropriately. Additional changes:

  • Fixed FEntityBuilder::AddInternal implementation to not add duplicated instances of a given element type if one is already present.

  • Added creation context to the deferred path, to ensure the fragment values are already set when the observers kick in. This was already done in the synchronous path, so this change addresses the inconsistency

• Added a couple of functions to MassEntityManager, that deal with types passed in as UScriptStruct, and pass the argument to the appropriate function, based on the type (Tag or Fragment).

• Mass Command Buffer API extension:

  • PushUniqueCommand: the function lets callers add a hand-crafted command. Use it to push commands that you don't want to get merged with other commands of the same type.

  • AddTag and RemoveTag: added versions that take an array view of entity handles.

  • DestroyEntities: Added a version with rvalue ref parameter.

• Added FMassFragmentRequirements::AddElementRequirement that can be called at runtime with UScriptStruct.

  • It will add the provided type to Fragment or Tag bitsets, depending on the type represented.

• Added FMassRepresentationParameters::Identical to implement logically-correct FMassRepresentationParameters instances comparison. The operation by design ignores CachedDefaultRepresentationType and CachedRepresentationActorManagement.

• Added a way to ask a MassCommandBuffer about its host thread.

• UMassVisualizationTrait can now be configured to not check mesh descriptions for validity which can be used to procedurally populate trait instances.

Bug Fix:

• Fixed inconsistencies between single and multi-threaded deferred command flushing in FMassProcessingPhase::ExecuteTick.

• Modified the occasionally failing ensure condition in UInstancedActorsData::OnInstancedActorDestroyed and provided it with more comments and a message to emit.

• Properly handle shared fragment hash collisions.

• Mass puppet actors now get destroyed immediately when the puppet is destroyed.

• Fixed configuration issues of FMassProcessingContext created in UMassSpawnerSubsystem::DoSpawning for running initializer processors.

  • The original configuration was flushing commands if any have been issued, but did so in a way that forced flushing of all the system's commands accumulated up until that point. That resulted in different behavior in entity spawning depending on whether there were initializers for a given entity available or not.

  • The new configuration results in keeping the behavior consistent, regardless of initializers presence, which is to not flush commands and if any are issued they will be appended to the main buffer when FMassProcessingContext goes out of scope.

• MassGameplay:

  • Fixed a crash when a mass representation actor is destroyed while mass simulation is active.

  • Fixed a teardown crash in MassAgentComponent.

  • Fixed a situational crash in UMassRepresentationSubsystem on world teardown.

• MassAgentComponent changes to update EntityHandle-to-actor mapping in MassActorSubsystem when dealing with a player-owned component.

  • The change fixes an issue with GameplayDebugger's Mass category not being able to display info on the player-owned entity. A tiny change to the category removes the friction when doing that (no longer requiring the transform fragment to display data).

• Fixed an issue in FMassEntityQuery::ParallelForEachEntityChunk stemming from the code not taking into consideration that ParallelForEach's workers can be moved between threads.

  • If that happened and the query was run with `bAllowParallelCommands == true`, then the command buffer would complain about being used outside of the thread of its creation. The fix is updating the thread ID of the command buffer whenever it's picked up.

• Now sorting observer processors to utilize UMassProcessor.ExecutionPriority.

• Fixed FarmTest to not crash on PIE:

  • The existing implementation is crashing since the changes to processor initialization have not been applied there.

  • This issue is limited to the farm-test, due to the custom and legacy way of setting up and running processors.

• Fixed standalone-game IA uses by properly talking to ServerInstancedActorsSpawnerSubsystem, which fixes some IA representation issues.

  • Also, ServerInstancedActorsSpawnerSubsystem has been fixed to `FinishSpawning` actors only once their IAComponent has been configured.

• Marked UMassCapsuleTransformToMassTranslator as "game-thread only" to avoid data races when the observed component is modified in game thread as the data is being accessed by the processor.

Networking

New:

• Implemented RPC state stomp detection which can detect state buffer writes between quantization and serialization. The cvar to control this is net.Iris.RPC.ServerStompDetectionEnabled which is false by default.

• Support Iris when using NMT_JoinNoPawn and NMT_JoinNoPawnSplit.

• Adding an FSocket::ReleaseNativeSocket for use with native socket API's (e.g. asio). Using this new function inside the TraceAnalysis' FDirectSocketStream to support cases where we want multiple connections, not just a single connection (e.g. a multi-server capture).

• Iris

  • Implemented seamless travel support. If seamless travel support is not needed for a project the cvar net.Iris.AlwaysCreateLevelFilteringGroupsForPersistentLevels can be set to false to avoid unnecessary overhead of filtering objects in the persistent level.

  • Optimized polling to only poll objects/properties that are marked dirty.

  • Added some async loading failure debugging cvars:

    • net.Iris.AsyncLoading.FailPackageName Name: fails async loading all packages containing the package name.

    • net.Iris.AsyncLoading.FailNextLoad 1: fails the next async load regardless of the name and resets the cvar.

    • net.Iris.AsyncLoading.FailAllLoads 1: fails all loads until the cvar is set to 0.

  • Gracefully handle reaching the end of the bitstream even if it's unexpected. The behavior is controlled via cvar net.Iris.ReplicationReader.GracefullyHandleReachingEndOfBitstream.

  • Added better logging when handling end of bitstream issues. Reset the read journal when deserializing huge objects.

• Added a NetDriver command for printing out all of the actors registered for replication (generic replication system only).

• NetEmulation:

  • Added netEmulation setting to simulate buffer bloat on game traffic.

  • Set PktBufferBloatInMS for outgoing packets and PktIncomingBufferBloatInMS for incoming packets.

    • Ex: 'netEmulatation.PktBufferBloatInMS 1000' will apply 1sec of buffer bloat on outgoing traffic.

  • netEmulation.BufferBloatCooldownTimeInMS can also be used to set a cooldown period between each buffer bloat occurence.

    • Ex: 'netEmulation.BufferBloatCooldownTimeInMS 2000' means buffer bloat is not applied for 2secs after a buffer flush.

  • Added a "BufferBloat" emulation profile that enables buffer bloat of 400ms (in and out) over an 'average' emulation profile.

• Added metrics to measure the performance and behavior of the multiserver proxy.

• Multithreaded Iris Polling Step:

  • FObjectPoller can now kick off multiple FReplicationPollTasks, each of which processes a subset of the ObjectsConsideredForPolling array.

  • This is set to process cache line sized Chunks in an interleaved pattern so that each task gets a roughly balanced amount of work, and we avoid false sharing the same cache line.

  • Also supports the ForcePoll flow if PushModel is disabled.

  • Added NetBitArray ForAllSetBitsInRange function to facilitate iterating over different parts of the same Array inside each task.

  • FNetTypeStats now supports threaded access through the use of ChildNetStatsContexts that are used during parallel phases and then accumulated into the parent context at the end of a frame.

  • Configuration is done at the ReplicationSystem level so that we can enable it just for GameNetDriver on the Server.

  • We define a flag called bIsInParallelPhase which is true whilst the FReplicationPollTasks are running, and is used to protect against non-thread-safe access during this time.

  • Added capability for Networking Iris Polling phase to be run in parallel. This can be enabled by adding bAllowParallelTasks=true to the ReplicationSystemConfig

• MultiServer:

  • Refactored LaunchMultiServer script. Users can now derive from it to add their own features.

  • The -ProxyGameServers command-line argument can now accept a port range. This helps with launching multiple servers on a single host, so you can just use 127.0.0.1:9001-9025 for 25 servers.

• RemoteObjects: Now reschedules aborted ServerReplicateActor calls rather than retrying them.

• Fixed an issue where UActorChannel::ReplicateActor did not account written bits in one of the paths

• Renamed RepNotifies CSV stat to Generic_RepNotifies to better distinguish between Actor Channel based replication (generic) and Iris replication.

• Added support for closing child connections in the net driver and closing connections on the multiserver proxy.

• Added mutators to UNetworkMetricsDatabase functionality.

  • Mutators can be added to UNetworkMetricsBaseListener and get a chance to process input metrics every frame. They report an output metric to their owning listener on the listener's reporting interval.

  • Use mutators to aggregate metrics that are set more frequently than a listener's reporting interval. Basic mutators for min, max, and average are provided.

  • Added server-side network metrics for RawPing values across all client connections.

• Added support for actor replication relevancy when using the multiserver proxy.

• The multiserver proxy now shares a single NetGUID cache and objects are cached on the proxy when migrating between servers.

Bug Fix:

• Fixed a crash which could occur if an actor channel was removed during replay playback scrubbing.

• Iris:

  • Fixed bug with FastArraySerialzierFragment if using not replicating items.

  • Fixed bug where FGameplayAbilityTargetingLocationInfoNetSerializer would not properly call FreeDynamicState.

  • Fixed bug that could prevent a default subobject from receiving a large RPC.

  • Fix edge case with prioritization causing a crash.

  • Fixed issue where dirty status of new subobjects created from PreUpdate of objects was masked out.

  • Now resets NetBitStreamReader between batches to get correct read journal entries and clear overflow status.

  • ObjectProperty class type is now validated property when serializing object references.

  • Fixed a bug where initial state was not applied when beginplay() was dispatched for world from AGameStateBase::OnRep_ReplicatedHasBegunPlay.

  • Fixed a bug that allowed adding subobjects to torn off root objects.

  • FScriptInterfaceNetSerializer can now handle blueprint implemented interfaces.

  • The ObjectReplicationBridge's AddDependentObject method will now prevent circular dependencies.

  • Fixed bitstream corruption that could lead to disconnects.

• Can now pass zero size to FNetBitStreamWriter's InitBytes method.

• Network:

  • Added UE_FAST_ARRAY_COMPILE_LOG_LEVEL that enables a program to control the compile time verbosity of LogNetFastTArray logs.

  • Since this class is templated the logs in the functions are unique per implemented class so it can grow the amount of the log static strings if they are left compiled-in.

• Fixed issue with FObjectReplicator's CanSkipUpdate with net.PushModelSkipUndirtiedReplication enabled.

• Made a change in UNetDriver::IsLevelInitializedForActor to avoid iterating over net connections if the actor we are evaluating has the correct world, or if the actor it is not a player controller

• NetDriver:

  • Fixed ping updates discarding higher ping values when multiple Acks were received in one packet.

  • For example this caused ping values to stay low during BufferFloat occurrences.

  • Added RawPing metric that tracks the highest ping value received every frame.

  • RawPing will not change if no packets are received or the incoming packets contain no new Acks.

• When using Iris replication, objects that have a spatial filter set at runtime will now always use their correct location for filtering calculations.

• When using Iris replication, actors and subclasses without explicit FilterConfig overrides in ObjectReplicationBridgeConfig will now be filtered based on their relevancy flags like bAlwaysRelevant.

  • Previously these actors were treated as always relevant regardless of their bAlwaysRelevant flag.

Deprecated:

• Removed error prone SetConnectionFilter API from UReplicationSystem. Use exclusion groups instead.

• Deleted UNopNetObjectFilter. It's been superseded by UAlwaysRelevantNetObjectFilter which has identical functionality.

• Deprecated GetSubobjectsWithStableNamesForNetworking function

Level Design and Art Tools

Geometry Core

New:

• We now use the fast cluster simplifier for convex decomposition's pre-pass simplifier (since the main use case is to make the decomposition faster).

• Geometry Core: Added morph target attribute as a core dynamic mesh vertex attribute.

• Added path intersection & difference.

• Added a ReparameterizedCloserToWorldFrame to the GeometryCore TOrientedBox3 class.

• Added a CreatePerVertex method to dynamic mesh overlays, as a faster alternative to the CreateFromPredicate() method in the per-vertex case.

• Added a vertex -> single triangle method to dynamic mesh, as a faster/more-convenient path (vs e.g. using a vertex->triangles iterator to get a single element).

• FDynamicMesh3 queries now optionally take an inline-allocated array for local vertex-neighborhood mesh queries.

• Added optional scale factor to DynamicMeshUVEditor::ScaleUVAreaTo3DArea utility function.

• Added option for geometrycore's MeshBoolean to report the source mesh of each result triangle.

• Added option for the Mesh Boolean to take a custom 'inside mesh' function, per mesh.

• [GeometryCore] Delaunay 2D iterative update support.

• Added a version of Expand() to FAxisAlignedBox3 and FAxisAlignedBox2 that takes a vector.

• Segment Tree: - add option to build the tree with an array of segments - make use of the filter function that's passed in as an option.

Bug Fix:

• We now reset the UsedCount on a moved-from RefCountVector, so it is left in a valid state (and e.g. a mesh will not fail CheckValidity after being moved from).

• Made the implicit morphology generator not hit an ensure() when passed an empty mesh (and still return an empty result).

• Fixed the dynamic mesh color transfer method handling of non-compact meshes when biasing element positions, and simplified the lerp-toward-centroid logic used.

• Fixed static mesh's LOD -> dynamic mesh conversion handling of non-compact polygon group IDs

  • We need to compact these IDs so that they correspond to static mesh section indices, which all our tools and geometry script processing expect.

• Improved performance of MeshRegionGraph operations:

  • Region merging transfers known neighbor information, rather than recomputing it.

  • Less redundant validation on internal operations.

  • Less redundant array searching when building neighbors.

• Added api exports to the OBJMeshUtil methods so they can be called from other modules.

• Made MeshConvexHull's grid sampler exit when mesh bounds are empty, to avoid ensures on grid w/ zero cell size.

• Fixed dynamic mesh CompactInPlace creating a triple-sized TriangleEdges array + add coverage for this case in CheckValidity, and guard against this kind of error breaking AppendWithOffsets.

• We now do not leave unused vertices in the cluster simplifier mesh result mesh.

• Fixed incorrect transforms on GeometryCollectionToDynamicMesh converter, and added more comments to document the expected coordinate spaces for these meshes.

• Fixed crash in implicit morphology offset operation due to offset grid dimensions overflowing int32.

• Fixed a possible crash in algorithms that use the sparse solver wrapper, by properly handling failed factorizations.

Geometry Script

New:

• Added various oriented box functions to geometry script, to create and query / test intersections and convert to meshes.

• Added an OBB containment function to geometry script (matching what simple collision fitting does, but exposing the found oriented box directly).

• Improved geometry script's CopyCollisionMeshesFromObject support for complex collision.

  • It now supports any type that implements the IInterface_CollisionDataProvider interface, and specifically should now work better with Skeletal Mesh Components and Spline Mesh Components.

• Added a 'select occluded from outside view' jacketing method to geometry script, to have more controllable occlusion operations (e.g. from specific directions, for specific material IDs/parts of mesh, w/ transparent tris).

  • Also, cleaned up the detect exterior visibility function logic to support the new options and be a bit faster / more robust.

• Added target edge length QEM and cluster-based simplification methods in geometry script.

• We now more consistently use the term "Connected Islands" instead of "Components" when referring to connected pieces of a mesh in Geometry Script nodes.

• Filled out geometry script list conversion extract/set methods for the various list types: Scalar, UV, Vector and Color.

• FOrientedBox is now exposed to Blueprint.

• The 'debug' pins in geometry script are now hidden in the Blueprint graph

• Geometry script now supports standard MikkT tangents in the Compute Tangents node, on platforms where the MikkT library has been compiled (i.e., win/mac/linux).

Bug Fix:

• Added Vertex and Triangle ID validation to geometry script Mesh Query methods so users do not crash on querying an invalid element ID.

• Made dynamic mesh pools safer to use from a non-game thread.

• Fixed the output param display name for GetMaxMaterialID.

• In geometry script asset creation methods, we now test that the paths for new assets are valid before attempting to use them.

• Fixed a bug with "AppendXWithSimpleCollision" geometry script methods where repeated calls of a script could accumulate extra copies of the collision shape, because blueprint re-uses output reference objects across script invocations.

• Removed requirement that patch unwrap mesh be non-compact.

• Fixed issue where Geometry Script would maximally simplify a mesh if "Simplify to Tolerance" was run with a tolerance of 0.

• Deprecated incorrect geometry script perlin noise node, and added a corrected v2.

Landscape

New:

• No longer visualizes disabled landscape patches.

• Now sorts landscapes alphabetically when multiple landscape actors are editable in landscape mode.

• Changed the landscape Collapse Layer tool to use selective render weightmaps code instead of intermediate render code.

  • Added weightmap support for edit layer selective renders.

• Added a GrassMap RenderEveryFrame command, to debug grass map runtime generation.

• Changed landscape tools with the "Combined Layers Operation" feature to use new selective layer render code.

  • Stops using old "intermediate render" code and avoids polluting the persistent texture data with intermediate results. The new version is faster and safer.

• Moved the Landscape feature level warning (for shader modes < SM5) from a blocking notification to a simple console log.

• Landscape optimization for the editor:

  • No longer inspects materials for finding mobile layer names when generating mobile weightmap allocations while there's no weightmap allocations in a given landscape component in the first place.

• Performance optimization when undoing landscape edits.

• Added a transient landscape property to track the last selected edit layer index. Edit layer selection state is persistent when toggling between editor modes.

• Removed the ability to place Landscape Blueprint brushes from the Place Actors panel.

• Added all landscape brushes from the Landscape Manage - Blueprint Brush tool.

• Enabled dynamic Landscape Spline control point billboard size and offset in editor.

  • To change the offset and size, configure Spline Icon World ZOffset and Spline Icon Scale under the Landscape Project settings.

  • To maintain legacy spline behavior, set CVarLandscapeSplineEnableFixedSpriteIcons=True.

• Removed the Landscape Spline Deform to Landscape buttons used to update spline data for non-edit layer landscapes. With edit layer landscapes, Landscape splines automatically affect the data when a Spline Edit Layer is added.

• Added API exposure for all public BlueprintCallable Landscape Patch functions.

• Exposed landscape component's GetGrassTypes to Blueprint.

• Added generic World Partition Landscape Builder Commandlet. Builds all landscape grass maps, physical materials, and nanite components.

• Improved landscape.DumpLODs command:

  • Now it only displays the landscape LOD information by default and -detailed needs to be used to get the verbose mip-to-mip delta information.

• Added an option to align landscape grass instances with the precise triangle normal when using jittered grid mode.

  • Also fixed an issue with the triangle normal calculation.

• Added API exposure to virtual functions on landscape patch plugin UCLASSes so that they can be inherited from in other modules.

• Remove redundant and unsafe non-blocking landscape nanite build from PreSave. No longer builds Nanite at all on auto-saves.

• Added an option to Add Unassigned Blueprint Brushes in the Landscape Edit layer context menu. If a Blueprint brush does not have an assigned edit layer, the right-click context menu will include an option for re-assignment

• Added a DeleteActors helper in order to let the editor's delete actors dialog run when possible but also to let actors be safely deleted without using the UI in other cases.

• Added Landscape Edit Layer Context Menu customization system.

  • Added the ability to easily extend right-click context menu actions for custom edit layer classes.

• Moved LandscapePatch plugin out of Experimental.

• UX improvements:

  • Updated icons to landscape target layers display order methods.

  • Added sort type (ascending/descending) for this.

  • The sort/filter options have moved next to filter box within the Layers property (since they affect only the layers that are visible, these buttons should not be present when the property is collapsed).

  • Added a number of target layers in the Layers property header, in order to be similar to standard arrays and also the edit layers property above.

• Added Collapse All Edit Layers action to the Edit Layer context menu.

  • Removes all edit layers and flattens the current data into the default edit layer.

• Updated default spline edit layer selection behavior:

  • Selecting the Splines Edit Layer no longer auto-activates the Splines tool.

  • Double-Click on the Splines layer, or use the right-click context menu option, to toggle between the Splines Tool and last active tool.

Bug Fix:

• Fixed mobile landscape weightmaps not being taken into account by streaming.

• Fixed a crash when auto-filling target layers from material.

• Fixed height/weight alpha precision loss when merging landscape.

• Fixed grid-alignment warnings when creating a landscape with more than one region worth of components.

• Added refined Water Body underwater detection to avoid applying post-processing when the camera is underneath or outside the bounds of the collision volume

• No longer calls UpdateResource when changing texture LOD settings for render targets. This fixes the water brush breaking landscape after switching between desktop mobile preview mode and desktop renderer.

• Fixed landscape legacy weight blending potentially leaving ghost weightmaps on large landscapes.

• Turned assert about landscape physical material tasks failing to complete on save into an error, since that is something that can happen if the material fails to compile.

• Fixed a crash that happened when trying to clear a Landscape Paint Target Layer that was already empty.

• Fixed a crash when a Landscape Blueprint brush was deleted and then restored via Undo.

• Removed spurious assert when the landscape material references a texture named "Heightmap" (implicit name for heightmaps in landscape).

• Fixed determinism issue when updating landscapes with conflicts on the border of landscape components that would lead to landscape proxies getting dirty in an inconsistent way.

• Fixed an issue with World-Partition Landscape Proxy Nanite Materials not updating after using Undo/Redo with the Landscape Paint Tool.

• Fixed invalidations of landscape physical material during painting.

  • The last few frames of a paint stroke could be lost because the invalidations were ignored while a physical material task was still pending.

• Fixed several issues with ReinitializeHeight/Weights in landscape patches.

• Fixed crash with multiple patches. The render command recorder was not stopped at the right moment: both Render and Blend operations must respect the render mode (Immediate or Recorded), which could be broken in case the renderer was grouped with another one earlier.

• Fixed landscape that was not updated after having reinitialization had been executed.

• Fixed a crash when the same patch is rendered in several batches. The boolean bReinitializeHeightOnNextRender does not support this and that supposes that during reinitialization, the patch is rendered in a single batch. The fix artificially increases the batch size to the entire landscape, which is wasteful, but the best we can do until the reinitialization is replaced by a proper landscape edit layer partial merge.

• Fixed landscape batched merge not handling multiple weight patches (i.e. multiple target layers) being rendered on the same patch component (the render targets would cycle in between each, leading to invalid blending).

• Fixed landscape patches' input area (which was the size of the patch), that would lead to needlessly large batches.

• Fixed potential determinism issue with landscape patches that could theoretically render before their referenced textures are fully streamed in.

• Handle null landscape patch weight entries in the couple of places where it was not.

• Fixed invalid checks in landscape batched merge.

• Stop over-invalidating on empty landscape components. Change to invalidating only components that added or removed weightmap allocations.

• Fixed PCG refresh on undo/redo landscape painting.

• Moved creation of landscape nanite's UStaticMesh out to the game thread to remove danger of threading issues.

• Fixed improper blend of landscape edit layers with custom height/weight flags.

• Avoided a crash if saving when FLandscapeTextureStreamingManager is not available.

• Fixed a bad ensure condition when trying to cache data from an empty area in the landscape smooth/flatten/erosion tools.

• Fixed a crash with the Landscape Copy Tool when attempting to copy data from an invalid or deleted landscape.

• Fix deleted landscape spline points/segments coming back after duplicating the spline.

• Fixed a crash occurring when saving level instances that include World-Partition Landscapes.

• Fixed ctrl+alt+right click drag increasing/decreasing the landscape brush continuously even when the mouse was still.

• Fixed mobile landscape data hash being zeroed when entering PIE. That was leading to all landscape mobile data being rebuilt when entering PIE while in mobile preview mode.

• Fixed a landscape flatten tool conflict with undo.

• Fixed landscape flatten tool behavior at the edges of geometry.

• Fixed landscape painting errors when toggling "invert" during a brush stroke.

• Fixed an issue with the Landscape Resize tool clearing all heightmap/weightmap data for edit-layer based landscapes.

• Fixed an issue with Water Bodies automatically generating invalid collision boxes in the Blueprint editor when changing the Wave Source property.

• Prevented a crash when redoing an undo of a Water Zone actor deletion.

• Fixed an issue with the Landscape Resize tool using the wrong Y position offset while expanding the landscape.

• Fixed the handling of changing transforms when building landscape groups.

• Fixed additive blend mode for landscape texture patches.

• Fixed various landscape+water new cases where it was assumed that GetWorld() returns a valid world while it's not the case when a world is deleted from the content browser.

• Improved the Landscape Import/Export Exposed user experience by exposing the Landscape Gizmo location property to the Landscape details panel.

• Fixed a crash updating landscape edge snapshots when heightmaps are not readable.

• Fix landscape edit layers merge on Vulkan SM6.

• Fixed a crash when renaming a Landscape Paint Target Layer to an invalid name. Target Layer names must be unique non-empty names.

• Keep landscape patches in sync with their host landscape by upgrading them from the soft-dirty package list to regular dirty status when the landscape makes that same change.

• Enabled landscape grass culling when running MRQ.

  • Previously we would pass an array of no camera to RegenerateGrass, which prevents all landscape grass from being distance-culled.

  • Instead, we now pass nothing, which leads landscape to use the streaming manager to get the current "views", one of which is the captured camera (the other, the editor).

  • This is better handled in the new movie render graph but at least this solves a performance issue in grass-heavy scenes. The user can now override the grass cull distance (as well as grass density) via Game Overrides settings.

  • Default = override + cull distance multiplier of 50, to have (mostly) backwards compatibility with the previous MRQ captures (which prevented all grass culling) The default for grass density override is false, though, also for backwards compatibility reasons.

  • Note that the new movie render graph doesn't have these settings since it doesn't have them for ViewDistanceScale, ShadowDistanceScale, etc. so we figured it didn't need those grass settings either.

  • Also added a CVar (grass.VisualLog.ShowCameraLocation) to show the camera locations used by landscape grass in the visual logger.

• Now displays an error message instead of crashing when failing to import an image file to a landscape layer.

• Avoided a crash on opening a scene containing the legacy LandscapePatchManager when the scene was already at the max number of edit layers. Ignore the soft limit when creating the new dedicated patch layer.

• Fixed OOBB->AABB computation in landscape batched merge, which was leading to bad blend groups for landscape patches.

• Fixed an issue with landscape brushes that would sometimes modify height/weight data on the border with unloaded tiles.

• Avoided a crash when opening a map with a disconnected landscape patch manager, when the editor isn't ready to provide the current selection set.

• Fix for Nanite landscape possibly generating invalid Nanite mesh streaming data on cook.

• Added an option for landscape Blueprint brushes to tell if they require power-of-2 render targets to operate. For backwards compatibility reasons, it's set to true by default, although it's not the best option. This ensures that the water brush behaves precisely how it used to before UE 5.6

• Fixed the water brush on Vulkan SM5.

• Fixed an issue where Landscapes only generate Nanite for the first 64 components of any given landscape proxy.

• Fix missing landscape spline meshes after undo of merger of two splines.

• Now hides the landscape selector when the New tool in the Manage panel is active.

• Fixed a rare crash in the landscape texture streaming manager when landscape textures are GCed while the landscape is still active.

• Fixed missing updates to landscape physical material when using a material instance.

• Fixed a crash using Undo operation with a Landscape Patch and Patch Edit Layer.

• Landscape add component tool fixes:

  • Now properly generates extrapolated height data on each persistent edit layer, so that there's continuity on the corners on each of them.

  • No longer generates collisions on component creation because at this point, the height data is set to all zeroes (i.e. the minimum height, not the median, default height value) and doesn't correspond to what comes out of the the subsequent edit layers merge, whose readback would generate an identical heightmap hash, and would therefore not re-generate collisions. Delaying collision generation until the merge fixes this, since that's the first time the collision values would be valid anyway.

  • Now prevents existing neighboring components from being dirtied when adding a new component (previously they would get dirty by the simple act of caching/interpolating their height data).

  • Automatically apply splines after component creation, so that new components are immediately affected by the splines that overlap with them.

  • Improved visualizer for the component about to be added.

• Prevent landscape edge fixup from running on world composition maps, where heightmap sharing is still possible.

• Fixed all logs involving landscape LandcapeGroupKey and LODGroupKey.

• Fixed ensure loading old landscape data with landscape.StripLayerMipsOnLoad = false.

• Fixed a crash occurring after exiting a level instance with the Landscape Editor - Landscape Copy tool active.

Deprecated:

• Deprecated legacy non-edit layer landscapes:

  • Removed all editor tooling related to non-edit layer landscapes (e.g. Landscape Retopologize Tool/XY Offset data).

  • Disabled the creation of non-edit layer landscapes and the ability to toggle between edit layers and non-edit layer landscapes.

  • When non-edit layer landscapes are loaded, an automatic conversion to an edit layer based landscape occurs. During this process, all proxies copy the existing non-edit layer data to a new default edit layer. Any existing Retopologize data is removed and the proxy is flagged as "soft dirty" with an editor viewport warning.

• Removed global and local merge code and deprecated anything that was only available for this.

  • Since the console variable "landscape.EditLayersLocalMerge.Enable" is deprecated now, a new console command was added, to trigger a landscape layer full update (landscape.ForceLayersFullUpdate) :

    • With no argument: Updates all landscapes.

    • With arguments: Updates all landscapes whose display name (partially) matches the argument (e.g. with 3 landscapes named Landscape_0 Landscape_1 and Landscape_2, "landscape.ForceLayersFullUpdate _0 _1" will trigger an update on the first 2 only)

• Changed landscape edit layers merge API from experimental to official.

• Removed landscape's "intermediate render" code path.

Modeling Tools

New:

• Added support for the tangents tool to choose the reference UV layer to use when computing tangents.

• Added BrushValue property to the AttributePaintTool to allow users to specify the target value that is painted down rather than always accumulating to 1.0f.

• Added symmetry support to the Paint Vertex tool.

• The target requirements for the Inspect tool have been relaxed to support DynamicMeshProviders rather than MeshDescriptionProviders.

• Modify UBoundarySelectionMechanic to be able to operate on either closed loops (current behavior) or open spans (new optional behavior).

• Lattice Deformer Tool:

  • Modified the FFDLattice to optionally accept an oriented bounding box rather than computing one from the input mesh. This means the lattice can operate on just a portion of the mesh. Lattice computations are now all done in local space.

  • Added an ILatticeStateStorage interface, which enables the interactive LatticeDeformerTool to store its state in when the tool ends.

• Added support for a HitBackfaces option to the MeshAttributePaintTool.

• The attribute paint tool now has the option to use a more-shaded material.

• Added an option to the Mirror tool to averaging normals along the weld.

Bug Fix:

• Fixed a crash on attempting to split meshes w/ invalid material IDs.

• Fixed an issue where the AttributePaintTool's stamps would be skewed for meshes with non-uniform scale.

• Fixed where modeling tools could incorrectly change material ID assignments due to the static mesh tool target 'IMeshDescriptionCommitter' interface not finding the right material ID mapping method.

  • The same function is also on the Provider, so needed to be pulled to the top level for both interfaces to find the method.

• Made vertex sculpt tool skip render decomp step if the sculpt mesh has no triangles (fixing ensure when tool is run on an empty mesh).

• Fixed a crash in the subdivide tool. We were passing in the wrong vertex count to OpenSubdiv.

• Fixed a potential crash when enabling UVLayoutPreview.

• Fixed a warning about realtime mode erroneously appearing in modeling and scriptable tools modes when the editor doesn't have focus.

• Fixed a potential crash in DisplaceMeshTool for meshes with invalid topology.

• Fixed a GC crash with mesh element selection's usage of PreviewGeometry.

• Fixed support of the 'join method' for closed curves in the Mesh Splines tool (previously always used 'square' joins).

• Fixed a crash on starting modeling mode w/ an actor selected that has null components attached.

• Fixed a crash when swapping from Modeling Mode to Animation Mode with Motion Trails active.

• Fixed a potential crash in the ISM Editor tool.

• Fixed a potential nullptr dereference crash in OnActiveViewportChanged for StylusHandling.

• Fixed the OutputType properties' display name and tooltip to SourceType in the BakeVertex tool to better reflect the function of those properties.

• Fixed an issue where tools in Modeling Mode and Scriptable Tools Mode would not tick if the viewport did not receive focus yet during the editor session.

• Fix for crash in Extrude Path tool when creating a totally straight polyline.

• Fixed a rare crash when hovering over Mesh Element Selection before viewport is focused.

• Fixed Mesh Splines tool handling of duplicate start/end points generated on looping splines, which could previously cause incorrect triangulations.

• Lattice Deformer Op: Fixed a check that fires when operating on non-compact meshes.

• Fixed an issue where the Union tool only transferred UV Channel 0 in the result mesh.

• Fixed a potential crash in TDynamicVector::TruncateBlocks for an empty vector.

• Added a workaround to prevent a crash in UVAtlas.

• Normal seams on dynamic meshes are now automatically hard edges when converted to mesh description, which can better preserve sharp features when the dynamic mesh is used for editing a static mesh or skeletal mesh asset.

• Reduced confusion during displace tool computations by adding a slight delay to the appearance of the 'in progress' material.

• Addressed a bug which displayed random gizmo orientation in local space in the PolyEdit tool.

• Fixed an error in AddSingleClickBehavior and AddDoubleClickBehavior function tooltip.

• Fixed the StaticMeshSelector only working on exactly StaticMeshComponents.

Procedural

New:

• Added "SetWorldObject" on the PCG Data Exporter for Blueprints.

  • Objects can't be cast to World in Blueprints, and when doing an utility widget, Get Selected Assets returns an array of objects.

  • Does the cast internally, returns false if the cast fails.

• Added support for skeletal meshes in BoundsFromMesh and PointFromMesh.

  • Deprecate StaticMesh property to Mesh property in PointFromMesh, with override alias

• Added a new "Extract Attribute" node to extract any attribute from any data and domain.

  • Factorized code for Get Attribute From Point Index.

  • Get Attribute From Point Index now works with data domains too.

• Added the Polygon2D data type, that represents a 2d polygon (e.g. on a plane), with an additional transform. Has some polygon specific metadata properties on both the data domain and the vertex domains.

• Added Python Interop Plugin and Execute Python Script Node.

• Stand up the Break Debugger debug feature for GPU nodes, and make the breakpoint conditional on inspection so that it is usable in partitioned/higen use cases.

• Fixed multiple performance bugs where GPU-resident data is unnecessarily read back when passing through Change Grid Size nodes.

• Added toggle to GPU nodes to trigger render captures for debugging (editor only).

• Added GPU processor node for Attribute Sets.

• Fixed runtime generation bug where changing Partition Grid Size setting on PCGWorldActor resulted in generated actors being leaked into the level.

• Added re-nameable categories for organization in Graph Parameters + Includes Drag and Drop.

• Improved priority calculation in distance and direction runtime generation policy to behave more uniformly across grid sizes and to be easier to tweak.

  • Note: May require re-tweaking if non-default weights were in use.

• Added Generate Landscape Textures node that can generate a height map as well as grass maps from the landscape. This path does not rely on virtual textures, and is significantly more efficient than the CPU path.

• Added LLM tags for tracking memory allocations.

• Added a get segment node that allows the user to retrieve a segment from a polygon 2d, spline or point data, in the form of two points or a spline containing a single segment. Support negative indices (-1 being the last segment) in all cases and hole support for polygons.

• Added 'Clip Paths' node to cut paths (points or splines) with clipping polygons. Supports either difference or intersection.

• Add new property for data that supports elements: @Data.$NumElements.

  • Useful to combine with Filter Data by Attribute.

  • Added the concept of read-only for properties in the Selector menu to not show for output.

  • Applied this concept to Polygon2D properties.

• Added support for property remap when converting back and forth between Attribute Set and Points

  • Saves adding "Copy Attribute" nodes to do the conversions.

• Added option to disable default input creation for top-level graphs. Will become default eventually.

• Improvements on Boolean and Bitwise op.

  • Boolean op now supports arithmetic types as input, still produces a bool as output.

  • Added operators NAND, NOR, XNOR, IMPLY, NIMPLY.

  • Added ShiftLeft/Right for Bitwise.

• Added "AddModulo" operation in maths node.

  • Do operation (A + B) % C .

  • Useful to get the ($Index + 1) % NumPoints.

• Added comma-separated tag list (override) to create target actor node.

• Added polygon offset functionality (offset positive or negative, open and close holes).

• Added polygon operations (intersection, difference, union, inner intersection, exclusive or, cut polygon with paths).

• Added GPU implementation of Transform Points.

• Added change detection to runtime generation state to throttle scans over grid cells, saving per-frame Game Thread cost.

• Added 'Split Spline' node to split splines based on a few criteria (key, distance, alpha) or on a predicate on control points.

• Add `IsBuilder` to Get Execution Context node.

  • Needed to know which component the builder was scheduling.

  • Added that information to the PCG Editor Module, which can be queried through IPCGEditorModule.

  • Add helper function to get the result from the IPCGEditorModule.

• Added support for attribute curve remap.

  • Added a new mode in the existing attribute remap node.

  • Added an alias for curve remap.

  • Also exposed ExternalCurve for the spline sampler (with the new PCG_OverridableChildProperties).

• Added a 'Spline Intersection' node that computes intersections between splines (in 3d).

• Added a debug feature that repeatedly dispatches the compute graph to enable profiling, compiled out by default (PCG_GPU_KERNEL_PROFILING).

• Added String Contains and Matches nodes and .Length extractor + Extractor:

  • .Length - Length of the string

  • Contains - Whether string A contains substring B

  • Matches - Whether string A matches string B exactly

• Added Cvar pcg.GPU.FuzzMemory which initializes GPU buffers to random values during execution to help catch uninitialized data bugs and other undefined or unreliable behaviour.

• Added the ability to retrieve the ray hit material with GetMaterialFromCollisionFaceIndex, instead of needing to specify a material index.

• StructUtils: Added new features to the Property Bag Details View Child Row Widget:

  • Customizable via the EPropertyBagChildRowFeatures enum (set via metadata specifier).

  • New STypeSelector widget (wrapper around SPinTypeSelector) for type selection.

  • New Access Specifier button.

  • New drop down menu.

• Added 'Get Asset List' node to get assets from a folder or from a collection. Can extract asset classes and generated classes when these are blueprints too.

• Anim - SkinnedMesh: Exposed SkinnedAsset and TransformProvider on FSoftSkinnedMeshComponentDescriptor.

  • To have parity with the non-soft version.

  • To be used for the Instanced Skinned Mesh Spawner in PCG.

• Nanite Assemblies: Initial prototype of Nanite Assemblies builder to support creating Static Meshes.

  • Interop plugin, as this is still very experimental.

• Added specific graph cache enabled and budget CVars for editor worlds vs game worlds.

• Can now override nested properties in the Static/Skinned Mesh Spawner.

Bug Fix:

• Fixed multiple cook warnings arising from GPU node kernels.

• Fixed bugs with CreateGrid2D and CreateGrid3D Custom HLSL helper functions where the NumRows/NumCols arguments were not used correctly.

• Fixed Filter Elements by Index node's indexing issue.

• Now supports Attribute Rename for Selectors and Data domain.

• Improvements to Spline Mesh spawning.

  • Component class is now respected when spawning the spline mesh.

  • Added override on the component itself, if users have special fields they want to fill.

• Fixed an outstanding issue in package build where the Switch and MultiSelect nodes can fail if the DisplayName is different from the real name for an EnumValue.

  • GetDisplayName won't return the display name in package build but the real name.

  • Since we use the Display name for naming the pins, we need to keep a mapping.

• Fixed Create Points Sphere crash from divide-by-zero when graph params are used to set degrees to 0.

• Fix bool attribute in Write to Niagara Data Channel.

  • Writing bool values was crashing.

• Fixed bug causing Inline Constant not to respect required pin.

• Fixed Per data CRC caching issue when there are N:N mappings, which was the case in some configurations of the Match & Set node and the Distance node.

• Added support to call Pre/PostEditChange on objects on ApplyOnObjects.

  • When overriding objects with ApplyOnObject node, we call Pre/Post Edit change to have any pre/post processing to do after a change.

• Fixed an outstanding bug in match and set attributes for attribute sets in keep unmatched mode.

  • SetAttributes metadata entry keys arguments were in the wrong order.

• Can now drag and drop in the graph any asset that is a subclass to UPCGBlueprintElement.

• Fixed the RemapMaterial not working if the target dynamic mesh didn't have any material.

  • This was breaking appending a mesh with materials to an empty dynamic mesh, for example.

• Fixed erroneous readbacks and re-uploads of arrays of GPU data items that are not placed first in the compute graph's input data collection.

Texturing Tools

New:

• Improvements to UCurveLinearColorAtlas.

  • A bug was fixed which caused nearly black negative values to become white.

  • TextureHeight of Atlas is now automatically set to the number of curves.

  • The default width of new atlases is now 64 instead of 256.

  • Interactive updates are now much faster.

  • The UV scale for sampling atlases is now fixed so that the U range of [0,1] goes from the first to last pixel center. Old atlases will automatically be updated for these changes.

• Added Virtual Texture feedback and warmup support to TextureGraph material rendering nodes.

  • Virtual texture samples will now stream to the correct mip level before the final render.

  • Added a new console variable to control the warmup length: "TG.VirtualTexture.WarmupFrames".

UV Editor

Bug Fix:

• Fixed localization issue for the "Advanced Transform" category label.

• Fixed UVEditor launch conditions to support BP actors with mesh components.Fixed an issue where the RMB context menu would not display the UV Editor option for actors with any invalid components.

World Building

New:

• Added a Save Texture to Asset node (editor only).

• Added a world partition function to insert a new runtime cell transformer.

• HLOD:

  • Support Spline Mesh Components in Approximate Mesh HLOD.

  • Added world partition validation to detect actors having a HLOD Layer which doesn't support that actor class. Rules can be specified using a config file and violations trigger a warning.

• Standalone HLOD: Added AWorldPartitionHLODOnlyLevelInstance Actor to allow users to place Standalone HLODs in the world without having to add actual Level Instance to the world

  • After adding the actor to the world users can select the level for which Standalone HLODs should be loaded.

  • The actual level is neither loaded nor cooked. It's only used by the Standalone HLOD Subsystem to pull in the corresponding Standalone HLOD levels.

• Add overridable attribute support to CustomHLSL node

• Custom HLOD support:

  • Added WorldPartitionCustomHLODActor, an actor you can place in the world to provide a custom HLOD representation (using static mesh component).

  • Added a new HLOD Layer type: "Custom HLOD Actor".

  • Custom HLOD actors assigned to "Custom HLOD Actor" layer are injected as-is into the HLOD runtime partition.

  • The "Custom HLOD Actor" layer can specify a parent layer. In that case custom HLOD actors are also used to generate parent layer's HLOD representation.

  • Custom HLOD actors can also be assigned to other (non-Custom) HLOD Layers. In that case they are used only during HLOD generation and are not pulled into the HLOD partition themselves.

  • Adds a new LinkedLayer property to UHLODLayer, visible only when LayerType is set to Custom HLOD Actor

  • LinkedLayer is used to control the visibility of Custom HLOD Actors. They become visible when actors from the LinkedLayer are unloaded.

  • If LinkedLayer is not specified, Main Partition is used to control the visibility.

• Added a SceneCapture node.

• Added GPU implementation for CullPointsOutsideActorBounds.

• Now supports overridable attributes on GPU nodes.

• Added a world partition function to check if runtime cell transformers are installed.

• Cell Transformer: Improved handling of components that can be ignored.

• FastGeo: Moved FastGeoContainer PSO Precaching from PostLoad (GameThread) to be asynchronous.

• Added grid streaming dependency mode to scheduling policy

• Move PCG GPU from Experimental to Beta.

Bug Fix:

• Standalone HLOD:

  • Fixed a crash when adding a standalone LI with standalone HLOD to a non-WP world.

  • Made sure that Standalone HLOD Actors are injected into appropriate containers during streaming generation.

• Fixed attached spatially loaded actors not being GCed when AttachParent exists.

• EDL: Fixed handling of EDL injection of client-only cells in cases when it happens after BeginPlay Removes irrelevant cells from cells lists during the injection.

• Foliage Editor Subsystem: OnActorMoved optimization to avoid expensive TActorIterator operations when no work is done inside the TActorIterator loop.

• HLOD: Fixed distributed HLOD builds running on non-WP worlds not doing any work.

• WPBuilderCommandlet: Fixed logging when processing additional maps.

• Standalone HLOD: Fixed logic that generates the list of Standalone HLOD levels returned by ShouldProcessAdditionalWorlds, to correctly handle cases where the number of HLOD Setups differs from the maximum HLOD hierarchy depth.

• FastGeo: Fixed a crash on mac caused by TArray relocation of FFastGeoPrimitiveComponent which contains a FRWLock.

• [Cell Transformer] Replaced references to objects that could be recreated during RerunConstructionScripts triggered from ApplyRuntimeCellsTransformerStack in Standalone Editor.

• Fixed a crash while level editing. Deleting an actor inside a level instance then pressing save in the bottom of the level viewport would crash in some situations.

Media

Media Viewer (Beta)

New:

• Extra keybinds for videos:

  • Fixed spam of updates when offset / scale was not changing.

  • Exposed delegates to the public API so it can be used in the image viewer overlay.

• Transform lock now also duplicates media playback controls between players.

• New dragging options:

  • Revamped dragging system a little to support more zoom types.

  • Added alt+rmb to zoom (in addition to scroll wheel).

  • Added alt+mmb for panning (in addition to left click).

• Improved level editor viewport robustness:

  • Made sure all settings have default values.

  • Moved level viewport render to end of RT thread event.

  • Added cross-thread robustness to the pixel color system.

• Media track section:

  • Added a media track section that lists tracks in sequencer that have a media texture.

  • Added the refresh dynamic group button.

• Images now support yaw rotation.

• Added a clear history button.

• Added Snapshot category.

Bug Fix:

• Fixed controls to properly display when playing in reverse.

  • Also added keybind info to tooltip buttons.

• Media Viewer / Media Player Editor:

  • Added scrub event to IMediaPlayerSlider.

  • Integrated scrub event to allow dual scrubbing.

  • Fixed bug in file drag/drop for media viewer not allowing comparisons to current image.

• Media Stream: Fixed for packaged games.

• Fixed crash relating to viewport.

• Added texture size constraints to render calls.

• Fixed struct initial values.

• Fixed a crash with invalid library thumbnail.

• Fixed changing splitter location in single image mode.

• Media Stream:

  • Corrected the "Add Track" button for Media Sources.

    • Will now always display the button, but disable it, rather than hide it, when it is not available.

    • Added tooltip to the button explaining what it does and when it is usable.

    • It is now disabled if the Media Stream's world is not the level level sequence's world.

  • Fixed relevancy issue for Sequencer.

  • Fixed Sequencer binding issues.

• When locked scrubbing, the videos not being directly scrubbed is paused.

• Invalid assets are removed from history when the tab is opened.

• When in dual view and without an A image, the slider position now works correctly.

• Fixed pixel sampling for compressed images - All pixel samples now work via a render target.

• Fixed an issue with A-image not being displayed behind B-image when the slider was set to 0%.

• Right click asset fix: There's now a maximum parent check for material instances

• Fixed crash when 2 viewport tabs are open.

• Added cross-thread hardening for pixel sampling.

• Added more texture encoding types to the no-read-with-rhi list.

• You now must supply a unique name when saving snapshots.

• Toggling the overlay while in comparison mode no longer blocks the custom image ui (i.e. video control overlay).

Mobile Rendering

Mobile Lighting

New:

• Translucent objects now receive CSM shadow when surface lighting.

Mobile Postprocessing

New:

• Added EUpscaleMethod::Area and swapped in for PrimaryUpscale using the mobile renderer to reduce blurriness at low screen percentages.

Online

Crash Reporter

New:

• Apple:

  • Unified crash dump format on iOS & Mac to crashlog

  • Added commandline/ini override to enable crash dump on iOS.

• Upgrade PLCrashReporter to 1.12.0 and apply our existing modifications by diffing 1.8.1 vanilla & our modified 1.8.1

HTTP

New:

• Added an option to enable different http versions per IHttpRequest via SetOption(HttpRequestOptions::HttpVersion).

• Limit the number of concurrent HTTP requests by default. This helps avoid connection timeouts when queuing up very large numbers of HTTP requests.

Bug Fix:

• Fixed Blueprint compilation crash due to mismatching pin names.

• Fixed a low rate crash in HTTP requests.

Online Subsystem

New:

• OSS for GDK: Propagate the checkout failure error codes from GDK APIs into PurchaseFailure and PurchaseFailureStart errors.

• OnlineServicesCommon: Added TOnlineAsyncOp::GetWrappedHandle to transform the result of an operation to simplify cases where one operation is implemented in terms of another.

• Added OSSv2 PSN Connectivity interface.

Bug Fix:

• Fixed OnlineServicesNull handling FPartialUpdatePresenceFix FPartialUpdatePresence not merging RichPresenceString.

• "ENABLE_PGO_PROFILE 1" Shipping configuration can now disable online subsystems from the commandline.

• Fixed Push Event related issues

  • Fixed FNpPushEventWrapper::Initialize not correctly handling callbacks disposing.

  • Fixed OSSv1/2 FNpPushEventPushContextWrapper not handling TOptional value safely

• Fixed crash in FUserManagerEOS::ReadFriendsList callback when user failed to authorize.

• OnlineSubsystemIOS: Fixed a race condition that caused a purchase to fail when purchasing an offer immediately after finalizing a successful purchase of the same offer.

Deprecated:

• Removed deprecated GoogleSignIn support from OSSGoogle for Android.

Platform

Linux

New:

• Upgraded toolchain to LLVM 20.1.8

• Added preliminary support for BuildCMakeLib from Linux.

• Add -NoStripSymbols to UBT to support build systems where stripping needs to happen later in the process.

Bug Fix:

• Re-enabled PreLoadScreens.

• Now skips chmod +x dotnet if file is already executable. This addresses permission errors if UE is run on a read-only file system on Linux.

• Fixed an issue where BuildCMakeLib can produce .so files that depend on system shared libraries.

• Fixed loss of precision when FLinearColor is requested in VulkanDynamicRHI::RHIReadSurfaceData.

• Updated FLinuxPlatformProcess::BaseDir to support -basedir=.

Mac

New:

• Inline Ray Tracing is now available for Mac platforms running with the SM6 renderer.

• Parallel translation of encoders is now enabled by default on Mac (and can be used on iOS). This gives a significant reduction in overall RHI thread time.

• Compute shaders are now executed with concurrent dispatch on iOS and Mac platforms. This provides a significant performance boost when using Nanite.

• Adding Metal-strip to lib processing to reduce metallib sizes (around 10% reduction).

• Delete iAD framework (deprecated) from Core.Build.cs.

• Mac: Included Mac MainThread in CrashContext.runtime-xml for CrashReporter.

• Added support for Aliased formats to be explicitly declared enabling optimisation on Metal platforms.

Bug Fix:

• Fixed tweakobjectptr debug on Mac OS.

• Fixed process reaping to be non-blocking and not leaking.

• Fixed an issue where on Mac/iOS SM5 uniform buffers were bound to indices that were unnecessarily high, which caused validation errors in the RHI.

• Stopped the submission thread getting stuck when encountering a NotPermitted GPU error.

• Fixed bug where Metal runs out of counter sample buffers.

  • Metal now longer breaks encoders by default when profiling, this can still be enabled with GMetalSampleComputeEncoderTimings and GMetalSampleBlitEncoderTimings.

• Mac:

  • Fixed Cursor offset from visual because of an outdated ScreensArray when processing OnWindowDidMove, resulting from a DPI change.

  • Fixed MainThreadChecker issue in FMacApplication::OnWindowDidMove. Move bDisplayReconfiguring from FCocoaWindow to FMacApplication since it's not dependent on FCocoaWindow

• HairStrands: Disable HairStrands rendering on Mac SM5.

• ApplePlatformFile: Refactored to use the common implementation FFileHandleRegistry to support more than the limit of read-only opened files.

• Changed Fatal log to a Warning when posix_spawn fails in CreateProcInternal, for consistency with Windows, and to prevent unnecessary crashing.

• Fixed DPI scaling bug which could cause Mac's to render at 2x res when using PIE.

• Fixed performance issue on editor start up with mdfind taking multiple minutes due to matching incorrect types.

• Fixed potential bug where bindless handle could be null when retrieving viewport texture.

Online

New:

• Updated GooglePlay Billing library to 7.1.1 in OSSGooglePlay

Bug Fix:

• Pixel Streaming:

  • Fixed a crash when streaming with Pixel Streaming and a user attempts to enter text through the stream text modal on a multiline text element.

  • Fixed a crash in the editor when setting the streamID on the command line and streaming with Pixel Streaming.

• AVCodecs: Encoding frames with VP9 can now have odd pixel width or height.

Windows

New:

• Moved Win32 calls for mouse cursors off of the game thread and onto the task graph to reduce stalls on the game thread from internal lock contention that occasionally occurs.

• Moved processing of mouse inputs to a dedicated thread to reduce overhead on the game thread for Windows. This is useful for mice with high polling rates, e.g. 8000 Hz.

• Made Clang 20 the preferred version of Clang on Windows.

• Changed thread priorities for Game, Render, and RHI threads from Normal to AboveNormal on Windows.

• Increased MinimumWindowsX64TargetVersion from 0x601 (Windows 7) to 0xA00 (Windows 10) to make more functionality available directly from Windows headers.

Bug Fix:

• Ensured that shared resources are created as committed resources for improved compatibility.

• Changed our heap VA computation for transient resource allocations on Windows to fix D3D12 call failures on some GPUs.

• Fixed FWindowsPlatformMisc::SetEnvironmentVar to unset the variable if it is null or "", just like on Mac and Linux, and .NET 8.

XR

New:

• Added native support for the OpenXR XR_EXT_frame_synthesis extension, including Application SpaceWarp (AppSW) on Meta Quest:

  • To enable, set:

    • r.Velocity.DirectlyRenderOpenXRMotionVectors=1 (read-only)

    • xr.OpenXRFrameSynthesis=1 (toggleable at runtime).

  • Currently only supported on the Vulkan mobile forward renderer, and cannot be used alongside features which require standard velocity rendering (such as TAA/TSR).

• Added Android Runtime category tag for immersive mode selection.

  • See https://registry.khronos.org/OpenXR/specs/1.1/html/xrspec.html#appendix-android-runtime-category

• AddedIOpenXRExtensionPlugin hook OnCreateHandTracker().

• OpenXR XR_EXT_user_presence is now supported:

  • Added support for the user presence extension, which tells us whether the hmd is being worn if the platform supplies that information.

  • Removed the previous implementation which attempted to drive the worn state from other openxr state transitions. This had inconsistent and sometimes broken behavior across platforms.

• Replace xr.MobileLDRDynamicResolution with a new CVar, xr.MobilePrimaryScalingMode, which controls whether primary scaling is redirected to the HMD runtime (which will always use spatial scaling) when it would otherwise be unsupported.

  • Options are:

    • 0: Never

    • 1: DynRes Only (default)

    • 2: Always.

• Updated device profiles for standalone XR devices. They no longer inherit from each other in sequence, and the new Android_OpenXR device profile matches the Quest 3 profile which has had its shadow quality increased for dynamic shadows to draw by default in Mobile Preview and on Device. Consider lowering this value if dynamic shadows are not required.

• Improved expose passthrough support via the editor:

  • Added a new UENUM for environment blend modes, EOpenXREnvironmentBlendModeUpdate SetEnvironmentBlendMode() node to accept EOpenXREnvironmentBlendMode.

  • Added a new GetEnvironmentBlendMode() node.

  • Added a new GetSupportedEnvironmentBlendModes() node, which returns supported blend modes in an array in order of runtime preference (highest to lowest).

  • Added a new IsCompositionLayerInvertedAlphaEnabled() node.

  • Added an xr.OpenXRInvertAlpha checkbox to the OpenXR plugin settings.

  • Added an r.Mobile.PropagateAlpha checkbox to the Engine->Rendering->Mobile settings

  • Renamed OpenXRHMDSettings to OpenXR Settings, since it controls settings for the entire module.

• OpenXR is now building for all platforms:

  • The platform specificity of the openxr plugins and modules was problematic because content derived from these would not load on non-xr platforms for projects that are meant to be cross platform.

  • OpenXR is not actually platform dependent. It can be implemented on any platform. If it is present as a fully independent openxr runtime a small amount of platform specific code is needed to implement an openxr loader.

  • It is also possible to create an unreal plugin which either acts as an openxr runtime or is able to find an openxr runtime.

  • The plugins are still disabled by default.

Bug Fix:

• Removed permissions not allowed by Quest App Store.

• Fixed various debug draw elements failing to render when using Instanced Stereo or Mobile Multi-View:

  • r.VisualizeOccludedPrimitives

  • ShowFlag.Bones

  • DrawDebugBox and other similar calls, excluding DrawDebugString.

• Fix a bug where late update camera movements were not accounted for when calculating scene visibility, causing smearing, latency, or other artifacts when some rendering features were used.

• Fixed GetHMDData TrackingStatus field:

  • It was only checking if the hmd device tracking handle was valid, needs to check if the hmd is actually tracked.

  • It was also attempting to use the camera position rather than the hmd tracking position.

  • Removed GetMotionControllerData and FXRMotionControllerData which were deprecated in 5.5.

• Added handtracking permissions for Quest.

• Fixed OpenXR AddProfile for input always being given true rather than the passed in bHasHaptics parameter.

• Fixed a crash when using the SteamVR runtime with Vulkan.

• Fixed MetalViewport SubmitImmersive: [IOGPUMetalCommandBuffer setProtectionOptions:]:585: failed assertion `setProtectionOptions: with uncommitted encoder'

• Fixed Visionos cp_frame_query_drawable null handling:

  • We abandon the frame if the drawable is null, this indicates that the app is either being paused or exited.

  • Essentially we just continue the frame but don't call the cp_ functions.

  • At the beginning of the next frame we handle the state change.

Deprecated:

• Deleted the formerly deprecated functions from 5.3 to remove references to the UPlayerMappableInputConfig type.

Platform Mobile

Android

New:

• Added -FastIterate flag to Visual Studio/Rider/Quick Launch, to have libUnreal.so outside the APK, and made build iteration faster in general.

• Added -AndroidStudio flag to GenerateProjectFiles that generates a Gradle project that wraps around the original Gradle project that is suitable for use in Android Studio.

• The Android Vulkan detection logic now uses the same VkApplicationInfo parameters (e.g. App name, Engine version) as used by the VulkanRHI initialization, so graphics drivers that need to opt out of Vulkan for Unreal Engine apps can do so consistently.

• Implemented support for factoring screen rounded edges in computing the safe zone. The implementation means users can align the safe zone horizontally or vertically to the rounded edge excluded areas or to an average of both.

  • Additionally, cleaned up current safe zone implementation to determine size relative to the main view instead of the display as the system may reduce the main view to exclude cutout areas.

• Constrained kotlin stdlib dependencies to >= 1.8.0 to fix building issues.

• Recompiled libopenxr_loader with 16kb page support based on NDK 27.2.

• Removed need for security token for debuggable applications when using AndroidFileServer with UnrealAndroidFileTool.

• Added warning if a library on Android is not 16kb page size compatible.

• Removed bashrc/bash_profile related code, instead using zshrc for Mac as primary source of environment variables.

• Report resident size of "libUnreal.so+base.apk+[anon:.bss]+[anon:linker_alloc]" as ProgramSize on Android.

• Report resident size of all memory mapped files as MMIO on Android.

• Tag all virtual memory with "UE" VMA tag on Android.

• Added the vkquality 1.2.2 library which can be used as another data point as to whether to select Vulkan or OpenGL ES.

  • The result of the vkquality check is returned in the SRC_VKQuality that can be queried by the Android device profile selector rules.

• Updated AutoSDK "MinVersion" to NDK r27c.

• Improved AndroidFileServer (AFS) file transfer - retries and resumes for file push to device.

• Resolves potential sync issue that leaves the EditBox non responsive to text input and the keyboard in a state where it doesn't get dismissed its the 'Done' button.

  • Additionally, replaced setVisibility with add/remove View to work around an Android level spam issue when keyboard is repeatedly dismissed/invoked.

• Improved Android Camera Player with the Android Camera2 APIs and support for Vulkan frame data processing.

• Default NDK is updated to r27c, buildtools to 35.0.1, bundletool to 1.18.1.

• Recompiled libopenxr_loader with 16kb page support based on NDK 27.2.

• Replaced libhwcpipe with C wrapped .so to avoid C++ STL ABI conflicts on Android.

• Now starts loading libUnreal dependencies early for faster startup time

• Created Android-arm64/x64 configs in Visual Studio.

• Made Quick Launch now build an x86_64 binary when launching on x86_64 devices, such as the emulator.

• Lowered Android SDK "MaxVersion" to NDK r28c, due to NDK r29 compiler bug.

• Update GooglePAD to 1.15.4 / 2.3.0.

• Added engine device profiles for Mali-G1-Ultra and similar devices.

• We now detect devices using the ANGLE OpenGL ES driver and use the Vulkan deviceName string for SRC_GPUFamily. This means the device profile Vulkan selection can continue to match the same string as used when the device is in native OpenGL ES mode.

Bug Fix:

• Enabled desugar for older Android support.

• Filtered out AFSProject task if running it from Gradle (prevent second run).

• Ensured java sources are wiped when FirebaseEnabled is toggled off. Otherwise, source files are left behind that don't compile as the Java dependencies don't get populated by the plugin when FirebaseEnabled = false.

  • Additionally, registerBuildSettiings for the Firebase settings referenced from the plugin's UPL.

• Fixed the timing of firing the MediaOpened event in Android Camera Player.

• Fixed the issue that the Console Command input is disabled when "Show Launch Image" is off in Project Settings.

• Ensured keyboard OnTextCommitted messages are dispatched when using Android improved virtual keyboard.

• Ensured nativeKeyboardInputResult is invoked when keyboard is dismissed and keeps the reference to VirtualKeyboardWidget valid until the result is handled.

• Corrected issue with file locking in UnrealAndroidFileTool for writes.

• Fixed black screen when playing start movies.

• Added a watch for deletion complete before database close in Fetch2 (part of background downloading).

• Moved early load sync point to prevent possible crash due to an ordering issue.

• Made NDK toolchains detection for manual SDK installs more robust.

• Made JAVA_HOME environment setting for manual SDK installs more robust.

• Added missing setting of ndkPath to Gradle property value

• Fixed generated install scripts with overflow OBBs that are broken on non-Windows

• Updated Breakpad dump_syms with version supporting compressed symbols.

• Added catching of UnsatisfiedLinkError in GameApplication.LoadLibraries, in case some other ClassLoader has already loaded them

• Fixed the WebView freeze when switching the game to the background while loading a URL.

• Fixed VersionScriptFile not being created robustly, sometimes causing build failures.

• Worked around a Gradle bug whereby when only assets change, it attempts to patch the existing APK from previous packaging by adding asset deltas resulting in growth of the final APK payload. Workaround is detection of changes to assets and wiping the existing APK to force Gradle to repackage it correctly.

• Fixed a Java exception when closing the Camera Device during initialization.

• Fixed the "Play On Open" feature for the Android Camera Player.

• Fixed the keyboard EditBox layout on devices with cutout when the cutout area isn't used.

  • getWindowVisibleDisplayFrame returns a rectable in screen space, however, the edit box coordinates need to be provided in the main decor view's space.

  • As such, translate the results of getWindowVisibleDisplayFrame to the decor view's space by translating these by the decor view's screen position.

• libGPUCounters: Android early crash fix libGPUCounters is built with statically linked libc++, exposing a bunch of std symbols, which override those in libUnreal.so.

  • For example, it overrides std::to_string leading to an early crash:

    • Other plugin calls to_string (uses libGPUCounter implementation and its operator new & memory alloc).

    • That string is later destructed, using engine's operator delete.

    • Our allocator fatals on unrecognized pointer.

  • The fix is to add a linker version script to the libGPUCounters build and only expose C API related symbols as global.

• Updated Android TargetSDK Fix templates with AFS configuration.

• Updated Fetch2 3.3.0 with new version of androidx.room 2.7.1 (used for background downloading).

• Added detection of SQL lock error on enqueue (can happen after deleteAll in Fetch2 background downloading).

• Added new dump_syms_comp.exe supporting compressed Symbols for Android use.

• Fixed an issue with assets with starting offset other than 0.

• Made MakeApk do a clean during packaging if EnableBundle is flipped between builds.

• Fixed crash from pending JNI exception in non-Shipping builds, when skipping over checks.

• Now round rather than truncate Android getRefreshRate when converting to integer.

• Fixed the freeze of Android Media Player playback on Xiaomi 13T or devices with a similar chipset.

• Fixed TargetSDK 35 compatibility issues with background downloading.

• No longer requests WRITE_EXTERNAL_STORAGE permission if TargetSDK doesn't support non-scoped storage.

• Ensured that keyboard dismissed isn't called when the text input is accepted by the Virtual Keyboard's done key or a physical keyboard's enter key.

  • Additionally, ensured that on dismissal of the virtual keyboard, text entry type is Canceled so that text committal only triggers if the widget is configured with behaviour 'Text commit on Dismiss'.

iOS, tvOS, and iPadOS

New:

• IOS: Notification about network path characteristic FIOSPlatformMisc::OnNetworkConnectionCharacteristicsChanged can be used to know about network characteristic changes, e.g. knowing if a new connection is constrained or expensive.

• Re-enabled SetBytes and SetBufferOffset on iOS and enable on tvOS.

• Added support for Xcode26.

• The IOS rotation code now defers applying a new rotation until after we have rendered a new frame in the new orientation, for both auto-rotation and programmatic orientation selection.

  • This fixes the issue with a squashed aspect ratio when the user rotates the app at a time we cannot immediately render a new frame, such as during loading.

• Now ask for background time on iOS until all delegates called from applicationWillEnterBackground are invoked.

• Disallowed resolve of R32F MSAA targets as this format isn't MSAA resolvable in Metal.

  • Additionally, make the texture memoryless as we'll never be resolving to it.

• Exposed network changed delegate for iOS.

• Implemented functionality for -MetalPSOCache=use.

Bug Fix:

• Deferred handling of notifications if the engine isn't ready to receive.

• Occlusion Query Helpers now correct the number of frames for Metal mobile platforms.

• Ensured valid URL for pipeline cache save location.

  • The current invalid URL generated was invalid as it was constructing a file URL using the absolute string of another URL as a path parameter to the constructor, causing MTLBinaryArchive->serializeToURL to crash when used.

• Now store webauth credentials in iOS keychain using a key that does not change after uninstalls.

• Fixed some memory leaks in the iOS web browser.

Rendering

Architecture

New:

• Virtual Texture:

  • Renamed "r.VT.Support16BitPageTable" to "r.VT.PageTableMode".

    • The setting can now be modified live at run time instead of being read only.

    • Also removed "r.VT.SplitPhysicalPoolSize" which now corresponds to setting "r.VT.PageTableMode=2".

  • Unified mip color debug display for Virtual Textures.

    • "r.VT.RVT.MipColors" is deprecated and Runtime Virtual Textures now respect "R.VT.Borders" which other Virtual Textures already use.

    • "r.VT.Borders" is no longer on/off. The value now sets the debug border texel width.

    • Also added "r.VT.Borders.Mip" which isolates the mode to a single mip level.

  • Release/Recycle Virtual Texture spaces after they are unused for some time.

    • We don't release immediately to avoid cases during loading where this might trigger unnecessary Recreate/Resize work.

    • The old behavior was to never Release/Recycle unless we ran out of space slots.

    • Added "r.VT.SpaceReleaseFrames" to control this. The default is to release after 150 frames. Setting to -1 will return to the old behavior.

  • Changed draw behavior for selected meshes which only write to Runtime Virtual Texture.

    • Previously we would fully show those meshes on selection (they are hidden in the main pass otherwise).

    • Now we only show the selection outline.

• Runtime Virtual Texture:

  • The display name of the "Virtual Texture Builder" (also sometimes previously known as "SVT") asset is now "Streaming Runtime Virtual Texture" (i.e. SRVT). This avoids confusion with Sparse Volume Texture (SVT).

  • It can now be created from the content browser.

  • Now prevent StreamingTexture from being carried over when duplicating a RVT component (Save As, copy/paste...).  This avoids the common mistake of using another map's SRVT after a Save As.

• Added optional Z-increment parameter to FPixelShaderUtils::AddRasterizeToRectsPass, in order to control the Z of the quads (Z = quad index, i.e. instance id * ZIncrement). Combined with depth test enabled, this enables making the rasterization deterministic in case of overlapping quads.

Bug Fix:

• Runtime Virtual Texture preload requests now work for the adaptive page table case.

• Fixed programmatic RenderDoc captures randomly crashing.

• Fixed non DBuffer mesh decals not obeying the mesh component "Receive Decals" setting.

Lighting

New:

• Enabled VSM receiver masks for directional lights by default.

  • ~10MB memory overhead (depending on settings/scalability).

  • Often fairly significant performance improvements in uncached cases with lots of dynamic geometry.

• Disabled the selection of Virtual Textures on Rect Light components. These have never been supported in a cooked build, but were still shown in the Editor.

• Exposed Max Draw Distance and Max Distance Fade Range to Blueprint.

• Now store and propagate "cleared" flags to avoid reclearing pages we never wrote into; particularly relevant for receiver mask where we treat all dynamic pages as uncached but often don't write into them all.

• No longer allocate unnecessary receiver mask space if local light receiver masks are disabled.

• Refactored VSM ID allocation so that we can control the order more consistently. The immediate goal is to guarantee that directional lights get allocated first so that we can easily allocate receiver masks just for directional lights without the memory overhead of doing it for all local lights as well

• Added TexCreate_3DTiling flag to volume textures in TranslucentLighting to reduce memory and boost performance on some platforms.

• Marked r.UseClusteredDeferredShading and r.Mobile.UseClusteredDeferredShading as deprecated and added notification about future removal. Clustered deferred shading will be removed in a future release due to lack of utility to reduce maintenance burden.

Bug Fix:

• Fixed incorrectly reported one pass projection overflow with megalights active. Only run VSM coarse page marking once when there are multiple views as it is view-independent.

• Scale the light fade range by `GLightMaxDrawDistanceScale` to avoid lights becoming too dim at lower scales.

Lumen

New:

• Enabled half res integration on High scalability (r.Lumen.ScreenProbeGather.StochasticInterpolation 2).

  • This can soften normals in indirect lighting, and make GI a bit more noisy.

  • On the other hand it saves ~0.5ms on console at 1080p, which feels like a right tradeoff for High scalability intended for 60hz on console.

• Lumen Screen Probe Gather: Bent Normal Integration improvements (r.Lumen.ScreenProbeGather.ShortRangeAO.ApplyDuringIntegration 1)

  • Implemented r.Lumen.ScreenProbeGather.ShortRangeAO.ScreenSpace.FoliageOcclusionStrength.

  • Fixed EvaluateSHIrradiance which was causing brightening in corners.

  • Removed double AO apply during bent normal integration. Now instead of applying AO for the second time we apply only the GI approximation using AOMultiBounce, as DistantIlluminationRescale was too strong.

  • Clamp decoded AO as it could be larger than 1 causing too strong indirect specular occlusion.

  • Now support ShouldApplyDuringIntegration when Screen Probe Gather Integration and Short Range AO downsample factors match.

  • Fixed artifacts when ShortRangeAO is disabled, but ShouldApplyDuringIntegration is enabled.

• Lumen HWRT path now supports split screen.

• R.LumenScene.DumpStats 3 will now dump primitive culling information. This is useful, as it merges instances into a single entry making it easier to read the log.

• Moved GBuffer tile classification out into a single pass, which is also storing opaque history for the next frame. This pass is reused across Lumen and MegaLights for better performance.

• Screen tile marking optimizations, which speed up reflections, GI, and water reflections.

• Tweaked default settings:

  • r.Lumen.TraceMeshSDFs 0 - SWRT detail traces (mesh SDF tracing) is now a deprecated path, which won't be worked on much. For scaling quality beyond SWRT global traces it is recommended to use HWRT path instead.

  • r.Lumen.ScreenProbeGather.MaxRayIntensity 10 - firefly filtering is now more aggressive by default. This removes some interesting GI features, but also reduces noise, especially from things like small bright emissives

Bug Fix:

• Fixed missing subsurface energy by removing extra divide by PI. Now an emissive card matches a rect light reference of the same irradiance. This bug was only affecting Epic scalability (r.Lumen.ScreenProbeGather.IrradianceFormat 0 path).

• Fixed a bug on Mac platforms when running on SM5 using R11G11B10 for Typed UAV's causing rendering corruption.

• Fix visual artifacts and out of memory reads/writes when using non power of 2 Tracing Octahedron Resolution. Now Tracing Octahedron Resolution is always clamped to valid input values.

• Nanite Skeletal Mesh now supports bHasRayTracingRepresentation, so that those primitives can be skipped from Lumen under certain conditions.

• Fixed landscape culling stealing the r.Lumen.DiffuseIndirect.Allow's on changed callback. This is not needed anymore since this CVar's callback already invalidates all components, including landscape ones.

• Fixed tile artifacts on indirect specular on cloth pixels in the same tiles as hair pixels

• Don't reset temporal history on SceneTexturesExtent change. Sometimes SceneTexturesExtent can change due to inline view rendering (like water) which causes full history reset and results in visible noise on screen until things converge again.

• Skip creating RGS when Lumen is disabled from the PPV volume.

Materials and Shaders

New:

• Added an asset registry tag to find material instances causing shader permutations.

• Enabled Virtual Texture sampling on Volume material domains.

• Changed the interpretation of the PreSkinned Local Bounds material node when used on Instanced Static Mesh. Previously it was the bounds for the entire component. Now it is the bounds for the mesh instance.

• Added platform cached ini value to determine whether to compile 128 bit base pass pixel shader variations on platforms which require them. These are infrequently needed and turning them off can save 50k shaders / 15 MiB at runtime r.128BitBPPSCompilation.Allow (default is true, for backwards compatibility).

• Improved error messages reported by shader conductor to properly identify where individual error messages begin and end (and so ensure each compile error is reported on its own).

• Disabled the ZoomToFocus behavior when creating a usage node from the declaration - No longer zooms the focus of the editor since this was visually jarring for the user.

• Optimized material instance post-load in Editor builds by directly hashing the portions of shadermap ID used to construct the unique asset name, rather than constructing the full string representation then hashing.

• Added a Base field to Material Parameter Collections, which can be used to derive one collection from another, with the derived collection inheriting the base's properties.

• Added support for overriding a material's parameter collections with derived collections in material instances.

• Material scalar parameters can now optionally select an enumeration object to use for selecting scalar values by name in the material UI.

• Added default initialization of fields of FMaterialEnumerationEntry.

• Added function APIs to MaterialEditingLibrary to manipulate the new Enumeration material parameter.

• Reworked ShaderDebugData output to unify the "worker input" and "direct compile" debug mechanisms:

  • Removed r.ShaderCompiler.DebugDumpWorkerInputs cvar; always dump a valid worker input file for all jobs whenever debug info is enabled.

  • Moved writing of this file into job completion callbacks alongside the other debug artifacts, so will be written out for cache hits if r.ShaderCompiler.DumpDebugInfoForCacheHits is true.

  • Modified these files to not include a copy of the compressed source, instead using the .usf artifacts.

  • Renamed "direct compile" mode to "debug compile" and made it use this file instead of needing to serialize extra data into the debug .usf file.

  • Removed the r.DumpShaderDebugWorkerCommandLine cvar; all jobs will export a DebugCompileArgs.txt file containing the commandline that can be used to run SCW in debug compile mode by default.

  • Modified shader pipeline compile jobs to export a single worker input file (in the first stage's debug folder).

    • Each stage of a pipeline will export their own DebugCompileArgs.txt (for convenience, so if only a single stage fails you can still navigate to that stage's debug folder and run the job from there).

    • The debug compile for any pipeline stage will run the full pipeline job (so compilation always matches what happens in the normal context) with paths modified to be relative to that specific debug folder for convenience (so when downloading debug output from another machine, only one path in the commandline needs to be fixed up to run)

• When using the Material Editing Library of functions, now always refreshes the material instance editor when changing material instance parameters.

  • This fixes a bug where you would set a MI parameter via a python script and the MI Editor wouldn't update the properties panel to show the newly updated value.

  • Automatically call UMaterialEditingLibrary::UpdateMaterialInstance() whenever a parameter on a instance is set via the library.

  • UMaterialEditingLibrary::UpdateMaterialInstance should try to find any open material instance editors and tell them that the material instance has changed.

  • FMaterialInstanceEditor::NotifyExternalMaterialChange now calls `Refresh()` which will update the whole editor, including the property window, to properly reflect any parameter changes made by the library.

• Inconsistency fixed on Comment Bubbles on Material Editor:

  • To ensure visual consistency new Comment bubbles created use the same color value as the other node editors, like Blueprints.

• Material Editor: Added two experimental custom output nodes `Motion Vector World Offset (Per-Pixel)` and `Temporal Responsiveness` to give users a way to modify per pixel motion vectors and set how responsive the temporal history is.

  • Temporal Responsiveness: Describes how temporal history will be rejected for different velocity mismatch levels.

    • Default :0

    • Medium (0,0.5]

    • Full (0.5, 1.0].

    • Now, it will be used by TSR to change rejection heuristics. Translucency material can also use it to request higher responsiveness if depth is written (r.Velocity.TemporalResponsiveness.Supported=1) or clipped away (r.Velocity.OutputTranslucentClippedDepth.Supported=1).

    • The translucency mask generated improves TSR thin geometry quality.

  • Motion Vector World Offset (Per-Pixel): Works similar to the `Previous Frame` input of `Previous Frame Switch` but in the pixel shader. Regions with invalid velocity will be approximated with the current frame's offset.

    • This function currently supports non-nanite meshes only in non-basepass velocity write and is implemented in two passes. Use r.Velocity.PixelShaderMotionVectorWorldOffset.Supported to enable it.

• Added support for customizing the file name for ShaderSymbols and ShaderTypeStats output files.

• Exposed EMaterialProperty::MP_MaterialAttributes to Blueprints, Python, and the Editor UI.

  • This way users can use the Blueprint MaterialEditingLibrary to connect expressions to the MaterialAttributes output on the material block for materials that use MA.

• Added a MaterialEditingLibrary function called RenameMaterialParameterGroup and RenameMaterialFunctionParameterGroup which bulk renames all the Group Names on many Material Parameters at once.

  • Changed LogMaterialEditingLibrary verbosity to include `Log` messages.

  • Simply loop over all material expressions that are parameters and if the OldGroupName matches change the name to the new one.

  • Call RecompileMaterial to force the material to recompile so MIs update through the editor.

  • Unfortunately the `Group` property of material expressions is spread across many different classes. To avoid checking all the different material expression types (there are 8 different UMaterialExpression classes with their own unique Group), I've opted for a property system approach that looks for the property by name.

• Optimize pipeline cache to reduce single allocation size and improve performance by copying less data on resize.

• Modified output of shader formats using DXC (DXIL output) to keep the reflection data in the DXIL container if the r.Shaders.ExtraData cvar is enabled. This is a workaround for graphics tools which cannot correctly re-generate reflection information from external PDBs.

  • Note that this bloats runtime memory usage so should only be enabled locally if you are encountering issues seeing data formats (i.e. cbuffer layouts) in such tools.

• Can now copy/paste material errors in the PlatformStats panel.

  • Simply makes the text read-only "editable" so the user can select the text and get automatic copy/paste functionality.

• Rename the aliases for the Convert node from `Make Float4` to `Make Vector4` to match "Vector Parameter" and "Constant Vectors'.

  • This also avoids confusion with the existing Make Float 4 Engine Material functions.

• Added additional project-specific texture groups.

• Vector Parameter Expression now shows output pin display names to avoid confusion on what the first output pin is.

  • Also fixed "Convert to Constant" for vector parameters. By default the outputs are now:

    • RGB

    • R

    • G

    • B

    • RGBA

  • Users were expecting the first output pin to be RGBA, but it was RGB.

  • Now shows output name on pins by default for vector parameter.

  • Added RGBA output as the final one to match what TextureSample does.

  • Updated this behavior in the new material translator (it should really use the outputs array which is already defined).

  • If no channel names are specified show R, G, B by default.

  • No longer truncates and loses user data when using "Convert to Constant" for Vector Parameter -> Constant.

  • Gave constant 4 expression display names so the conversion code can match outputs by name when converting nodes.

• Marked deprecated virtual functions from MaterialInterface and FMaterial as final to avoid silent errors.

  • Modified all derived classes to override the right functions.

• Improved IO performance of FinishPopulateShaderLibrary.

• Added a new debug artifact (ShaderTypeStats.csv), dumped by default for all cooks to the ShaderDebugInfo folder for each shader format.

  • This CSV file contains permutation counts/code sizes for all shaders in the shader library, grouped by shader type.

  • Note that this is not directly representative of final shader memory usage since it doesn't account for potential duplication of bytecode introduced by the pak chunking step (where shaders used in multiple pakfiles will have a copy in each).

  • This is only intended to be used as a tool for tracking and comparing shader growth over time or between cooks.

• Subsurface Profile: Improved neighborhood validation for checkerboard when enabled, less bleeding into subsurface scattering region for low res.

Bug Fix:

• Virtual Texture Pending Mips debug view now takes screen scaling into account.

• Fixed UMaterialExpressionParticleSubUV::Compile bug that caused the node not to use the texture object connected to the Texture input pin.

• Repaired cook editor-only-data nondeterminancy in materials.

• Ensured that FDefaultMaterialInstance's CacheUniformExpression is cancelled on destroy if still pending.

  • Under certain conditions the FDefaultMaterialInstance could be destroyed and subsequent dispatch of CacheUniformExpression would result in a crash due to a dangling reference. This replicates functionality from FMaterialInstanceResource for which this guard is already implemented.

• Fixed a potential out-of-bounds read when remapping shader compile diagnostic messages; could occur if there were no digits before the end of the line in the diagnostic message after the __UE_FILENAME_SENTINEL marker.

• Fixed material shader map not releasing compilation ID if shaders failed to compile.

• Fixed incorrect reporting of line numbers when compile errors are encountered in generated material code.

  • The code calculating the line number offset of the substituted #line directive in MaterialTemplate.ush was incorrect.

• Fixed a bug that could cause a retry loop when running with shader development mode enabled and a preprocessing failure is encountered.

• Fixed crash in SafeRenameEditorOnlyData() when EditorOnlyCurrent is null.

• Fixed a material derivative autogen crash when dealing with uints.

• Fixed a crash occurring when the material parent of an instance is changed through scripting.

• Fixed ShadingModel material expression in-node combobox to display only valid shading model entries.

• Made a minor fix for custom ShaderTypeStats customized name, needs to lookup cvar by ShaderFormat.

• Added support for Nanite Geometry Collections to Preskinned Local Bounds material node.

• Fixed an issue where the Vulkan shader pipeline cache would sometimes incorrectly produce cache misses for shaders that had already been compiled and serialized.

• Fixed shader output for preview/transient materials being cached in DDC.

• Changed UMaterialFunctionInterface to include the BlueprintType annotation.

• Removed incorrect application of the component scale to the output of World Space Vertex Normal node when used with skinned mesh.

• Fixed an uncommon crash in Lerp material expression when the alpha pin was connected to a non-primitive output.

MegaLights

New:

• Implemented MegaLights-driven VSM marking to only mark VSM pages that MegaLights has selected samples for.

• Added the r.MegaLights.DownsampleCheckerboard, which can run sampling/tracing at half res (every other pixel). It's a good middle ground between default quarter res sampling and option full resolution sampling.

• Exposed r.MegaLights.HardwareRayTracing.ForceTwoSided, which allows to flip between matching raster behavior and forcing two-sided on all geometries in order to speedup tracing.

• Now always vectorize shading samples. This saves on average 0.1-0.2ms in complex content on current gen consoles.

• Improved spatial denoiser filtering after disocclusion.

• Limited number of samples sent towards the directional lights to a specified fraction (r.MegaLights.DirectionalLightSampleFraction). This helps with noise indoors, where there's a strong directional light inside taking over the entire sampling budget.

• Now uses downsampled neighborhood for temporal accumulation. Interpolated pixels don't add much to neighborhood stats, so we can skip them, improving quality by effectively using a wider neighborhood filter. This also improves performance of the temporal accumulation pass, as it now can load less data into LDS.

• Now properly handle invalid sample upsampling. Sometimes during upsampling we can't find any valid sample and need to fallback to history (without any neighborhood clamp). This makes lighting on highly detailed or thin geometry a bit sharper and a bit more stable.

• Disabled guiding tile filtering and added stochastic bilinear sampling of guiding tiles in order to hide tile artifacts.

• Now merge identical rays in order to avoid overhead of duplicated traces. Duplicated rays happen with strong point lights, where we may send a few identical rays to the same light doing unnecessary work.

• Added screen space trace for hair (r.MegaLights.Hair.ScreenTraces). Screen space traces improve card hair quality compared to approximate RT fallback mesh, but can be noisy. In order to reduce the noise there's now extra hair only screen space trace bias (r.MegaLights.Hair.ScreenTraces.Bias).

• Merged downsample factor / checkboard CVars into a single r.MegaLights.DownsampleMode CVar.

Bug Fix:

• Now require ray tracing platform support, in order to skip compiling and cooking MegaLights shaders on certain platforms.

• Fixed split screen crash due to out of bounds memory reads.

• Fixed denoiser artifacts on borders between dielectrics and metals (bright outlines) caused by too aggressive material demodulation factors.

Nanite

New:

• The dithered opacity mask option is now supported for Nanite rasterization.

• Added a new culling check that can improve Nanite culling speed and reduce the amount of memory needed for candidate clusters (r.Nanite.Culling.MinLOD).

• Added support for rendering Nanite skinned meshes in the animation editor.

• Exposed NanitePixelProgrammableDistance for Nanite skinned meshes to enable forcibly disabling pixel programmable rasterization of Nanite when the mesh is further than a given distance from the camera.

• Added experimental and optional passes to prime the HZB before VisBuffer rendering if the HZB is missing (e.g., due to a camera cut), see cvar r.Nanite.PrimeHZB et al.

  • The main idea is to draw a lower resolution (HZB or lower) and lower detail (by using LOD bias and/or drawing only ray tracing far field scene geometry).

  • This new render is then used to build a HZB with some depth bias that is then used to render the full scene, greatly improving the cost in many cases.

• GeometryCollection: Added a "Nanite Minimum Residency" setting for Geometry Collection assets. This controls the number of resident nanite root pages.

  • Previously we used a single root page and this is still the default.

  • Increasing the value can avoid pop-in when a Geometry Collection is first shown.

• Added support for disabling "Render In Main Pass" on static mesh components for Nanite meshes.

Bug Fix:

• Fixed a bug where the World Position node would return incorrect results when used to calculate opacity in a masked material.

• Automatically disable Software VRS when Nanite is not enabled, preventing it from generating shading rate images which will not be used.

• Fixed a rare streamer crash that could occur when a streaming page is resident in the streaming pool while its root page slot gets reused a multiple of 256 times.

• Invalid page requests from the GPU are now ignored and optionally logged, instead of potentially resulting in a crash.

• Suppressed console warning spam when `r.Nanite.Visualize` is set to an invalid value.

• Fixed an incorrect conservative instance draw distance test used in the hierarchical instance culling that caused missing instances.

• Nanite: Fixed incorrect geometric normal when using r.RayTracing.Nanite.Mode=1.

• Fixed a GPU crash that could occur when Nanite was rendering to odd viewport sizes.

• Fixed a crash in Nanite primitive filtering that can happen if HLOD force-hidden primitives, or the view's ShowOnlyPrimitives/HiddenPrimitives, contain invalid primitive IDs when there are no primitives in GPU scene.

• Fixed a regression where if a static mesh has multiple mesh sections of the same material, Nanite build would merge them into a single mesh section, which could cause them to be re-ordered and cause issues. Now the multiple mesh sections remain intact, but the fallback will not have triangles in the duplicated sections.

• Fixed an issue where the sign of the TwoSidedSign node would be flipped for masked materials.

• Fixed a crash caused by enabling a Nanite visualization mode when instanced stereo rendering is enabled.

• Fixed an issue where MaxHierarchyDepth was not calculated correctly, which could under rare circumstances result in streaming not progressing beyond a certain point.

• Fixed an issue where having a non-Nanite capture in the scene can cause the Nanite streamer to not get updated and result in GPU hangs.

• Fixed an issue where scene captures and main view rendering would independently try to update residency, sometimes resulting in visual artifacts.

Niagara

New:

• CascadeToNiagaraConverter: Can now add template emitters.

• Supported read / write icons for stateless: You can now more easily see where bindings are used in LW emitters.

• Added a way to release resources from render target 2D:

  • Changed handling of null texture to set the material default to avoid dangling references.

• Removed slate dependency from emitter merging (used by python scripts), which could trip up commandlets that ran without the editor UI.

• Other distribution types can now opt into indexing / address / interpolation.

• Initialize particle add lookup value mode options:

  • Added initial look up value mode enum.

  • Enabled lookup on initial position.

  • Changed color to a distribution.

• Added getter method for Niagara parameters.

• Lazy instantiate parts of the baker to reduce memory usage:  Added a call to tick the baker world as paused, this ensures the world manager is called to process clean up functions.

• Arrays for LW distributions:

  • Made a large refactor to make reading a distribution a function call vs a structure.

  • When sampling a value needed for motion vectors pass in multiple time parameters and it will return both values to ensure random is respected.

  • Some limited space was added to pack indexing into the data, this can be controlled using meta data on the distribution property.

  • GPU storage moved to ByteAddressBuffer for LoadX operations which gave a small speed boost.

  • Perf on a large number of particles was marginally better vs before.

• LWE:

  • Added support for debug HUD particle attribute display.

  • Added support to data set readback.

• Adjusted display name for SKM / SM DIs to remove confusion between the asset types.

• Changed pin color based on Data Interface vs UObject to reduce confusion.

• LWE Shape Location Changes:

  • Added shape scale.

  • Fixed plane shape not applying rotation.

  • Added surface mode to the cylinder.

• Material Parameter Collection Data Interface: You can now push scalar / vector parameters from Niagara to MPCs.

• Removed UNiagaraEmitter from stateless emitter on cook.

  • The cooked build does not require them, various parts of the UI still make assumptions and will be cleaned up.

  • This saves ~4k per stateless emitter.

• Added rotator distribution to stateless & use in shape location to allow the rotation to be bound to an attribute.

  • Fixed the axis not properly being used on the display name for each widget.

  • Fixed the same binding being added multiple times.

• Niagara Editor Preview Actor:

  • Used for previewing and tuning Niagara Systems without the need to run PIE.

  • Has some simple default motion options which can be overridden by a derived Blueprint for more complex behavior.

• Niagara Fluids: Added vector controls for turbulence frequency and gain.

• Niagara Content: Added distribution curve dynamic inputs for float, vector, and vector2D types.

• Weighted Distribution Int Array:

  • Each entry has a value & weight.

  • The Weight is used in the random calculation, so the higher the weight the more likely it is to return that value.

• CascadeToNiagaraConverter: Added UPROPERTY() tags.

• When changing the preview platform, now invalidate the cooked status.

  • We need to make sure everything is in sync when the device profile changes to avoid crashes inside the VM.

• Added Niagara to Visuals placement menu.

• Updated Stateless Rotate Around Point module:

  • Added coordinate space / rotation / center.

  • Added a CPU path for the module.

  • Added Debug Draw support.

• Added a property to customize quick capture number of frames.

• Added ID support to Sim Cache Reader.

• Added wildcard name match exclusions to sim cache compare.

• Validation rules can now be disabled by config file.

• Added information about who is using sorting.

  • Added a marker to sort key generation.

  • Added a console variable fx.Niagara.Batcher.DumpSortedSimulations which can be used to dump to the log.

• Changed the color grad editor stop time widget to use the spin box.

  • This allows for math operations and validation of the input data.

• Dynamic Mesh Sim Cache Storage + Visualizer.

• Added all base Niagara float types to sim cache interpolation.

  • Enabled by default can be disabled by changing bInterpolateAllTypes in the creation parameters.

  • This improves MRQ renders with temporal samples.

• Added concurrent sim cache reading when no data interfaces are cached.

  • Can be disabled using "fx.Niagara.SystemSimulation.AllowASyncSimCache".

  • Enabled concurrent execution for fixed DT systems if it's a single tick.

  • Fixed a bug in the component recaching where it ran all the time in the editor.

• Stateless Curve Editor Improvements:

  • Moved the existing LW curve editor into the compact curve editor.

  • Added a new curve editor for distributions which is closer to the existing curve editor.

  • Exposed some of the common widgets shared between the editors.

  • Future change will be to wrap the DI inside the distribution adapter and share the editors, which will be useful for the compact editor also

• Made the FXSystemInterface sharable to fix world tear down reference issues.

  • In some situations an FX component can be destroyed after the world.

  • When the world is destroyed it will destroy the FX system set, which will enqueue a command to destroy the FX interfaces.

  • The render command can execute before the FX component's are destroyed leaving them with a dangling reference.

• Added a setting to enable HLSL 2021 in Niagara.

  • HLSL 2021 features will fail to compile on the VM and on some platforms, but this allows users to experiment.

• Added an enum for notify progress, none / forward / reverse.

  • Fixes issues around using negative rate scaling and allows the user to still use 0-1 when playing backwards.

• Disable Source Mode with LWE to reduce confusion.

  • We don't have a particle stack so there is no way to modify the data without binding to system / user parameters.

• Added console commands (fx.Niagara.Component.ReinitializeActive & fx.Niagara.Component.DeactivateActive) to allow a quick way to kill / restart Niagara components.

  • Cleaned up various console variables while I was here.

• Niagara: Properties (Section Start Behavior, Section Evaluate Behavior, Section End Behavior, Age Update Mode, Allow Scalability) in UMovieSceneNiagaraSystemSpawnSection can now be set in Blueprints / Python.

• Multiply the debug draw color by alpha so we can have translucent lines.

• Now send the current bounds to the GPU for the emitter properties DI.

  • This makes the result of GetBounds consistent between both paths when using fixed bounds on the emitter.

• Removed stateless emitters from compilation.

  • Previously they would still generate some HLSL data resulting in compilation when added / removed.

  • Cleaned up several areas that assumed Emitter Data would always be valid.

• Made renderer memory savings by reducing FNiagaraVariableAttributeBinding.

  • Sprites 1992 -> 1320 = 672

  • Mesh 1688 -> 1160 = 528

  • Ribbon 1888 -> 1312 = 576

  • Light 800 -> 560 = 240

• Added a rule for validating material usage in renderers.

  • This makes it possible to block content that does not have the appropriate usage flags set.

• Niagara Content:

  • Added a new dynamic input to support querying values from the new Weighted Distribution Int Array data interface.

  • Added new modules for spawning particles from simulation caches.

• Removed all the async optimize / decompression of VM byte code.

  • The new VM does not use this path so the code is dead.

• Enabled Sub UV cutouts ES3.1.

• Can now use the Niagara Data Interface to set material parameters on Material Instance Dynamic objects, from a CPU stage.

• CascadeToNiagaraConverter: Add more script input types.

• Added Shift+D to enable selected emitters (reverse of D which disables selected emitters).

• Refactored renderer widgets to share code and use small chip

• Added a menu entry when we have no stateless bindings to make it clear to the user what type we are looking for.

• Added a debug draw to renderers.

  • Implemented debug draw for light & decal renderer.

• Added column sorting to sim cache viewer.

  • Also cleaned up how we build the table data to make it less confusing.

Bug Fix:

• Fixed issue where ParticleSystem EPSUM_FixedTime had no effect due to incorrect assignment.

• Fixed validation accidentally changing usage with flags on materials.

  • CheckMaterialUsage will both check and set which can result in a race with shader compilation.

• Use the component transform for local space vs the simulation one - When disabling requires current frame data (for performance) these could be out of sync, which mismatches other renderers on the RT (i.e. sprites & meshes)

• Fixed hash function in data channel to use full string data instead of just half of it.

• LWE: Set the sim target on the compiled data set to match the mode.

  • This fixes a mismatch that can cause attributes to not upload to the GPU when we are in CPU mode due to using the light / decal renderer.

• No longer call the OnSystemFinished delegate if we are constructing Blueprints.

  • The delegate might interfere with the actor / components and can cause crashes.

• Shader loading: Now prevent dereferencing potential nullptr when file is not found.

• Fixed emitter renderer tick ordering issue when combined with LWE.

• Added missing postload calls for stateless emitters.

• Guarded against using EmitterData as it can be nullptr.

• Fixed binding buffer changes causing dispatches to serialize on some RHIs.

• Fixed potential OOB reads if a binding is invalid.

• Added a lock to GPU Sort Manager AddTask to ensure no concurrent access.

  • This fixes a race between Niagara & Cascade adding tasks.

• Now calculate spawn probability per particle for spawn rate, rather than per loop.

• Fixed user variables being removed and renderers not updating correctly.

  • The variable was without namespace so failed to match.

• Added a missing null check for the graph source that can happen during undo.

• Fixed GetResourceSizeEx miscalculating for non-isotropic UTextureRenderTargetVolume.

• Niagara component renderer: now only register one object replacement delegate with the CDO to prevent races during asset loading.

• Added missing CanBind to user parameters.

  • Changed style of binding to be more consistent with other bindings.

• Now sets the world time information in the baker.

  • This fixes things like Engine.Time always being 0.0 and material based time effects not working as expected.

• Used GroupMemoryBarrierWithGroupSync with Radix Sort to fix issues on various GPUs.

• No longer load niagara system when getting asset registry tags, to prevent deadlocks during emitter merging.

• Disabled low latency when anything other than the lit view mode is active.

  • Some of the view modes short circuit rendering so the data may not be ready in time.

• Fixed a crash when copying script variable metadata.

• Handled null data interface inside Niagara Variant.

  • It is unclear how the variant DI becomes nullptr at the moment, this will at least avoid crashing the editor, but more investigation is required to understand why.

• Fixed duplicating an emitter with RunUpdateScript set for interpolation mode changing post duplication to NoInterpolation.

• Fixed single segment GPU ribbon UV calculations being incorrect.

• Fixed a potential use-after-free on world tear down.

  • If the compute interface is marked pending kill we can ignore sending the command to remove from the computer interface as it will be killed before.

• Fixed an asan issue using the component in the lambda.

  • Bring changes over for garbage references also.

• Fixed incorrect stride with FRibbonAccumulationValues when using different features.

• Fixed color curves not working inside NPCs when using GPU emitters.

• When modifying parameters in the detail panel, now use the editor setting GetResetSimulationOnParameterChange to see if we should reset the system or not.

  • Disabling reset can be useful to iterate on content live.

• Fixed editor undo crashing due to order being out of sync and the thumbnails.

• Fixed update context killing systems that are waiting for compilation.

  • When switching preview modes the update context is called multiple times.

  • The first time it's considered active.

  • The next time it's no longer active but is waiting for compilation (compontent ticking) so is now removed from the reactivate list.

  • We now check if the component tick is enabled due to waiting for compilation results.

• When setting up previous data use current if previous does not exist.

  • Current changing to a new position binding which does not have a previous value generated it would use the default position which is 0,0,0. Using the current value won't produce corrupt motion vectors, but will also not produce correct motion vectors.

• Changed default for LOD size Y to -1 to fix issue with meshes being culled incorrectly.

  • A value of -1 indicates that it will never be culled by screen size.

  • The previous value of 2 would be adjusted to 1.0 and fail the >= screen size test if bounds were large enough.

• Now uses the aliased variable when finding the default mode

  • This fixes an issue if the first time a variable was encountered it was in StackContext as we would ignore the binding.

• Fixed a bug where min instead of max distance was used as LoD parameter.

  • Fixed a nullptr and weak ptr bug in error log format.

  • Fixed a bug when an error during script merge occurs.

• Fixed memory leak in data channel object destructor.

Path Tracer

New:

• Improved the adaptive sampling heuristic.

• Added an option to hide the planet ground surface.

  • When using reference atmosphere mode, the path tracer no longer displays a large ground sphere to represent the planet for better parity with the deferred renderer.

  • The old behavior of showing the planet ground can be accessed by the cvar r.PathTracing.EnableAtmosphereGround.

• Post-process materials can now be specialized for the path tracer.

  • This adds a permutation of the PostProcess Material that is used when the path tracer is enabled on the view.

  • This can be used to account for differences in how the path tracer creates the image. Behavior can be customized with the PathTracingQualitySwitch node.