Notas de la versión de Unreal Engine 5.7

Novedades

El lanzamiento de Unreal Engine 5.7 sigue mejorando el conjunto de herramientas de UE5. Esta versión ofrece mejoras en una amplia variedad de áreas, como el renderizado, los personajes y la animación, la construcción de mundos, la generación procedimental de contenido y mucho más.

Esta versión incluye mejoras enviadas por nuestra comunidad de desarrolladores de Unreal Engine en GitHub. Queremos dar las gracias a todos los colaboradores de Unreal Engine 5.7:

AlexanderVeselov-arm, AlexBlackfrost, Almax27, andreibazi, az6667, Bit-Rot, Brian-PD, brpendle-ti, bturner, chrysos8201, ckendal3, ColinGulliver, CookiePLMonster, Darcy3000s, dasherman-ea, davidbaack, dmergele, DoubleDeez, DrewWeth, DTG-Will-Marshall, dyanikoglu, erebel55, Eric2-Praxinos, Erlandys, faisa-believer, foobit, gamethread, geordiemhall, glecko, GreenLightning, guansdu, H3mul, IngSubstance, iniside, jamesfAnet, jamespark-unreal, JasonCoombs, jdamdami, jerobarraco, jeysym, Jiboo, JohnJFarrow, Jordonbc, jorge-axiomvfx, jorgenpt, jpritchard1010, KaosSpectrum, KarimLUCCIN, KeithRare, kimkun07-k, kissSimple, klukule, KXOC, laurencei, lclara-BARB, LHG-JonAnderJimenez, ligazetom, LightKL, lsandersljungberg, LucaFranzo98, Maigo, MarcusSvensson92, Mario-Azcona, MartinWickhamFB, Mattiwatti, melku, michael-buschbeck-ms, Minus4-44, moumee, nickdarnell, phochstrasser, PICO-XR, QRare, r457-Ao2, rdunnington, reduf, redxdev, RiotJDebern, rohyunsang, sareali, serhanio, SilverWinter0511, slonopotamus, SoulSharer, sportbikerr1, ssutherland-riot, SukenderDontNod, Sythenz, teddemunnik, tioez326, tokyocplusplus, Tt-Wes, tustanivsky, Vaei, vladbelousoff, vogoltsov, WangKan, Wizzard033, wmiller, x157, yangskyboxlabs, yoonbigbear, zachlute-arenanet, ZeroEightSix, ZeroErrors, zhou-

Renderizado

MegaLights (beta)

MegaLights ya ha entrado en fase beta con mejoras en la reducción de ruido y el rendimiento general. Además, esto proporciona compatibilidad con las siguientes funciones:

• Luz direccional

• Sistemas de partículas de luz de Niagara

• Traslucidez

• Mechones de pelo

Volúmenes heterogéneos de Niagara

Volúmenes heterogéneos ahora está en fase beta. Esta actualización se centra en mejoras de las sombras proyectadas con las siguientes nuevas funciones:

• Sombras en cascada para la luz direccional.

• Compatibilidad con mapas de sombras opacas para la escalabilidad épica, lo cual permite:

  • Una mejora considerable en el tiempo de creación de sombras.

  • La consulta de sombras en tiempo constante.

• La pasada previa de máscara de sombras, que elimina la presión de registro vectorial de uso general añadida en la iluminación diferida.

• Para habilitar la proyección de sombras ya no es necesario reiniciar el editor ni compilar el sombreador.

Substrate

Los materiales de Substrate, que están listos para producción y habilitados por defecto a partir de UE 5.7, representan un marco de materiales modular y con base física que sustituye los modelos de sombreado fijos por un sistema diseñado para ofrecer un control expresivo, un rendimiento escalable y flexibilidad a largo plazo.

Es compatible con dos trayectorias de renderizado: 

• El GBuffer adaptable, que permite funciones avanzadas como la topología por píxel y los cierres por capas en hardware moderno.

• El GBuffer combinable, una alternativa simplificada que garantiza una amplia compatibilidad con diferentes plataformas.

Follaje y skinning de Nanite (experimental)

El follaje de Nanite es una trayectoria de renderizado puntera en el sector cuyo núcleo está formado por tres sistemas integrales:

• Montajes de Nanite, que gestionan las instancias de partes del follaje como una unidad cohesionada.

• Skinning de Nanite, que determina el comportamiento dinámico que tendrá con sistemas como el viento.

• Vóxeles de Nanite, que son vóxeles del tamaño de un píxel capaces de conservar detalles, la animación y las características de los materiales en función de la distancia a la cámara, todo ello a una fracción del coste original.

Al combinarlos, permiten imaginar unos mundos más sólidos con follaje animado realista que puede ir a 60 fps en el hardware de la generación actual.

Nuevas funciones:

• Montajes de Nanite para compilar recursos de follaje mediante partes con instanciado con el fin de mantener el tamaño de los recursos reducido.

  • API de Blueprint para compilar montajes de Nanite.

  • Además, hay herramientas del editor que facilitan la creación de montajes de Nanite a partir de selecciones.

  • Compatibilidad con el importador de USD. Esquemas USD expuestos que utilizar en herramientas de DCC con el fin de marcar escenas para importarlas como montajes.

• Viento dinámico controlado por mallas esqueléticas: los árboles son mallas esqueléticas y el nuevo complemento Dynamic Wind permite que el viento procedimental afecte a sus huesos.

• Vóxeles de Nanite para un renderizado eficaz de la geometría del follaje en la distancia.

• Detección de geometría delgada (TSR) para manejar mejor el follaje.

SMAA (experimental)

Los renderizadores para móviles y de escritorio ahora son compatibles con el antialiasing morfológico a nivel subpíxel (SMAA). Puedes habilitarlo con el renderizador para móviles mediante la CVAR r.Mobile.AntiAliasing=5, y con el renderizador de escritorio con la CVAR  r.AntiAliasingMethod=5.

Esta función mejora la fidelidad visual al proporcionar un suavizado de bordes de alta calidad con un impacto mínimo en el rendimiento, lo que la convierte en una técnica eficaz para los juegos móviles.

• El antialiasing SMAA está habilitado en todas las plataformas.

• Configura los ajustes de calidad con r.SMAA.Quality.

• Configura la detección de bordes entre color o luminancia con r.SMAA.EdgeMode.

• Mejora el suavizado de bordes sin un gran coste para la GPU.

Ahora mismo es una función experimental. Los ajustes de calidad permiten equilibrar el rendimiento y la fidelidad visual.

Personajes y animación

Integración de selectores de Motion Matching (experimental)

En UE 5.7, hemos incorporado nuestra primera versión de Motion Matching integrada en los selectores para que los usuarios puedan controlar qué recursos son válidos para su selección en Motion Matching, algo que versiones anteriores solo era posible en la base de datos y no en recursos individuales.

Esto implica que puedes buscar la mejor pose, pero también filtrar los resultados por recurso en función de condiciones adicionales, como lógica de juego, a través del selector.

Un nuevo campo de Pose Search en los selectores gestiona esta complejidad, junto con la depuración integrada de Motion Matching en los selectores.

Esta función es experimental.

Blendshapes y herramientas para esculpir

Hemos incorporado la flexibilidad de los procesos de trabajo estándar para esculpir del sector a Unreal Engine. Esta es una actualización de las herramientas del editor de esqueletos que ahora ofrece la posibilidad de crear y editar formas de transformación, huesos y pesos de piel de sin problemas.

• Desplázate al instante entre colocar huesos, pintar pesos y esculpir blendshapes en una malla esquelética.

• Nuevo panel de Morph Targets.

• Las formas se adaptan a los cambios en la topología de la malla.

• Equipa a los animadores con herramientas expresivas para obtener resultados con calidad de estudio.

Colisiones del mundo para la física del rig de control

Incorpora colisiones de nivel en tus simulaciones de física del rig de control. Utiliza la geometría del mundo existente y los cuerpos de física para crear contactos, empujes e interacciones creíbles.

• Compatibilidad con colisiones del mundo en la física del rig de control con interacciones unidireccionales.

• Utiliza mallas de nivel y cuerpos de física como colisionadores.

• Controla el contacto con los elementos, el suelo y el entorno durante la simulación y la reproducción.

Vista de dependencias del rig de control

Comprende cómo se conectan y actualizan los elementos del rig en el tiempo con una vista de dependencias específica. Visualiza las relaciones entre controles, huesos y módulos para simplificar la depuración.

• Explora las relaciones padre-hijo y los metadatos de un vistazo.

• Depura rigs y módulos con una mejor visibilidad del flujo de datos.

• Visualización de la estructura de dependencias conocida.

Rendimiento de cinemática inversa de cuerpo entero y reposicionamiento

Hemos añadido mejoras de rendimiento y control a la cinemática inversa de cuerpo entero y al reposicionador de IK, lo que permite realizar reposicionamientos de manera eficiente en tiempo de ejecución.

• Mejora las poses con la cinemática inversa de cuerpo entero sin un gran coste de rendimiento (aproximadamente un 20 % de aumento de velocidad).

• Utiliza el solucionador de estiramiento de extremidades en el rig de IK para lograr realizar reposicionamientos eficientes en tiempo de ejecución.

• Utiliza el modo de rotación de cinemática directa Copiar local para una trasferencia de rotación más rápida por cadena.

• Habilita la generación de perfiles en la pila de reposicionamientos.

• Añade un umbral de LOD por operador de reposicionamiento.

Mejor contacto del pie y reposicionamiento proporcionado

Hemos mejorado el reposicionador de IK para mejorar la gestión del contacto con el suelo y los personajes de gran tamaño,

lo que permite una mejor transferencia de la animación a una gran variedad de personajes, para que puedas realizar la dirección artística con una mayor rapidez. Ahora es posible hacer lo siguiente:

• Definir la altura de la entrepierna para evitar que la pelvis choque contra el suelo y mantener el movimiento vertical.

• Añadir la restricción del suelo a los pies para mantener la posición vertical cuando se está cerca del suelo.

• Utilizar el modo de traslación de cinemática directa Orientar y escalar para transferir los datos de traslación de los huesos.

• Añadir el operador Estirar cadena para hacer coincidir la cadena de reposicionamiento de origen o escalarla.

• Utiliza el solucionador Estirar extremidad para controlar el aplastamiento y el estiramiento de las extremidades.

• Cambiar el punto de traslación de la escala de origen a otro hueso para la captura de movimiento o el juego.

• Añadir el operador Filtrar huesos para eliminar el ruido de alta frecuencia al el reposicionar personajes de gran tamaño.

Reposicionamiento sensible al espacio (experimental)

El reposicionamiento sensible al espacio ofrece a los artistas una forma de transferir animaciones entre distintos personajes sin tener que preocuparse por autocolisiones,

lo cual reduce la necesidad de limpiar la animación después de un reposicionamiento.

• Hemos añadido un operador Interacciones de cuerpo para impulsar los objetivos de IK utilizando la física para evitar las autocolisiones.

• Hemos añadido un operador IK relativo para desplazar los objetivos de IK en relación con las longitudes de contacto desde el origen hasta el destino.

Validador de secuencias (experimental)

El validador de secuencias ofrece a los artistas de cinemáticas una forma de comprobar si hay errores de contenido en sus secuencias. Reduce la cantidad de posibles problemas que pueden surgir durante la producción mientras se trabaja con Sequencer.

Al utilizarlo podrás:

• Poner en cola varias secuencias y sus jerarquías de secuencias para detectar posibles problemas.

• Comprobar si las secciones de una secuencia no están en la toma o el intervalo de reproducción.

• Verificar si hay vinculaciones o recursos sin asignar en las secciones.

• Confirmar si las secciones comienzan o terminan en fotogramas completos.

• Revisar los resultados e ir directamente al lugar donde se encuentra el problema en cada secuencia.

Mejoras en la experiencia de usuario de la curva de suavizado (beta)

Ahora puedes utilizar la herramienta Curva de suavizado del diseño de grafismos en movimiento en Sequencer. Puedes habilitarla con el complemento de curva de suavizado.

Además, esta actualización ofrece comportamientos más coherentes para una mayor facilidad de uso, lo que permite una iteración más rápida.

• Utiliza la herramienta Curva de suavizado para aplicar y guardar diferentes preajustes de curva de suavizado en Sequencer, el editor de curvas y UMG.

• Ajusta la escala de forma similar al panel Detalles en el árbol de Sequencer mediante el bloqueo de escala.

• Hemos mejorado la visualización del cronograma de las jerarquías de secuencias para mostrar tanto el tiempo actual como el de la secuencia padre.

• Amplía las funciones de Blueprint y Python para acceder a los estados de seguimiento (Solo, Silenciar, Desactivar, Bloquear y Fijar).

• Hemos mejorado el baking de transformación para incluir el salto en el tiempo.

• Hemos añadido las nuevas columnas ID de vinculación e ID de secuencia a la herramienta de navegación.

La herramienta Curva de suavizado se encuentra en fase beta.

Mutable sin datos (experimental)

Acelera la iteración y optimiza el proceso de trabajo con objetos personalizables sin datos. Las entradas de parámetros se gestionan en tiempo de ejecución en lugar de en tiempo de compilación, lo que te permite obtener compilaciones más rápidas, un mejor cifrado y paquetes más pequeños.

• Convierte cualquier objeto personalizable en uno sin datos.

• Disfruta de tiempos de compilación más rápidos con la gestión de parámetros en tiempo de ejecución.

• Utiliza el cifrado y el empaquetado exactamente como cualquier otro recurso de UE.

Conjuntos de selección

Los animadores necesitan acceder rápidamente a múltiples selecciones a lo largo de todo el proceso. Puede tratarse de múltiples controles en un rig, pero también de múltiples controles o transformaciones en distintos recursos. Actualmente, los animadores dependen de herramientas personalizadas, como los selectores de GUI, para realizar esta tarea, por lo que queríamos crear una versión más nativa, similar a los complementos populares de otras herramientas.

Calidad y experiencia de usuario en el modo de animación

Hemos implementado mejoras en el modo de animación.

Hemos consolidado las herramientas Restricciones, Cambio de espacio y Acoplador en una nueva ventana denominada Restricciones.

También en relación con las restricciones, hemos añadido algunas opciones nuevas al proceso de creación.

• Fotograma actual: esta era la funcionalidad estándar anterior. Crea una clave de activación en el fotograma actual y compensa todas las claves posteriores.

• Desde el inicio (nuevo): toma el desfase del fotograma actual y lo introduce en el primer fotograma de la toma en lugar del fotograma actual.

• Infinito (nuevo): no añade claves. En su lugar, aplica el desfase del fotograma actual a toda la secuencia.

La biblioteca de poses, las herramientas de interpolación, las restricciones, los conjuntos de selección (nuevo) y las capas de animación ahora activan o desactivan sus ventanas correspondientes en función del estado de su icono. Su posición y tamaño también se guarda dentro de la disposición.

Puedes asignar el cambio de estas ventanas a atajos de teclado.

MetaHuman

MetaHuman Creator

MetaHuman Creator de Unreal Engine ya está disponible en Linux y macOS. Así, tendrás integrada en tu plataforma preferida la posibilidad de crear humanos digitales. Si no has migrado aún desde la aplicación web MetaHuman Creator, sigue nuestra guía de migración para obtener instrucciones sobre cómo transferir tu personaje MetaHuman existente a Unreal Engine y continuar creando.

Hemos mejorado el proceso de adaptación de la malla del cuerpo con compatibilidad para diversas poses e incluido la correspondencia de vértices en el espacio UV entre la plantilla de adaptación y las mallas del modelo, con lo que obtendrás resultados más precisos con menos esfuerzo. Los controles paramétricos del cuerpo ahora también son más intuitivos, lo que facilita mantener las proporciones humanas con mayor precisión y control. 

Con esta versión, puedes automatizar y procesar por lotes casi todas las operaciones de edición y montaje de los recursos de personajes MetaHuman mediante Python o Blueprint. Por primera vez, podrás realizar una integración completa de MetaHuman Creator en tus procesos de trabajo creativos con una API que admite escultura, adaptación, vestuario, rigging y texturas, agilizando de este modo el montaje completo de los personajes.  Previsualiza las ediciones en tiempo real en MetaHuman Creator y ejecútalas de forma interactiva en Unreal Editor o en una granja de servidores para procesarlas sin conexión.

Los MetaHuman en Unreal Engine

El complemento Groom de Unreal Engine ahora permite un control más preciso en el modelado y la animación de mechones de pelo gracias a un proceso de trabajo basado en articulaciones. Actualmente, es posible combinar simulaciones con movimientos dirigidos artísticamente, acceder al uso completo de los procesos de trabajo de animación de mallas esqueléticas y lograr una mayor libertad artística con conjuntos de selección y herramientas de pintura mejorados. El conjunto de herramientas ofrece una compatibilidad total con los peinados de MetaHuman creados originalmente en Houdini.

MetaHuman Animator

Ahora se puede acceder a la animación en tiempo real de las fuentes de Live Link de MetaHuman a través de una interfaz de Blueprint, con un grafo de ejemplo proporcionado en nuestra documentación.

Hemos renovado el proceso de trabajo para generar datos de calibración a partir de la toma del tablero, capturada con un par de cámaras estéreo, con el fin de ofrecer una selección automática de fotogramas superior, una visualización que facilite la selección manual de fotogramas y configuraciones repetibles en varias tomas.

Combinado con el nuevo complemento MetaHuman Animator Calibration Diagnostics (experimental) para validar la calibración con imágenes de rendimiento y determinar más fácilmente si se trata de la calibración más adecuada que se puede utilizar.

MetaHuman Capture

Hemos mejorado las opciones de animación en tiempo real en las aplicaciones de Live Link Face para iOS y Android ampliando la gama de cámaras compatibles.

Con Live Link Face, ahora puedes generar animaciones faciales en tiempo real utilizando una cámara externa en dispositivos Android o iPad compatibles (ten en cuenta que el sistema operativo iOS de Apple no admite cámaras externas en este momento).  Solo se pueden grabar vídeos desde una cámara externa en el iPad.

También puedes generar animaciones en tiempo real seleccionando cualquier cámara integrada en el dispositivo mediante Live Link Face en iOS y Android.  Solo se pueden grabar vídeos desde la cámara integrada en el dispositivo en iOS.

MetaHuman para Houdini

La última actualización de MetaHuman para Houdini incluye herramientas de renderizado capilar paramétrico, un proceso de trabajo guiado para crear peinados utilizando datos predefinidos. El conjunto de herramientas viene con un generador de folículos para controlar la densidad y la posición alrededor de la línea de nacimiento del pelo que genera guías basadas en parámetros de flujo, longitud y volumen, así como interpolación de mechones de cabello y peinado para detalles avanzados, como la formación de mechones.  Se trata de una forma rápida y accesible de bloquear e iterar nuevos peinados.  

Además, para aquellos que quieran aprender a crear peinados más complejos, hemos publicado el nuevo kit avanzado de renderizado capilar de MetaHuman para Houdini en Fab como recurso de aprendizaje adicional.

MetaHuman para Houdini ya está disponible para Linux.  

MetaHuman para Maya

La última actualización de MetaHuman para Maya ya está disponible en Linux e incorpora compatibilidad con Maya 2026.

Creación de mundos

HLOD personalizados

Cuando se utilizan los métodos de generación automática de HLOD proporcionados, es posible que el resultado no siempre cumpla con los requisitos del proyecto y esté vinculado a los componentes de la malla.

La compatibilidad con HLOD personalizados soluciona esta limitación al permitirte tus propias representaciones de HLOD personalizadas para actores individuales o grupos de actores.

Puedes utilizar la nueva clase de actor de HLOD personalizado de World Partition de dos formas:

• Inyectar representación personalizada directamente: puedes inyectar la representación personalizada tal cual en la partición en tiempo de ejecución de HLOD y, opcionalmente, utilizarla como entrada para capas de HLOD padre.

• Proporcionar solo una fuente personalizada: puedes utilizar la representación personalizada como entrada para el proceso de generación de HLOD sin añadirla al mundo en sí.

Experiencia de usuario de configuración de HLOD

Hemos rediseñado la configuración de los recursos de capas de HLOD de Configuración del mundo > World Partition para mejorar su facilidad de uso cuando se crea o edita una configuración.

Generación procedimental de contenido (PCG)

El marco de generación procedimental de contenido está listo para producción

El marco de generación procedimental de contenido (PCG) ya está listo para producción con el lanzamiento de UE 5.7.

Aunque el marco está en continúo desarrollo y sigue evolucionando, nuestro compromiso es mantener la compatibilidad con un entorno estable de forma que todas las producciones se puedan crear y depender de este conjunto de herramientas de generación procedimental de contenido rápido e iterativo, tanto para casos de uso en tiempo de ejecución como en el editor.

Modo de edición de generación procedimental de contenido

Ahora hay disponible un nuevo modo de herramienta de edición específico para la generación procedimental de contenido en Unreal Engine. Ofrece una biblioteca de herramientas personalizables que aprovechan el marco de generación procedimental de contenido, como dibujar splines, pintar o crear volúmenes, cada una con su propio grafo de generación procedimental de contenido y sus parámetros disponibles para la edición en tiempo real.

Puedes emplear los grafos de generación procedimental de contenido específicos de la herramienta tal cual o como ejemplos para crear y ampliar la biblioteca según tus propias necesidades.

Procedural Vegetation Editor

Procedural Vegetation Editor es un nuevo complemento experimental que permite crear y editar mallas de vegetación, compatible con el follaje de Nanite, directamente en Unreal Engine.

En esta versión inicial, los recursos de vegetación procedimental que crees se editarán mediante el editor de vegetación, un editor de grafos de nodos basado en la generación procedimental de contenido. Mediante el nodo importador proporcionado y los preajustes esqueléticos distribuidos en la carpeta de contenido del complemento, podrás:

• Modificar la forma de los árboles mediante operadores de gravedad, tallado y escala.

• Ajustar la distribución de las hojas y las ramas.

• Asignar distintos modelos de hoja.

• Exportar a mallas esqueléticas o mallas estáticas, incluida la compatibilidad con montajes de follaje de Nanite.

Crear distintas variantes mediante un solo grafo de nodos o varios grafos de nodos para construir una biblioteca de mallas de vegetación únicas para el proyecto.

Procesos de trabajo de recursos

Ahora puedes ejecutar grafos de generación procedimental de contenido como grafos independientes, lo que elimina la necesidad del contexto del mundo y de que el grafo se genere a partir de un componente de generación procedimental de contenido.

Este cambio añade compatibilidad con:

• Procesos de trabajo de creación de recursos, como la creación de mallas mediante operaciones geométricas, texturas con operaciones de la GPU o incluso la generación de recursos de datos de generación procedimental de contenido, como tablas de conjuntos de atributos, con tan solo ejecutar un grafo de generación procedimental de contenido independiente.

• Las herramientas y complementos de creación de recursos basados en el núcleo del marco de generación procedimental de contenido, como el nuevo Procedural Vegetation Editor, se beneficiarán de este completo conjunto de funciones y de futuras actualizaciones.

Para habilitar la ejecución independiente del grafo de generación procedimental de contenido, puedes habilitar la nueva opción Es un grafo independiente disponible en la configuración de cada grafo. Si esta opción está habilitada, tendrás acceso a una función del menú contextual: Generar grafos independientes, además de tener la posibilidad de generar, inspeccionar y depurar desde el editor de grafos mediante un objeto de depuración de grafos independientes.

Tipos de datos personalizados

Desde el lanzamiento inicial, fijamos el código de la lista de tipos de datos compatibles en el marco de generación procedimental de contenido estaba codificada, lo que impedía añadir y admitir fácilmente nuevos tipos de datos al ampliar el marco o crear interacciones con complementos externos.

En UE 5.7, ahora puedes añadir compatibilidad con cualquier tipo de datos personalizados dentro de la jerarquía de tipos y ampliar el marco, o utilizar el núcleo del marco y el conjunto de funciones para crear tu propia tu herramienta.

Además, hemos actualizado el selector de tipos para indicar mejor las relaciones entre tipos y permitir la selección múltiple.

Tipos de datos y operadores Polygon2D

Hemos añadido un nuevo tipo de datos Polygon2D a la lista de tipos de datos compatibles con el marco de generación procedimental de contenido.

Los datos Polygon2D son útiles para representar áreas como formas cerradas que pueden convertirse en datos de superficies o splines, para muestreo u operaciones específicas.

Hemos añadido un conjunto de nuevos operadores para admitir este tipo de datos:

• Crear polígono 2D: toma como entrada datos de puntos o de splines y los convierte en un polígono 2D.

• Operaciones de polígono: permite operaciones entre polígonos, como intersección, unión y diferencias. Además, el polígono 2D se puede cortar con trayectorias, mediante splines, para subdividir o aislar formas. para Por ejemplo, recortar una zona más grande con datos de spline en un patrón de cuadrícula para crear bloques urbanos individuales en un grafo generador de ciudades.

• Recortar trayectorias: permite la intersección o la diferenciación de splines con formas poligonales 2D.

• Desfasar polígono: aplica un desfase al polígono 2D para hacerlo más grande o más pequeño, con una gestión adecuada de los solapamientos.

• Crear superficie a partir de polígono 2D: convertirá el polígono 2D en una superficie que se puede muestrear mediante el nodo Surface Sampler para crear puntos sobre esta zona.

FastGeo Interop de la GPU

La generación procedimental de contenido mediante GPU ahora aprovecha los componentes FastGeometry para mejorar aún más el rendimiento del subproceso de juego al usar el marco para generar y crear una gran densidad de mallas estáticas, como dispersiones en el suelo o hierba. Elimina la necesidad de tener actores de partición y crea componentes locales de generación procedimental de contenido sobre la marcha.

Si quieres beneficiarte de esta mejora, habilita el complemento PCG FastGeo Interop en el proyecto y establece la CVAR pcg.RuntimeGeneration.ISM.ComponentlessPrimitives en 1.

Operadores y mejoras de la GPU

Hay nuevas incorporaciones al conjunto de funciones de cálculo de la GPU del marco de generación procedimental de contenido:

• Scene Capture: un nuevo nodo para realizar capturas de escenas desde el origen del componente para obtener y muestrear el color o la profundidad de la escena para la dispersión.

• Save Texture to Asset: un nuevo nodo para hacer bake de un PCGTextureData en un recurso UTexture2D.

• Compatibilidad con anulaciones: ahora los nodos de la GPU son compatibles con anulaciones de parámetros, incluido el recuento de elementos numéricos para nodos HLSL personalizados.

Operadores nativos existentes actualizados con soporte para el cálculo en la GPU:

• Cribar puntos fuera de los límites del actor

• Transformar puntos

Mejoras en la experiencia de usuario

Como parte de las continuas mejoras en la experiencia de usuario al trabajar con generación procedimental de contenido, estos son los últimos cambios:

• Color y validación de tipos de parámetros y anulaciones: los parámetros, pines de anulación, pines de salida constantes y sus conexiones ahora se colorean según su tipo, siguiendo el lenguaje visual de colores de los tipos de blueprints. Cuando una entrada puede ser de cualquier tipo o no se ha definido, el pin y el borde utilizan el blanco como color de visualización.

• Valores mínimos, máximos y unidades de los parámetros: ahora puedes configurar los parámetros de grafos con valores mínimos y máximos, así como las unidades que se mostrarán.

• Controles de visores de datos: hemos añadido controles y opciones adicionales en el editor de grafos para ayudar a previsualizar datos en contextos específicos.

Nodos y operadores

Unreal Engine 5.7 incorpora distintos elementos de generación procedimental de contenido nativos y nuevas opciones que incluyen:

• Intersección de splines: encuentra splines que se cruzan en 3D y añade puntos de control en la intersección o devuelve los puntos de intersección.

• Dividir splines: divide los splines en múltiples splines en función de predicados alfa, distancia, clave o puntos de control.

• Obtener segmento: devuelve un índice de segmento, un punto o un spline a partir de un punto, un spline o un polígono 2D.

• Anulaciones al generar componentes de malla de spline: ahora se respeta la clase de componente al generar la malla de spline, y hay compatibilidad con anulaciones de propiedades del componente en el nodo Spawn Spline Mesh.

• Nuevas clases de elementos de generación procedimental de contenido de Blueprint: hemos añadido nuevas clases de elementos de generación procedimental de contenido, incluidas funciones anulables basadas en intervalos para la compatibilidad con los cambios en el formato de estructura de matriz introducidos en los nodos nativos en la versión 5.6. Utilizar los nuevos elementos evita la transformación adicional de datos y mejora el rendimiento cuando se trabaja con elementos de generación procedimental de contenido de Blueprint.

• Get Execution Context: actualizado con compatibilidad para los contextos Is Listen Server, Has Authority e Is Builder.

• Extraer atributo: recupera un atributo específico en el índice indicado y lo genera como un nuevo conjunto de atributos.

• Export Selected Attributes: exporta datos en formato binario o JSON para casos de uso externos, como aplicaciones de aprendizaje automático.

• Reasignación de atributos: ahora se puede controlar mediante una curva.

• Operadores bit a bit: hemos añadido los operadores de desplazamiento a la izquierda y a la derecha.

• Operadores booleanos: hemos NAND, NOR, XNOR, IMPLY, NIMPLY, además de la conversión automática a booleano desde operaciones bit a bit.

• Operadores matemáticos: hemos añadido la nueva operación Añadir módulo, que es útil para desfasar y reordenar con índices.

• Límites de la malla y puntos de la malla: hemos añadido compatibilidad con mallas esqueléticas.

Complemento de interoperabilidad de Python

Hemos añadido un nuevo complemento de generación procedimental de contenido, que proporciona un nuevo nodo Execute Python Script para que puedas ejecutar secuencias de comandos de Python mientras se ejecutan los grafos. Puedes proporcionar la secuencia de comandos de Python directamente como entrada o ejecutarla desde un archivo en el disco; puedes definir la ruta al archivo dinámicamente mediante un atributo o parámetro que anule una ruta de objeto flexible.

Iteración del desarrollador

Cooking incremental (beta)

El cooking incremental ya se encuentra en fase beta en UE 5.7

y permite iterar más rápido en los dispositivos de destino, reduciendo así el tiempo total de cooking. Los procesos de cooking analizan automáticamente los cambios en los recursos respecto a los resultados almacenados en ZenServer y solo hacen cook de las nuevas actualizaciones realizadas en los recursos de tu proyecto. Esto funciona en todos los recursos nativos del motor, entre los que se incluyen los blueprints y las teselas de World Partition.

Compatibilidad con MSVC 14.44 para herramientas de C++

En Unreal Engine 5.7, hemos actualizado el compilador predeterminado de Visual C++ de Microsoft a MSVC 14.44.

Seguimiento y visualización del estado de la compilación (experimental)

Como parte de las herramientas de análisis de Horde, hemos introducido una nueva función experimental Panel de control del estado de compilación que permite a los equipos supervisar e inspeccionar qué pasos de BuildGraph en las listas de cambios de los proyectos se completan según lo previsto o informan de errores.

Esto forma parte de un desarrollo continuo para proporcionar una funcionalidad integrada en Horde que ayude a los equipos a comprender mejor las causas más comunes de los errores de compilación, hacer un seguimiento de la presión sobre los grupos de agentes y otras métricas útiles del rendimiento de la compilación que afectan a los tiempos de iteración.

Audio

Audio Insights (beta)

Audio Insights es nuestra principal herramienta para la creación de perfiles y la depuración de audio. Está dirigida a todos aquellos que utilizan audio en Unreal Engine. En esta versión, además de la estabilización de la API y la arquitectura, lanzamos una versión beta de Audio Insights. Incluye las siguientes funciones principales adicionales:

Monitorización

• Inicia una sesión de monitorización en tiempo real sin escribir datos en el disco.

• Los diseñadores de sonido pueden observar el funcionamiento de un proyecto, tanto en sesiones independientes como en sesiones de edición, durante periodos de tiempo más largos sin preocuparse por disponer de suficiente espacio en disco.

Compatibilidad con editores

• Utiliza Audio Insights para casos de uso en el editor, además de PIE.

• Audio Insights ahora reacciona a cualquier interacción de audio en el editor.

Instantáneas y grabación de colas

• Escribe los datos de la última sesión en tiempo real en el disco a la carta, hasta un máximo de 32 MB.

• Audio Insights puede detectar si se ha iniciado una sesión en tiempo real para conectarse a ella.

Medición de la intensidad en tiempo real (diseño de experiencia de usuario)

• Proporciona medición de audio independiente, específicamente para el cumplimiento de los requisitos de intensidad.

Historial de eventos desplazable

• Visualiza una lista cronológica de eventos de audio, como el inicio y el final del sonido, con marcas de tiempo.

• Al seleccionar un evento específico, el gráfico y otras visualizaciones se desplazan a la misma marca de tiempo en los datos.

Configuración de nodos MetaSound

La configuración de nodos de MetaSound aporta un nuevo nivel de expresividad a los MetaSounds al permitir que un nodo modifique sus entradas y salidas. La configuración de nodos aprovecha el panel Detalles del editor de MetaSound para proporcionar una vía para modificar las interfaces de los nodos y serializar los datos asociados que se pueden utilizar cuando un nodo reproduce audio.

Además de ofrecer a los diseñadores de sonido y desarrolladores una forma de crear nodos más matizados e interactivos, la configuración de nodos proporciona una experiencia de usuario mejorada. Por ejemplo, limpiando la paleta de nodos y reduciendo el número de pasos y la complejidad del recableado para muchas tareas comunes de diseño de MetaSound.

Complemento de subtítulos de audio

Los subtítulos de audio son necesarios para la accesibilidad: sistemas de diálogo, subtítulos opcionales y chat de voz. En Unreal Engine 5.7, seguimos mejorando el complemento Subtitle con las siguientes incorporaciones:

• Ahora, los subtítulos pueden ser controlados por otros tipos de SoundBase, además del SoundWave original y la compatibilidad con sincronización independiente en la versión 5.6.  De este modo, los subtítulos ya pueden basar su tiempo con respecto a las señales de sonido o al nivel superior de un MetaSound.

• Por defecto, los subtítulos adjuntos a los datos de usuario del recurso USoundWave se reproducen y detienen automáticamente utilizando el tiempo en que el audio comienza y se detiene.  No obstante, existe un caso de uso para la propiedad de duración de los subtítulos. Hemos añadido un enum para proporcionar un método que permita a los usuarios elegir la duración que desean utilizar.

• Ahora se admiten múltiples subtítulos en el recurso de datos de usuario.  En vez de usar múltiples recursos para varios subtítulos asociados a un efecto de sonido determinado, ahora tienes todos los subtítulos en un solo recurso.

• Ahora puedes habilitar o deshabilitar los subtítulos de forma global mediante UEngine::bSubtitlesEnabled.

Editor de formas de onda de audio

A menudo, los diseñadores de sonido necesitan pasar continuamente de UE a una herramienta externa cuando trabajan con recursos de audio. Para facilitar su proceso de trabajo en Unreal Engine 5.7, hemos añadido la visualización de marcadores y regiones de bucle de los archivos de sonido importados al editor de formas de onda de audio.

Esto incluye mejoras adicionales en la calidad de vida para ampliar el editor de ondas con suficientes características para que los diseñadores de sonido puedan realizar las tareas habituales de edición de audio sin tener que salir de UE.

Formatos y Channel Agnostic Types (CAT)

A menudo, los diseñadores de sonido necesitan enviar y recibir datos de audio multicanal entre nodos de MetaSound específicos de distintos formatos y números de canales. En UE 5.7, los programadores de audio pueden codificar nodos personalizados que contengan referencias de entrada y salida utilizando Channel Agnostic Types (CAT):

• El nuevo tipo de datos de velocidad de audio permite que los búferes de audio admitan varios canales en un solo tipo de pin.

• Los nodos pueden ahora admitir múltiples configuraciones para los formatos de los canales de audio.

• Reduce el desorden y la complejidad en los grafos de MetaSound.

Muestra de herramientas de Tech Audio

La experiencia y el uso que Tech Audio hace de la utilidad del editor pueden resultar extremadamente beneficiosos para la comunidad de audio en los videojuegos. Esta iniciativa tiene como objetivo ayudar a los nuevos desarrolladores a incorporarse a UE Audio, facilitar el trabajo a gran escala y servir como punto de partida para que los desarrolladores puedan crear sus propias herramientas específicas para cada proyecto.

• Un conjunto de utilidades, herramientas y grafos de secuencias de comandos visuales de blueprints que te ayudan a trabajar con la tecnología Unreal Audio.

• Tech Audio busca crear una colección ejemplar de utilidades y procesos de trabajo de edición para su uso interno y presentación externa.

Plataforma

Compatibilidad con la plataforma Android

Hemos mejorado los procesos de trabajo para los desarrolladores que crean, empaquetan e implementan proyectos de Unreal Engine en dispositivos Android.

• Implementación en Android 15 con compatibilidad con páginas de 16 kB.

• Omisión de los ajustes manuales de configuración del kit de desarrollo de software en macOS.

• El ajuste bDontBundleLibrariesInAPK ahora está habilitado por defecto, lo que garantiza que las bibliotecas se mantengan externas para mejorar el tamaño del paquete y la flexibilidad de implementación.

Renderizador para móviles

Unreal Engine 5.7 incorpora mejoras y nuevas funciones al renderizador para móviles.

Ahora puedes utilizar el modo de renderizado diferido multipaso, que habilita las sombras de contacto y las sombras insertadas.

Además, SSAO, SSR y DFAO son ahora opciones de escalabilidad, que puedes activar o desactivar en tiempo de ejecución, sin necesidad de configurarlas como opciones del proyecto ni volver a empaquetarlas.

Capa estéreo

Los componentes de la capa estéreo ahora son visibles cuando el eje X apunta hacia la cámara. Para habilitar el comportamiento antiguo (visible cuando X apunta en dirección opuesta a la cámara), utiliza la variable de consola: XR``.StereoLayers.UseLegacyFacing true.

Las capas estéreo emuladas ahora admiten profundidad y son compatibles con OpenXR en cuanto a su renderizado. Puedes desactivar el nuevo renderizado con la variable de consola: XR``.StereoLayers.RenderEmulatedLayerDepth false.

Application SpaceWarp de OpenXR

Application SpaceWarp es la tecnología de optimización impulsada por desarrolladores de Meta que permite liberar potencia de cálculo adicional para contenidos adecuados. En UE 5.7, no solo hemos implementado compatibilidad con la extensión XR_FB_space_warp de Meta, sino también con los entornos de ejecución de OpenXR que admiten  XR_EXT_frame_synthesis. . Esta tecnología obliga a la aplicación a renderizar a la mitad de la tasa de fotogramas y sintetizar cada dos fotogramas con una orientación actualizada de la cabeza, lo que reduce considerablemente la carga sobre la GPU.

La síntesis de fotogramas (y SpaceWarp) se controla con xr.OpenXRFrameSynthesis. Puedes habilitarla en tiempo de ejecución, pero requiere r.Velocity.DirectlyRenderOpenXRMotionVectors=1.

Presencia del usuario de OpenXR

Ahora podemos devolver eventos cuando se coloca o se quita un visor montado en la cabeza para entornos de ejecución de OpenXR que admiten la extensión XR_EXT_user_presence. Aunque anteriormente esto se exponía a través de VRNotificationsComponent, el nuevo método es más preciso y se comporta de la misma manera entre los distintos entornos de ejecución.

Diseño de grafismos (motion design)

Diseño de grafismos en movimiento listo para producción

A medida que los clientes comiencen a implementar el diseño de grafismos en movimiento en sus procesos de trabajo principales, el equipo de diseño de grafismos en movimiento seguirá recabando las opiniones de los clientes y se centrará en nuevas oportunidades de optimización del rendimiento del conjunto de herramientas.

Para que el diseño de grafismos en movimiento estuviera listo para producción, fue necesario lo siguiente:

• Reforzar el soporte de empaquetado.

• Reestructurar Text3D para que fuera compatible con texto enriquecido y la función de enmascaramiento.

• Estabilidad de la lógica de transición y mayor facilidad de uso y configuración.

• Mejorar la funcionalidad del control remoto mediante la incorporación de herramientas de organización de la interfaz y la refactorización de la experiencia de usuario general para agilizar el tiempo de configuración.

• Actualizar el estado de la escena según los comentarios de los clientes.

• Crear comunicación entre el estado de la escena y la lógica de transición.

• Garantizar la fiabilidad de Material Designer.

Texto enriquecido de Text3D

Dale a tus diseños de texto un toque dinámico con texto preconfigurado o personalizable dinámicamente. Crea un conjunto de estilos Text3D utilizando nuestro nuevo recurso específico, con el que podrás crear una configuración uniforme y emplearla en todo tu proyecto en cualquier actor Text3D.

Hasta ahora, este tipo de diseño requería varios actores Text3D y un modificador de seguimiento automático. En Unreal 5.7, estos se pueden editar en línea, lo que reduce así la cantidad de actores e incluso te permite controlar de forma remota las secciones de texto individuales.

• Admite la asignación de fuentes, colores y tamaños.

• Las herramientas de diseño flexibles se adaptan a cualquier dirección artística.

• Ideal para diseños con IU dinámica.

• Permite controlar cada sección de la línea de texto de forma remota para una mayor personalización.

  • Esto resulta útil cuando se quiere dividir algo como «Texto enriquecido nuevo» en tres controladores separados, manteniendo el estilo de cada palabra.

Calidad en la lógica de transición

La lógica de transición es fundamental para el proceso de trabajo de la transmisión y, basándonos en los comentarios de los clientes, hemos reevaluado los pasos necesarios para crear un nivel y configurar la lógica de transición. Ahora puedes realizar todos los pasos de la imagen anterior creando un nuevo nivel y asegurándote de que la opción Crear escena predeterminada de lógica de transición esté habilitada, como se ve en la esquina superior izquierda de la imagen.

A continuación se indican los pasos de configuración que la lógica de transición automatiza cuando se habilita la opción Crear escena predeterminada de lógica de transición:

• Crea secuencias de entrada y salida previamente etiquetadas.

• Crea secuencias de cambio de capa previamente etiquetadas.

  • Puedes añadir secuencias de cambio de capa adicionales (y preasignadas) mediante nuevas entradas en el panel de opciones de Sequencer.

• Configura previamente los ajustes de secuencia en esas secuencias para una compatibilidad inmediata.

• Crea una capa predeterminada para poder empezar a trabajar inmediatamente y probar tu diseño.

• Añade el modificador de subcapa de lógica de transición a un actor nulo en el esquematizador de diseño de grafismos en movimiento y asígnalo previamente a las secuencias de entrada y salida generadas.

Lo único que tienes que hacer además de eso es animar tu contenido mediante las secuencias generadas de entrada, salida y cambio.

Experiencia de usuario del control remoto

Hemos o mejorado varias funciones que permiten ahorrar tiempo a la hora de montar tus diseños.

Nuevos controladores

• Categoría

  • Añade categorías para agrupar tus controladores.

  • Selecciona uno o varios controladores y arrástralos a las categorías.

• Lista de cadenas

  • Elabora una lista desplegable con nombres que puedas vincular a tus comportamientos condicionales para mejorar la experiencia del usuario final.

  • Anteriormente, para ello era necesario introducir números enteros donde «1 = azul, 2 = rojo, 3 = amarillo», pero ahora se pueden nombrar las entradas del desplegable como «Rojo», «Azul» y «Amarillo».

• Events

  • Crea un botón que pueda reproducir secuencias de diseño de grafismos en movimiento, activar una propiedad «Al modificar» o activar un evento de transmisión.

Comportamiento de ruta

• Anteriormente, cada entrada de comportamiento de ruta solo podía dirigirse a un único actor. Ahora aparece una lista en el panel Acciones donde puedes añadir tantos actores como quieras para aplicar el efecto, lo que reduce la necesidad de utilizar múltiples comportamientos de ruta y facilita la resolución de problemas en tu configuración.

• Antes no era posible reordenar la lista de rutas; ahora, puedes utilizar el controlador de arrastre de la izquierda para reordenarla según lo necesites.

• La vista previa de la ruta ahora te indica si la ruta a la que te estás dirigiendo es válida o no con una marca de verificación verde.

Mejora de la IU

• Hemos añadido un icono de vínculo al panel de propiedades de la izquierda para mostrar si una propiedad expuesta está asignada a un controlador.

Estado de la escena

El estado de la escena en UE 5.7 incorpora varias funciones nuevas y mejoras en la experiencia de usuario que optimizan considerablemente el control del usuario.

• Organización de autómatas finitos

  • Reordena los autómatas finitos mediante la función de arrastrar y soltar.

  • Añade categorías.

• Hemos tareas de configuración como parte de las referencias de propiedades.

  • Los tipos de datos incluyen: booleano, float, entero, cadena y texto.

    • Cada tipo de datos tiene una funcionalidad única.

• Funciones de propiedad

  • Concatenar cadena

  • Texto a cadena

  • Nombre a cadena

  • Entero a cadena

  • Float a cadena

• Genera actores y genera actores para tickers.

Vínculo de datos

Hemos implementado dos actualizaciones muy solicitadas en el vínculo de datos :

• Funcionalidad de notificación automática, que proporciona un método de detección constante de valores cambiantes de las fuentes para activar actualizaciones.

• Interacción con el estado de la escena para proporcionar un método para desplazar tickers y otros elementos dinámicos.

Canalización de renderizado de producción

Modificador de colección de parámetros de material

Las colecciones de parámetros de material son recursos muy útiles que pueden controlar varias propiedades de múltiples materiales a la vez. A menudo, los aspectos y efectos creativos dentro de una escena se controlan de forma dinámica mediante conjuntos de parámetros de material.

El modificador de colección de parámetros de material permite establecer y anular valores de parámetros por capa de renderizado en el grafo de Movie Render. A partir de un mismo nivel y secuencia de nivel, es posible renderizar tomas con diferentes valores de parámetros en cada capa de renderizado. También puedes convertir los parámetros en variables de grafo y exponerlos como anulaciones tanto en la ventana Renderizado rápido como en la ventana Movie Render Queue.

Tipo de grabación por salida

La capacidad de renderizar varios tipos de salida en el mismo trabajo significa que el grafo de Movie Render puede ofrecer simultáneamente medios finales y de revisión. Por lo general, la grabación es conveniente para algunos tipos de salida de un trabajo, pero no para todos. Para tener esto en cuenta, el grafo de Movie Render ahora establece Tipo de grabación por salida en vez de utilizar un nodo independiente en una rama. De este modo, resulta mucho más sencillo, por ejemplo, obtener renderizados EXR limpios, pero incluyendo la función de grabación en MP4.

Control de nomenclatura de archivos

Las convenciones de nomenclatura sólidas en la salida de renderizado constituyen un elemento fundamental para la eficiencia de los procesos en todas las industrias. Teniendo esto en cuenta, el grafo de Movie Render incluye un control de nomenclatura de archivos mucho más robusto para adaptarse mejor a los requisitos específicos de nomenclatura de los estudios de forma nativa, sin necesidad de secuencias de comandos adicionales en el proceso. Entre las principales mejoras se incluyen:

• Los tokens de nomenclatura personalizados definidos en las herramientas de montaje cinemático son compatibles con todos los campos de nombre.

• Puedes personalizar {renderer_name} (por ejemplo, «Diferido») y {renderer_sub_name} (por ejemplo, «Estético»), y los conflictos se resuelven por rama en vez de para todo el grafo, lo que ofrece más flexibilidad.

• La grabación ya no aplica {renderer_name} en el renderizado estético cuando no está compuesto.

• Las pasadas de material de posprocesamiento pueden utilizar una convención de nomenclatura diferente a la del renderizado estético, si se desea.

Metadatos de EXR por capa de renderizado

Los metadatos de EXR ahora siguen una convención que separa de forma fiable los pares clave-valor por capa de renderizado y evita conflictos de nombres. Según esta convención, los metadatos de los renderizados de Unreal Engine se pueden consultar directamente en aplicaciones de posproducción como Nuke sin necesidad de herramientas de proceso adicionales.

Canalización de contenidos

Personalización de la importación de recursos en USD con Interchange (experimental)

USD es un formato de archivo de descripción de escenas muy versátil cuya adopción está creciendo en la industria 3D.

Hemos añadido USD a la lista de formatos de archivo compatibles con el marco de Interchange en UE 5.5. Los creadores de contenido se benefician de un mayor control sobre el proceso de importación y ahora pueden añadir pasos de procesamiento personalizados para la importación de recursos de archivos USD, de forma similar a las capacidades de Interchange ya disponibles con otros formatos, como FBX.

El soporte para USD a través de Interchange se considera experimental y está limitado a la importación de recursos. En UE 5.7 hemos añadido compatibilidad con:

• Aspecto

• Luces de cúpula (no el esquema de DomeLight_1)

• Audio (UsdMediaSpatialAudio)

• Instancia de puntos

Importación de niveles FBX con intercambio

Con el fin de armonizar la interfaz de usuario y la experiencia de usuario para importar diferentes formatos de archivo al motor, el proceso de importación de niveles FBX está disponible a través del marco de Interchange. Ahora esta es la ruta por defecto para importar un FBX a un nivel. Aún puedes recurrir al comportamiento heredado con la ayuda de una CVAR.

El principal cambio proviene del uso del mismo cuadro de diálogo de importación que para la importación en la carpeta de contenido. Las funcionalidades heredadas, como eliminar recursos o actores de la importación, o utilizar diferentes conjuntos de opciones para importar, ahora se pueden realizar a través de procesos personalizados de Interchange.

Editor y sistemas de interfaz de usuario

Asistente de IA (experimental)

El asistente de IA permite obtener respuestas de una forma más rápida sin tener que salir de Unreal Engine. Al deslizar un panel específico en el editor, puedes hacer preguntas, generar código o seguir instrucciones paso a paso, todo ello sin necesidad de cambiar a un navegador externo.

Ahorrarás tiempo y no interrumpirás el proceso. En vez de perder la concentración para hacer búsquedas en línea, podrás obtener ayuda, ejemplos y consejos para solucionar problemas al instante directamente en el editor.

Qué puedes hacer:

• Acceder a instrucciones paso a paso para las tareas.

• Obtener orientación y consejos directamente en su contexto.

• Solucionar problemas de desarrollo con ayuda de la IA.

• Generar ejemplos de código para acelerar el proceso de trabajo.

• Consultar conversaciones anteriores con el historial de chat.

• Copiar y pegar respuestas en el proyecto.

El asistente de IA funciona con la misma IA entrenada especialmente ya disponible en UEFN y en la comunidad de desarrolladores, diseñada para comprender Unreal Engine y ayudarte a avanzar más rápido.

Pantalla de inicio

La pantalla de inicio te ayuda a orientarte en Unreal Engine proporcionándote un punto de partida acogedor. Destaca recursos esenciales como tutoriales, documentación y foros.

Tendrás una experiencia de familiarización más sencilla y guiada. En vez de enfrentarte a un editor vacío, dispondrás de una forma clara de navegar a recursos de aprendizaje, noticias y asistencia, todo en solo lugar, lo que te ayudará a iniciar proyectos con seguridad y orientación.

Qué puedes hacer:

• Accede a las últimas noticias y actualizaciones.

• Navega directamente a los recursos de iniciación.

• Abre tutoriales y documentación.

• Visita los foros y las notas de la versión.

• Abre los enlaces externamente en Chrome.

• Desactiva la pantalla de inicio si prefieres no verla cada vez.

La pantalla de inicio sirve como centro de referencia único para la familiarización, lo que hace que Unreal Engine sea más accesible desde el primer inicio.

Interacciones con planos de recorte ortogonales

Los visores ortogonales ahora proporcionan un control más flexible y fiable. En versiones anteriores, los planos de recorte muchas veces no se podían utilizar, lo que complicaba ajustar lo que se veía en la escena.

Con las vistas ortogonales se consigue un control preciso sobre lo que se ve, lo que facilita centrarse exactamente en la geometría que se necesita.

Qué puedes hacer:

• Ajusta los planos de recorte cercanos y lejanos con mayor precisión.

• Utiliza nuevos controles visuales en el visor directamente.

• Personaliza la visibilidad en las vistas ortogonales para adaptarlas a tu proceso de trabajo.

Esta mejora, incluida en UE 5.7, hace que los procesos de trabajo ortogonales sean más prácticos y predecibles.

Mejora de los cuadros de diálogo de guardado y eliminación

Hemos mejorado los cuadros de diálogo Guardar y Eliminar en Unreal Engine para facilitar la gestión de recursos. Las acciones comunes ahora funcionan como se espera, lo que reduce los clics innecesarios y las interrupciones en el proceso de trabajo.

Se dedica menos tiempo en solicitudes repetitivas y más tiempo en el proyecto.

Qué puedes hacer:

• Utiliza la tecla intro en el mensaje emergente de eliminación de recurso (no disponible hasta ahora).

• Elimina diferentes recursos sin tener que hacer clic varias veces en Aceptar con el botón.

• Confía en interacciones más coherentes e intuitivas con los cuadros de diálogo.

Estas mejoras llegan con UE 5.7 y agilizan los procesos de trabajo diarios al solucionar problemas que llevaban mucho tiempo causando molestias.

Mejora de las interacciones de arrastre de las ventanas

Arrastrar ventanas en el editor ahora es más intuitivo y menos molesto. En versiones anteriores, al hacer clic y arrastrar cualquier barra de encabezado, se desacoplaba todo el editor de niveles de la pantalla completa, a menudo de forma accidental.

Evita clics accidentales frustrantes y mantén el espacio de trabajo estable para que puedas concentrarte en crear.

Qué puedes hacer:

• Arrastra ventanas y paneles sin desanclar todo el editor de niveles.

• Evita interrupciones accidentales en los procesos de trabajo a pantalla completa.

• Disfruta de interacciones con las ventanas más predecibles y sencillas.

Esta mejora, corregida en UE 5.7, resuelve una frustración habitual y hace que la gestión de ventanas sea más fiable.

Mejora de las interacciones duplicadas en el editor de blueprints

Duplicar elementos en el editor de blueprints ahora es más sencillo y menos molesto. En versiones anteriores, al duplicar, se borraba la selección, lo que obligaba a volver a seleccionar manualmente los elementos en la vista de árbol.

Ahora puedes mantener el ritmo mientras editas, sin tener que hacer clics adicionales ni volver a trabajar al duplicar elementos.

Qué puedes hacer:

• Duplica elementos en el editor de blueprints sin perder la selección.

• Mantén las selecciones activas mientras trabajas en la vista de árbol.

• Reduce los pasos repetitivos al duplicar varios elementos.

Esta mejora, incluida en UE 5.7, hace que la edición de blueprints sea más eficiente y menos frustrante.

Modos de visor de inspección de geometría

Los nuevos modos de visor de inspección de modelos en Unreal Engine disponen de opciones de visualización simplificadas y no fotorrealistas. Estos modos priorizan la claridad geométrica sobre el realismo, eliminando la iluminación y las sombras al inspeccionar modelos 3D mecánicos o complejos:

• Arcilla

• Cebra

• Cara frontal/posterior

• Color aleatorio

Etiquetas de recursos de usuario

El sistema de etiquetas de recursos de usuario permite añadir etiquetas arbitrarias a tus recursos. Es compatible con los favoritos locales y con etiquetas para todo el proyecto, y se puede ampliar para sugerir etiquetas adicionales. Estas etiquetas son el pilar de sistemas adicionales, como el explorador de recursos etiquetados que se utiliza en Niagara. Selecciona los recursos que quieras etiquetar y utiliza Ctrl + T o selecciona Administrar etiquetas en el menú contextual.

Explorador de recursos etiquetados (Niagara)

Una actualización del anterior cambio de diseño del explorador de recursos de Niagara. Ahora generalizado, sienta las bases para los generadores de recursos que quieran adoptar el mismo explorador. Puedes ampliarlo creando un nuevo recurso Configuración del explorador de recursos etiquetados, definiendo tus propias secciones y etiquetas enumeradas. De este modo, es posible que tus proyectos tengan sus propias secciones y etiquetas, o que se sustituya por completo el recurso de configuración principal en la configuración del proyecto dentro del editor Niagara.

Si quieres recibir ayuda para actualizar los emisores y sistemas de Niagara existentes y utilizar el nuevo recurso de configuración del explorador de recursos etiquetados, consulta Actualización de etiquetas de Niagara (Cómo actualizar las etiquetas de Niagara).

Marco

State Tree: depurador de rebobinado

Presentamos una nueva pista de depurador de rebobinado para State Tree que ofrece una experiencia de depuración mejorada, orientada al propietario y a la instancia, directamente en el depurador de rebobinado. Esta integración ofrece un contexto más detallado sobre cuándo y cómo se ejecuta la lógica del comportamiento, todo ello en consonancia con la jugabilidad y los cronogramas de animación.

La nueva pista incluye un panel Detalles específico con una vista en árbol compacta, lo que facilita la visualización y la navegación por configuraciones lógicas complejas, incluidos subárboles anidados y recursos vinculados. De este modo se mejora la facilidad de uso cuando se trabaja con State Trees más grandes o modulares.

Si bien esta integración supone un cambio hacia un proceso de trabajo de depuración más unificado, el depurador original de State Tree sigue estando disponible como opción. Puedes seguir utilizando la interfaz antigua si lo prefieres para algunos casos de uso.

Tiempo de ejecución de State Tree

Esta actualización incorpora una serie de mejoras en el tiempo de ejecución que mejoran la precisión y el rendimiento de la lógica basada en el State Tree.

• Vinculación de propiedades en tiempo real: ahora los nodos pueden enviar actualizaciones de valores a salidas vinculadas de forma dinámica durante la ejecución utilizando las propiedades de salida, lo que resuelve los problemas relacionados con datos obsoletos o estáticos en los procesos de trabajo de actualización.

• ExecutionRuntimeData: los nodos ahora pueden declarar datos opcionales y duraderos que persisten durante toda la vida de la instancia de State Tree, lo que resulta útil para mantener el estado de ejecución a lo largo de transiciones o actualizaciones sin depender de variables globales estáticas.

• Optimización de memoria para vinculaciones estáticas: los emisores de delegados, los agentes de escucha y las referencias de propiedades ahora se almacenan fuera de los datos de instancia, lo que reduce la sobrecarga de memoria por nodo.

Hemos implementado las siguientes funciones, pero no las hemos habilitado por defecto para evitar alterar los datos existentes y los comportamientos predeterminados. No obstante, puedes optar por utilizarlos si lo deseas.

• Comportamiento de reentrada en estado: hemos añadido compatibilidad para volver a entrar en el mismo estado y reiniciar tareas, lo que permite implementar la lógica de reinicio más fácilmente.

• Refactorización de datos de instancia: las condiciones y transiciones ahora utilizan datos instanciados con ámbito, lo que evita la pérdida de datos entre sesiones y permite patrones de uso tanto temporales como persistentes.

Depurador de Mass

Hemos incorporado un nuevo y potente sistema de búsqueda de entidades integrado directamente en el depurador de Mass, que ofrece a los desarrolladores una nueva IU para crear y ejecutar consultas de MassEntity, La interfaz refleja la API de consulta C++ de Mass 1:1, lo que permite un filtrado preciso de entidades mediante los mismos criterios y requisitos que las consultas de código fijo.

Ahora puedes crear, guardar, cargar y compartir consultas personalizadas, y ver los resultados de forma inmediata en la pestaña Entidades. lo que mejora la rapidez y la eficiencia con la que los desarrolladores inspeccionan y validan el estado de Mass en tiempo de ejecución.

Asimismo, hemos mejorado considerablemente el sistema de puntos de interrupción, lo que ofrece más control y visibilidad al depurar procesadores de Mass y escrituras de fragmentos.

Configuraciones múltiples de salto para enlaces de navegación generados automáticamente

Hemos ampliado la generación automática de enlaces de navegación para que admita configuraciones múltiples de salto por cada pasada de generación de malla de navegación. Anteriormente, solo se podía utilizar una única configuración de salto, lo que a menudo requería tolerancias excesivamente amplias para gestionar diversos tipos de enlaces (por ejemplo, saltos hacia arriba, hacia abajo y transversales). Esto también implicaba que todos los enlaces generados compartían la misma clase de área y clase de proxy de enlace, lo que limitaba la flexibilidad.

Gracias a esta actualización, ahora es posible definir múltiples configuraciones distintas, cada una de las cuales se procesa en su propia pasada de validación. De esta forma, el control es más específico y significativo. Por ejemplo, se pueden generar saltos hacia abajo y hacia arriba de forma independiente, cada uno con diferentes umbrales de distancia, tipos de área o comportamiento de proxy. Esto permite configuraciones de movimiento más matizadas, al tiempo que se reduce la generación excesiva o los solapamientos no deseados.

Para garantizar la compatibilidad con versiones anteriores, hemos migrado cualquier configuración de salto único existente como la primera entrada en la nueva configuración múltiple. Facilidad de uso de State Tree

Seguimos mejorando la experiencia del editor de State Tree con varias actualizaciones destinadas a mejorar la claridad y la facilidad de uso.

• Ahora puedes copiar y pegar tareas, condiciones y transiciones entre estados, incluso entre diferentes recursos de State Tree. Esto facilita en gran medida la reutilización de la lógica y el mantenimiento de un comportamiento uniforme en comportamientos de gran envergadura.

• Además, hemos añadido la posibilidad de copiar y pegar vinculaciones de propiedades individuales. Las propiedades vinculadas y no vinculadas se gestionan de forma inteligente:

  • Las propiedades vinculadas sustituyen sus vinculaciones si son compatibles.

  • Las propiedades no vinculadas conservan los valores si se pega un valor, o conservan la vinculación si se pega una vinculación compatible.

  • No se puede pegar un valor en una propiedad vinculada.

  • Si se pega un tipo incompatible o si no se puede acceder a los datos de origen, se producirá un error de validación.

• Puedes ocultar propiedades dentro de nodos y datos de instancia basados en el esquema, lo que reduce el ruido visual y mejora el enfoque.

Mass Runtime

Esta actualización incorpora una serie de optimizaciones de bajo nivel y mejoras en la arquitectura del marco de Mass, con el objetivo de mejorar el rendimiento general, la eficiencia de la memoria y la estabilidad del sistema en situaciones en tiempo real.

La novedad más destacada es la función de división del tiempo del procesador, que permite dividir los procesadores de larga duración en varios fotogramas. Esto contribuye a reducir los picos de rendimiento y permite una mejor distribución de las cargas de trabajo pesadas, lo que resulta especialmente útil en entornos a gran escala o con un uso intensivo de simulaciones.

Iris (beta)

Ahora que Iris ha pasado de la fase experimental a la beta, nos hemos centrado en consolidar las API clave y mejorar la facilidad de uso, el mantenimiento y el rendimiento en toda la pila de red. Esta versión incluye varios cambios de diseño internos y mejoras en la calidad para los desarrolladores que trabajan directamente con los sistemas de replicación de Iris.

• Anulaciones del generador de actores: ahora los actores pueden especificar implementaciones personalizadas de NetActorFactory utilizando StartReplicationParams, lo que proporciona más flexibilidad en el comportamiento de replicación en tiempo de ejecución. De este modo, se pueden realizar configuraciones de replicación avanzadas sin depender de anulaciones globales.

• Límites más claros de la API: hemos eliminado la clase base de Iris UReplicationBridge para reducir la sobrecarga de llamadas virtuales y simplificar la navegación por el código. La mayoría de los sistemas de Iris ya dependen directamente de UObjectReplicationBridge, por lo que este cambio optimiza el modelo de herencia y evita indirección innecesaria.

• Mejora en la nomenclatura del ciclo de vida de la replicación: hemos aclarado la API BeginReplication:

  • La función no virtual ahora es StartActorReplication, lo que indica claramente su propósito como punto de entrada para iniciar la replicación.

  • Hemos cambiado el nombre de la devolución de llamada virtual a OnBeginReplication, separando así el comportamiento del ciclo de vida de las llamadas al sistema.

• Mayor coherencia entre Iris y las redes heredadas: OnBeginReplication y EndReplication ahora se llaman de forma coherente independientemente de si Iris está habilitado, lo que garantiza la paridad de comportamiento y hace que la transición entre sistemas de red sea más fluida.

• Soporte para desplazamientos fluidos: Iris ahora es compatible con la función de desplazamientos fluidos de Unreal Engine, lo que garantiza que los actores y estados replicados se gestionen correctamente en las transiciones entre mundos. Este es un requisito fundamental para el envío de funciones del juego que dependen de datos persistentes de los jugadores o de transiciones entre grandes mundos de transmisión.

Multimedia

Media Viewer (beta)

A menudo, los animadores necesitan alinear sus animaciones con material de referencia existente. En la versión 5.6, hemos añadido la posibilidad de acoplar medios (imágenes, texturas multimedia, archivos de vídeo, visores en tiempo real) junto al lugar donde se realiza el trabajo de animación. Dos bancos AB en configuraciones horizontales o verticales ayudan a comparar dos conjuntos de recursos. Los controles de zoom y panorámica se pueden utilizar para alinear aún más el contenido. En UE 5.7, el complemento Media Viewer se encuentra ahora en fase beta e incluye las siguientes mejoras en el proceso de trabajo y la facilidad de uso:

• Controles mejorados, como los controles de rotación y zoom mediante Alt + botón derecho del ratón.

• Posibilidad de marcar y recuperar rápidamente configuraciones de recursos mediante atajos de teclado.

• El botón de bloqueo ahora también refleja los controles de reproducción y el cronograma en el modo de reproductor dual.

Simulación y efectos visuales

Chaos Destruction

El sistema Chaos Destruction es un conjunto de herramientas diseñadas para lograr niveles de destrucción con calidad cinematográfica en tiempo real. Además de sus impresionantes efectos visuales, el sistema está optimizado para ofrecer un gran rendimiento, lo que permite a los artistas y diseñadores tener un mayor control sobre la creación de contenidos y el proceso de fracturación mediante un proceso de trabajo intuitivo y no lineal.

Las actualizaciones de UE 5.7 incluyen:

• Restablecer estado: ahora puedes restablecer el estado del componente de colección geométrica utilizando C++, Blueprint o en tiempo real en el editor mientras realizas la simulación.

• Exportar a malla esquelética: ahora puedes exportar los recursos de la colección geométrica a un recurso de malla esquelética.

• Subtrazado de hoja: después de trazar en una colección geométrica, ahora puedes obtener el cono foliar exacto a partir de un trazado de línea. Cuando no se interrumpe, el trazado de la línea original contra el componente devuelve el hueso raíz. Con esta nueva función, ahora puedes obtener el hueso exacto al que llega el trazado, lo que permite acciones como colocar pegatinas en los huesos correctos o incluso anclar piezas individuales en tiempo de ejecución.

Editor de flujo de datos de Chaos

El grafo Dataflow permite la generación procedimental de recursos dentro de un entorno basado en nodos. La implementación del grafo utiliza una evaluación basada en extracción, en la que los nodos del grafo generan un estado de salida almacenado en caché basado en la evaluación de sus entradas. Los recursos de flujo de datos se utilizan para ayudar en la creación de procedimientos y la configuración de sistemas de simulación.

Chaos Cloth, Destruction, Flesh y Hair utilizan el conjunto de herramientas unificado basado en nodos de Dataflow.

Las actualizaciones de UE 5.7 incluyen:

• Nuevos controles de cronograma y simulación.

• Una nueva barra de herramientas.

• Una herramienta rediseñada para pintar los mapas de peso (para que coincida con el editor de mallas esqueléticas).

• Una nueva herramienta para editar los pesos de la piel (para que coincida con el editor de mallas esqueléticas).

• Una nueva herramienta para editar los huesos del esqueleto.

• Muchas mejoras en la calidad.

Chaos Visual Debugger

Chaos Visual Debugger (CVD) es una herramienta versátil diseñada para grabar y reproducir el estado de una simulación física durante el juego. Admite la grabación de todos los solucionadores Rigid y RBAN activos, incluidos los estados de las partículas y los datos de colisión. CVD es accesible como herramienta de edición en Unreal Engine y ofrece una gran cantidad de opciones de personalización, como la posibilidad de elegir canales de datos específicos para grabar, ya sea a través de la interfaz de usuario o mediante comandos de consola.

La herramienta también cuenta con capacidades de depuración en vivo, lo que te permite inspeccionar en tiempo real de los datos físicos durante la simulación. Asimismo, incluye una variedad de opciones de visualización, como el estado de las partículas, los datos de colisión y las consultas de escena, para ayudarte a analizar y solucionar problemas de simulaciones físicas de manera eficaz.

Las actualizaciones de UE 5.7 incluyen:

• Mejoras en el nombre de los objetos: en esta versión, hemos introducido una nueva función denominada metadatos de partículas.

  • Estos nuevos metadatos sustituyen la antigua cadena larga «Nombre de depuración».

  • CVD ahora muestra el nombre del actor propietario del nombre del cuerpo de física y lo desglosa en diferentes campos (nivel, componente e índice de hueso).

  • Además, hemos añadido un botón Buscar en el explorador de contenido que aprovecha estos nuevos metadatos y te permite encontrar el blueprint del que procede un cuerpo específico con un solo clic.

• Mejoras de rendimiento: en esta versión, hemos seguido trabajando para mejorar el rendimiento de CVD.

  • Los archivos de CVD con una gran cantidad de datos (concretamente, más de 2 GB de datos de geometría de colisión) ahora se cargan hasta un 30 % más rápido.

  • Se ha reducido de más de 10 segundos a aproximadamente 3 segundos el tiempo que podía tardar en cargarse el primer fotograma de escenas complejas (+93 000 objetos).

• Además, esta versión incluye correcciones de errores y mejoras de calidad.

Chaos Cloth

A medida que la simulación de tejidos y la ropa compleja se vuelven cada vez más solicitadas en el motor, nuestro editor de tejidos de malla esquelética y nuestro proceso de trabajo heredados no pueden adaptarse fácilmente a las futuras actualizaciones necesarias para satisfacer esas necesidades. La moda y la mayor parte del trabajo de creación de personajes se han centrado casi exclusivamente en el uso de DCC especializados en la construcción de ropa basada en paneles. Con el fin de crecer con estos DCC externos, seguimos desarrollando nuestro editor de telas para poder importar y editar configuraciones de paneles, al tiempo que perfeccionamos el proceso de trabajo de configuración de telas.

Chaos Cloth para Unreal Engine 5.7 incluye el desarrollo continuo de un editor de tejidos beta. 

Las actualizaciones de UE 5.7 incluyen:

• Integración de datos de ropa con malla esquelética:

  • Ahora puedes añadir recursos de tejido y traje como datos de ropa con malla esquelética.

  • Las secciones de renderizado de la malla esquelética pueden deformarse mediante la configuración de simulación de tejidos dentro del grafo de Dataflow de estos recursos, lo que elimina la necesidad de un componente de tejido adicional.

• Nuevas opciones de espacio de referencia:

  • Utiliza el nuevo nodo de Dataflow ReferenceBone para establecer explícitamente el hueso de referencia en vez de utilizar el que se calcula automáticamente.

  • Utiliza la nueva opción de espacio de amortiguación local para resolver en el espacio ReferenceBone en vez de utilizar el centro de masa.

• Optimizaciones: hemos implementado optimizaciones en el subproceso del juego de tejidos y el tic interactivo.

• Mallas accesorias (experimental):

  • Hemos añadido mallas accesorias adicionales y actualizado la restricción de protección para poder utilizar esta malla accesoria.

  • Actualmente, puedes crear mallas accesorias convirtiendo una colección de mallas de simulación existente en una malla accesoria. Si existen ID de vértices importados tanto en la colección de origen como en la de destino, puedes utilizarlos para hacer coincidir los índices de vértices que se reordenaron como parte de una importación de una malla esquelética.

Tecnología central de Chaos

La física de Chaos se somete continuamente a actualizaciones y optimizaciones con el fin de proporcionar a artistas, desarrolladores y programadores mejores resultados de simulación. La dinámica de cuerpos rígidos es la tecnología básica en la que se basa la mayoría de la física de los juegos. A medida que avanzamos hacia mundos cada vez más grandes y basados en la física, tenemos que asegurarnos de que este sistema central se adapte y pueda gestionar dichos casos de uso. Las consultas son una tecnología fundamental en la que se basan una amplia gama de sistemas dentro de Unreal Engine y, al igual que la dinámica de cuerpos rígidos, debemos asegurarnos de que el rendimiento de las consultas se adapte a mundos dinámicos muy grandes.

Las actualizaciones de UE 5.7 incluyen:

• Mejoras del rendimiento de la simulación:

  • Más etapas de simulación paralelas.

  • Hemos añadido la función experimental de suspensión parcial para mejorar el rendimiento de grandes pilas no estructuradas.

• Mejoras en el rendimiento de las consultas:

  • Mejoras en el escalonamiento de la esfera y la cápsula.

  • Mejoras en la capa de consulta general, la transformación y la gestión de escalas.

• Chaos Visual Debugger (CVD):

  • Mejora de la velocidad de carga para escenas con una gran cantidad de actores y geometría compleja.

  • Cambios en la calidad y mejoras en la coherencia del depurador en tiempo de ejecución.

• Recursos de física de Dataflow:

  • compatibilidad inicial con la creación de recursos de física mediante grafos de Dataflow.

• Numerosos cambios y correcciones de la calidad en el conjunto de funciones de simulación.

Almacenamiento en caché de Chaos

En Unreal Engine, la caché de Chaos es un sistema dentro del marco Chaos Destruction que registra y reutiliza simulaciones de destrucción complejas, lo que mejora significativamente el rendimiento y permite obtener resultados uniformes y predecibles para funciones como los cortometrajes. La gestión del almacenamiento en caché se realiza mediante el administrador de caché de Chaos, que registra los datos de física en un recurso denominado Colección de caché de Chaos.

Estos datos almacenados en caché se pueden reproducir en tiempo de ejecución para mostrar la destrucción sin necesidad de volver a calcular toda la simulación, lo que hace que las escenas complejas sean más eficientes y menos exigentes para el hardware.

Las actualizaciones de UE 5.7 incluyen:

• Compatibilidad con mallas de proxy raíz de la colección geométrica: la caché de Chaos ahora es compatible con las mallas de proxy raíz y cambiará para utilizarlas en función del estado de destrucción del recurso de la colección geométrica que se almacena en caché y se reproduce.

• Incremento automático de recursos de caché: el administrador de caché de Chaos ahora cuenta con una opción para crear automáticamente un nuevo recurso cada vez que se inicia una nueva sesión de grabación.

• Controles de inicio/fin de sesión: ahora puedes controlar cuándo se inicia y finaliza la sesión de almacenamiento en caché. Por defecto, la sesión de caché comienza cuando se activa el evento Begin Play para el actor de caché (normalmente al iniciar PIE o Simulación). Existe una opción para deshabilitar este comportamiento, que requiere que se inicie la sesión mediante las funciones de inicio y detención de Blueprint.

• Funciones de componentes observados: ahora hay funciones de Blueprint disponibles para añadir, actualizar, eliminar o borrar componentes observados de un ChaosActorManager específico.

• Correcciones de errores importantes:

  • Ahora, al grabar dos veces una colección geométrica almacenada en caché durante la misma sesión, los eventos siempre se graban correctamente la segunda vez.

  • Ahora, al reproducir una caché en el modo de reproducción, la interfaz de datos de Niagara para Chaos Destruction siempre activa los eventos finales durante la reproducción, tal y como estaba previsto.

Chaos Hair

La iniciativa de Pelo y renderizado capilar se centra en crear un sólido proceso de simulación para lograr un comportamiento realista del cabello utilizando Dataflow, mallas esqueléticas y splines guía. El sistema permite simulaciones basadas en animaciones, la combinación de mechones cinemáticos y simulados, y ofrece funciones de creación avanzadas, como deformadores de guía y herramientas de pintura.

Los procesos de trabajo procedimentales del recurso de renderizado capilar se benefician de la actualización UE 5.7 para la mejora general del editor de Dataflow. Hemos mejorado los nodos correspondientes para proporcionar una configuración más flexible:

• Nodos sensibles a la selección:

  • La mayoría de los nodos admiten una selección, lo que permite una configuración más controlada y específica.

  • Puedes utilizar los nodos de selección existentes para otros recursos (Destruction, Flesh) para crear conjuntos de selección y manipularlos de forma procedimental.

• Rendimiento:

  • Los recursos de renderizado capilar con geometría compleja generan más rápidamente la geometría para el visor de construcción y ahora almacenan la información en caché para evitar tener que volver a calcularla.

  • Esto se aplica a otros nodos basados en colecciones en los editores de Dataflow.

Las actualizaciones de UE 5.7 incluyen:

• Simula el cabello con splines guía controlados por animación y física.

• Combina estados animados y simulados para lograr realismo y control.

• Compatibilidad con atributos de pintura, pesos de la piel e intercambio de guías.

Fluids de Chaos

El proyecto Fluids sigue ampliando las capacidades de simulación de agua de Unreal Engine, con esfuerzos específicos en UE 5.7 orientados al complemento Advanced Water, con mejoras principalmente para simulaciones de ríos a los que se ha hecho bake.

Las actualizaciones de UE 5.7 incluyen: 

• Compatibilidad con texturas virtuales.

• Mejora de la calidad de la superficie (menos artefactos de picos).

• Varias correcciones de errores y mejoras de rendimiento.

Producción virtual

Previsualización de datos de Live Link

Ahora puedes previsualizar los datos de Live Link en el visor del editor sin necesidad de preparar ningún actor ni malla esquelética. El actor Previsualización de datos de Live Link muestra todos los datos de tus roles de animación, transformación, cámara y marcador en un único y práctico actor.

También proporcionamos componentes del actor para herramientas personalizadas de utilidad en el editor. El gestor de captura de movimiento los utiliza para visualizar tus datos de Live Link.

Grabación sólida de LiveLink Hub

Hemos mejorado la solidez de LiveLink Hub para hacer frente a los cambios de tamaño de los datos de los sujetos a lo largo del tiempo, por ejemplo, cuando se pierde el seguimiento de un sujeto y luego se recupera durante una grabación.

Puedes actualizar las grabaciones a partir de versiones anteriores al nuevo formato con una opción del menú contextual de la lista de grabaciones.

Componente de transmisión de Live Link

Es posible añadir el nuevo componente Transmisión de Live Link a los actores del nivel y convertirlos en sujetos de Live Link para que otros dispositivos de la red local reciban animaciones. El componente de transmisión es compatible con las funciones Transformación, Cámara y Animación.

Este nuevo componente permite procesos de trabajo en los que se puede utilizar un proyecto ligero de Unreal Engine para el reposicionamiento esquelético y luego transmitir la pose de reposicionamiento resultante a otros proyectos de Unreal Editor de la red, lo que convierte a UE en el software DCC de reposicionamiento. La tasa de fotogramas de la animación transmitida es igual a la tasa de fotogramas del subproceso del juego.

Transmisión de datos con pausa en Live Link

Ahora puedes pausar y reanudar los datos desde los sujetos de Live Link en el panel de Live Link y LiveLink Hub. Puedes pausar los sujetos individualmente o en grupos.

También hay funciones de secuenciación de comandos de Blueprint para controlar la pausa desde tus herramientas de edición personalizadas. El gestor de captura de movimiento ahora utiliza esta API para controlar la pausa de los sujetos.

Dispositivo de Unreal Editor en LiveLink Hub

En futuras versiones, la funcionalidad del dispositivo de grabación de Switchboard se migrarán a LiveLink Hub para configuraciones de captura de movimiento multiusuario. En UE 5.7, en LiveLink Hub ahora puedes controlar la interfaz de Slate y el inicio y parada del grabador de tomas en los clientes conectados de Unreal Editor, utilizando un nuevo complemento denominado Live Link Unreal Device, que se encuentra en fase experimental.

Este nuevo enfoque mejora la solidez de la grabación de tomas en varios clientes, reemplazando el antiguo sistema de mensajes de OSC que empleaba Switchboard, y proporciona control al usuario sobre lo que debe grabar cada cliente y qué clientes tienen permiso para grabar.

Acoplamiento dinámico de elementos en el gestor de captura de movimiento

Al reposicionar la captura de movimiento, a menudo se producen desfases entre las manos del ejecutor y las manos de tu personaje de captura de movimiento. Esto supone un problema a la hora de intentar alinear los elementos de rastreados con el personaje.

El nuevo componente Acoplamiento dinámico de elementos te permite mover un elemento con datos de captura de movimiento, pero añadiendo un desfase dinámico para mantenerlo en las manos de tu personaje.

El componente PCapProp ahora tiene una función que se puede anular desde Blueprint para permitir a los usuarios escribir su propia lógica de acoplamiento dinámico. Se proporciona un ejemplo de implementación en el gestor de captura de movimiento que debería funcionar para la mayoría de los elementos independientes.

Mejora de la creación de mallas del ejecutor en el gestor de captura de movimiento

Para obtener un resultado de reposicionamiento más preciso, es recomendable usar una malla esquelética ajustada a las proporciones de los datos de Live Link del ejecutor.

Hemos mejorado el proceso de trabajo en el gestor de captura de movimiento para crear este recurso, de modo que funcione con escenarios en los que el origen del escenario no esté colocado de forma conveniente y con sistemas que emplean sistemas de coordenadas diestros.

Composure

Unreal Engine 5.7 reintroduce Composure como un sistema moderno para la composición en tiempo real, compatible tanto con entrada de vídeo en directo como con paneles audiovisuales de archivo o imagen. El nuevo Composure es una herramienta basada en capas con numerosas mejoras respecto al sistema anterior, entre las que se incluyen:

• Una experiencia de usuario rediseñada y un proceso de trabajo ágil.

• Integración de sombras y reflejos eficiente para imágenes de acción real mediante pasadas de renderizado personalizadas.

• Un sistema de codificación mejorado.

Perfil de medios

Históricamente, la gestión de entradas y salidas de vídeos en tiempo real en Unreal Engine requería de múltiples recursos (fuente multimedia, reproductor multimedia, textura multimedia, etc.) para pasar del punto A al B. El perfil multimedia busca consolidar todos estos elementos en un único recurso de configuración para una determinada configuración de dispositivo y proporcionar numerosas mejoras en el proceso de trabajo, como:

• Añadir dinámicamente varias fuentes y salidas multimedia y seleccionar la opción de hardware deseada (por ejemplo, AJA, Blackmagic, NDI).

• Previsualizar simultáneamente múltiples fuentes de E/S.

• Capturar salidas multimedia.

• Configurar el código de tiempo y el genlock con respuesta inmediata.

• Acceder cómodamente a la funcionalidad de E/S de vídeo en herramientas relacionadas, como Composure, con un solo clic.

Protección contra interrupciones del grabador de tomas (experimental)

La actualización de UE 5.7 añade compatibilidad con la protección contra interrupciones durante la grabación de tomas. Ahora puedes configurar el grabador de tomas para que reduzca la velocidad de grabación y así evitar la pérdida de datos. Si se perdiera un fotograma, el grabador de tomas puede ajustar la evaluación del motor para dar tiempo a que se graben los datos antes de ponerse al día.

• Graba datos completos de forma más fiable.

• Visualiza las áreas problemáticas en las que podría perderse la integridad de los datos.

• Toma decisiones informadas en el momento sobre la calidad de tus grabaciones.

Widget de texto editable de tokens de nomenclatura

Hemos añadido un nuevo widget de Slate y UMG Texto editable de tokens de nomenclatura con compatibilidad directa para tokens de nomenclatura. Ahora puedes crear fácilmente herramientas de procesos con compatibilidad con tokens de nomenclatura. Cuando se seleccione, el cuadro de texto mostrará la cadena {token} sin evaluar. Cuando se confirme, el cuadro de texto mostrará el texto del resultado evaluado.

• Búsqueda y autocompletado {tokens} directamente desde el cuadro de texto.

• Visualiza inmediatamente el valor del token evaluado directamente en el cuadro de texto.

Disponible con el complemento NamingTokens.

Plantillas de cronograma para esquemas de montaje cinemático

Los esquemas de montaje cinemático ahora pueden hacer referencia a secuencias de nivel y montajes cinemáticos existentes como plantillas para el cronograma del secuenciador. Puedes especificar una plantilla de destino y hacer que ese cronograma se recree cada vez que crees un nuevo montaje cinemático utilizando el esquema.

• Diseña tu cronograma base con antelación.

• ¡Reduce las repeticiones y los errores al crear tomas, escenas, secuencias de iluminación y mucho más!

Disponible al utilizar el complemento Cinematic Assembly Tools (CAT).

Montajes duplicados con sustitución de referencias

Ahora es posible duplicar montajes en una nueva ubicación con sustitución de referencias. Ya no tendrás que crear, cambiar el nombre y volver a referenciar subsecuencias manualmente al duplicar un montaje.

• Duplica en una nueva ubicación y cambia el nombre automáticamente en función de los metadatos y tokens del montaje.

• Las subsecuencias se duplican, renombran y vuelven a referenciar de forma procedimental a fin de garantizar que ninguna referencia se pierda, cambiando todas tus tomas antiguas.

• Fácilmente accesible desde un asistente limpio y sencillo.

Compatibilidad con SMPTE 2110 de Nvidia Rivermax para BlueField-3

El complemento Nvidia Rivermax de Unreal Engine 5.7 es compatible con las DPU BlueField-2 y BlueField-3, con funcionalidad validada en nDisplay para efectos visuales en cámara.

Actualizaciones del SDK de la plataforma

• Windows

  • Visual Studio 2022 v17.14 o posteriores

  • Windows SDK 10.0.22621.0 o posteriores

  • LLVM clang

    • Mínimo: 18.1.8

    • Recomendado: 20.1.8

  • Intel oneAPI

    • Mínimo: 2025.2.0

    • Recomendado: 2025.2.0

  • .NET 8.0

• Versión del IDE con la que compila la granja de compilación

  • Conjunto de herramientas Visual Studio 2022 17.14 14.44.35207 y SDK de Windows 10 (10.0.22621.0)

  • Xcode 15.4

• GDK

  • SDK de Windows mínimo: 10.0.22000.0

  • GDK: abril de 2025

  • Versión de recuperación más reciente

  • IDE compatible: Visual Studio 2022

• Linux

  • Desarrollo nativo de Linux

  • SO recomendado: Ubuntu 22.04, Rocky Linux 8 o posteriores, Redhat Linux 8 o posteriores

  • Compilador: Clang 20.1.8

  • Cadena de herramientas de compilación cruzada: v26 basada en Clang 20.1.8

  • Nota: Los usuarios de Unreal Engine en Linux deben actualizar su sistema operativo para utilizar SDL3. Si quieres más información, consulta Updating Unreal Engine on Linux to SDL3.

• macOS

  • SO recomendado: macOS Sonoma 14 más reciente

  • SO mínimo: macOS Sonoma 14.0

  • Xcode recomendado: 15.4 o posteriores

  • Xcode mínimo: 15.2

  • SDK de macOS compatible: 14 y posteriores

  • Nota: las versiones compatibles de Xcode se han rebajado desde UE 5.6 debido a algunos problemas con la compilación y la vinculación al utilizar las últimas versiones.

• iOS/tvOS/iPadOS/visionOS

  • SO recomendado: macOS 14 Sonoma más reciente

  • SO mínimo: macOS Sonoma 14.5

  • Xcode recomendado: 16.1 o posteriores

  • Xcode mínimo: 15.4

  • Versiones de SDK objetivo compatibles:

  • Versión de SDK de iOS: 15 o posteriores

  • Versión de SDK de iPadOS: 15 o posteriores

  • Versión de SDK de tvOS: 15 o posteriores

  • Recomendado: visionOS 2.4 con Xcode 16.3

    • Nota: v2.5 y x16.4 han superado una prueba muy limitada y es probable que funcionen bien. Es probable que las versiones inferiores hasta v2/x16 funcionen.

  • API de gráficos para iOS: Metal 2.4 - 3.1

  • Otras notas

    • Shader Model 6 (SM6) requiere macOS 15. Esta compatibilidad aún está en fase beta y no la recomendamos para producción de momento.

• Android

  • Android Studio Koala 2024.1.2 del 29 de agosto de 2024

  • Android NDK r27c

  • SDK de Android

    • Recomendado: SDK 34

    • Mínimo para compilar UE: SDK 34

    • SDK objetivo predeterminado para el envío: SDK 34

    • Nivel mínimo de instalación de SDK: SDK 26

    • Se recomienda AGDE v23.2.91+ si estás utilizando la depuración AGDE, ya que esta versión contiene una corrección para un error SIGBUS.

  • Build-tools: 34.0.0

    • Si intentas utilizar 35.0.0, puedes tener problemas si usas aidl en Windows. Se ha solucionado con 35.0.1.

  • Tiempo de ejecución en Java:

    • OpenJDK 21.0.3 (16 de abril de 2024)

    • Entorno de tiempo de ejecución OpenJDK (versión 21.0.3+-12282718-b509.11)

    • Servidor de VM OpenJDK de 64 bits (versión 21.0.3+-12282718-b509.11, modo mixto)

  • Otras notas

    • UE se ha actualizado para utilizar Gradle 8.7 y la versión del complemento de Gradle para Android (AGP) que utilizamos se ha actualizado a la versión 8.5.2. Si utilizas Android Studio para depurar, te recomendamos que utilices Android Studio Koala. Ladybug también funciona, pero no actualiza Gradle o AGP desde las versiones anteriores.

    • Cuando elijas tu nivel de NDK, deberías optar por android-26, que admite Android 8.0+.

• EOS

  • 1.18.1.2-47370208

• Steam

  • 1.57

• Switch

  • Versión predeterminada de SDK: 20.5.6

  • Versión predeterminada de firmware: 20.1.0-2.2

  • Versión mínima de SDK: 18.3.1

  • Versión mínima de firmware: 18.1.0-1.0

  • Administrador de paquetes de Nintendo: 1.7.0

  • IDE compatible: Visual Studio 2022

• Switch 2

  • Versión predeterminada de SDK: 20.5.6

  • Versión predeterminada de firmware: 20.1.0-2.2

  • Versión mínima de SDK: 19.3.5

  • Versión mínima de firmware: 19.1.0-1.4

  • Administrador de paquetes de Nintendo: 1.7.0

  • IDE compatible: Visual Studio 2022

• PS4

  • SDK de Orbis predeterminado: 12.508.001

  • SDK de Orbis mínimo: 12.008.011

  • Software del sistema: 12.508.001

  • IDE compatible: Visual Studio 2022

• PS5

  • SDK de Prospero predeterminado: 11.00.00.40

  • SDK de Prospero mínimo: 10.00.00.48

  • Software del sistema: 11.00.00.43

  • IDE compatible: Visual Studio 2022

• ARCore

  • 1.48

• ARKit

  • 4.0

• OpenXR

  • 1.1.46

  • Los tiempos de ejecución de OpenXR 1.0 y 1.1 son compatibles y cualquiera de los dos puede deshabilitarse en la configuración del proyecto.

Notas de lanzamiento

AI/ML

Neural Network Engine (NNE)

New:

• Added multi-task support to the IREE CPU backed NNE runtime.

• Upgraded IREE to version 3.5.0. for NNE plugin NNERuntimeIREE.

Animation

Animating in Engine

New:

• Added a 'Tolerance' To the ControlRigPoseMirrorSettings Project settings that is used to match Controls also by position in rest pose. We still match by the Mirror table first, and fallback to position based matching. We also now cache the tables and reset them if a mirror table property is changed.

• Improved Anim Details

  • UX Editing multiple values no longer displays the first property value.

  • Releasing focus on multiple values no longer sets the first property value.

  • Shift clicking to the left of a property name no longer resets the property.

  • Added support for math expressions with multiple operators.

  • Removed support for =operator syntax, instead use operator =, e.g *=3 to multiply the current value by 3.

  • No longer show parent controls of the current selection, avoiding showing too many channels when a selected control has hosted channels.

  • Now follows the same order as Sequencer for non Control Rig properties

  • Now uses meta data of Control Rig elements and Object Properties that sequencer controls, value ranges are now displayed and respected.

  • Selected Anim Details properties now navigate to their value widget when pressing tab.

• Animator Kit:

  • Added a new Locator utility rig.

  • Adding static mesh locators and materials.

• Curve Editor:

  • The Set Start Playback Range and Set End Playback Range shortcuts now work in the Curve Editor as well as Sequencer.

  • A new preference, Panning Mouse Button, allows you to choose whether right or alt-middle mouse button, or both should be used for panning the curve editor view. Also, alt-right now always zooms in/out.

  • The Next Key and Previous Key shortcuts now work in the Curve Editor as well as Sequencer.

• Ensured we load an animation instead of trying to just find the package before we "Bake To Animation" so that it doesn't try to create a new asset.

  • Updated AnimationEditorUtils.cpp

Bug Fix:

• Deleting a Bool channel can no longer set the key at another time if AutoKey and KeyAll is on.

• No longer adds anim layers to level sequence unless needed.

• Constraints now work with Pivot Tool.

• Fixed shift click so it always goes to the last selected object, added a hot key to toggle pivot and motion trail modes.

• Made sure to automate tangents when baking.

• Made motion trails enter/exiting undo/redoable.

• Motion trails can be selected without a focused viewport.

• Made sure Rotator/Location/Scale controls have a curve color

• Pose library can paste onto hidden control rigs

• Made the AnimSequencerExport Blueprint type

• Anim Details:

  • Properties now reset their values to the initial value of controls when clicking reset to default.

  • Now also displays properties that reside within a Shot Track.

  • Fixed navigation not working in some cases.

  • Fixed an issue in Anim Details where selecting a component in a plain location, rotation or scale control would not select the control in Curve Editor.

  • No longer shows objects if keys are selected only.

  • Fixed property value widgets are losing focus while scrubbing if a blueprint actor is controlled.

  • Fixed in some cases editing Anim Details properties creates more than one undo step.

  • Fixed Anim Details options no longer showing when reentering animation mode

  • Fixed an issue where Anim Details displayed the actor or component name instead of the track name for attributes.

• Curve Editor:

  • Fixed issues where bezier curves were not always painted correctly.

  • Fixed an issue where curves were not painted when none of its keys were visible.

  • Fixed an issue where linear pre-/post-infinity extrapolation was not always painted correctly

  • Baking keys with a value different than 1 would increase range

  • Fixed an issue where pre-/post-infinity was not painted correctly when the first or last key's tangent mode was linear and pre-/post-infinity interpolation was linear

  • Fix an issue where curves flicker hovered and unhovered while editing

• Motion Trails:

  • Made sure the Motion trail state stays on with asset reload.

  • Fixed strobing frame coloring with dashed by setting the start frame to be eval range start so it doesn't change when view range changes.

  • Fixed crash when drawing HUD since trail may not be updated due to how the hud draws. Clean pin state in UI when using modifiers.

• Fixed an issue where changing additive animation modes with root motion on causes inconsistent root position when going from an additive mode to none.

• Fixed a bug where starting an animation with a non-zero playback time (like rewind debugger can do) would cause an incorrect root position.

• When merging sections no longer see if it's in range, just extend it so we can match up how it works without the merge.

• Now only compensate from the game thread.

• Can now set or add keys when recording control rig keys, previously we would just add keys causing duplicates.

• Anim Layers:

  • Bake Fix for absolute with additives when doing per frame bakes.

  • Make Name Column not shrink when shrinking

  • Layers show up when added to sub sequence

  • Keep track of open anim layer UI on the anim layer asset data.

  • Fixed duplicate/merging control rig sections when the channel layout is different between sections.

• Made generic vector channel data display more robust for position/rotation/scale control types. This also fixes the euler curve filter not recognizing rotation keys coming from Rotator control types.

• Sequencer: When baking to control rig, the animation track is now disabled instead of the individual sections.

• Turn off throttle when mouse button is pressed not just on drag so scrub time doesn't throttle in sequencer/curve editor

• Space Switching: Remove extra keys when clicking a space key by checking to see if we are changing into the same space in which case we can delete the extra key and the space key

• Hosted channels are no longer enabled if the parent is not enabled, this breaks selection. Also fixed anim layer selection with static meshes

• Sequencer: The scrub shortcut (b) now properly works in the viewport, Sequencer and Curve Editor.

• Fix Pivot square scale in different FOV's.

• Force LOD to 1 when ticking skel meshes when baking anim sequences. Sequencer may restore state which can change the lod during the bake process.

• Pivot Tool: Pivot render works in different FOVs

• Animation Kit:

  • Added aim option for blendParent. Changed control shapes to not be solid.

  • Fixing bad root attachment when no control rig exists.

  • Fixed an issue with the recompute mesh normals kernel used by Deformer Rigs in the Animator Kit plugin causing unexpected changes to mesh normals even if they are not influenced by deformer.

• Can no longer do space compensation from nongame thread which can happen when deleting many channels, in which case we probably don't want to compensate anyway

• Pose Library fixes, use alt drag for non additive drags and for additive it goes from -1 to 2.

  • Blending and additive mode are now working on mirror.

• Space Switching: Fix for undoing space switch key deletion.

• Tools such as snapper, trails and baking now work better with spawnables in nested subsequences

Character Customization (Mutable)

New:

• Added component naming support for spawned groom components.

• Debugger improvements:

  • Added support for Dataless parameters.

  • Unified Debugger and Editor compilation options.

  • Reordered some widgets for better use of the available space.

• Minor API improvements:

  • Actor:

    • Added ACustomizableSkeletalMeshActor::GetCustomizableObjectInstance.

    • Added ACustomizableSkeletalMeshActor::GetSkeletalMeshComponent.

  • Override Materials

    • Deprecated UCustomizableObjectInstance::GetOverrideMaterials(int32).

    • Added UCustomizableObjectInstance::GetSkeletalMeshComponentOverrideMaterials(FName).

• Restricted Passthrough Mesh Component to only support Skeletal Meshes.

Bug Fix:

• Fixed Material Parameter assert.

• Fixed Default Values not exposed to Blueprint.

• Fixed Skeletal Mesh Parameter morph check.

• Fixed UpdateSkeletalMeshAsync missing parameters.

• Fixed Materials comparison for merging.

• Fixed Textures and Meshes not being properly cached, their hash was not deterministic.

• Fixed a compiled API typo.

• Fixed multiple Dataless bugs:

  • Crash with Default Material parameter.

  • Crash with Dataless Morphs having names but no data.

  • Fix Texture Parameter not cropping images with layout operations.

• Fixed issues with GenerateMutableSourceImage cache.

• Added missing COI Contains API functions.

• Fixed public API Enum Parameter functions not working with the first parameter.

  • GetEnumParameterNumValues

  • GetEnumParameterValue

• Fixed deadlock when saving an asset + compiling a CO while asset registry was loading.

• Fixed streaming crash when no indices.

• Fixed meshes incorrectly reusing poses.

Deprecated:

• Removed deprecated 5.6 API functions.

Control Rig

New:

• Update default hotkeys and related functionality:

  • Set Solve Mode: Construction Event - 1

  • Set Solve Mode: Forwards Solve - 2

  • Set Solve Mode: Backwards Solve - 3

  • Set Solve Mode: Backwards and Forwards - 4

  • Set Next Solve Mode - M

  • Enable profiling- P

  • Show Controls as Overlay - U

  • Display Nulls - G

  • Display Socket - H

  • Display Axes for selection - J

  • Using hotkey for Profiling (P by default) now creates an undo step.

• Function nodes from other assets now show the asset name instead of the asset path.

• Flagged Render MorphTarget MaxBlendWeight CVar as safe for render thread, in order to avoid some warning logs.

• Made the animation show flags of the control rig editor never clip off of the viewport toolbar.

• Fixed duplicated Control Rig assets not resetting the asset variant ID.

• Control Rig Hierarchy no longer reserves transform space for non transform elements (curves and connectors).

• Control Rig Physics

  • Moved to its own experimental plugin, though it still requires the Physics Control plugin as well.

  • Added ability to import collision shapes and bones

  • Support for "wind turbulence"

  • Support for colliding against world objects

  • Add various cvars under controlrig.physics

  • Numerous improvements, especially access to functionality, and fixes

• Removed top level component concept from Control Rig Hierarchy

• Added GetSocketTransform

• Modular Control Rig:

  • Adding plugin Icon for Modules

  • Improved backwards solve for Foot Module.

  • Added Module tags and Root56 module to the correct ini files.

• Dragging a rig element onto the graph now offers an option to Get Metadata and Set Metadata.

• Update default settings and remember them per editor per user:

  • Display Axes On Selection is now enabled by default.

  • Display Axes On Selection, Axis Scale, Display Nulls, Display Sockets, Gizmo Scale, Hide Control Shapes, Show Controls as Overlays, Only Select Rig Controls are now saved per editor per user.

• Control Rig now only performs one copy of the hierarchy during initialization.

• Added line trace unit nodes.

• Added icon to plugin.

• Added Damp and Critical Spring Damp nodes to Control Rig.

• The Control Rig menu now shows directly in the viewport toolbar instead of being a submenu in the Show menu (eyeball icon).

• Nodes and hierarchy elements now offers options to find nodes by name locally and globally.

• Updates to Set Initial Transform from Current and related Commands

  • Set Initial Transform from Current is now only applicable for Bones, Nulls and Connectors.

  • For Controls, Set Initial Transform from Current is now Zero Controls.

  • For Controls, Set Initial Transform from Closest Bone is now Zero Controls from Closest Bone, and no longer applicable for Bones, Nulls and Connectors.

  • Set Shape Transform from Current is now Zero Control Shape.

Bug Fix:

• Moved findItemsWithTag to the construction event for performance.

• Fixed Control Rig curve container undo / redo breaking the curve list

• Fixed Control Rig editor resetting on compile curve operations made on the curve container (delete, rename, and import).

• Fixed a crash in Control Rig Pose adapter when removing bones from the skeleton while having a Blueprint with a Control rig opened in the asset editor.

• Fixed AnimNode Control Rig variable mappings initialization at OnInitializeAnimInstance.

• Control Rig: Need to update Rotation Order table with modular rig updated names.

• Fixed Control Rig Hierarchy updating more transforms than needed in propagate dirty flags function.

• Modular Control Rig

  • Added twist to legs.

  • Fixed IK/FK naming.

  • Added back public function from arm to leg so it picks up changes.

  • Fixed hind legs ik fk.

  • Changed leg and arm softness to off by default.

  • Fixed socket tooltip in Spine.

  • Fixed HindLeg FK controls not rotating.

  • Fixed AnimalNeck stretch.

  • Fixed Shoulder backwards solve by parenting to chest null instead of body ctrl.

  • Fixed HindLeg to always use connectors for creation instead of parent lookup.

• The editor now retains the Rig Solve Mode after compiling.

• Fixed Control Rig control module iterator lambda parameters creating copies of some expensive objects.

• Fix for client crash in FRigUnit_HierarchyInstantiateFromPhysicsAsset, due to Modular Control Rig object overrides getting garbage collected.

• Fixed ControlRig Hierarchy serialization not storing the previous hierarchy name map.

• Fixed crash in Control Rig editor when the preview floor mesh is not available, now it will trigger an error log and continue to load the asset.

• Avoid a crash in Control Rig when adding an empty rule to a connector.

• Fixed an editor undo redo in an AnimBPs that contains a Control Rigcrash, when performing a redo of a previously-undone SetPreviewMesh transaction.

• Anim In Engine: Rotator control keys are retained in Sequencer when the controls are changed to transform controls in the rig.

• Need to update Constraint Channels with updated Modular rig names, or constraints come in broken.

• Fixed ControlRig editor not executing post undo for the transient editor preview actor.

• Fixed undo / redo crash in Control Rig hierarchy mappings, when undoing across a construction transaction.

• Converted HandleExecutionReachedExit event to function callback, to avoid worker thread contention.

• Fixed ControlRig spawn control node details panel not generating the shape name list as a combo box.

• Fixed a crash in ControlRig when expanding a function reference from a different graph that contains a private function inside. Now the user will receive a localize request to make a local copy of the function.

• Fixed RigVM local variable customization not showing value for local variables not used in the graph and losing value after compiling.

Deformer Graph

New:

• Adding Deformer dynamically in Control Rig was changed to use Async Loading to avoid hitches when the Deformer loads.

• Enabled Compute Framework/Deformer Graph on mobile platforms.

• Fixed SkinWeightAsVertexMask Date Interface providing incorrect data when a non-default skin weight profile is used.

• Fixed skeletal meshes getting invalid tangents when using deformer graph with opengl_es31.

• Fixed wrong category for a few deformer functions.

• Added a pre-built dual quat deformer that supports both morph and cloth.

Bug Fix:

• Made sure skin weight profiles are requested earlier so that we can avoid T-Pose on the frame that the deformer becomes active / LOD changes.

• Fixed copy pasting resource node with matrix3x4 type creating a node with no pin.

• Fixed an ensure related to deformer graph instance settings in packaged build caused by incorrect object name used when creating the settings object.

Gameplay

New:

• Make Motion Warping switchoff conditions and warp target direction mode experimental as these APIs will change in future.

• Added support for animation mirroring to UAF.

  • Note this is a first pass and not fully matching Animation Blueprint's capabilities yet.

• Added a new version of AddAnimationNotifyEvent() that supports blueprint exposed data from notify events.

  • This helps prevent data loss when copying/duplicating animation notify events.

• Add SmoothWalkingMode to Mover2.0

  • Added base class SimpleWalkingMode to help make writing walking modes easier.

  • Renamed AnimationMath -> SpringMath and made public Rename SpringWalkingMode -> SimpleSpringWalkingMode.

  • Added Velocity Spring functions to SpringMath Add character prediction functions to SpringMath.

  • Added documentation to SpringMath.

• Added support for PoseSearchDatabase searches returning multiple results

• Added experimental support to the motion matching node (FAnimNode_MotionMatching) for interaction searches (multi character motion matching, to mimic FMotionMatchingTrait).

• Added a custom make bp function for FMotionWarpingTarget to ensure that the custom actor is called to calculate the target transforms when a component is passed as an input.

• The ChooserTable randomization column can now keep track of multiple recently selected entries and reduce the probability of reselecting them.

• Added new Chooser table column type (FPoseSearchColumn) to support motion matching searches within chooser evaluations.

• Add a spring walking movement mode to Mover named "SimpleSpringWalkingMode". This uses a critically damped velocity spring model to translate and rotate the character.

• Removed UE 5.5 deprecations from PoseSearch plugin.

• Exposed anim to texture editor functions as a public interface.

• Add threadsafe method for getting curve asset float & vector values.

Bug Fix:

• Fixed UE::PoseSearch::SDatabaseAssetListItem potentially referencing a deleted asset.

• Fixed a crash when opening the PoseSearchInteractionAsset editor.

• Fixed FSearchContext::GetSampleRotationInternal and FAssetIndexer::GetSampleRotation not properly calculating the rotation relative to their reference bone.

• Fixed motion matching tracing during throttled or skipped searches.

• Stored FBlendStackAnimPlayer::StoredAttributes as FMeshAttributeContainer instead of FHeapAttributeContainer to support animation LOD changes in blend stack.

• Fixed a pose search database indexing crash when using a UAnimNotifyState_PoseSearchSamplingAttribute referencing a bone that is missing from any channel included in the pose search schema.

• Fixed root motion sampling in blend stack.

• Fixed the motion warping switchoff condition to use the correct target transform when component following ends.

• Fixed a crash in UPoseSearchFeatureChannel_Phase::IndexAsset when indexing assets with a single pose, usually caused by a very short animation in a pose search database.

• Fixed UPoseSearchDatabase::SynchronizeWithExternalDependencies mistakenly synchronizing transient assets into a database, leading to reference garbage collected assets.

• Removed notify guids from Pose Search Database hash generation, otherwise the hash can be non-deterministic.

• Fixed a crash in FAsyncPoseSearchDatabasesManagement::CollectDatabasesToSynchronize with Objects with invalid Object->GetClass().

• Fixed the Alias state nodes not working with getters like GetRelevantAnimTime.

Deprecated:

• Deprecated UPoseSearchDatabase TArray AnimationAssets in favor of TArray DatabaseAnimationAssets.

• Deprecated UPoseSearchLibrary::UpdateMotionMatchingState.

ML Deformer

New:

• Hide certain conflicting properties (categories even) from the advanced preview scene settings tab. This was needed because the MLD asset editor has its own mesh picking and animation playback. Changing those properties inside the preview settings tab would mess things up. So we now hide those specific conflicting settings.

• Make curves work with UAF.

• Added support for copy paste between input bone and curve lists.

  • Means users can copy/paste the input lists from one model to the other.

  • You can now right click the input list widgets and choose Copy and Paste.

  • Fixed a few bugs in the tooltips as well as unique curve group name generation.

  • Improved the UX a bit by setting a minimum height for the bone, curve, bone group and curve group widgets and some context menu improvements.

  • Fixed some UI refresh issues as well when adding bones or curves. Curve group and bone group coloring did not refresh properly.

• Improved performance of the asset editor. Improved responsiveness to property changes, faster loading, faster sampling of anims.

• Added a new console command "MLDeformer.DebugDrawInputPoses" which will draw the input pose to the ML Deformer. It can be useful to quickly visually see what meshes have ML Deformers on them, and what bones are included.

• GeomCache: Some improvements to the memory management. Prevented reallocs, resulting in faster performance.

Bug Fix:

• Fixed a problem where training with curves would cause a failure during training.

• Fixed a bug where curves on the skeletal mesh instead of on the skeleton would cause some error checking to fail.

• Fixed a crash when adding a bone to the inputs of the ML Deformer.

• Fixed a crash on undo on morph based models. Also changed the icon of the Train button.

• Fixed python errors when launching with "-game" as argument.

• Fixed a bug when training, related to masks of input animations. Training would fail with some error right after sampling.

• Moved the tick group from pre physics to post physics.

• Fixed a VertexDeltaModel python import error. This was because an import should have been inside the Train function, but it was in global scope.

• Fixed async loading issues.

• Some fixes where it would not detect curves.

Physics Control

New:

• Now supports using a mask when invoking control profiles, which means they can be applied to a subset of the character.

• Additional support for specifying control/modifier set names in function calls.

• Kinematic targets are now specified the same way across PhysicsControlComponent, RigidBodyWIthControl and ControlRigPhysics.

• Fixed duplication of the Linear/AngularTargetVelocityMultiplier and TargetVelocityMultiplier parameters.

Bug Fix:

• General minor fixes/improvements to the physics control asset editor, including a fix for a potential crash.

Runtime

New:

• Added pinning and toolbar to workspace viewport and remove scene description tab.

• Now supports drag/dropping multiple bones in the abstract skeleton binding editor.

• Bone items can now be dropped onto non-set items in the abstract skeleton set binding editor.

• Added a filter for attributes to anim asset browser.

• Added Initialize as a default implemented event in the UAF module.

• State Machine: Self transitions & UX improvements:

  • Self transitions and state re-entry are now possible.

  • Re-entering a state uses inertial blending and requires an inertialization node. Old content will not use the new re-entry feature but any newly built content, when re-entering a state, will create an error if an inertialization node is not present root-wards in the graph.

  • The target state must enable bAlwaysResetOnEntry for the inertial blend to trigger.

    • To aid with managing state-reentry, a new MinTimeBeforeReentry value has been added to transitions.

  • Added 'reverse transition' context menu option that just reverses the direction of transitions.

  • Relinking transitions to other states can now be performed from the transition tail as well as the head.

  • State alias list is now sorted alphabetically to make finding states easier.

  • Look and feel of state machines has been tweaked & improved.

    • Now uses SVG brushes to better scale.

    • Different node types (states, aliases and conduits) now have different shapes.

  • Transitions now rotate to follow their direction and have been moved closer together and closer to their link line.

  • Transitions now sort in front of states.

  • Links are now further apart and scale correctly with zoom level.

  • Selection of links now scales correctly with zoom level.

  • Details panels for states now show the anim node functions for their result node and have been rearranged.

  • Added 'force transition' option to the context menu for state machines that are currently being debugged.

  • Made machine entry nodes non-deletable.

• Extended the Create Asset menu to allow non-asset menu entries for wizards that create potentially multiple assets of various types.

• Added a picker widget for animation attributes.

• Added toggle to blend layer trait to blend in mesh space.

• Added live updating blend mask weights in the profile blend node.

• Updated animation blueprint interface icon in the 'My Blueprint' tab to show as blue when the function has been implemented.

• Exposed Curve Metadata API on the Skeleton to Blueprint and Python. This includes functions to query, add, remove and rename curve metadata as well as querying and setting material and morph target flags.

• Disabled adding set bindings without a set collection set.

• Added a viewport to the workspace for UAF.

• Paused preview animation while manipulating transform widget in animation editor.

• Added an asset wizard for help authoring UAF content.

• Added foundations for the abstract skeleton runtime.

• Added editors for the abstract skeleton assets.

• Added functionality to Open in New Tab via the context menu for collapsed nodes and function nodes in UAF

• Fixed collapsed nodes and functions in UAF workspaces being opened without context of their outer, leading to loss of access to variables.

• Fixed debug only assert when opening items via double click the workspace outliner.

Bug Fix:

• Fixed a missing drag-drop op for adding attributes to sets in the set collection editor.

• Caught a situation where the mesh asset in InitializeAnimScriptInstance is invalid. Also dealt with possible parallel anim eval tasks being in flight.

• Fixed a crash when trying to create a new UAF Workspace instead of picking an existing one when prompted to choose a workspace after opening a newly created UAF Graph.

• Fixed slow document navigation in the workspace editor.

• Fixed a crash when attempting to add an existing curve attribute to abstract skeleton binding.

• Fixed being able to rearrange a trait onto itself.

• Fixed for animation modifiers not reverting correctly and crashing in some instances.

• Fixed a crash when re-removing a pin on a blend multi node after undoing.

• Fixed a broken root motion extraction during animation modifier evaluation.

• Fixed a regression in root motion extraction which prevented animation modifiers from reading raw uncompressed data during the compilation process, causing them to fail

• Fixed missing text localization in pose asset widget.

• SkeletonCompatibility: Fixed a problem when using compatible skeletons where we could end in a situation where the source skeleton did not have a bone of the target skeleton, which could lead to a crash.

• RBAN: Ensure RBAN doesn't write NaNs into the pose.

• Fixed visualization of what the blend weight of the animation is in Animation Insights for Random Sequence Player. Now it takes the overall blendweight of the animation into account as well.

• Fixed the look at edit mode locator gizmo not updating location when changes are made in the details panel

• Anim State Machine:

  • Fixed incorrect duplicate GUID warning when a transition rule is shared.

  • Prevented renaming states to 'None'.

  • Fixed copy-paste of transition nodes creating duplicate GUIDs/assets.

  • Fixed clamping values preventing manual entering of valid negatives.

• Anim Sequence: Fixed thumbnail scene references preventing deletion when assets contain notify states.

• Anim Assets: Fixed a crash when creating a preview scene for assets with a deleted compatible skeleton.

• Fixed the animation sequence segment length

• Fixed a button in the montage editor not working due to property access type mismatch

• SkeletalMeshComponent: Fix meshes getting ticked offscreen incorrectly when using montage-related visibility options

• Fixed pose history and trajectory history desync by delta time, causing incorrect results especially noticeable when the component transform makes large translation and rotation, e.g. a 180 pivot.

  • This fixes a bug with bad pivot selection when the capsule rotation flips

• Fixed incorrect timings on trajectory history when delta time is not constant.

• Fixed duplicate trajectory entries around t = deltatime.

• Fixed the set collection editor not updating when renaming a set, and added rename to the context menu.

• Fixed the expansion state of tree items resetting when drag/dropping a bone in the abstract skeleton binding editor.

• Fixed drag-dropping segments into composite track not matching selection order.

• Fixed window scaling issue when dragging multiple notifies in the animation editor.

• Changed check to ensure in SkeletalMeshComponent to avoid crash using rewind debugger.

• Fixed many SAssetShortcuts unnecessarily refreshing on asset opening resulting in slow ABP navigating.

• Animation Budget Allocator: Enabled component tick when unregistering.

• Updated the animation attribute functions to not allow adding an attribute with a name that already exists.

• Anim BP: Fix cook non-determinism with generated 'mutables' struct

• Anim Instance: Fix memory leak when GC-ing both mesh & anim instance in the same pass.

• Fixed an issue with tooltip names in SOverrideStatusWidgets.

• AnimSequence: Fix uninitialized pose transforms being generated in some circumstances

• PropertyAccess: Fix memory leak when calling functions via property access that return non-POD values.

• Anim Decompression: Removed usage of deprecated GetCompactPoseIndexFromSkeletonIndex.

• Fixed copying notifies when duplicating an anim sequence so the new notifies no longer reference the old sequence.

• Fixed the UAF asset wizard template assets being visible in the content browser and selectable in the workspace picker etc.

• Added more inline crash details when invalid values are found in animation poses.

• PropertyAccess: Hardened GetAccessAddress in case of unexpected data.

• SkeletalMeshComponent: Fixed a crash when calling SetAnimInstanceClass during a notify callback.

• Triggered caching of all otherwise lazily computed data when a DNA is loaded from a binary stream, which can avoid potential race conditions if the same DNA reader is utilized in a multithreaded environment.

• Fixed not being able to move nodes within newly created comment nodes in Control Rig and UAF.

Deprecated:

• Removed deprecated Skeleton Compatibility code from the Skeleton class.

• Removed deprecated Curve code from the Skeleton class.

• Removed deprecated Mesh Linkup Caching code from the Skeleton class.

Sequencer

New:

• Property tracks can now be renamed.

  • Note, the tooltip will still show the actual name of the property being animated.

• Added setting to always stop when going to playback start or end.

• Sequencer Navigator: There are now columns for the sequence ID and the object binding ID which are useful for debugging purposes.

• Take Recorder: Add a cvar TakeRecorder.AllowPossessablePIEObjects to bypass disallowing recording PIE objects as possessables. The default is to not allow this (no change in behavior). This can be useful when recording a player pawn.

• Added scripting to text

• Added ISequenceVisitor callbacks for when the visit enters/exists a sub-sequence

• The camera cut track now supports multiple rows. When multiple rows exist, the camera cut track does not try to auto arrange sections.

• MovieScene: Exposed FLevelSequencePlaybackContext to other modules.

• Hot key scrubbing will continue playing if Sequencer was playing.

• Preview camera cuts in simulate. This also lets users enable/disable seeing camera cuts in PIE after ejecting from the player controller.

• The colors for the playback start/end range can now be customized by user settings.

• Added support for notification callbacks when animating properties.

• The timeline in the cinematic viewport now respects the snapping behaviors of the Sequencer timeline.

• Added fixes and improvements to the time space display. The desired time space and the local time space are now both drawn.

• Bake Transform now has an option to bake with time warp applied.

• Attach sections with Preserve None now default to infinite duration.

• 'Bake Animation Sequence' and 'Create Linked Animation Sequence' actions in Sequencer now remember the last folder that was used in the current Editor run.

• Bake Transform is now available in the Template Sequence and Camera Animation Sequence Editors

• The subsequence section's Origin Override Location/Rotation now respect the default float/double spinbox incremental behaviors.

• Sequences: Add PlayReverse function to actor sequence components.

• Editing scale channels in the Sequencer Key Details now has an option to preserve the scale ratio

• Save As is now available in the Template Sequence and Camera Animation Sequence Editors.

• Added the ability to get and set Mute Nodes, Solo Nodes, Deactivated Nodes, Locked Nodes, Pinned Nodes, and Binding Tags in Blueprints/python.

• The view and working ranges are no longer saved with the asset. Every time you open a level sequence, it will be zoomed to the playback range.

• Duplicate keys are now removed on mouse release

• Update tooltip to "The interpolation type for the initial keyframe" to clarify that this is only for the first keyframe on the track/section

• UE_API all blueprint exposed functions for Sequencer Scripting

Bug Fix:

• Refactored track instance bindings and added the concept of "volatile" paths to fix possible memory stomps when animating array items or instanced structs.

• Fixed an issue where when changing shots we could sometimes get one frame of t-pose on a character when using bForceCustomMode. The issue was that we were checking for custom mode too late in the frame relative to when we were potentially doing the binding to a custom anim instance.

• Fixed the color not reverting when pressing cancel on the color picker.

• Added an adjustment for an issue for capturing thumbnails for sequences. Renders at a square aspect ratio and cleans up some advanced rendering features to create the cleanest image possible like materials.

• When opening a sequence, the playback mode is now set to loop selection range if a selection range is set.

• Fixed the BakeToControlRig function. Now fetches the templateID for the sequence that we're in so that if the sequence we are working on is a nested, instance, or template sequence we can resolve objects within the function.

• Added support for indirect gizmo manipulation of sub track offsets.

• Added support for animating property bag properties.

• Fixed a possible GC leak with UMG animations. It happened when using an event track, and the widget is removed from its parent while the animation is playing, and then the inactive widgets pool is discarded and GC'ed.

• Sequencer Navigator: The marks column now properly updates when marks are changed/added/removed.

• Exporting a binding that doesn't have a valid spawnable template no longer crashes

• Fixed a GC error in restore state of skeletal mesh animation track.

• Properly implemented end-at-time feature.

• Now stores camera shake previewers as shared pointers because FGCObject classes are not relocatable.

• Fixed Material Parameter Collection track display name so that it's not set explicitly on creation. Instead, the display name is just the name of the MPC if the user hasn't changed it. This allows the user to change the MPC and the name will automatically change.

• Proxy bindings no longer allow you to mistakenly pick the same actor it is a proxy for.

• Key selection is no longer emptied when right clicking on the timeline.

• UMovieSceneSequence: Fixed nullptr crash.

• Fixed pre-roll/post-roll sometimes still evaluating sections that aren't set to evaluate there.

• No longer falls back to the double blender system when a property doesn't have blending information. Instead, it falls back to the fast path where we don't blend anything.

• Fixed broken support for ping-pong playback when we only cross the loop boundary once.

• Fixed the pre-animated state being incorrectly saved as "persistent" for root tracks.

• Deleting a muted track row now properly no longer causes other rows to lose their mute state.

• When a fixed timescale is set negative, ranges 2 levels down no longer collapse causing subscenes of subscenes not to play correctly.

  • This only fixes the case of fixed timescale. Similar issues still occur using the playrate/timescale curve.

• Copying a folder now properly copies root tracks as well.

• .MovieSceneSequenceExtensions::FindBindingByName now returns a more reliable binding because it gathers the names from FMovieScenePossessable and FMovieSceneSpawnable which are kept in sync with the actor labels.

• Fixed a regression with a deprecated code path for fetching what animation is playing for UMG Sequences.

• Fixed pause-at-frame logic, which was sometimes incorrectly pausing on the previous frame.

• Select All Keys Forward and Backward now properly select all the requested keys.

• Selecting a layer bar no longer mistakenly deselects component bindings.

• Collapse Nodes and Descendants now properly collapse after being expanded.

• Copying a folder now properly copies all bindings and their child component bindings.

• Payload objects for event keys are no longer lost.

• Disallow picking a proxy binding that's already bound to the current one.

• Remove the "Blocking Evaluation" checkbox from the advanced menu, since we can already set it from the playback options.

• Fixed ongoing focus issues in the key details. Sequencer are now committed when focus is lost and keys are not accidentally created with incorrect values.

• Fixed the time warp curve still evaluating even while muted.

• Fixed a bug where the keyable indicator would not update for the selected object in the details panel after opening a sequence. It required adding to the sequence or selecting new objects.

• Fixed pre-roll/post-roll sometimes still evaluating sections that aren't set to evaluate there.

• Removed calling Modify from SetPreRollFrames / SetPostRollFrames. The caller should be responsible for calling Modfiy().

• If you copy an event track from one sequence to another, the events in the pasted event track will point back to the blueprint director in the copied sequence. This is not allowed, so those events are now cleared.

• Fixed creating an object property track as a class property in python not properly setting the bClassProperty value which allows a class chooser to pop up instead of an object chooser.

• Fixed keys not selectable on multiple rows.

• Restored a section model expansion state to be closed if it was before, since RestoreLayout resets it to expanded.

• We now tear down the Take Recorder's Sequencer instance before we delete and GC the sequence.

• Re-added dropped support for Blocking Evaluation in UMG animations.

• Fixed a crash when reinitializing a Sequencer editor on a new sequence while the previous one had legacy tracks

• When importing cameras, now applies a uniform scale modifier to distance based parameters (Manual Focus Distance).

• No longer blends enum values, and make the byte track use the enum system when it animates an enum.

• Ensured that evaluation context buffers are flipped if an eval task is active prior to forced update.

• Added a potential fix for a memory corruption of UMG animation states.

• The topmost unmuted Cinematic Shot is now correctly evaluated.

  • Previously, if a muted Cinematic Shot was topmost, it wouldn't be skipped over.

• Fixed some properties that should appear to be animatable (i.e. FieldOfView and AspectRatio for Cine Camera Components).

• Fixed an issue that when converting to a spawnable, sometimes the original possessable meshes were still visible.

• Fixed undo of camera cut section now restoring the camera binding properly.

• Fixed regression of pre/post-roll behavior in the skeletal animation track.

• Creating the initial key for material tracks now respects the default interpolation type setting.

• Snap play time to pressed/dragged key only if snapping is enabled.

• Fixed a reference-leak in the Track Instance system.

• Setting the time of a key through the Properties menu now works properly.

• Keying specific channels of a transform through the Details Panel now properly sets the key with those current values (and not 0).

• Fixed calls to bool property custom accessors, which were using the wrong function signature.

• Better handling looping for camera cut tracks:

  • Added a new "HasLooped" flag on the evaluation context.

  • Assumes by default that looping sequences are "seamless" and do not create a straight/hard camera cut on loops.

  • Added an advanced evaluation flag to opt out of this assumption.

• Fixed undo not working when editing with control rigs.

• Now fully supports all camera and post-process properties when previewing blending camera cuts.

• Disabled ensure before cleaning up camera cut track viewport modifiers.

• Fixed regression in how skeletal animation sections behave when resized from the left edge.

• Take the first loop start offset into account when determining if a skeletal animation section needs to loop.

Deprecated:

• Deprecated FMovieSceneBinding::Name since it's redundant and not kept in sync with actor labels.

• Can now return multiple objects with FMovieSceneBindingResolveResult. FMovieSceneBindingResolveResult's Object is deprecated in favor of an array of Objects.

• Migrated text tracks to Movie Scene Tracks plugin (enabled by default). Deprecated MovieSceneTextTrack plugin.

Skeletal Editing

New:

• Skin weight profiles can now be switched directly in the skeletal editor viewport, if there are skin weight profiles defined for the skeletal mesh asset.

• Edit Weights Tool: Fixed removing weights from vertices weighted fully to a single bone turning them into unweighted vertices.

Bug Fix:

• Animation: Editing the text field in the curve editor of an anim montage no longer crashes.

Editor

Datasmith

Bug Fix:

• Fixed 3dsmax plugin support for 2026.

Framework

New:

• Fixed GetOwnerPackages() for instanced structs inside non-complex properties.

  • FStructurePropertyNode::GetOwnerPackages() fails at walking up the property nodes for a specific case, and may trigger an ensure. When stumbling upon an instanced struct, GetOwnerPackages() walks up by getting the direct parent.

  • However, this parent is not necessarily a complex parent (can be a non-object/structure property type). To make sure the walk happens correctly, the case should be handled the same way GetInstancesNum() does (get complex parent of parent).

• Added a few virtuals to cosmetic SGraphNode getters.

  • Useful while adding advanced styling in custom node editors. In some cases it might be possible to avoid overriding engine methods by implementing our own variants, with different names, but not in every case.

  • Also reusing original methods makes the programmer's intent much clearer - what part of the base class was actually overridden.

• Implements experimental Capture Stealing in ITF Input Router.

• Updated MathStructCustomization metadata extraction to include InstanceMetadata

  • This change updates metadata extraction for header row to include InstanceMetadata. It is useful when assigning metadata to Vector/IntVector types via other customizations.

• UToolMenu Items will now override any parent Tool Menu Items of the same name.

• Positioned Tool Menu Items that fail to be positioned will now be inserted at the end of the section.

• Improved reliability of legacy SExtensionPanel support in the new viewport toolbar. Extensions are only enabled when there is enough information to support their existence.

• ToolMenus: Adds options for whether a Tool Menu Entry with an insert position that can't find its target should insert anyways and/or log.

  • Defaults to both inserting & logging.

  • Disables logging if the ToggleViewportToolbar and ToggleHideViewportUI commands can't find the ToggleFullscreen command in the Level Editor Window menu.

Bug Fix:

• Fixed an edge case Blueprint Editor crash on exit.

• Fixed an issue where top-level toggle buttons in Viewport Toolbars looked like raised buttons.

• Users can now change the derived type on default value instantiations used to initialize a base type reference member in saved instance data when using override serialization.

• Fixed the asset reference filtering not working when dropping assets on Material, Niagara Script and Texture Graphs, or on nodes and pins of any asset graph type.

• Fixed inconsistencies between drag and drop visual feedback and drop behavior in Animation State Machine, Sound Cue, and Texture Graphs.

Deprecated:

• The old Level Viewport Toolbar Panel Extensions are now deprecated. They will be removed in a later version.

Interchange

New:

• Reduced memory usage when importing static meshes.

• Added a SubdivisionAPI custom schema for specifying per-prim subdivision level.

• Added support for array node attributes.

• Added support for subdividing static meshes and geometry caches when importing via USD Interchange.

• Added more C++ UsdWrapper types and tweaked the Unreal.natvis file to improve how they're displayed on the debugger.

• Upgraded MaterialX version to v1.39.3.

• Textures imported with non-power-of-2 dimensions or non-multiple-of-4 dimensions were previously automatically set to NeverStream and Uncompressed. This can now be toggled with a config setting :TextureImportSettings::bDoAutomaticTextureSettingsForNonPow2Textures .

  • Also when textures initially imported as nonpow2 are re-imported as pow2, they now get their settings automatically fixed to the defaults for pow2 textures.

• Improved the performance of importing skeletal meshes with multiple morph targets via USD Interchange.

• When importing USD stages through USD Interchange, SkeletalMeshComponent prims will be spawned with AnimSequences assigned to them, if any were imported.

• Added a "Use Single Bone" option to import a static mesh as a skeletal mesh with top node as the only bone.

  • If "Force All Mesh as Type" is set to "Skeletal Mesh" and "Use Single Bone" is checked, the imported skeletal mesh will have a unique bone at its origin called "Root".

• Added a new option to the USD Export Options dialog when exporting levels to USD called "Export to Nested Sub Folders", which restores the previous behavior of exporting asset layers to a folder structure that mirrors the content folder structure

• Interchange: Added support for importing OBJ into level.

• Reduced memory usage when importing skeletal meshes.

• Upgraded OpenUSD version to v25.08.

• Interchange USD can now import groom assets and groom caches.

• Added support for dome lights via SkyLightComponents when importing via USD Interchange.

• Removed FNavigationOctree::AddNode Warnings during Level Import.

• Implemented a Nanite triangle threshold value on the Interchange generic asset pipeline, in order to enable Nanite only for meshes past a triangle count size.

• The USD Interchange translator has a new setting for collecting prim metadata as translated node user attributes. It can also specify a regex for filtering of particular metadata fields.

• Refactored the LevelSequence handling for USD imports in order to properly support subsections due to references and payload arcs.

• Importing via USD Interchange will now reuse generated assets when importing instanced prims.

• Added support for OpenUSD on Windows ARM64.

• Refactored skeleton handling in Interchange USD to not consider the skeleton prim itself as a root joint, which prevents transforms applied directly to the skeleton from being ignored in some cases.

• Interchange USD imports that preserve the pseudoroot node will now produce a top-level actor named after the root layer's display name, as opposed to being always named "/"

• Now uses the default static mesh collision profile for static meshes generated via the USD Stage Actor imports.

Bug Fix:

• Fixed Reimport not showing skeletal mesh conflicts.

• Fixed missing AnimSequence assets when importing animation tracks via Interchange that have a total length below MINIMUM_ANIMATION_LENGTH (of 1/30 seconds)

• USD: Editing keys in Sequencer now properly update back to the USD Stage.

• Fixed node name collision suffixes appending to previous suffixes, producing names like Cube12345

• Fixed actors with identity transform being imported via Interchange with the inverse transform of their parents in some cases.

• Fixed imported LevelSequences overwriting others with the same name when importing some very complex USD scenes.

• Fixed cameras imported from OpenUSD with fStop of zero so that depth of field effects are correctly disabled.

• Fixed incorrect skeletons being imported via Interchange FBX in some edge cases when TransformLinks seem to represent local transforms.

• Fixed static mesh collider transforms being incorrect in some cases when importing into level with Interchange.

• Fixed some issues with baked skinned mesh transforms when importing skeletal meshes with morph targets via USD Interchange.

• Fixed how AnimSequences seemed to have no animation data after using Actions -> Import on the USD Stage Editor.

• Fixed issues with using Material Search Location when importing scenes with Material Instances via USD Interchange.

• Fixed automated reimports still showing the options dialog when reimporting via Interchange or USD.

• Fixed metadata not making it onto actor AssetUserData when importing scenes via Interchange in some scenarios.

• Now discards empty LevelSequences when importing from USD.

• Fixed SparseVolumeTexture assets not being generated by USD Interchange when importing scenes with volumes if the exact same volume node shows up on the stage more than once.

• Fixed a crash when trying to parse USD LodSubtreeAPI schema applied to skinned meshes.

• Fixed import of UsdPreviewSurface into Material Instances for USD materials that have output connections to other shader graph or material prims.

• Fixed performance bottleneck when importing many lights via USD Interchange.

• Fixed some name-prefix-based collision meshes not being correctly used when importing via Interchange in some cases involving name collision.

• Can now generate the desired simple collision meshes even if the shape disagrees with the provided mesh data.

• Fixed morph target normals and position offsets not being skinned with geomBindTransform when importing skinned meshes via USD.

• Fixed how Interchange USD was not using timeCodesPerSecond values when baking skeletal animation tracks.

• Fixed incorrect vertex ordering of subdivision surface meshes imported from OpenUSD when their orientation is "leftHanded" and subdivision is enabled.

• Fixed a crash when parsing some USD SkelRoots configurations with multiple Mesh prims that contain normals.

• Fixed how USD asset imports were persistently disabling the "Import Into Level" option to import actors.

• Fixed OpenVDB being imported via USD stages without compensation for the stage's upAxis and metersPerUnit values.

• Fixed level exports to USD always using absolute file paths for layer references and payloads.

• Fixed Euler flipping issues when importing some USD stages with complex rotation animation.

• Fixed invalid skeletons being produced when importing some USD stages with prim names that are not globally unique.

• Fixed various issues while importing an asset containing elements named "None"

• Fixed support for UDIM textures when opening or importing USD Stages via the USD Stage Actor.

• Silence a couple warnings when trying to fetch transforms from Interchange scene nodes with none authored.

• Fixed missing actors and assets when importing scenes via USD Interchange that contain sibling prims whose names differ only by character casing.

• Fixed a crash when resaving assets imported with Interchange after deserializing them with Interchange disabled.

• Fixed HeterogeneousVolumeComponents not refreshing after their SparseVolumeTextures imported via USD Interchange were reimported.

• Fixed incorrect skeletal mesh influences when importing skeletons with multiple root bones via Interchange USD.

• Fixed various import issues related to using names that resolve to NAME_None.

• Fixed risk of missing content when importing FBX containing assets or bones requiring name sanitization.

• Fix SparseVolumeTexture assets imported via Interchange USD ending up named as "Null" if the VDB filename itself was purely numeric.

• Fixed the handling of some skeletal mesh edge cases via Interchange USD, like nested LOD meshes.

• Fix transforms placed directly on LOD meshes being ignored when importing into level with Interchange USD.

Scripting

New:

• Exposed FullyLoadPackages/FullyLoadAssets functions to editor scripting via EditorLoadingAndSavingUtils

  • These fully load the given objects, so that UE no longer has a write lock on their on-disk files (eg, when needing to overwrite the file via an external application).

  • This is also available in the UI via Asset Actions -> Load, if you hold shift while clicking on Load.

• Added support for texture-based tool icons in Scriptable tools.

• Added support for setting a custom UUserWidget above the tool details panel of a Scriptable Tool.

• Preview Platform Blueprint Functions:

  • TogglePreviewPlatform: Toggle the Preview Platform On/Off

  • SetPreviewPlatform: Sets the Preview Platform.

  • The Preview Platform is set from a list of valid Preview Platforms, the same present in the Preview Platform Menu.

• Added a Disable Preview Platform Blueprint Node.

• Added a GetDrawableGeometryActor() BP function to fetch the actor that owns any line, point and triangle sets added by a Scriptable tool.

• Exposed FTSTicker to Python:

  • This exposes the superior and safer FTSTicker-based ticking method to Python, and existing Python scripts using the Slate-based ticking methods should consider migrating to use this new method (unless forwarding ticks to an embedded UI framework, which was the intent of the Slate-based ticking methods).

  • The new ticker callables can be registered via `unreal.register_ticker_callback(...)`, which takes a callable (taking a float delta time, and returning a bool where True means continue to tick), along with the delay (in seconds; default 0) that we should apply between each ticker callback. `unreal.unregister_ticker_callback(...)` can be used to remove a previously registered ticker callback.

  • Examples:

    • def run_once(dt): print("run_once") return False # stop ticking

    • unreal.register_ticker_callback(run_once, 1.0) # call run_once once after 1 second

    • def run_many(dt): print("run_many") return True # continue ticking

    • run_many_handle = unreal.register_ticker_callback(run_many, 1.0) # call run_many repeatedly after 1 second delays

    • unreal.unregister_ticker_callback(run_many_handle) # stop calling run_many

• Exposed the ability to include or exclude editor-only references from script asset registry queries

Bug Fix:

• Added an encoding fix for PipInstall to force a utf-8 encoding.

• Fixed a crash in ExecutePythonScript when Python was disabled at runtime.

• Fixed a crash when re-registering Scriptable tools during mode shutdown.

• Fixed reachable garbage objects warnings when compiling ScriptableTools containing ScriptablePoint/Line/Triangle sets.

• Fixed an issue with accept/cancel/complete actions not firing in ScriptableTools mode.

• Fixed 'no world was found for object' warnings when invoking WorldContextObject functions in a Scriptable tool.

• Fixed a crash when calling DataTable RemoveRow from editor scripting.

• Fixed non-deterministic tool order in Scriptable Tools category palettes.

• Added a fix to ensure AssetTools do not call slate functions in headless.

• Fixed Python Callback attached to Dynamic Delegate

• Editor can now run even if Python is not able to load properly.

UI

New:

• Significantly improved the Content Browser column sort performance for large search results.

• Updated the Content Browser navigation bar so clicking in the empty space edits the package path if available instead of the virtual path.

• Slate drawing optimization: fixed float comparison of the alpha that could send an invisible element to the renderer, for negative or small alpha values.

• In the graph editors, right clicking to summon the node context menu now includes the hovered wires connected pins, if any. This allows, for example, insertion of a 'NOT boolean' node on a bool wire in the blueprint editor

• Made the "Show Selected" action for actors always visible in the context menu.

• SlateIM: Add support for Tab widgets

• CommonUI:

  • Updated CommonWidgetCarousel to be more consistent in its widget caching.

  • Added an option to determine whether or not to cache widgets at all

  • Old behavior was to cache widgets in the carousel's RebuildWidget, but widgets added at runtime via AddChild would never be cached.

  • Currently caching is enabled by default to match the behavior when children were added at design-time, though this could result in increased memory usage in use cases where all widgets were added dynamically.

• Added a clockwise ordering option for DynamicEntryBox.

• Updated the source control Submit dialog to display full file paths for non-asset files in the Path column.

• Waveform editor: Add icons for fade options

• Waveform:

  • Now calculates LUFS and Sample Peak values on audio import, on Waveform Editor open, and on Waveform Transformation changes.

  • Now displays LUFS and Sample Peak as meta data when hovering over a soundwave in the content browser.

• The Path column in the Asset View will now display the package or object path of the row item if available instead of the virtual path.

• Redesigned Platforms menu moved from the toolbar to the main menu.

• Can now specify a screenshot view rect via FScreenshotRequest::RequestScreenshot:The view rect will be ignored if it is invalid (empty or not within the extent of the render target), or if bShowUI=true, since that takes the slate widget screenshot pathDefault behavior remains the same (to screenshot the whole window)

• Enabled 10-bit swap chains on desktop platforms even when the feature level is ES31.

• Slate: Modified GetCachedWidget:

  • GetCachedWidget now returns the Widget returned by RebuildWidget.

  • GetWrappedWidget returns the Widget return by RebuildDesignWidget if available. Otherwise, returns the widget returned by UIComponents via RebuildWidgetWithContent.

• Added InitializeInEditor function to UserWidgetExtension and WidgetBlueprintGeneratedClassExtension to be able to support proper initialization in Editor for Extensions.

• Added utility functions to query private states in the widget.

• UMG Bindings: Added a new Conversion Function SetVectorParameter that takes a FColor and converts to FLinearColor.

• Added support for package path suggestions to the Content Browser navigation bar.

• Added support for navigating to C++ class package and object paths entered into the Content Browser navigation bar.

• Optimized the font shaping process when using complex shaping (typically for Arabic).

• Added a Python script for generating an html color palette for the FColorList class.

• Updated mouse capture and high precision mode handling on Windows to save up to .5ms on redundant API calls

• A UFont can now be a wrapper around FCoreStyle::GetDefaultFont(), for use with editor UI.

• Added a CVar `Slate.UseSharedBreakIterator` to support shared ICU Break Iterators to reduce CPU usage. False by default.

• Added new Header and ToolHeader sections to the ToolkitBuilder.

• Added support for MVVM Bindings in asset diff tool.

• Exposed world context pin on MVVMViewModelBase. This allows blueprints on a Viewmodel to access world subsystems (assuming they have an object they can use to resolve the world context).

• Add SetLazyContentWithCallback to CommonLazyWidget to improve async usage in blueprints.

• Add blueprint function, SetViewModelByClass, for setting VM by class on a widget directly to simplify usage.

• Exposed a setter for CategoryToolbarVisibility in FToolkitBuilder.

Bug Fix:

• Fixed a regression where Toolbar buttons with a combined options menu did not display that options menu when the toolbar button was clipped.

• Fixed an issue where Spline-related UI elements were displaying XYZ axis labels and tooltips even when the editor was running in LUF coordinate mode.

  • Details: Updated the context menu and details panel for Splines so that axis labels, tooltips, and action names now correctly reflect LUF when active.

  • This includes context menu areas like SnapAllToSelected, SnapToLastSelected, and SetLockedAxis (temporarily disabled).

  • This also includes Details panel areas for Spline settings like Selected Spline Nodes Location, Rotation, Scale, Arrive Tangent, Leave Tangent, and Up Vector Logic was added to ensure these UI elements are now dynamically aligned with the current coordinate system.

  • XYZ (FLU) remains the fallback when LUF is not enabled.

• UMG Sequencer: Fixed 2 issues.

  • When adding an event track as the first item in a widget animation, the duration of the animation would reset to 0, and notably the playback range start would be set to exclusive (range as (0,0)). This would persist after the length changed, for example to (0,500), meaning that any items placed on the 0 frame, such as events, would never evaluate.

  • When not encountering the above issue, items placed on the 0 frame would evaluate twice. This was due to a refactor to the way widget animation would playback.

• Fixed the Asset View Type column sorting by the full class path rather than the display name that is displayed.

• UMG:

  • Fixed named slot content not saving for named slot instances of widget blueprints that extend widget blueprints.

  • Fixed CDO de-sync with root widget property changes.

  • Added a fix to avoid crashes in cases of re-entrancy.

  • Various fixes for widget animations:

    • Fixed a crash caused by the runner being invalid for an unknown reason.

    • Fixed iteration of active animations that can grow during that iteration.

    • Fixed iteration of animated widgets that can grow during that iteration.

  • Fixed first and last frame evaluation of animations - Don't tick the widget on the first frame, wait until the next frame. The flag for that was lost during the animation refactor in 5.6 - Fix the evaluation time for when stopping which should indeed be the first frame of the playrange, not frame 0. This was incorrectly ported during the animation refactor.

  • Fixed how we consume the current animation time on play, to prevent events at frame 0 from firing twice.

  • Double clicking on a color key in the timeline now correctly opens the color picker.

• Fixed an inconsistency in the Viewport right-click context menu, where the Transform options were always ordered according to FLU rather than the expected LUF, even with LUF coordinate system in use. Behavior is now consistent and context-aware across coordinate systems.

• Can now pick struct type when class type picking is enabled, eg, from within the Data Table editor

• UMG Designer:

  • Fix to FWidgetBlueprintEditor::SelectObject to support UObject selection. Fixes a nullptr access when a property was changed in the detail panel on an object that is not a UWidget.

  • Fixed a crash in Drag and Drop operation. Added more checks around calls to GetCachedWidget that can return a null object during drag/drop and move operation.

  • Fixed a crash in UMG Designer Replace widget context menu operation in the Hierarchy panel. This happened when using the replace function with a User Created widget selected in the Palette panel.

• Optimized the widget editor's palette to reduce refresh cost in large projects.

• Fixed virtual texture thumbnails sometimes showing the wrong texture.

• Fixed an issue where screen-space widget components wouldn't render for players other than player 1 if splitscreen is disabled. There is now an option (ShowAllPlayerWidgetsWhenSplitscreenDisabled) to overlay the player layers, instead of culling out all player layers except for player 1.

• Fixed a regression that caused the editor to crash when attempting to place a cooked Actor-based Blueprint class via drag/drop.

• Fixed a memory leak when trying to trigger the display of a FCanvasBatchedElementRenderItem without a primitive to draw.

• Fixed an issue where SearchableComboBox couldn't be set back to the same value after resetting to default.

• Fixed an issue where SCommonButton wouldn't release when it loses focus

• Fixed a rare crash in SlateRHIRenderer due to both main thread and render thread possibly writing to the same arrays simultaneously.

• Fixed a situation where the Asset Dialog hotkeys either didn't function, or operated on the wrong widget.

• Slate: Fix SStackBox not respecting the Orientation slate arg.

• Fixed various possible crashes and bugs when importing offline fonts.

• Fixed Content Browser columns appearing as sorted after you click on their headers in the column view even when they are no longer the active primary or secondary sort columns.

• MetaSounds WaveAsset: Removed create new asset actions for unsupported assets.

• CommonUI:

  • Fixed not being able to click buttons with Virtual_Accept while binding hold actions to Virtual_Accept.

  • Ensure UCommonInputPlatformSettings load is done at the right time to avoid a synchronous load flushing async load request. Now PostLoad will be called as expected for all UPlatformSettings.

  • Fix persistent action bindings not always being registered as persistent actions.

• Fixed custom dialogs non-deterministically aligning their buttons.

• Fixed an issue where FQuat variables always displayed with the name "Rotation" in the details panel, regardless of DisplayName metadata or the variable's actual name. This fix ensures that the intended name is respected and shown properly in the UI.

• Fixed a typo in BoxElem.h

• Prevented Pin Value Inspector Tooltips from using global invalidation, as it can cause broken tooltips or crashes in some scenarios.

• SlateIM:

  • Fixed a case where child rows would not get removed when no longer drawn.

  • Fixed Viewport roots preventing mouse input for the whole viewport.

• Fixed an issue in the ListView Widget where OnEntriesGenerated would fire for each entry instead of firing once all entries are generated

• Fixed a crash in SObjectWidget OnFinishedPointerInput missing CanRouteEvents that causes nullptr access.

• Fixed Message Log not displaying when failing to save packages.

• PropertyPermissionList: Fixed buttons not appearing for functions marked CallInEditor details panel unless added to AllowList explicitly.

• Fixed an issue where users can't type polish letters s and a (with a tail) into the text input.

• Fixed an issue with Slate Screen Reader at initialization of the plugin.

• Add missing validation check with enabling or disabling SWindow.

• UMG Viewport: Made sure we EndPlay on the preview world during teardown.

Deprecated:

• Deprecated SCustomDialog VAlignButtonBox since it didn't affect the button layout, but could result in the button rendering outside the dialog if VAlign_Center was used.

UX

New:

• StylusInput: Added MacOS support.

• Change the default of bUseLinkedOrthographicViewports to `False`.

• Simplify the camera speed settings to just expose the camera speed. Min/max values are still exposed in settings.

• Slice graph connections by alt+middle-mouse dragging in the graph editor.

• Fix a bug where viewports could control the movement of a locked actor in a different viewport.

• Added support for direct manipulation of editor viewport orthographic near & far planes.

  • Added a new Editor Viewport Depth Bar that provides visual control over those planes.

• FDateTimeStructCustomization now has a tooltip. Hovering over a DateTime property's text box in the editor provides a hint at the format.

• Disabled use of a Template SoundWave, can be re-enabled in Editor Preferences->Audio Editor Per Project Settings.

• Switched to camera-relative vertical panning by default. Add an option for world-based vertical panning.

• Waveform Editor:  Instated Waveform editor as the default SoundWave editor.

• Splits viewport panning logic so that the middle mouse button and the left+right mouse button gestures are distinct. Middle mouse can be camera relative (and continues to be so by default) while left+right mouse button always move up and down.

• Outliner: Added visibility function versions that work on the selected actor's hierarchy and set H to default to toggle selected hierarchy.

• Asset Picker Size Scaling as Editor Preference: Added the Editor Setting "Scale Asset Picker Widget Size" to allow the size of asset pickers to be scaled up or down.

• Added a new "Toggle Selected Actor Visibility" command & behavior. This command takes the default "H" binding from "Hide Selected Actors". The command:

  • Hides selected actors if any actors in the selection are visible.

  • Shows selected actors if all actors in the selection are hidden.

  • Does not affect selection.

• Show template projects from all plugins:

  • Problem:

    • New Project dialog only listed template projects from enabled plugins Users couldn't see or start from templates included in installed but disabled plugins.

    • Empty/invalid background image paths in template categories showed broken visuals

  • Solution:

    • Updated search to include template projects from all discovered plugins Added warning icon + tooltip for templates from disabled plugins.

    • Selecting a disabled plugin template shows a warning/error box that the plugin is not enabled.

    • Warning is non-blocking (no modal), project creation proceeds after user confirmation.

  • Notes:

    • Keeps behavior lightweight.

    • Surfaces risk (no additional modal asking to confirm creation) but doesn't block flow.

Bug Fix:

• Ensured that the "Hide Selected At Startup" action now correctly applies to all selected actors, regardless of their current visibility state. Previously, actors that were already hidden were skipped by this action. With this change, both visible and non-visible actors will be consistently marked to start hidden on load.

Foundation

Build

New:

• AssetManager, AssetRegistry: Add Property AffectsCookRule to ManageReferences.

• Extended the AddExternalImportValidation of missing UClass imports to validate imports of all native types.

• Added support for the 'Activate' flag in PluginReferenceDescriptors. This fixes an issue where the 'Activate' flag would be deleted from plugin descriptors when running some UAT programs.

• IncrementalCook is now enabled for DLC cooks, but for DLC cooks it is still experimental and is not yet robust.

• UHT: Added support for engine version comparisons as preprocessor conditions.

• Prevented Clang builds for Windows from launching multiple link jobs simultaneously to avoid memory exhaustion.

Bug Fix:

• DLC Packaging: Fix missing .upluginmanifest when packaging without -DLCPakPluginFile.

  • With the plugin manifest present the output folder from a DLC package can be copied into a packaged game as-is and will load through the default plugin discovery and loading process.

• SavePackage: Fix errors in IllegalReferences diagnostic; it now more accurately finds the object and property that caused the illegal reference.

Core

New:

• Added UE::CFloatingPoint concept.

• Added value hashes and sizes to DDC replays

• RemoteObjects:

  • Transactional RPCs can be rescheduled per Actor. This means the transaction can abort and try other transactions while we wait for needed dependencies to service the RPC.

  • TimerManager now has some limited transactional support.

  • Exposed GetClass that may skip migrations when used with FRemoteObjectId.

  • Exposed GetRemoteId() on TWeakObjectPtr

  • Distinguished between Loaning out an Object and Reassigning a Borrowed Object. This helps clarify some situations, particularly where you're sending an object and maintaining ownership you can just check if you're Loaning it now, because ReassignBorrowed is now a separate case (which means another server has borrowed it, but you never owned it).

• Allow third-party crash handling to use `FAdditionalCrashContextStack`.

• Default WindowsPlatform.bClangStandaloneDebug to true. This slightly increases pdb size when compiling with clang, but improves debugging experience.

• FStateGraph and FStateGraphNode no longer timeout if -NoTimeouts is provided on the command line.

• Added [[nodiscard]] to mutex functions.

• Added [[nodiscard]] to TLess, TGreater and TEqualTo.

• Optimized TCppStructOps vtables to only include functions that will be called. This now prevents users from making UScriptStruct or TCppStructOps a friend in order to allow your class only constructible by the CoreUObject system.

• Refactored FInstancedPropertyBag's CopyMatchingValuesByID function to allow the caller to provide a matching function. Added CopyMatchingValuesByName that matches properties by name instead of ID.

• Added FRecursiveWordMutex to support very early and/or very late recursive mutex usage.

• Removed LLM dependencies on FCriticalSection and FRWLock.

• Eliminate static log records in the absence of source location and log tracing to reduce program size.

• Made mutating EnumClassFlags functions usable in constexpr contexts.

• Added UE_LIFETIMEBOUND to TValueOrError.

• Exclude trace state when log trace is disabled and optionally compile out source location from logging to reduce program size.

• Use Yield() instead of YieldThread() when spinning in mutexes to improve performance under heavy system load.

• Optimized ParkingLot::Wait when there is no timeout.

• Added UE::CContiguousRange and CPointer concepts.

• Added CCharType concept and applied it in TStringView.

• Added Max() functions to sets and maps - and TSparseArray which is needed for sets.

• Replaced TSortedSet's O(N^2) Append with an O(N) (at best) or O(N log N) (at worst) and added tests.

• Added some basic TSet tests, based on the existing TMap tests.

• Specialized FPlatformManualResetEvent for each platform that we target.

• Added FOutputDeviceFence to support lifetime management of dynamic log records

• Updated debug visualizers for TDeque, supporting visualisation of elements when the container is set up to use a different allocator such as TInlineAllocator or TFixedAllocator.

• Add explicit nullptr constructor/equality operators to TWeakInterfacePtr Mark functions in TWeakInterfacePtr [[nodiscard]]

• Fixed overallocation for unused null terminators in TStringBuilder.

• Added TFunctionWithContext to adapt a callable into a function pointer and context

• Improve accuracy of GC time limit by setting object destroy granularity to 10 (instead of 100) and provide a way for it to be tweaked per project with gc.IncrementalBeginDestroyGranularity.

• Optimized ParkingLot callback code generation

• Updated UE::Core::Private::StringLength to use TCString::Strlen outside of a constant-evaluated context, to speed up compile times with MSVC.

• Added UE_IF_CONSTEVAL and UE_IF_NOT_CONSTEVAL.

• Updated Oodle to 2.9.14.

• Used InitializeCriticalSectionAndSpinCount to avoid an extra function call during construction of FWindowsRecursiveMutex.

• Added CConvertibleTo concept mirroring std::convertible_to.

• Added a configurable intrusive unfair non-recursive mutex.

• Added TInstancedStruct::NetSerialize function.

• Removed contention on root flags when pinning weakobjectptrs.

• Improved the logging backlog to minimize the number of missed log lines during the initialization.

• Added TLogTemplate and control over log template allocation.

• Added IsLocked and IsLockedShared to the mutex types.

• Add Async.ParallelFor.DisableOversubscription which if enabled will only use existing threads which can be faster when cores are saturated.

• Added support for nested $format in structured log formatting.

• Added Intel OneAPI and Microsoft Clang 19 HWPGO integration.

• Added an ExecFileOverride resource to BootstrapPackagedGame.

• Optimized FLazyName to support constant initialization.

• Deflate, gzip & lz4hc compressors now honor COMPRESS_BiasSpeed and COMPRESS_BiasSize

• Added TExternalStringBuilder and support for TStringBuilder<0>

• Improvements to GameFeaturesSubsystem and FPluginDescriptor:

  • Added a new hook to PluginDescriptor to allow customized loading of uplugin json data.

  • Updated GFS to ensure that, at least in the editor, we will try to use the PluginManager's copy of the plugin data rather than re-reading it and deserializing it from json ourselves. This is necessary to take advantage of the customized loading.

• Enabled custom crash handling for GPU crashes.

• Optimization for FSoftObjectPath::ResolveObjectInternal to avoid the round trip to/from string.

• Add a console command, core.ResetEnsureState, to reset the ensure state so they fire again. This will cause all non-always ensures to trigger again if they've already been suppressed.

• Reduced memory use by FOutputDeviceFile by 992 KiB in the default configuration.

• Added better error messages when TLess, TGreater and TEqualTo when used with a type without the corresponding operator.

• Now validate LinkerSave unmapped objects against the package harvester excluded object list. This removes the limitation of asserting when FindObject is called while GIsSavingPackage is set.

• FPaths:CreateStandardFilename: changed behavior to normalize paths that cannot be standardized: .. is collapsed when possible.

• Added UE::CNotCVRefTo concept.

• Removed dependencies on ParkingLot from Windows stack walking

• Made the MSVC implementations of FPlatformMath::CountLeadingZeros and FPlatformMath::CountTrailingZeros constexpr.

• Added format string validation to LowLevelFatalError.

• Added UE::CStringViewable and UE::CCompatibleStringViewable concepts.

• ThinLTO is now enabled by default for Clang based toolchains.

• Added an experimental plugin, Global Configuration Data, that can be used as a single point of access to data that may be provided from different systems.

  • Can be used to have console and config data added to blueprints without additional code.

  • Additional data routers can be registers to expand on what data sources are available to the system.

• Added UE::CArithmetic concept.

• Added UE::CCompatibleCharType concept and some usage in TStringView.

• Added UEOps.h to aid in the correct generation of all binary comparison operators based on a couple of simple member function definitions.

• Replaced the UTF8CHAR enum with C++20's char8_t.

• Added checks for non-trivially-relocatable types being used in containers, particularly FGCObject-derived types.

• Added UE_REWRITE, a replacement for FORCEINLINE intended to be used on macro-like functions (rather than for optimization) by 'rewriting' a function call as a different expression.

• Enabled override max printed reference chains via `gc.MaxReferenceChainsToPrint` Cvar.

• FVector2D deprecated comparison operators (from 5.2 onwards) removed.

• Remove deprecated FLinearColor methods, deprecate unused DXT block structs.

• Enabled TSharedPtr and TUniquePtr to be usable as keys in sorted containers, and TUniquePtr to be usable as keys in hashed containers.

• Added std::initializer_list support to TSparseArray.

• Fixed UPS cooking indeterminism for TBox[2] structs on stack Make ForceInit constructor zero out padding.

• Fixed managed storage handle attempting to resolve an unmanaged file more than once after the manager becomes active.

• Added UE::CDerivedFrom concept.

• Added debug visualizers for UE::Math::TVector2<> and FDeprecateSlateVector2D.

• Extended `gc.PerformGCWhileAsyncLoading` to provide the option to garbage collect while async loading, only when low memory is detected (based on gc.LowMemory.MemoryThresholdMB).

• Package flags are now thread-safe.

• Add TargetRules.bIdenticalCodeFolding setting (--icf=all).

• Added intrusive unset optional support to TNotNull.

• Added a benchmark for mutex types.

• Added CSameAs and CDecaysTo concepts.

• Added UE::CIntegral concept.

• Added tests for Algo::StableRemoveIf.

• Added configs managing how GenericPlatformMallocCrash handles allocation requests on non-crashing threads, allowing them to permanently suspend on allocs/frees, suspend on allocs and skip frees, or process as normal.

• Removed dependency on FCriticalSection and ParkingLot in memory allocators.

• Retry in the shared mutex TryLockShared while there is not an exclusive lock.

• Added support for joining non-contiguous ranges in TStringBuilder.

• Added support for optional sub-object references in localized structured log formatting.

• Reduced codegen impact of ensure() macro.

• Added an overload of CreateLogTemplate that takes the format as FText.

• Added support for $locformat in structured log formatting.

• Added NotNullGet for retrieving the inner value from a TNotNull without an explicit cast.

• Experimental Visual Studio 2026 support.

• Added a new experimental API: SpringMath:

  • This includes some useful functions for critically based spring damping

  • Added experimental blueprint library for spring math to expose functions to BP

  • Added SpringMath::ExponentialSmoothingApproxQuat to mirror the existing function FMath::ExponentialSmoothingApprox.

• Added support for creating Property Bag Placeholder types for entity prefabs.

  • This is done via a new table added to package files: ImportTypeHierarchy table.

  • Each entry of that table contains hierarchical information for every FObjectImport entry that is a type (e.g., UClass).

  • This is the second part of a 2 part change. The first change introduced the package file header change along with the object version bump.

  • This change adds the remaining logic to save/load the new table and the change to use it when creating placeholders.

• Added support for AVX10.

• Added write helpers to RapidJsonUtilsAdded UE::Json::WriteCompact and UE::Json::WritePretty, to write a UE::Json::FDocument to a FString in either compact or pretty form.

• Added UE::Json::MakeStringRef and UE::Json::MakeStringValue to help convert a FStringView to a UE::Json::FStringRef or UE::Json::FValue when building a JSON DOM.

• Added some additional aliases to UE::Json that are needed when building a JSON DOM.

• Switched UE::Json aliases to use the UE FMemory allocator, rather than rapidjson::CrtAllocator.

• Added --prioritize-dependency-scanning SN-DBS build option.

• Added `FNonshrinkingAllocator`, which changes the shrinking policy to No by default.

• Added hidden MetaData works for base structs in Instanced Structs.

• Cooker:

  • CookPackageSplitter: Changed the return value of GetGenerateList to a struct (and changed the name to ReportGenerationManifest) so that generators can request that the package containing the generator be not saved.

  • Deprecated the ability to run the cook inside the editor process when launched from editor. The cook instead should always be executed in a separate invocation of the CookCommandlet. This has been the default since 5.3, and we are now deprecating the ability to change that default and will remove all support for it in 5.9.

  • Added the following commandline arguments:

    • -cookshowremaining

    • -cookshowpackagenames

    • -cookshowinstigators

    • These provide a clearer behavior than -dpcvars=cook.displaymode=1|2|4.

    • Each flag can be specified with a value: -cookshowremaining=1|0, or with no value, defaulting to 1: -cookshowremaining.

    • These flags override whatever value has been assigned via config or -dpcvars commandline.

• Introduced a mechanism for render asset updates to be abandoned by owning `UStreamableRenderAssets` so `UStreamableRenderAssets` can be garbage collected independently (See r.Streaming.EnableAssetUpdateAbandons). Abandoned render assets are ticked during GC or every streaming update if r.Streaming.TickAbandonedRenderAssetUpdatesOnStreamingUpdate is true (defaults to true).

Bug Fix:

• Changed FMonotonicTimeSpan::IsInfinity() to stop matching negative infinity.

• Fixed FMath::FindDeltaAngleDegrees and FMath::FindDeltaAngleRadians for input deltas outside [-540, 540] degrees.

• COMPILE_WARNING reports as error when WarningsAsErrors is being used.

• Fixed a potential infinite loop in the serialization of packed ints when loading malformed values.

• Fix potential deadlock in the scheduler if a foreground task is scheduling a background one.

• Fix potential deadlock in object annotations because of 2 different locks used in different order.

• Made -VerifyGC and -NoVerifyGc take all verification cvars into account.

• Fixed invalid access to memory location error in UnrealBuildTool.

• Made sure that pinned UObject are preventing GC of clusters they are part of.

• Fixed composite EPackageFlags not being shown in the debugger, caused by non-power-of-two enumerators.

• Fixed _GetUObjectPacked intrinsic for debug visualizers. This addresses an issue with visualizers for weak object ptrs not working in builds where UE_ENABLE_FUOBJECT_ITEM_PACKING == 1.

• Made TBox's InverseTransformBy and TransformProjectBy both check for box validity before transforming (matching TransformBy).

• Fixed issues trying to load redirected native classes using the StreamableManager (and AssetManager).

• Fixed a bug in GC timing where if it destroyed exactly 100 objects in a frame it could cause a large stall.

• Fixed many log categories having a default verbosity higher than their compile-time verbosity.

• Fixing a crash in CppStructOps caused by unloading a dll at an inopportune time resulting in a dangling pointer to a vtable.

• Fixed TMemoryWriter IndexSize to be a bit count.

• LaunchEngineLoop: Fixed a copy paste mistake in the error message, it now correctly identifies that it fails to load the Game Engine class instead of the Editor Engine class when instantiating GEngine.

• InstancedStruct: Fixed the operator= when copying from a TConstStructView.

• The loader will now flush any remaining async loads before PreExit to avoid async loading to perform operations past the exit point.

• Fixed UE_STATIC_ASSERT_COMPLETE_TYPE for zero-sized arrays.

• Enabled seeking to the end of a response body without returning CURL_SEEKFUNC_FAIL in the Curl implementation in DevHttp module.

• Fixed UI layout for a particular view of the crash report dialog where the screenshot preview can cover button controls.

• Fixed clang miss-leading indentation warnings.

• Checked zlib init and shutdown for errors.

• Cleaned up usages that expect nullptr_t to be in the global namespace.

• Fixed StaticDuplicateObject when Source Object class and Destination class are different.

• Fixed crash when loading content from corrupted pak or optional segment files.

• Disabled nuget audit for the dotnet Development configuration to prevent unactionable dotnet build errors.

• Force synchronous writes on type library input files.

• Fixed pipe and task timeout calculations that generated bad code.

• Deferred invoking the class initializer on duplicated objects until after subobject instancing has occurred.

• Disable 'C4702: unreachable code' when use bUseInlining is disabled.

• Fixed potential race condition in FConfigCacheIni::ForPlatform adding plugins without holding the lock.

• Fixed text import of delegate properties with full object paths, and made FDelegateProperty consistent with FPropertyMulticastDelegate on text export.

• Added static_asserts to TValueOrError to ensure that it's not instantiated with references.

• Fixed a FARFilter with only WithPackageFlags or WithoutPackageFlags set failing to return any assets from IAssetRegistry::GetAssets(...).

• Avoid TInstancedStruct::GetPtr/GetMutablePtr and TStructView/TConstStructView::GetPtr crashing when the underlying struct data is incompatible with BaseStructT

  • This will now ensure instead, though will still perform the bad cast in a shipping build, so any ensures need to be fixed!

• Fixed TStringView::CopyString for copying an empty range.

• Fix a missing test of MaybeWaitingFlag in FManualResetEvent before parking the thread.

• Fixed Algo::RemoveIf calling the predicate too many times in some cases, and added some tests.

• Rehashed map and set properties after instancing key subobjects in their overrides of FProperty::InstanceSubobjects.

• Disabled AutoSDK for LowLevelTests targets.

• Fix thread scheduler to properly apply the cvars TaskGraph.UseDynamicPrioritization, TaskGraph.UseDynamicThreadCreation, and TaskGraph.OversubscriptionRatio which can be used to modify thread performance.

• Adding -nocrashreports support for windows. When provided, we will log crashes/ensures/etc but will not perform more complex reporting that could risk hanging on a file pipe.

• Reimplemented TVectorRegisterType with partial specializations rather than std::conditional_t to work around alignment issue using Clang on Windows.

• Disabled custom property lists during native struct serialization.

• Fixed a race waking threads in FSharedMutex and FSharedRecursiveMutex.

• Added workaround for getting an array reference element from an rvalue tuple under MSVC.

Deprecated:

• Deprecated Alignment in TStaticArray and fixed UB behavior in it's GetData. Made TArrayView and Invoke constexpr.

• Deprecated TSortedMap::GetMaxIndex, fixed TSortedSet::GetMaxIndex and correctly commented TSet::GetMaxIndex and TMap::GetMaxIndex.

• Deprecated public and protected ways of initializing TStringBuilderBase from a buffer.

• Deprecated member TFunction::CheckCallable which was never intended to be public.

• Deprecated TIsConst.

• Deprecated PLATFORM_COMPILER_SUPPORTS_CONSTEXPR_BUILTIN_FILE_AND_LINE.

• Replaced bExactClass with EFindObjectFlags in the FindObject family of functions.

• Deprecated the original log template API.

• Delete FCbFieldIterator::MakeOwned() to avoid breaking the iterator.

Dev Tools

New:

• Added compile warning argument ordering.

• Wildcard support in project sections of UGS ini files.

• Improved the summary outputs of UnrealPak. The units of memory now scale with the number of bytes making it easier to read for both smaller and larger containers.

• UBT DefaultBuildSettings:

  • Build Settings V6 now applied to wundef.

  • Default Build Settings Updates for Targets - V6 - engine.

• BuildCMakeLib: Added support for building third-party projects with CMake using the Ninja build system.

• Adding capabilities to the warning defaults, cleaning up tests, adding more warning+error strings for easier long term adoption & toggling.

• UHT will flag U macros (i.e. UCLASS) found in skipped blocks of code as deprecated. This will be made a warning in a future version of UE.

• UBT Editor: Added graceful messaging for Target upgrade requirements on editor path.

  • Emit the target build settings version & build environment to target file for editor runtime consumption.

  • Consume target file metadata to improve error messaging for Target versions.

Bug Fix:

• Fixing a bug where UAT could hang waiting for output. We now log a warning instead.

• Shaders: Fixed the shader pipeline skipping work if the number of shaders to compile is less than the number of tasks available.

• Fixed an issue where if a TInstancedStruct is used as a function argument, Clang platforms would fail to compile.

• Fixed BuildCookRun to include base build .sig files when generating patches.

• Updating UHT to once again generate an error when a USTRUCT contains more than one base.

• Fixed an issue in UnrealVS that could cause UnrealVS.P4->History to open an empty window

• Updated UnrealVS - Includes fixes to test discovery and execution

• Corrected define usage (UE_BUILD_SHIPPING vs UE_SHIPPING)

• Fixed UHT parser issue where if FArchive is forward declared when used in the Serialize function declaration, UHT would fail to generate the proper code.

• Fixed inconsistent exception logging in Gauntlet.TestExecutor. It now consistently uses Exception.ToString().

• Fixed issue in UHT where it was allowing a USTRUCT to have multiple USTRUCTs as base classes.

• Fixed a bug where presets would be added to the global sync filters if the tab with the preset had its sync filter view opened and the okay button pressed.

• Fixed UGS not showing investigations as "resolved" when using Horde's metadata endpoint.

• Fixed destination files potentially not having the correct permission during SafeCopyFile in UAT, on non-Windows platforms.

Horde

New:

• BuildHealth Server Build: Added JobSummary telemetry.

• Hashed issue handler will now automatically check for a file property in the event's structured logging, and use that data in suspect finding. This should lead to suspect changes being identified more accurately, but relies on emitted warnings and errors including file metadata.

• Analytics:

  • Added a Build Health Dashboard View that shows step outcome history for selected templates & streams.

  • Add ExternalIssueKey & Fingerprint to the telemetry payload for issues. Also includes AnalyticsIntegrationTests.

• Added example of implementing a new Secrets Provider for Azure Key Vault. This secret provider is experimental and provided as an example of how to implement a custom secret provider.

• Added Secrets plugin configuration option WithAws that controls if the AwsParameterStore provider is enabled.

• Added new Secrets API api/v1/secrets/resolve/ that resolves a string to a property value of a secret. For example the string horde:secret:SecretName.PropertyName would resolve to the value of PropertyName for the secret SecretName.

• Only commits with Code CommitTag are considered when searching for Compile issue suspects.

• Removed the unused Password property from EpicGames.Horde.Streams.IWorkspaceType.

• Added the attribute ResolveSecret that allows properties in the Global Config to be resolved to the value of a Horde secret during configuration load.

  • If the property's value is of the form horde:secret:SecretName.PropertyName then if a secret SecretName exists and has a property PropertyName it will be replaced with the value from the Horde secret.

  • This allows sensitive configuration properties to move out of the configuration files to an external secrets provider such as AWS or HashiCorp Vault.

  • New: Updated the Password and Ticket properties for the Build Config's PerforceCredentials property to use the attribute ResolveSecret allowing Perforce credentials to be moved to an external secret provider.

• Changed build graph updates where a node that is skipped but modified does not fail the whole build. This allows the build to continue with only dependent nodes being marked as skipped while non-dependent subtrees can continue to run.

• Replaced the deprecated code coverage tool JetBrains.dotCover.GlobalTool with JetBrains.dotCover.CommandLineTools.

• Added to the Stream Config a StreamTags property, which is a set of name and Boolean pairs; and to the Schedule Config a Condition property.

  • The Condition property can be used instead of the Enabled property to control if the scheduled jobs for a stream should be enabled.

  • Each stream tag will have an environment variable named after it with the UE_HORDE_STREAMTAG_ prefix and a value of True or False, which can be used in BuildGraph script conditions.

• Fixed an issue where capabilities for agents was missing their RAM capacity.

• Updated Temp Storage to allow the maximum number of exports to write in a single request to be configurable from the agent settings. The new option is TempStorageMaxBatchSize and defaults to a value of 20. Modified from contrib .

Bug Fix:

• API encounters ".NET type System.Text.Json.JsonElement cannot be mapped to a BsonValue" on swagger API invocations.

• Fixed an issue where GetNext for ScheduledDowntime would return the previous downtime.

• Fixed an issue where the log for the Downtime Service would print the next downtime being in the past when an expired non-repeating downtime was in the global config.

• Server Tests: Fix the DatabaseIntegrationTest class to properly forward dispose calls to the mongoDBRunner.

• BuildHealth Server: Exposed DateUtc on GetCommitResponse.

• Fixed an issue where capabilities for macOS agents was missing information for:

  • CPU number of logical cores.

  • CPU performance and efficiency cores for Apple Silicon.

  • GPU name and core count.

  • User name, domain name and running as administrator.

• Fixed an issue where the Notices Get method would not return the start and finish times, and if the start and finish times are set then set the active value accordingly.

Insights

New:

• Adds pre and post state change callbacks for TraceLog channels. Allows instrumentations to deny state changes and provide a reason for the denial, as well as performing actions when a channel is enabled or disabled, such as sending initial state, resetting tracked state or activating tracking.

• Added a method of creating a TraceAnalysis session using a custom data stream.

• Added an ability to copy a tooltip value to clipboard from the bookmarks track.

• The PlatformEvents channel now uses callbacks to deny enabling channels and provide user feedback, if requirements are not fulfilled.

• Added support to save data traced via the Direct Trace mode to disk. FDirectSocketStream can now accept an optional FArchiveFileWriterGeneric used to write the data to disk.

• Added support for Frame Start and End Misc Trace events in the minimal trace API.

• Added config variables to provide variable trace log write buffer size and prevent writer sleeping. This helps prevent the write thread from getting saturated under heavy load.

• Increased version of Unreal Insights to v1.08, for the UE 5.7 Release.

• Improved management of TraceLog worker thread in various scenarios. The worker thread can now be started on demand.

Bug Fix:

• Fixed a startup deadlock when launching with -trace=memory without tracehost or tracefile.

• Fixed an issue where FTraceAuxiliary::Relay did not respect the Options parameter provided.

• Fixed an issue due to Trace gap detection using three sync points. Previous logic used two sync points to calculate gaps, but the engine sends out three. In some scenarios this caused an error in gap detection which meant a higher serial was chosen as the next serial. This would leave much of the trace data unprocessed.

Framework

AI

Bug Fix:

• Fixed an issue where selecting subnodes would result in the currently-edited property value to be discarded instead of applied.

AI Behavior Trees

Bug Fix:

• Fixed reinstantiation for Blueprint-based nodes using blackboard key selector.

• Fixed Blueprint reinstantiation issues with some BehaviorTree types.

• AAIController::UseBlackboard: Fixed to correctly return the result of trying to initialize the Blackboard.

• Changed InstanceIdx to use a const int32 to prevent a need for IntCastChecked to prevent possible data truncation.

AI Debugging

New:

• Added possibility in Rewind Debugger tracks to override the default behavior to step backward and step forward commands.

• VisualLogger log entry initialization can now also assign a valid location for components. With this change, double-clicking on such an entry will bring the camera to that location instead of the world's origin.

• Fixed GameplayDebugger local-multiplayer render duplication.

Bug Fix:

• Fixed ever growing buffer in FVisualLoggerBinaryFileDevice when VisualLogger is not set to record to file.

• Fixed debug draw helper functions and SmartObject visualization to properly handle scaled DPI.

AI EQS

New:

• EnvQueryTest_GameplayTags: Added searching for tags container in actor's components if actor itself doesn't implement IGameplayTagAssetInterface.

• Upgraded the description details of the UEnvQueryTest_Pathfinding test to better reflect its behavior in EEnvTestPurpose::Score mode.

Bug Fix:

• Fixed blueprint reinstantiation for EQS types

AI Navigation

New:

• NavLink Generation:

  • Added a name property to generation configs, and JumpMaxDepth can now be negative.

  • Activated the "enable" property now that multiple configurations are supported.

  • Added multiple link configurations for generated navlinks.

  • Added LinkGenerationSelectedConfig to debug a specific config.

  • Improved trajectory ground sample debug display.

• GameplayDebuggerCategory_Mass: Now draws a purple circle around entities that are LOD off.

• AsyncNavWalkingMode can use navmesh normal instead of physics hit normal.

  • Now always take the highest hit location in z when searching for ground location.

• Mass Navigation:

  • Added text to MassNavigation::Debug methods.

  • Added an option to avoid slowing down when steering.

  • Added a MassSceneComponentVelocityTranslator to copy velocity between mass entities and actors.

  • Updated NPC desired movement based on current velocity when in animate mode for root motion driven NPCs. This helps with smooth blending into animated states from steering when character is root motion driven.

  • Added navmesh path boundaries to mass gameplay debugger.

  • Added logs in the navigation flow.

• Mass Entity: Fixed an infinite loop caused by loop variable overflow ().

• NavMesh: Added a navmesh tile building optimization when using CompositeNavModifiers with lots of data.

• Mass Navmesh Navigation: Increase default corridor width used by FMassNavMeshPathFollowTask.

• Pathfind: Changed warnings to logs when InitPathfinding can't find a polygon at the start or the end location.

• Removed deprecated 5.4 navigation code.

• MassNavMeshPathFollowProcessor: Improved logging information and clamping distance on the closest segment.

• MassNavMeshPathFollowTask: Removed overlapping points when building a corridor.

• Mass Navigation and Avoidance:

  • Made a fix to apply max speed in UMassApplyForceProcessor.

  • Added debug to display standing entities in mass avoidance.

  • Pathfollow -> Made a fix to keep the steering force when near the end of a path (we want to apply the fade only on the avoidance forces).

  • Used stronger avoidance forces when getting out of environment boundaries.Added an optional tag to prevent moving backward while avoiding.

• Navigation: Added in the output log information regarding invalid pathfind requests and changed log verbosity from error to warning.

• NavigationSystem: Replaced legacy repository unregisternavrelevantobject method with UnregisterNavRelevantObjectInternal.

Bug Fix:

• Navigation:

  • Fixed a crash occurring when building navmesh on PIE ending.

  • Made a tentative fix for a crash occurring when navigation is being rebuilt because a navigation override is being removed when clearing world components.

  • Update SplineNavModifierComponent to apply the NavAreaToReplace to its modifier.

  • Guarded against zero DeltaTime in UPathFollowingComponent::FollowPathSegment to prevent division by zero ().

• NavLink Generation:

  • Fixed missing links on small navmesh patches.

  • Made a fix to avoid filtering overlapping links if they used different navigation areas.

  • Fixed automatically generated navlinks being created without the NavLinkFlag.

• NavMesh:

  • Made a tentative fix for a rare crash in storeWallSegment.

  • Fixed assertions occurring in UE::NavMesh::Private::CalculateMaxTilesCount().

  • Fix FindDistanceToWall returning incorrect result and finding a closest position that is not on a wall.

  • Fixed editor crash when a large number is typed in the Agent Radius value.

• ISMC: Fixed an ensure in UInstancedStaticMeshComponent::GetNavigationBounds() caused by invalid navigation bounds. CachedBounds were being invalidated and not being recomputed when instances were added individually.

• ZoneGraph: Fixed problem with converting FZoneGraphTag::None to FZoneGraphTagMask ().

• Fix for AsyncNavWalkingMode using stale normals.

AI Smart Objects

New:

• Added method to retrieve a Smart Object slot's UserData from the SlotView.

• Added basic MRU slots implementation for MassSmartObject with settings in Mass SmartObject section of the project settings:

  • MRUSlotsMaxCount: Possible values between 0 and 4 (default: 0, meaning that the feature is not used; up to 4 slots).

  • bUseCooldownForMRUSlots: to allow the most recently used slots to be considered again a given period of time.

  • MRUSlotsCooldown: period of time during which a given slot will not be considered after being used.

• Added all camera controls to the SmartObjectEditor toolbar

Bug Fix:

• Fixed a crash in AITask MoveTo

• Fixed an issue where the NavNodeRef was not included when requesting the slot entrance location with the option for projecting to navmesh enabled.

AI State Tree

New:

• Added a rule to remove sustained state. All reselected states are new states.

• Added Blueprint helper 'RunStateTreeRunStateTree' to execute a StateTree on an actor. Helper will use an existing StateTree component or add it if necessary.

• Added Multiply operator to the Consideration score calculation.

• Added ExecutionExtension callback when a transition is about to be applied.

Bug Fix:

• Fixed a Runtime Validation false positive error when changing state trees without running any.

• Fixed a transition that didn't remove the frame when a sub-frame changes root.

• Prevented a reentrant call into StartTree and Tick for StateTreeComponent and GameplayInteractionsContext.

• Fixed temporary frames not cleaned up when we run multiple transitions and did State selection more than once.

• State tree references can now change while the tree is not run.

• Fixed editor freezing when the user spams undo/redo operation inside State Tree Editor.

• State Tree Editor: Hide level actor picker in the state tree editor.

• Fixed property function node value not being retained in new nodes when copied/pasted/duplicated.

• Fixed property bindings not being retained in new nodes if the old bindings were removed before pasting.

• Fixed details view not always syncing correctly with the selected editor node.

• Fixed Delegate Listener being unable to bind to the nested Delegate Dispatcher.

API

New:

• Added DrawDebugCircleArc version accepting a quaternion for orienting the arc with an arbitrary roll.

Bug Fix:

• SlateIM ComboBox now properly shows its selected value when spawned.

Audio

New:

• Waveform Editor:

  • Added a noise threshold for zero crossing logic.

  • Added an inverted S fade function.

  • Streamlined the trimming workflow to have new UI handles and be enabled on opening the waveform editor.

  • Added loop, delete, and conversion options when right clicking.

  • Playback hotkey adjustments to allow move playhead to start

  • Added an icon to fade handles.

  • Made adjustments to default nudge settings.

  • Added controls to scroll left and right when zoomed using the right mouse button.

• Made memory improvements for MetaSounds in the Operator Cache.

• Added a Fade Node in MetaSound Experimental.

• Added Blueprint equality operator for MetaSound literals

• SoundWave Cue Point Origin now has improved defaults. Default origin is now the Waveform Editor Transformation Markers, unless the .wav had cue points on import.

• Added a new Virtualization Mode: Seek Restart. This mode will virtualize, but keep track of playback time and, when realized, seek to that time as if it was playing the whole time. It's a less accurate, but more performant alternative to Play When Silent.

• Performance improvements when using and destroying a large number of Quartz subscribers.

• Metasound Trigger Filter node display name is now Trigger Chance to better convey its meaning. Some of its advanced pins are now hidden by default, and the node & pins tooltips have been made clearer.

• Added "MaintainAudioSync" input to Wave Player Node as an advanced input to the Wave Player MetaSound Node.

  • "MaintainAudioSync" will compensate for latency during playback of streaming wave assets so that the playback of the audio stays in sync within the playing MetaSound.

• Added a new debug display for Audio Modulation: au.Debug.Modulation.ActiveMixes

  • This will display all currently active mixes.you can choose whether Global Control Bus Mixes are included with au.Debug.Modulation.ActiveMixes.ShowGlobalMixes

• Both experimental and legacy subtitle fields are now initialized for DialogueWaves so users can switch between them.

• Added Subharmonizer MetaSound Node to standard library.

• Added an option to only support Vorbis decoding, not encoding, for memory-constrained targets.

• Renamed the "Create Subtitle" Asset Utility action to the more-specific "Make Asset UserData from Legacy Subtitles."

• Improved extendable MetaSound node configuration editor details customization.

• Added two new features to Control Bus Mixes:

  • Control Bus Mix Timer: Set a duration on the Control Bus Mix, and it will disable itself that many seconds after activating.

  • Retrigger on Activate: Optional behavior where, when a mix is activated when it's already active, it sets the values on the CBM to its default values and starts the attack over again (like retriggering an envelope).

• Added a new Asset Action Utility that enables converting Overlay assets into subtitles in bulk.

• MetaSound presets now inherit default metadata (ex. float range/clamp) from parent graph if applicable.

• Subtitles and Closed Captions plugin:

  • Multiple Subtitles can now be added to a single SoundWave. All of them fit inside a single Asset UserData.

  • No longer queues subtitles if the engine settings for subtitles are turned off.

  • Added an Enum to Subtitle Assets to distinguish when the duration property is relevant vs when it stops automatically using a sound's length.

  • Subtitles from now have a default priority of 1.

  • Subtitles created in a SoundWave's Asset UserData will automatically estimate the length of the sound and default their duration thereto.

  • Sequences now support dragging and dropping subtitles.

  • Changed the USubtitleTextBlock class name to USubtitleWidget.

  • Added automatic subtitle playback support for DialogueWaves inside SoundCues.

  • Added a Blueprint node for queuing all the subtitles in an Asset UserData at once.

  • Added a Blueprint function for hot-swapping the Widget.

  • Added StopSubtitlesInAsset BP function.

Bug Fix:

• Waveform Editor:

  • Fixed an issue where selecting a loop region marks the soundwave dirty.

  • Fixed an issue where highlighting and saving with a loop region selected disables the rest of the soundwave playing.

  • Fixed SoundWave markers with incorrect position data on export to USoundWave.

  • Scrubber Undo Fixes

  • Fixed frame length resetting to default instead of min when sliding loop region size.

  • Fixed exported soundwaves not supporting undo transactions.

  • Fixed ensure on undoing loop deletion.

  • Fixed editor crashing when closing out a Sound Wave asset after canceling to Export Waveform.

  • Fixed undo markers triggering ensure

  • Made UI fixes for markers with positive frame length

  • Made fixes to popup clearing.

  • Fixed right click getting stuck when scrolling waveform.

• Subtitles in the Subtitles and Closed Captions plugin with delayed starts now respect internal/external timing choices.

• Subtitles from the Sequencer plugin now correctly update their visibility when scrubbing along PIE.

• Fixed crash with MetaSound user preset widget tab.

• Fixed shutdown crash on Audio Streaming Cache handle ref counting.

• Fixed a bug where, when a submix is deactivated, Modulators attached to it would still be active.

• Fixed a bug where submixes with modulators could not disable via the Auto-Disable setting.

• Fixed an issue with the Seek Restart Virtualization mode where it did not properly account for changes in pitch before virtualization.

  • When the sound virtualizes, it will use the last pitch it was set to to estimate where it should seek upon realization.

• Sound Attenuation: Fixed == operator on FSoundAttenuationSettings.

• Fixed MetaSound relative render cost being incorrectly reported in some cases when using the operator cache.

• Fixed a bug where some Modulation inheritance settings were not working in some cases for non-volume modulation on sound sources.

• Fixed MetaSound comment node positions not saving properly after resizing.

• Fixed a bug where projects with the Audio Modulation plugin disabled had logspam.

• Fixed crashes when using MetaSound node configuration with pages.

• Fixed a MetaSounds edge case when the on-done trigger is triggered mid-buffer.

• Fixed a MetaSound crash when clicking audition menu after closing asset editor

• Fixed a bug where the Chorus Source effect modulation settings did not respond to Modulation changes.

• Fixed Sine Curves on FVolumeFader when used outside [0,1] range. They should now follow the expected curve between any two values.

• Fixed a bug causing various ITD features to have an enormous delay.

Blueprint

New:

• By default the Blueprint editor no longer searches for references to variables when the variables type is changed via the blueprint editor

  • To re-enable this behavior, set "bSearchForReferencesWhenVariableTypeChanged" to true in your editor settings.

• Can now call BlueprintFunctionLibrary functions from classes that do not implement GetWorld or ShowWorldContextPin. It now always shows the pins if needed and will always connect invisible pins even if they are marked as optional.

• Added a SetFocusInViewport node to UScriptableInteractiveTool. This means scriptable tools can give focus to the viewport so that key bindings pass through without user interaction.

• The Blueprint Debug Draw Line / Point / etc. methods now have the option to draw with 'screen' depth priority.

• Added ToRotationVector, MakeFromRotationVector and GetShortestArcWith to the Kismet Math Library.

• Structs tagged as HasNativeMake can now still have their individual members set.

• Asset/Actor Actions in Developer folders show for everyone.

  • GetBlutilityClasses already had code to ensure that we don't list other devs' blutilities.

  • However, it didn't use the correct path format, which caused FPaths::IsUnderDirectory to always return false.

  • Similarly, UEditorUtilitySubsystem::HandleStartupAssets never had a similar filter to begin with.

Bug Fix:

• Fixed failure to copy instanced Blueprint component value overrides on copy/paste workflows.

• CollectionsManagerScriptingSubsystem:

  • Removed a warning from GetAssetsInCollection when an asset could not be found.

  • Fixed an issue where logs displayed as red despite actually being warnings.

• Fixed an editor crash after clicking on a deleted graph node hyperlink in the Blueprint editor's compiler results tab.

• UK2Node_VariableGet::SetPurity erroneously removed the SetPurity function from the public API of UK2Node_VariableGet. This fix now re-adds SetPurity, but changes its implementation to use TogglePurity.

• Fixed an editor crash after clicking on a deleted graph node hyperlink in the Blueprint editor's compiler results tab.

• Fixed a crash when editing children from a cooked Blueprint that had editor-only components.

• User defined structs with Text fields with non-trivial default values no longer alter themselves on load.

• The Blueprint diff tool now reports changes to Create Event Node's signature function.

• Fixed potential for ICH override template namespace collision after reparenting an Actor-based Blueprint.

• The engine no longer crashes when it exits while a search in Blueprints is ongoing.

• Added more crash report context to paths where we are failing to resolve a node's owning Blueprint and/or graph, while using an ensure to avoid crashing the editor as a result.

Blueprint Compiler

Bug Fix:

• Fixed crash in SerializeUnversionedProperties during cooking.

• Fixed crash when cooking blueprints with local object references set to objects in asset.

• Fixed compiler failing to find newly added functions on Blueprint interfaces, which led to implemented functions being renamed.

• Fixed one cause of 'Reachable Garbage' when recompiling Blueprints.

• Blueprint's delegate signature checking logic no longer accidently looks at local variables when matching function signatures.

• Fixed one cause of loss of Blueprint subobjects when a Blueprint that is contained in another Blueprint is compiled.

• Fixed a crash in garbage collection due to mislinked SKEL_ classes, most frequently seen during long-running cook operations.

Blueprint Runtime

Bug Fix:

• Fixed a bug where arrays of structs with custom identical operators could fail to copy from Blueprint generated classes correctly.

• Fixed push-model blueprint array property not properly marked dirty if modified by different actor.

  • The root cause of the issue is due to incorrect function signatures on array function thunks. Several of them mark their input array as 'const', but clearly change the array.

  • When push-model support was added, this problem was discovered and worked around by adding MARK_PROPERTY_DIRTY calls directly in the thunks. The problem with this solution is that it doesn't work when we change an array on a different actor.

  • Additionally, the thunk doesn't have enough information to determine that easily.

  • The correct solution is to leverage the existing code in FKCHandler_CallFunction that has sufficient context to inject MarkPropertyDirtyNode accurately.

  • In order to get array functions working, we needed to fix their signatures to use UPARAM(ref) instead of 'const'. One issue with this fix is that there might be existing Blueprint code that incorrectly uses mutable array functions with read-only data.

  • For now, we'll support this, but with a warning to fix the code as it'll become an error in 5.9. Currently, this warning is disabled until we fix affected content.

• Fixed a memory leak when using containers with types that allocate memory by default.

Gameplay

New:

• Mover:

  • Added a method of canceling movement features by matching gameplay tags.

  • Added User-Defined Struct support for Mover data collections, so Blueprint-only users can include custom data without requiring native code.

  • Now supports spring-based walking mode work in networked play.

  • Reduced potential memory operations when adding to a data collection by preferring to copy onto an existing matching struct if possible.

  • Added options for supporting root motion for non-vertical moves, which makes possible combining them with gravity-based falling.

  • Added a double buffer for cached sync state to avoid issues with reading in data that may be freed/overwritten.

  • Added Mover-Mass translators along with a Mover Integrations plugin to house various integrations between Mover and other systems.

  • NavWalking mode now sets floor results in the Mover Blackboard when projecting to level geometry is enabled.

  • Added an auto-expire policy option for rollback blackboard entries.

  • Added support for blueprintable layered moves through a new system that splits up Layered Move Logic and Data.

    • This allows Layered Move Logic to be made natively and in Blueprints in an effort to expand blueprint support in Mover.

    • These new layered moves exist alongside the old ones at the moment with the intention of these new moves eventually replacing the old ones.

  • Added options for handling out-of-band movement changes, whether to warn about it and whether to accept it as the new starting sim state. Usage is primarily for non-networked play, where an external system is allowed to move the actor around, such as during cinematics or temporary physics simulation.

  • Converted absolute timesteps to double-precision.

  • Now supports avoiding state-copying operations when the simulation state doesn't change.

  • Added AdditiveVelocity MixMode support to MultiJump Layered Move.

  • Made small adjustments to the extended Mover pawn to make sure additive velocity is respected by turning off extra jump input from CharacterMoverComponent Jump.

  • Added option for flat-bottom floor checks.

  • Added consistent angular velocity when changing movement modes.

  • Adjusted mover API to use a FVector for angular velocity instead of a FRotator. This changes some public API related to Mover.

  • Removed the gravity orientation from angular velocity calculation.

  • Added simple montage replication support for the character-focused MoverComponent.

  • Added first version of rollback-aware blackboard.

  • Added experimental option to append inputs into sync state, for cases where you want to share inputs with sim proxies that are not simulated and may not have those inputs available.

  • Made MoveInput and MoveInputType BlueprintReadOnly, so setting this input is done through specific functions only. This means we can properly apply some precision to input to make sure all clients/server have same value after NetSerialization.

• Cameras:

  • Added Blueprint getter nodes for camera rig parameters.

  • Added evaluation context to transition conditions' API.

  • Now shows the name of the camera rig on the rig prefab node.

  • Added more debug information for blend stacks.

  • Added ResolveCameraRigProxy method to Blueprint camera director.

  • Moved lens calibration camera node to the CameraCalibrationCore plugin

  • Some changes to input slots:

    • Now runs input nodes in OnRun. OnUpdateParameters is only meant for pre-blending input parameters, not running actual logic, if only because it is run in isolation on just a few nodes that opt-in.

    • Moved the revert axis options onto the base input slot class.

    • Added a speed option on the input slot class. Pre-blend that instead of pre-blending the actual player input.

    • Moved the user-exposed option for accumulation onto the axis-binding specific node, in preparation of adding an actual accumulation node for more complex input chains.

    • Moved axis-binding code to a helper class in preparation of a "raw" input action node.

  • Added raw input action and accumulator node for complex input chains.

  • Added "driven control rotation" input node:

    • This input node makes possible using a "centralized" player input system which drives control rotation on the pawn, while still enabling cameras to have different orientations, such as when using target preservation with various lateral offsets (and therefore parallax requiring converging cameras with different orientations).

    • The active camera rig uses control rotation as-is, but any blending-out camera rigs use their last control rotation driven by the "delta" control rotation each frame.

    • This seems to be a good compromise between cameras limited by a single orientation and having player input managed by camera rigs individually.

  • Added the GetPlayerController method on the Blueprint camera node evaluator.

  • Added an option on camera components to set control rotation.

  • Added the ability for the Camera Debugger panel to bind to specific camera system instances (for instance, picking which Gameplay Camera actor to debug).

  • When drag-and-dropping a camera or camera rig asset onto a level or a sequence, create the corresponding actor.

  • Camera rig parameters now default to not pre-blended.

    • Defaulting to pre-blended benefited a few cases, but also caused visual bugs in a couple of other cases, so it's not worth turning it on by default.

  • Moved persistent rig activation functions onto the camera components and the camera manager.

    • These Blueprint functions were previously global, affecting whatever camera system host was currently considered "active".

    • This turns out to be unclear and prone to errors. Now the user activates persistent rigs exactly on whatever they intend to.

  • Now auto-create camera rigs and assets when nothing is specified on a Gameplay Camera component (but log a warning).

  • Made the orientation initialization service available to 3rd parties, and added an API for overriding the target or yaw/pitch to preserve.

  • Added a Blueprint utility function to access the evaluated camera's orientation.

    • Added Teardown API for node evaluators, added layer and active camera rig information.

    • Made node evaluator and evaluation service flags inclusive by default (i.e. opt-out).

    • Added a new "initialize with ideal framing" option on screen-space framing nodes.

  • Added a "family shortcut" bar to various camera asset editors for helping navigate between related assets.

  • Users can now set variables to be pre-blended.

  • Made QoL improvements to the Blueprint camera node.

  • Added bone/socket options to the attach to player pawn node.

  • Improved advanced camera shakes (add shake instance IDs and the ability to interrupt and stop a shake), improved the internal API for implementing shake nodes, and fixed a few bugs.

  • Implemented a more proper auto-build for camera assets for PIE.

• GAS:

  • Improved logging for missing attributes in FActiveGameplayEffectHandle when using GetGameplayEffectMagnitude.

  • Gameplay Tag display ends in an ellipsis when the display is cut off rather than overflowing.

  • Gameplay Tag and Tag Container meta data "DisplayShortTagNames" will now remove the Categories filter from the beginning of the Tag chip in the details panel.

  • Gameplay Effects stacking options now have better names and comments.

  • CooldownGameplayEffectClass validation: When a GameplayAbility is configured with a cooldown GE class, validation will check whether that GE applies any tags.

  • Updated the GameplayTagCountContainer to serialize tags itself and provide for fine control of what tags should replicate where via EGameplayTagReplicationState enum.

  • Exposing common GameplayEffectSpecHandle and ActiveGameplayEffectHandle queries to Blueprint. The following Blueprint callable functions have been added to AbilitySystemBlueprintLibrary to empower Blueprint programmers when making GameplayAbilities. Since some GameplayAbilityTask callbacks only provide a GE spec handle and/or active GE handle, now you can do more with those handles:

    • GetGrantedTags: Gets gameplay tags granted by a Gameplay Effect, from the effect's spec handle.

    • GetAssetTags: Gets gameplay tags describing the GameplayEffect, from the effect's spec handle.

    • GetGameplayEffectFromSpecHandleIsDurationGameplayEffectSpecHandle: Whether a GameplayEffect is instant or non-instant.

    • IsActiveGameplayEffectHandleValid: Whether a handle for an active GameplayEffect is a valid handle or not. Applied instant GEs don't result in an active handle.

    • IsActiveGameplayEffectHandleActive: Whether a handle for an active GameplayEffect is a valid handle and it's still applied.

    • GetAbilitySystemComponentFromActiveGameplayEffectHandle: Retrieving the AbilitySystemComponent from an active GE handle.

  • Renaming a gameplay tag in the Gameplay Tag Manager now automatically renames all sub tags.

  • Added predictive gameplay effect stacking and improved stack overflow handling.

• The data validation error for when there is a null input trigger on a key mapping now includes the name of the input action which it is mapped to.

• You can now call "SetShouldConsume" on any Enhanced Input bound action handles.

  • You can also define "ENHANCED_INPUT_ALLOW_LEGACY_BINDING" in your game's .build.cs file to enable legacy key bindings onto enhanced input components, making upgrading to enhanced input easier.

• Added GetActorFilter UPROPERTY meta support to object picker (mirroring GetAssetFilter).

• Added a virtual function to UBlueprint, ShouldAutomaticallyRegisterInputOnConstruction, which can be overridden in widget blueprints.

• Added a set of deprecated input action/axis names in the project settings.

• Added "Setter=SetShowMouseCursor" to APlayerController::bShowMouseCursor.

• Added ReleaseGameFeaturePlugins for multiple plugins at once. Unloading plugins batches GC and GameplayTags tree changes together which improves performance of unloading operation

• Added an editor preference for setting a "Simulated Device Mapping Policy".

  • This can be used in the editor to change how input devices get mapped to platform users, which can be useful for testing device connection sequences for your UI, log in flows, etc.

  • Added the current device mapping policy to the output of the "Input.LogAllConnectedDevices" command.

• Added helper functions to Ability system library: HasAnyAbilitiesWithCondition and HasAnyAbilitiesWithAssetTag

• Added QueueWorkFunction and SendQueuedWork to the TaskSyncManager which can be used to queue a batch of function pointers to execute as a simple tick task. This can be used with RegisterTickGroupWorkHandle to safely schedule batched gameplay thread work from any worker thread.

• Calling GetDeviceSpecificData now uses the given input device ID. If that is invalid, it uses the platform user's most recent device.

• Added LoadGameIfExistsAsync to SaveGameSystem which combines the exists and load checks into one async call to avoid an extra frame delay. Changed GameplayStatics to use this for async loads which fixes a warning when trying to load a nonexistent save game.

• Added ensure and comments to prevent creation of registered FTickableGameObjects on worker threads which is an unsafe race condition.

• Added an option to the FTickableGameObject constructor to enable creating with a disabled tick, which is safe on a worker thread.

• Added bindable "virtual" accept and back FKeys.

• Added a OnPostUserSettingsInitialized delegate to Enhanced Input, which will fire after the Enhanced Input User Settings have been initialized on the subsystem.

• Added more ways to detect a local player subsystem when using the node which does not have an explicit player controller target pin.

• Implemented SlideAlongNavMesh option for CMC NavWalking mode. This means pawns in NavWalking mode can move along a navmesh rather than just moving towards a projected point on the navmesh.

• CineCamera: Added an option to disable dynamic exposure.

  • Previously, turning off depth-of-field with FocusMethod would also turn off exposure simulation. This was fixed recently, but also meant that CineCameraComponent would now always simulate exposure, which isn't always desirable.

  • This change adds a new ExposureMethod setting to allow disabling exposure too.

• Made sure that the key mappings "supported key profile" tag is respected, and made the OnKeyProfileChanged delegate Blueprint assignable.

• Fixed a race condition crash on shutdown of the SteamController plugin.

• Added an "Input.LogAllConnectedDevices" command to dump all the currently connected input devices and some metadata about them to the logs.

• Reduced mouse input overhead on Windows by processing raw mouse moves on a separate FRunnable thread in the WindowsApplication..

• GameplayTags and GameplayTagContainers created in Blueprint give the user a way to edit the "Categories" metadata for tag filtering in the owning Blueprint.

• Fixed a crash where UPlayerInput::SmoothMouse would assert before it would attempt to divide by zero.

Bug Fix:

• Mover:

  • Fixed a bug in mover angular velocity clamping where the limit was not respected when rotating off axis

  • Added CommonLegacyMovementSettings shared settings in various movement modes to avoid a crash that could happen if they were the only mode added.

  • Fixed an issue where pawns wouldn't follow a navlink off the navmesh if bSlideAlongNavMeshEdge was true.

  • Nav walking modes now force a navmesh projection if something comes along and invalidates our last floor information, such as teleportation.

  • Now initialize the Mover mode state machine earlier so it can be used in backend initialization if desired

  • Fixed NaN issue in UMovementUtils::ComputeVelocity that could happen when MoveDirectionIntent was zeroed out.

  • Fixed issue where backends could leave stale non-persistent structs in sync state between frames.

  • Fixed several cases where strict equality checks on orientations could fail due to float point imprecision.

  • Fixed an issue where a specified InputProducer could fail to have ProduceInput called on it.

  • Fixed a Blueprint editor crash during validation if there's a shared settings object set to None.

  • Fixed issues with trying to maintain the small distance off of floors in falling/flying modes where a character could get pulled towards the floor.

  • Fixed improperly calculated angular velocity for mutli-axis rotation cases, and added utility function to compute it.

  • Fixed a bug in standalone mode where the time step was being rounded down to the nearest whole millisecond.

  • Fixed floating point precision error in mover's fixed delta time calculation.

  • Finding a movement modifier by handle and by type now searches through the queued modifiers on the Mover State Machine as well. Fixes an issue where modifiers weren't found immediately after queuing them.

  • Fixed local->world root motion conversions when non-yaw rotations are involved.

  • Fixed cases where some movement modes were not respecting the setting for remaining vertical.

  • Fixed bugs where an actor can violate the min/max distance it's supposed to float above walkable floors.

  • Made sure we use BaseVisualComponentTransform to update PrimaryVisualComponent transform in FinalizeFrame so changes to BaseVisualComponentTransform apply to the visual component regardless of whether we're smoothing state or not.

  • Now properly expose Movement Mode in-out references in GenerateMove and SimulationTick to Blueprint.

  • Searching modifiers by handle with an invalid handle will return nullptr rather than active modifiers with invalid handles that haven't been fixed up yet.

  • Now passing along starting velocity in Falling modes if we didn't use any time. This fixes some velocity cancellation that sometimes causes a stutter on landing.

• Cameras:

  • Fixed main camera assets not being usable as Blueprint variables.

  • Fixed crashes and bugs with rewind debugger integration.

  • Improve debug info display with extra data, more filtering options, and a few other things.

  • Fixed single-rig updates missing some of the steps the blend stack does.

  • Fixed static initialization problems that can lead to debug blocks not saving their fields in trace files.

  • No longer freezes camera rigs during stateless evaluations.

  • No longer warns about a camera asset not using any rigs if it's using proxies, and builds any rigs in the proxy table.

  • Fixed a crash when a camera's enter or exit transitions have empty pins.

  • Fixed an incorrect reset-to-default behavior on the camera parameter editor UI.

  • Now prevents infinite recursion when there's a cyclic reference of camera rigs.

  • Fixed gameplay tag transition condition; when a tag query is specified, it should fail if there is no previous/next camera rig.

  • Normalized yaw/pitch for spline orbit node

  • Can now run the target ray-cast node when there's no player controller.

  • Can now build and run camera rigs and shakes with no root node.

  • Now prevent rig prefab nodes referencing their own camera rig.

  • No longer throws asserts or error messages when we have a camera actor without an asset specified on it

  • Fixed activating persistent rigs during director initialization, and having these rigs receive custom parameter overrides.

  • Now validates that exposed camera rig parameters have the correct type for what they're connected to.

  • Fixed possible crash in GPC camera manager when the last evaluation context is removed from the stack.

  • No longer updates dampers and interpolators when the delta-time is zero.

  • Now properly freeze blends (possibly mid-blending) when freezing a camera rig in a blend stack.

  • Fixed simple fixed-time blends not saving/restoring their current time.

  • Fixed a crash when changing the type of a camera rig parameter.

  • No longer shows byte/int types for data parameters.

  • Now resolves camera rig name conflicts when building the property bag for a camera asset.

  • Fixed camera rig parameter nodes not being added to the list of graph objects.

  • Fixed assert when adding an enum data parameter to a camera rig.

  • Fixed broken "inline" evaluation of camera shake prefabs.

  • No longer pre-blends camera variable table entries that are not flagged for it.

  • Fixed the tick group for the camera components.

  • Fixed a crash when running editor builds without an editor.

  • Added missing initialization call for blend nodes in merged camera rigs.

  • The camera reference widget is now disabled if overridden with a rig parameter.

  • Fixed a crash when connecting a camera variable reference to a camera rig parameter.

  • Fixed an issue where rigs could keep running with old data after their asset was rebuilt.

  • Fixed "Home" button in camera rig editor.

  • Deleted references to camera variables when a variable collection is deleted.

  • Fixed a possible crash when running with unbuilt or outdated rigs.

  • Fixed Blueprint breakpoints not working on GET/SET parameter nodes.

  • Fixed shake prefab node not passing shake parameter values over to the visual layer in deferred mode.

  • Fixed SET parameters nodes not setting anything if the parameter wasn't already known in the variable/data tables.

  • Fixed error messages for unexpected situations lerping/overriding variable tables.

  • Fixed variable and context data tables sometimes returning uninitialized memory, and replace assert with one-time warning.

  • No longer uses manual focus distance on the output camera component if the focus distance isn't set.

  • Fixed pin types and colors for some data parameters.

  • Fixed incorrect parameter/pin types on the Blueprint camera node for object and class pointers.

  • Camera modifier rigs added from the player camera manager should now be aware of the player controller.

  • Added fixes for the player camera manager:

    • No longer double-updates Gameplay Camera actors

    • Now run the vanilla (Blueprint-based) camera modifiers ourselves after the camera system.

    • Now sets the transform of the camera manager itself to where the final viewpoint is.

• GAS:

  • Consolidated code that checks whether an AttributeSet's FProperty represents a gameplay attribute, and improved coverage and stability:

    • FGameplayAttribute details customization dropdown will only show attribute set properties that represent GameplayAttributes. Previously it showed all properties.

    • GameplayDebugger will now also display doubles. Doubles as FGameplayAttributes remain supported for legacy reasons.

    • Fixed GameplayDebugger crash when an UAttributeSet had any int32 UPROPERTY().UAttributeSet::InitFromMetaDataTable now only processes property types that can back gameplay attributes.

  • Fixed a crash when debugging gameplay effects with aggregate by source stacks.

  • Fixed an issue where SetTagMapCount didn't call OnTagUpdated like the other tag update functions. This will now be called when Gameplay Cue tags and Loose Tags are added and removed (No change for changing values that don't add or remove the tag).

  • Fixed target data recalculating source tags and attributes when applying Effect Spec.

  • GameInstance pointer for Async Actions is correctly reset after it is un-registered.

• Network Prediction: Changed static initialization of FNetworkPredictionModelDefRegistry's singleton to avoid issues with static initialization happening out of order causing registered Network Prediction model definitions to be skipped/removed. Also, made some minor adjustments to FNetworkPredictionModelDefRegistry::FinalizeTypes to avoid potential ODR issues.

• Fixed an error in ULocalPlayerSaveGame::IsSaveInProgress where it always returned true even if one was not in progress.

• Added an ensure to protect against missing player state crashes during seamless travel.

• Map placed actor Event Dispatcher duplicates:

  • A map placed Blueprint actor's bindings to another map placed actor's multicast delegates (including Event Dispatchers) are now cleaned up when the actor is destroyed and reinstanced.

  • This fixes a bug that bindings to other actors' multicast delegates accumulate when recompiling an actor blueprint. Previously this resulted in event nodes firing multiple times, increasingly when the Blueprint is recompiled.

• Now return the playercontroller if found from the owner.

• Network Prediction: fixed crash in smoothing service that could occur after adding more simulation objects during runtime

• Fixed replication issue canceling Gameplay Abilities when destroying the ASC from the server while abilities are active.

• Fixed Multiply (Compound) modifiers not calculating correctly with stacked GameplayEffects.

• Prevented a crash in APlayerCameraManager when the owning player controller has been GC'ed.

• Input triggers and modifiers will now properly respect the priority of an input mapping context. This fixes a bug where if you had the same input modifier class on an input mapping context of a different priority, it would always use the modifier values of the one which was pushed to the stack first.

• Fixed code that removes ?listen from client URLs to work correctly with # options as well.

• Ensured that the "SlateApp.GetModifierKeys" function will return the correct values when called on platforms using GameInput to process keyboards.

• Fixed OnBlendComplete not being broadcast in Standalone (non-networked) games.

• Find-in-Blueprints: When a BP member variable is a struct, its members' default values are now searched and returned as results. Map keys are not supported yet.

• Chaos Mover: Fixed floating point precision error in ChaosMoverStateMachines's fixed delta time calculation.

• No longer restarts a camera animation blend out when reaching the blend out time if we were already stopping.

• Fixed DefaultToInstanced subobjects breaking on blueprint duplication.

  • Fixed instanced subobjects, including DefaultToInstanced classes and UPROPERTY(Instanced), breaking when a blueprint class with instanced subobjects got duplicated.

  • This fixes the following editor actions which previously resulted in data loss:

    • Duplicating blueprints with user defined instanced subobjects.

    • Duplicating blueprints with GAS attribute set DefaultSubobjects.

• Player Input: Fixed a bug where if you had an input component whose outer was a subobject of the currently controlled pawn, the input component would be processed twice.

  • One example where this could be a common issue is within the "Modular Gameplay Framework". Users would add a UInputComponent to some UActorComponent, and then call "PushInputComponent" on the owning player controller. This would result in the UInputComponent being processed twice.

  • This would happen because in "APlayerController::BuildInputStack" it calls "GetComponents" on the controlled pawn, which would return the UInputComponent which had already been pushed to the controller's input stack, thus adding it twice to the stack for processing.

• Enhanced Input: Do not load platform-specific override data on post load of the platform settings. If you are referencing an object that is in a plugin, this will just fail anyway and does not improve any sort of loading behavior.

• Fixed an incorrect Deleter being used on FGameplayAbilityTargetData when calling FilterTargetData, and exposed FGameplayAbilityTargetDataDeleter for this purpose.

  • Use this deleter when creating an FGameplayAbilityTargetData using FMalloc, such as in UAbilitySystemBlueprintLibrary::FilterTargetData.

  • When creating TSharedPtr to FGameplayAbilityTargetData which was created with FMemory::Malloc, please use the FGameplayAbilityTargetDataDeleter

Deprecated:

• Deprecated the "Speech Mappings". These speech mappings were originally added to support Hololens, which is no longer a supported platform and can be removed.

• Removed the deprecated functions on the camera manager, GetCameraCachePOV and GetLastFrameCameraCachePOV.

• GAS: Deprecated StackType to make it private in the future, use new accessors instead.

Mass

New:

• Added time-slicing with FMassEntityQuery::FExecutionLimiter to limit execution to a set entity count.

• Added a Mass command for grouping entities.

• Mass Debugger:

  • Added "Open In Query Editor" button to all query displays in the debugger.

  • Added handle-based sorting of entities on the Entities tab.

  • Completely overhauled breakpoints with new types, filtering, hit counters, session to session persistence, copy-paste.

  • Added query editor UI with load/save and copy/paste support for authored queries.

  • Added Fragments view tab.

  • Added new "Selected Entity" breakpoint filter to break for whichever entity is selected in the gameplay debugger or debug UI.

• FMassFragmentRequirements and FMassEntityQuery are no longer UStructs, which they were never supposed to be.

• Added observers locking to commands flushing. This change results in batching observers calls, significantly reducing the number of individual observers executions (~20 times in CitySample).

• Added MassQueryExecutor to unify the functions of MassQuery and MassProcessor and create a foundation to remove dependency on UObjects for Mass processing in the future.

  • Simplified Mass data access with templated UE::Mass:FAccessors collection.

• Added a way to fetch base-typed fragment views from Execution context while providing the actual, specific class with a UScriptStruct pointer.

• CFragment concept now checks whether types are std::is_trivially_copyable and if not emits errors requiring users to manually mark fragment types that are not trivially copyable.

  • The goal is to educate fragment creators about good practices and point out fragments that might accidentally violate the requirement.

• Deprecated FMassBatchedCommand::Execute as a const function and introduced non-const replacement named `Run`.

  • Unfortunately a new name had to be introduced since the constness of the function is the only thing that's changing.

  • Added a temporary construct to MassCommandBuffer to statically detect commands that still implement the deprecated virtual Execute in an attempt to make it easier for people updating their code to notice the change.

  • The construct will check at compile time all the pushed commands of known types and statically assert if the command type still overrides the deprecated `Execute` function.

• Entity Builder API extension, supporting use of an arbitrary "element" type and having the builder figure out what kind of an element that is and store it appropriately. Additional changes:

  • Fixed FEntityBuilder::AddInternal implementation to not add duplicated instances of a given element type if one is already present.

  • Added creation context to the deferred path, to ensure the fragment values are already set when the observers kick in. This was already done in the synchronous path, so this change addresses the inconsistency

• Added a couple of functions to MassEntityManager, that deal with types passed in as UScriptStruct, and pass the argument to the appropriate function, based on the type (Tag or Fragment).

• Mass Command Buffer API extension:

  • PushUniqueCommand: the function lets callers add a hand-crafted command. Use it to push commands that you don't want to get merged with other commands of the same type.

  • AddTag and RemoveTag: added versions that take an array view of entity handles.

  • DestroyEntities: Added a version with rvalue ref parameter.

• Added FMassFragmentRequirements::AddElementRequirement that can be called at runtime with UScriptStruct.

  • It will add the provided type to Fragment or Tag bitsets, depending on the type represented.

• Added FMassRepresentationParameters::Identical to implement logically-correct FMassRepresentationParameters instances comparison. The operation by design ignores CachedDefaultRepresentationType and CachedRepresentationActorManagement.

• Added a way to ask a MassCommandBuffer about its host thread.

• UMassVisualizationTrait can now be configured to not check mesh descriptions for validity which can be used to procedurally populate trait instances.

Bug Fix:

• Fixed inconsistencies between single and multi-threaded deferred command flushing in FMassProcessingPhase::ExecuteTick.

• Modified the occasionally failing ensure condition in UInstancedActorsData::OnInstancedActorDestroyed and provided it with more comments and a message to emit.

• Properly handle shared fragment hash collisions.

• Mass puppet actors now get destroyed immediately when the puppet is destroyed.

• Fixed configuration issues of FMassProcessingContext created in UMassSpawnerSubsystem::DoSpawning for running initializer processors.

  • The original configuration was flushing commands if any have been issued, but did so in a way that forced flushing of all the system's commands accumulated up until that point. That resulted in different behavior in entity spawning depending on whether there were initializers for a given entity available or not.

  • The new configuration results in keeping the behavior consistent, regardless of initializers presence, which is to not flush commands and if any are issued they will be appended to the main buffer when FMassProcessingContext goes out of scope.

• MassGameplay:

  • Fixed a crash when a mass representation actor is destroyed while mass simulation is active.

  • Fixed a teardown crash in MassAgentComponent.

  • Fixed a situational crash in UMassRepresentationSubsystem on world teardown.

• MassAgentComponent changes to update EntityHandle-to-actor mapping in MassActorSubsystem when dealing with a player-owned component.

  • The change fixes an issue with GameplayDebugger's Mass category not being able to display info on the player-owned entity. A tiny change to the category removes the friction when doing that (no longer requiring the transform fragment to display data).

• Fixed an issue in FMassEntityQuery::ParallelForEachEntityChunk stemming from the code not taking into consideration that ParallelForEach's workers can be moved between threads.

  • If that happened and the query was run with `bAllowParallelCommands == true`, then the command buffer would complain about being used outside of the thread of its creation. The fix is updating the thread ID of the command buffer whenever it's picked up.

• Now sorting observer processors to utilize UMassProcessor.ExecutionPriority.

• Fixed FarmTest to not crash on PIE:

  • The existing implementation is crashing since the changes to processor initialization have not been applied there.

  • This issue is limited to the farm-test, due to the custom and legacy way of setting up and running processors.

• Fixed standalone-game IA uses by properly talking to ServerInstancedActorsSpawnerSubsystem, which fixes some IA representation issues.

  • Also, ServerInstancedActorsSpawnerSubsystem has been fixed to `FinishSpawning` actors only once their IAComponent has been configured.

• Marked UMassCapsuleTransformToMassTranslator as "game-thread only" to avoid data races when the observed component is modified in game thread as the data is being accessed by the processor.

Networking

New:

• Implemented RPC state stomp detection which can detect state buffer writes between quantization and serialization. The cvar to control this is net.Iris.RPC.ServerStompDetectionEnabled which is false by default.

• Support Iris when using NMT_JoinNoPawn and NMT_JoinNoPawnSplit.

• Adding an FSocket::ReleaseNativeSocket for use with native socket API's (e.g. asio). Using this new function inside the TraceAnalysis' FDirectSocketStream to support cases where we want multiple connections, not just a single connection (e.g. a multi-server capture).

• Iris

  • Implemented seamless travel support. If seamless travel support is not needed for a project the cvar net.Iris.AlwaysCreateLevelFilteringGroupsForPersistentLevels can be set to false to avoid unnecessary overhead of filtering objects in the persistent level.

  • Optimized polling to only poll objects/properties that are marked dirty.

  • Added some async loading failure debugging cvars:

    • net.Iris.AsyncLoading.FailPackageName Name: fails async loading all packages containing the package name.

    • net.Iris.AsyncLoading.FailNextLoad 1: fails the next async load regardless of the name and resets the cvar.

    • net.Iris.AsyncLoading.FailAllLoads 1: fails all loads until the cvar is set to 0.

  • Gracefully handle reaching the end of the bitstream even if it's unexpected. The behavior is controlled via cvar net.Iris.ReplicationReader.GracefullyHandleReachingEndOfBitstream.

  • Added better logging when handling end of bitstream issues. Reset the read journal when deserializing huge objects.

• Added a NetDriver command for printing out all of the actors registered for replication (generic replication system only).

• NetEmulation:

  • Added netEmulation setting to simulate buffer bloat on game traffic.

  • Set PktBufferBloatInMS for outgoing packets and PktIncomingBufferBloatInMS for incoming packets.

    • Ex: 'netEmulatation.PktBufferBloatInMS 1000' will apply 1sec of buffer bloat on outgoing traffic.

  • netEmulation.BufferBloatCooldownTimeInMS can also be used to set a cooldown period between each buffer bloat occurence.

    • Ex: 'netEmulation.BufferBloatCooldownTimeInMS 2000' means buffer bloat is not applied for 2secs after a buffer flush.

  • Added a "BufferBloat" emulation profile that enables buffer bloat of 400ms (in and out) over an 'average' emulation profile.

• Added metrics to measure the performance and behavior of the multiserver proxy.

• Multithreaded Iris Polling Step:

  • FObjectPoller can now kick off multiple FReplicationPollTasks, each of which processes a subset of the ObjectsConsideredForPolling array.

  • This is set to process cache line sized Chunks in an interleaved pattern so that each task gets a roughly balanced amount of work, and we avoid false sharing the same cache line.

  • Also supports the ForcePoll flow if PushModel is disabled.

  • Added NetBitArray ForAllSetBitsInRange function to facilitate iterating over different parts of the same Array inside each task.

  • FNetTypeStats now supports threaded access through the use of ChildNetStatsContexts that are used during parallel phases and then accumulated into the parent context at the end of a frame.

  • Configuration is done at the ReplicationSystem level so that we can enable it just for GameNetDriver on the Server.

  • We define a flag called bIsInParallelPhase which is true whilst the FReplicationPollTasks are running, and is used to protect against non-thread-safe access during this time.

  • Added capability for Networking Iris Polling phase to be run in parallel. This can be enabled by adding bAllowParallelTasks=true to the ReplicationSystemConfig

• MultiServer:

  • Refactored LaunchMultiServer script. Users can now derive from it to add their own features.

  • The -ProxyGameServers command-line argument can now accept a port range. This helps with launching multiple servers on a single host, so you can just use 127.0.0.1:9001-9025 for 25 servers.

• RemoteObjects: Now reschedules aborted ServerReplicateActor calls rather than retrying them.

• Fixed an issue where UActorChannel::ReplicateActor did not account written bits in one of the paths

• Renamed RepNotifies CSV stat to Generic_RepNotifies to better distinguish between Actor Channel based replication (generic) and Iris replication.

• Added support for closing child connections in the net driver and closing connections on the multiserver proxy.

• Added mutators to UNetworkMetricsDatabase functionality.

  • Mutators can be added to UNetworkMetricsBaseListener and get a chance to process input metrics every frame. They report an output metric to their owning listener on the listener's reporting interval.

  • Use mutators to aggregate metrics that are set more frequently than a listener's reporting interval. Basic mutators for min, max, and average are provided.

  • Added server-side network metrics for RawPing values across all client connections.

• Added support for actor replication relevancy when using the multiserver proxy.

• The multiserver proxy now shares a single NetGUID cache and objects are cached on the proxy when migrating between servers.

Bug Fix:

• Fixed a crash which could occur if an actor channel was removed during replay playback scrubbing.

• Iris:

  • Fixed bug with FastArraySerialzierFragment if using not replicating items.

  • Fixed bug where FGameplayAbilityTargetingLocationInfoNetSerializer would not properly call FreeDynamicState.

  • Fixed bug that could prevent a default subobject from receiving a large RPC.

  • Fix edge case with prioritization causing a crash.

  • Fixed issue where dirty status of new subobjects created from PreUpdate of objects was masked out.

  • Now resets NetBitStreamReader between batches to get correct read journal entries and clear overflow status.

  • ObjectProperty class type is now validated property when serializing object references.

  • Fixed a bug where initial state was not applied when beginplay() was dispatched for world from AGameStateBase::OnRep_ReplicatedHasBegunPlay.

  • Fixed a bug that allowed adding subobjects to torn off root objects.

  • FScriptInterfaceNetSerializer can now handle blueprint implemented interfaces.

  • The ObjectReplicationBridge's AddDependentObject method will now prevent circular dependencies.

  • Fixed bitstream corruption that could lead to disconnects.

• Can now pass zero size to FNetBitStreamWriter's InitBytes method.

• Network:

  • Added UE_FAST_ARRAY_COMPILE_LOG_LEVEL that enables a program to control the compile time verbosity of LogNetFastTArray logs.

  • Since this class is templated the logs in the functions are unique per implemented class so it can grow the amount of the log static strings if they are left compiled-in.

• Fixed issue with FObjectReplicator's CanSkipUpdate with net.PushModelSkipUndirtiedReplication enabled.

• Made a change in UNetDriver::IsLevelInitializedForActor to avoid iterating over net connections if the actor we are evaluating has the correct world, or if the actor it is not a player controller

• NetDriver:

  • Fixed ping updates discarding higher ping values when multiple Acks were received in one packet.

  • For example this caused ping values to stay low during BufferFloat occurrences.

  • Added RawPing metric that tracks the highest ping value received every frame.

  • RawPing will not change if no packets are received or the incoming packets contain no new Acks.

• When using Iris replication, objects that have a spatial filter set at runtime will now always use their correct location for filtering calculations.

• When using Iris replication, actors and subclasses without explicit FilterConfig overrides in ObjectReplicationBridgeConfig will now be filtered based on their relevancy flags like bAlwaysRelevant.

  • Previously these actors were treated as always relevant regardless of their bAlwaysRelevant flag.

Deprecated:

• Removed error prone SetConnectionFilter API from UReplicationSystem. Use exclusion groups instead.

• Deleted UNopNetObjectFilter. It's been superseded by UAlwaysRelevantNetObjectFilter which has identical functionality.

• Deprecated GetSubobjectsWithStableNamesForNetworking function

Level Design and Art Tools

Geometry Core

New:

• We now use the fast cluster simplifier for convex decomposition's pre-pass simplifier (since the main use case is to make the decomposition faster).

• Geometry Core: Added morph target attribute as a core dynamic mesh vertex attribute.

• Added path intersection & difference.

• Added a ReparameterizedCloserToWorldFrame to the GeometryCore TOrientedBox3 class.

• Added a CreatePerVertex method to dynamic mesh overlays, as a faster alternative to the CreateFromPredicate() method in the per-vertex case.

• Added a vertex -> single triangle method to dynamic mesh, as a faster/more-convenient path (vs e.g. using a vertex->triangles iterator to get a single element).

• FDynamicMesh3 queries now optionally take an inline-allocated array for local vertex-neighborhood mesh queries.

• Added optional scale factor to DynamicMeshUVEditor::ScaleUVAreaTo3DArea utility function.

• Added option for geometrycore's MeshBoolean to report the source mesh of each result triangle.

• Added option for the Mesh Boolean to take a custom 'inside mesh' function, per mesh.

• [GeometryCore] Delaunay 2D iterative update support.

• Added a version of Expand() to FAxisAlignedBox3 and FAxisAlignedBox2 that takes a vector.

• Segment Tree: - add option to build the tree with an array of segments - make use of the filter function that's passed in as an option.

Bug Fix:

• We now reset the UsedCount on a moved-from RefCountVector, so it is left in a valid state (and e.g. a mesh will not fail CheckValidity after being moved from).

• Made the implicit morphology generator not hit an ensure() when passed an empty mesh (and still return an empty result).

• Fixed the dynamic mesh color transfer method handling of non-compact meshes when biasing element positions, and simplified the lerp-toward-centroid logic used.

• Fixed static mesh's LOD -> dynamic mesh conversion handling of non-compact polygon group IDs

  • We need to compact these IDs so that they correspond to static mesh section indices, which all our tools and geometry script processing expect.

• Improved performance of MeshRegionGraph operations:

  • Region merging transfers known neighbor information, rather than recomputing it.

  • Less redundant validation on internal operations.

  • Less redundant array searching when building neighbors.

• Added api exports to the OBJMeshUtil methods so they can be called from other modules.

• Made MeshConvexHull's grid sampler exit when mesh bounds are empty, to avoid ensures on grid w/ zero cell size.

• Fixed dynamic mesh CompactInPlace creating a triple-sized TriangleEdges array + add coverage for this case in CheckValidity, and guard against this kind of error breaking AppendWithOffsets.

• We now do not leave unused vertices in the cluster simplifier mesh result mesh.

• Fixed incorrect transforms on GeometryCollectionToDynamicMesh converter, and added more comments to document the expected coordinate spaces for these meshes.

• Fixed crash in implicit morphology offset operation due to offset grid dimensions overflowing int32.

• Fixed a possible crash in algorithms that use the sparse solver wrapper, by properly handling failed factorizations.

Geometry Script

New:

• Added various oriented box functions to geometry script, to create and query / test intersections and convert to meshes.

• Added an OBB containment function to geometry script (matching what simple collision fitting does, but exposing the found oriented box directly).

• Improved geometry script's CopyCollisionMeshesFromObject support for complex collision.

  • It now supports any type that implements the IInterface_CollisionDataProvider interface, and specifically should now work better with Skeletal Mesh Components and Spline Mesh Components.

• Added a 'select occluded from outside view' jacketing method to geometry script, to have more controllable occlusion operations (e.g. from specific directions, for specific material IDs/parts of mesh, w/ transparent tris).

  • Also, cleaned up the detect exterior visibility function logic to support the new options and be a bit faster / more robust.

• Added target edge length QEM and cluster-based simplification methods in geometry script.

• We now more consistently use the term "Connected Islands" instead of "Components" when referring to connected pieces of a mesh in Geometry Script nodes.

• Filled out geometry script list conversion extract/set methods for the various list types: Scalar, UV, Vector and Color.

• FOrientedBox is now exposed to Blueprint.

• The 'debug' pins in geometry script are now hidden in the Blueprint graph

• Geometry script now supports standard MikkT tangents in the Compute Tangents node, on platforms where the MikkT library has been compiled (i.e., win/mac/linux).

Bug Fix:

• Added Vertex and Triangle ID validation to geometry script Mesh Query methods so users do not crash on querying an invalid element ID.

• Made dynamic mesh pools safer to use from a non-game thread.

• Fixed the output param display name for GetMaxMaterialID.

• In geometry script asset creation methods, we now test that the paths for new assets are valid before attempting to use them.

• Fixed a bug with "AppendXWithSimpleCollision" geometry script methods where repeated calls of a script could accumulate extra copies of the collision shape, because blueprint re-uses output reference objects across script invocations.

• Removed requirement that patch unwrap mesh be non-compact.

• Fixed issue where Geometry Script would maximally simplify a mesh if "Simplify to Tolerance" was run with a tolerance of 0.

• Deprecated incorrect geometry script perlin noise node, and added a corrected v2.

Landscape

New:

• No longer visualizes disabled landscape patches.

• Now sorts landscapes alphabetically when multiple landscape actors are editable in landscape mode.

• Changed the landscape Collapse Layer tool to use selective render weightmaps code instead of intermediate render code.

  • Added weightmap support for edit layer selective renders.

• Added a GrassMap RenderEveryFrame command, to debug grass map runtime generation.

• Changed landscape tools with the "Combined Layers Operation" feature to use new selective layer render code.

  • Stops using old "intermediate render" code and avoids polluting the persistent texture data with intermediate results. The new version is faster and safer.

• Moved the Landscape feature level warning (for shader modes < SM5) from a blocking notification to a simple console log.

• Landscape optimization for the editor:

  • No longer inspects materials for finding mobile layer names when generating mobile weightmap allocations while there's no weightmap allocations in a given landscape component in the first place.

• Performance optimization when undoing landscape edits.

• Added a transient landscape property to track the last selected edit layer index. Edit layer selection state is persistent when toggling between editor modes.

• Removed the ability to place Landscape Blueprint brushes from the Place Actors panel.

• Added all landscape brushes from the Landscape Manage - Blueprint Brush tool.

• Enabled dynamic Landscape Spline control point billboard size and offset in editor.

  • To change the offset and size, configure Spline Icon World ZOffset and Spline Icon Scale under the Landscape Project settings.

  • To maintain legacy spline behavior, set CVarLandscapeSplineEnableFixedSpriteIcons=True.

• Removed the Landscape Spline Deform to Landscape buttons used to update spline data for non-edit layer landscapes. With edit layer landscapes, Landscape splines automatically affect the data when a Spline Edit Layer is added.

• Added API exposure for all public BlueprintCallable Landscape Patch functions.

• Exposed landscape component's GetGrassTypes to Blueprint.

• Added generic World Partition Landscape Builder Commandlet. Builds all landscape grass maps, physical materials, and nanite components.

• Improved landscape.DumpLODs command:

  • Now it only displays the landscape LOD information by default and -detailed needs to be used to get the verbose mip-to-mip delta information.

• Added an option to align landscape grass instances with the precise triangle normal when using jittered grid mode.

  • Also fixed an issue with the triangle normal calculation.

• Added API exposure to virtual functions on landscape patch plugin UCLASSes so that they can be inherited from in other modules.

• Remove redundant and unsafe non-blocking landscape nanite build from PreSave. No longer builds Nanite at all on auto-saves.

• Added an option to Add Unassigned Blueprint Brushes in the Landscape Edit layer context menu. If a Blueprint brush does not have an assigned edit layer, the right-click context menu will include an option for re-assignment

• Added a DeleteActors helper in order to let the editor's delete actors dialog run when possible but also to let actors be safely deleted without using the UI in other cases.

• Added Landscape Edit Layer Context Menu customization system.

  • Added the ability to easily extend right-click context menu actions for custom edit layer classes.

• Moved LandscapePatch plugin out of Experimental.

• UX improvements:

  • Updated icons to landscape target layers display order methods.

  • Added sort type (ascending/descending) for this.

  • The sort/filter options have moved next to filter box within the Layers property (since they affect only the layers that are visible, these buttons should not be present when the property is collapsed).

  • Added a number of target layers in the Layers property header, in order to be similar to standard arrays and also the edit layers property above.

• Added Collapse All Edit Layers action to the Edit Layer context menu.

  • Removes all edit layers and flattens the current data into the default edit layer.

• Updated default spline edit layer selection behavior:

  • Selecting the Splines Edit Layer no longer auto-activates the Splines tool.

  • Double-Click on the Splines layer, or use the right-click context menu option, to toggle between the Splines Tool and last active tool.

Bug Fix:

• Fixed mobile landscape weightmaps not being taken into account by streaming.

• Fixed a crash when auto-filling target layers from material.

• Fixed height/weight alpha precision loss when merging landscape.

• Fixed grid-alignment warnings when creating a landscape with more than one region worth of components.

• Added refined Water Body underwater detection to avoid applying post-processing when the camera is underneath or outside the bounds of the collision volume

• No longer calls UpdateResource when changing texture LOD settings for render targets. This fixes the water brush breaking landscape after switching between desktop mobile preview mode and desktop renderer.

• Fixed landscape legacy weight blending potentially leaving ghost weightmaps on large landscapes.

• Turned assert about landscape physical material tasks failing to complete on save into an error, since that is something that can happen if the material fails to compile.

• Fixed a crash that happened when trying to clear a Landscape Paint Target Layer that was already empty.

• Fixed a crash when a Landscape Blueprint brush was deleted and then restored via Undo.

• Removed spurious assert when the landscape material references a texture named "Heightmap" (implicit name for heightmaps in landscape).

• Fixed determinism issue when updating landscapes with conflicts on the border of landscape components that would lead to landscape proxies getting dirty in an inconsistent way.

• Fixed an issue with World-Partition Landscape Proxy Nanite Materials not updating after using Undo/Redo with the Landscape Paint Tool.

• Fixed invalidations of landscape physical material during painting.

  • The last few frames of a paint stroke could be lost because the invalidations were ignored while a physical material task was still pending.

• Fixed several issues with ReinitializeHeight/Weights in landscape patches.

• Fixed crash with multiple patches. The render command recorder was not stopped at the right moment: both Render and Blend operations must respect the render mode (Immediate or Recorded), which could be broken in case the renderer was grouped with another one earlier.

• Fixed landscape that was not updated after having reinitialization had been executed.

• Fixed a crash when the same patch is rendered in several batches. The boolean bReinitializeHeightOnNextRender does not support this and that supposes that during reinitialization, the patch is rendered in a single batch. The fix artificially increases the batch size to the entire landscape, which is wasteful, but the best we can do until the reinitialization is replaced by a proper landscape edit layer partial merge.

• Fixed landscape batched merge not handling multiple weight patches (i.e. multiple target layers) being rendered on the same patch component (the render targets would cycle in between each, leading to invalid blending).

• Fixed landscape patches' input area (which was the size of the patch), that would lead to needlessly large batches.

• Fixed potential determinism issue with landscape patches that could theoretically render before their referenced textures are fully streamed in.

• Handle null landscape patch weight entries in the couple of places where it was not.

• Fixed invalid checks in landscape batched merge.

• Stop over-invalidating on empty landscape components. Change to invalidating only components that added or removed weightmap allocations.

• Fixed PCG refresh on undo/redo landscape painting.

• Moved creation of landscape nanite's UStaticMesh out to the game thread to remove danger of threading issues.

• Fixed improper blend of landscape edit layers with custom height/weight flags.

• Avoided a crash if saving when FLandscapeTextureStreamingManager is not available.

• Fixed a bad ensure condition when trying to cache data from an empty area in the landscape smooth/flatten/erosion tools.

• Fixed a crash with the Landscape Copy Tool when attempting to copy data from an invalid or deleted landscape.

• Fix deleted landscape spline points/segments coming back after duplicating the spline.

• Fixed a crash occurring when saving level instances that include World-Partition Landscapes.

• Fixed ctrl+alt+right click drag increasing/decreasing the landscape brush continuously even when the mouse was still.

• Fixed mobile landscape data hash being zeroed when entering PIE. That was leading to all landscape mobile data being rebuilt when entering PIE while in mobile preview mode.

• Fixed a landscape flatten tool conflict with undo.

• Fixed landscape flatten tool behavior at the edges of geometry.

• Fixed landscape painting errors when toggling "invert" during a brush stroke.

• Fixed an issue with the Landscape Resize tool clearing all heightmap/weightmap data for edit-layer based landscapes.

• Fixed an issue with Water Bodies automatically generating invalid collision boxes in the Blueprint editor when changing the Wave Source property.

• Prevented a crash when redoing an undo of a Water Zone actor deletion.

• Fixed an issue with the Landscape Resize tool using the wrong Y position offset while expanding the landscape.

• Fixed the handling of changing transforms when building landscape groups.

• Fixed additive blend mode for landscape texture patches.

• Fixed various landscape+water new cases where it was assumed that GetWorld() returns a valid world while it's not the case when a world is deleted from the content browser.

• Improved the Landscape Import/Export Exposed user experience by exposing the Landscape Gizmo location property to the Landscape details panel.

• Fixed a crash updating landscape edge snapshots when heightmaps are not readable.

• Fix landscape edit layers merge on Vulkan SM6.

• Fixed a crash when renaming a Landscape Paint Target Layer to an invalid name. Target Layer names must be unique non-empty names.

• Keep landscape patches in sync with their host landscape by upgrading them from the soft-dirty package list to regular dirty status when the landscape makes that same change.

• Enabled landscape grass culling when running MRQ.

  • Previously we would pass an array of no camera to RegenerateGrass, which prevents all landscape grass from being distance-culled.

  • Instead, we now pass nothing, which leads landscape to use the streaming manager to get the current "views", one of which is the captured camera (the other, the editor).

  • This is better handled in the new movie render graph but at least this solves a performance issue in grass-heavy scenes. The user can now override the grass cull distance (as well as grass density) via Game Overrides settings.

  • Default = override + cull distance multiplier of 50, to have (mostly) backwards compatibility with the previous MRQ captures (which prevented all grass culling) The default for grass density override is false, though, also for backwards compatibility reasons.

  • Note that the new movie render graph doesn't have these settings since it doesn't have them for ViewDistanceScale, ShadowDistanceScale, etc. so we figured it didn't need those grass settings either.

  • Also added a CVar (grass.VisualLog.ShowCameraLocation) to show the camera locations used by landscape grass in the visual logger.

• Now displays an error message instead of crashing when failing to import an image file to a landscape layer.

• Avoided a crash on opening a scene containing the legacy LandscapePatchManager when the scene was already at the max number of edit layers. Ignore the soft limit when creating the new dedicated patch layer.

• Fixed OOBB->AABB computation in landscape batched merge, which was leading to bad blend groups for landscape patches.

• Fixed an issue with landscape brushes that would sometimes modify height/weight data on the border with unloaded tiles.

• Avoided a crash when opening a map with a disconnected landscape patch manager, when the editor isn't ready to provide the current selection set.

• Fix for Nanite landscape possibly generating invalid Nanite mesh streaming data on cook.

• Added an option for landscape Blueprint brushes to tell if they require power-of-2 render targets to operate. For backwards compatibility reasons, it's set to true by default, although it's not the best option. This ensures that the water brush behaves precisely how it used to before UE 5.6

• Fixed the water brush on Vulkan SM5.

• Fixed an issue where Landscapes only generate Nanite for the first 64 components of any given landscape proxy.

• Fix missing landscape spline meshes after undo of merger of two splines.

• Now hides the landscape selector when the New tool in the Manage panel is active.

• Fixed a rare crash in the landscape texture streaming manager when landscape textures are GCed while the landscape is still active.

• Fixed missing updates to landscape physical material when using a material instance.

• Fixed a crash using Undo operation with a Landscape Patch and Patch Edit Layer.

• Landscape add component tool fixes:

  • Now properly generates extrapolated height data on each persistent edit layer, so that there's continuity on the corners on each of them.

  • No longer generates collisions on component creation because at this point, the height data is set to all zeroes (i.e. the minimum height, not the median, default height value) and doesn't correspond to what comes out of the the subsequent edit layers merge, whose readback would generate an identical heightmap hash, and would therefore not re-generate collisions. Delaying collision generation until the merge fixes this, since that's the first time the collision values would be valid anyway.

  • Now prevents existing neighboring components from being dirtied when adding a new component (previously they would get dirty by the simple act of caching/interpolating their height data).

  • Automatically apply splines after component creation, so that new components are immediately affected by the splines that overlap with them.

  • Improved visualizer for the component about to be added.

• Prevent landscape edge fixup from running on world composition maps, where heightmap sharing is still possible.

• Fixed all logs involving landscape LandcapeGroupKey and LODGroupKey.

• Fixed ensure loading old landscape data with landscape.StripLayerMipsOnLoad = false.

• Fixed a crash occurring after exiting a level instance with the Landscape Editor - Landscape Copy tool active.

Deprecated:

• Deprecated legacy non-edit layer landscapes:

  • Removed all editor tooling related to non-edit layer landscapes (e.g. Landscape Retopologize Tool/XY Offset data).

  • Disabled the creation of non-edit layer landscapes and the ability to toggle between edit layers and non-edit layer landscapes.

  • When non-edit layer landscapes are loaded, an automatic conversion to an edit layer based landscape occurs. During this process, all proxies copy the existing non-edit layer data to a new default edit layer. Any existing Retopologize data is removed and the proxy is flagged as "soft dirty" with an editor viewport warning.

• Removed global and local merge code and deprecated anything that was only available for this.

  • Since the console variable "landscape.EditLayersLocalMerge.Enable" is deprecated now, a new console command was added, to trigger a landscape layer full update (landscape.ForceLayersFullUpdate) :

    • With no argument: Updates all landscapes.

    • With arguments: Updates all landscapes whose display name (partially) matches the argument (e.g. with 3 landscapes named Landscape_0 Landscape_1 and Landscape_2, "landscape.ForceLayersFullUpdate _0 _1" will trigger an update on the first 2 only)

• Changed landscape edit layers merge API from experimental to official.

• Removed landscape's "intermediate render" code path.

Modeling Tools

New:

• Added support for the tangents tool to choose the reference UV layer to use when computing tangents.

• Added BrushValue property to the AttributePaintTool to allow users to specify the target value that is painted down rather than always accumulating to 1.0f.

• Added symmetry support to the Paint Vertex tool.

• The target requirements for the Inspect tool have been relaxed to support DynamicMeshProviders rather than MeshDescriptionProviders.

• Modify UBoundarySelectionMechanic to be able to operate on either closed loops (current behavior) or open spans (new optional behavior).

• Lattice Deformer Tool:

  • Modified the FFDLattice to optionally accept an oriented bounding box rather than computing one from the input mesh. This means the lattice can operate on just a portion of the mesh. Lattice computations are now all done in local space.

  • Added an ILatticeStateStorage interface, which enables the interactive LatticeDeformerTool to store its state in when the tool ends.

• Added support for a HitBackfaces option to the MeshAttributePaintTool.

• The attribute paint tool now has the option to use a more-shaded material.

• Added an option to the Mirror tool to averaging normals along the weld.

Bug Fix:

• Fixed a crash on attempting to split meshes w/ invalid material IDs.

• Fixed an issue where the AttributePaintTool's stamps would be skewed for meshes with non-uniform scale.

• Fixed where modeling tools could incorrectly change material ID assignments due to the static mesh tool target 'IMeshDescriptionCommitter' interface not finding the right material ID mapping method.

  • The same function is also on the Provider, so needed to be pulled to the top level for both interfaces to find the method.

• Made vertex sculpt tool skip render decomp step if the sculpt mesh has no triangles (fixing ensure when tool is run on an empty mesh).

• Fixed a crash in the subdivide tool. We were passing in the wrong vertex count to OpenSubdiv.

• Fixed a potential crash when enabling UVLayoutPreview.

• Fixed a warning about realtime mode erroneously appearing in modeling and scriptable tools modes when the editor doesn't have focus.

• Fixed a potential crash in DisplaceMeshTool for meshes with invalid topology.

• Fixed a GC crash with mesh element selection's usage of PreviewGeometry.

• Fixed support of the 'join method' for closed curves in the Mesh Splines tool (previously always used 'square' joins).

• Fixed a crash on starting modeling mode w/ an actor selected that has null components attached.

• Fixed a crash when swapping from Modeling Mode to Animation Mode with Motion Trails active.

• Fixed a potential crash in the ISM Editor tool.

• Fixed a potential nullptr dereference crash in OnActiveViewportChanged for StylusHandling.

• Fixed the OutputType properties' display name and tooltip to SourceType in the BakeVertex tool to better reflect the function of those properties.

• Fixed an issue where tools in Modeling Mode and Scriptable Tools Mode would not tick if the viewport did not receive focus yet during the editor session.

• Fix for crash in Extrude Path tool when creating a totally straight polyline.

• Fixed a rare crash when hovering over Mesh Element Selection before viewport is focused.

• Fixed Mesh Splines tool handling of duplicate start/end points generated on looping splines, which could previously cause incorrect triangulations.

• Lattice Deformer Op: Fixed a check that fires when operating on non-compact meshes.

• Fixed an issue where the Union tool only transferred UV Channel 0 in the result mesh.

• Fixed a potential crash in TDynamicVector::TruncateBlocks for an empty vector.

• Added a workaround to prevent a crash in UVAtlas.

• Normal seams on dynamic meshes are now automatically hard edges when converted to mesh description, which can better preserve sharp features when the dynamic mesh is used for editing a static mesh or skeletal mesh asset.

• Reduced confusion during displace tool computations by adding a slight delay to the appearance of the 'in progress' material.

• Addressed a bug which displayed random gizmo orientation in local space in the PolyEdit tool.

• Fixed an error in AddSingleClickBehavior and AddDoubleClickBehavior function tooltip.

• Fixed the StaticMeshSelector only working on exactly StaticMeshComponents.

Procedural

New:

• Added "SetWorldObject" on the PCG Data Exporter for Blueprints.

  • Objects can't be cast to World in Blueprints, and when doing an utility widget, Get Selected Assets returns an array of objects.

  • Does the cast internally, returns false if the cast fails.

• Added support for skeletal meshes in BoundsFromMesh and PointFromMesh.

  • Deprecate StaticMesh property to Mesh property in PointFromMesh, with override alias

• Added a new "Extract Attribute" node to extract any attribute from any data and domain.

  • Factorized code for Get Attribute From Point Index.

  • Get Attribute From Point Index now works with data domains too.

• Added the Polygon2D data type, that represents a 2d polygon (e.g. on a plane), with an additional transform. Has some polygon specific metadata properties on both the data domain and the vertex domains.

• Added Python Interop Plugin and Execute Python Script Node.

• Stand up the Break Debugger debug feature for GPU nodes, and make the breakpoint conditional on inspection so that it is usable in partitioned/higen use cases.

• Fixed multiple performance bugs where GPU-resident data is unnecessarily read back when passing through Change Grid Size nodes.

• Added toggle to GPU nodes to trigger render captures for debugging (editor only).

• Added GPU processor node for Attribute Sets.

• Fixed runtime generation bug where changing Partition Grid Size setting on PCGWorldActor resulted in generated actors being leaked into the level.

• Added re-nameable categories for organization in Graph Parameters + Includes Drag and Drop.

• Improved priority calculation in distance and direction runtime generation policy to behave more uniformly across grid sizes and to be easier to tweak.

  • Note: May require re-tweaking if non-default weights were in use.

• Added Generate Landscape Textures node that can generate a height map as well as grass maps from the landscape. This path does not rely on virtual textures, and is significantly more efficient than the CPU path.

• Added LLM tags for tracking memory allocations.

• Added a get segment node that allows the user to retrieve a segment from a polygon 2d, spline or point data, in the form of two points or a spline containing a single segment. Support negative indices (-1 being the last segment) in all cases and hole support for polygons.

• Added 'Clip Paths' node to cut paths (points or splines) with clipping polygons. Supports either difference or intersection.

• Add new property for data that supports elements: @Data.$NumElements.

  • Useful to combine with Filter Data by Attribute.

  • Added the concept of read-only for properties in the Selector menu to not show for output.

  • Applied this concept to Polygon2D properties.

• Added support for property remap when converting back and forth between Attribute Set and Points

  • Saves adding "Copy Attribute" nodes to do the conversions.

• Added option to disable default input creation for top-level graphs. Will become default eventually.

• Improvements on Boolean and Bitwise op.

  • Boolean op now supports arithmetic types as input, still produces a bool as output.

  • Added operators NAND, NOR, XNOR, IMPLY, NIMPLY.

  • Added ShiftLeft/Right for Bitwise.

• Added "AddModulo" operation in maths node.

  • Do operation (A + B) % C .

  • Useful to get the ($Index + 1) % NumPoints.

• Added comma-separated tag list (override) to create target actor node.

• Added polygon offset functionality (offset positive or negative, open and close holes).

• Added polygon operations (intersection, difference, union, inner intersection, exclusive or, cut polygon with paths).

• Added GPU implementation of Transform Points.

• Added change detection to runtime generation state to throttle scans over grid cells, saving per-frame Game Thread cost.

• Added 'Split Spline' node to split splines based on a few criteria (key, distance, alpha) or on a predicate on control points.

• Add `IsBuilder` to Get Execution Context node.

  • Needed to know which component the builder was scheduling.

  • Added that information to the PCG Editor Module, which can be queried through IPCGEditorModule.

  • Add helper function to get the result from the IPCGEditorModule.

• Added support for attribute curve remap.

  • Added a new mode in the existing attribute remap node.

  • Added an alias for curve remap.

  • Also exposed ExternalCurve for the spline sampler (with the new PCG_OverridableChildProperties).

• Added a 'Spline Intersection' node that computes intersections between splines (in 3d).

• Added a debug feature that repeatedly dispatches the compute graph to enable profiling, compiled out by default (PCG_GPU_KERNEL_PROFILING).

• Added String Contains and Matches nodes and .Length extractor + Extractor:

  • .Length - Length of the string

  • Contains - Whether string A contains substring B

  • Matches - Whether string A matches string B exactly

• Added Cvar pcg.GPU.FuzzMemory which initializes GPU buffers to random values during execution to help catch uninitialized data bugs and other undefined or unreliable behaviour.

• Added the ability to retrieve the ray hit material with GetMaterialFromCollisionFaceIndex, instead of needing to specify a material index.

• StructUtils: Added new features to the Property Bag Details View Child Row Widget:

  • Customizable via the EPropertyBagChildRowFeatures enum (set via metadata specifier).

  • New STypeSelector widget (wrapper around SPinTypeSelector) for type selection.

  • New Access Specifier button.

  • New drop down menu.

• Added 'Get Asset List' node to get assets from a folder or from a collection. Can extract asset classes and generated classes when these are blueprints too.

• Anim - SkinnedMesh: Exposed SkinnedAsset and TransformProvider on FSoftSkinnedMeshComponentDescriptor.

  • To have parity with the non-soft version.

  • To be used for the Instanced Skinned Mesh Spawner in PCG.

• Nanite Assemblies: Initial prototype of Nanite Assemblies builder to support creating Static Meshes.

  • Interop plugin, as this is still very experimental.

• Added specific graph cache enabled and budget CVars for editor worlds vs game worlds.

• Can now override nested properties in the Static/Skinned Mesh Spawner.

Bug Fix:

• Fixed multiple cook warnings arising from GPU node kernels.

• Fixed bugs with CreateGrid2D and CreateGrid3D Custom HLSL helper functions where the NumRows/NumCols arguments were not used correctly.

• Fixed Filter Elements by Index node's indexing issue.

• Now supports Attribute Rename for Selectors and Data domain.

• Improvements to Spline Mesh spawning.

  • Component class is now respected when spawning the spline mesh.

  • Added override on the component itself, if users have special fields they want to fill.

• Fixed an outstanding issue in package build where the Switch and MultiSelect nodes can fail if the DisplayName is different from the real name for an EnumValue.

  • GetDisplayName won't return the display name in package build but the real name.

  • Since we use the Display name for naming the pins, we need to keep a mapping.

• Fixed Create Points Sphere crash from divide-by-zero when graph params are used to set degrees to 0.

• Fix bool attribute in Write to Niagara Data Channel.

  • Writing bool values was crashing.

• Fixed bug causing Inline Constant not to respect required pin.

• Fixed Per data CRC caching issue when there are N:N mappings, which was the case in some configurations of the Match & Set node and the Distance node.

• Added support to call Pre/PostEditChange on objects on ApplyOnObjects.

  • When overriding objects with ApplyOnObject node, we call Pre/Post Edit change to have any pre/post processing to do after a change.

• Fixed an outstanding bug in match and set attributes for attribute sets in keep unmatched mode.

  • SetAttributes metadata entry keys arguments were in the wrong order.

• Can now drag and drop in the graph any asset that is a subclass to UPCGBlueprintElement.

• Fixed the RemapMaterial not working if the target dynamic mesh didn't have any material.

  • This was breaking appending a mesh with materials to an empty dynamic mesh, for example.

• Fixed erroneous readbacks and re-uploads of arrays of GPU data items that are not placed first in the compute graph's input data collection.

Texturing Tools

New:

• Improvements to UCurveLinearColorAtlas.

  • A bug was fixed which caused nearly black negative values to become white.

  • TextureHeight of Atlas is now automatically set to the number of curves.

  • The default width of new atlases is now 64 instead of 256.

  • Interactive updates are now much faster.

  • The UV scale for sampling atlases is now fixed so that the U range of [0,1] goes from the first to last pixel center. Old atlases will automatically be updated for these changes.

• Added Virtual Texture feedback and warmup support to TextureGraph material rendering nodes.

  • Virtual texture samples will now stream to the correct mip level before the final render.

  • Added a new console variable to control the warmup length: "TG.VirtualTexture.WarmupFrames".

UV Editor

Bug Fix:

• Fixed localization issue for the "Advanced Transform" category label.

• Fixed UVEditor launch conditions to support BP actors with mesh components.Fixed an issue where the RMB context menu would not display the UV Editor option for actors with any invalid components.

World Building

New:

• Added a Save Texture to Asset node (editor only).

• Added a world partition function to insert a new runtime cell transformer.

• HLOD:

  • Support Spline Mesh Components in Approximate Mesh HLOD.

  • Added world partition validation to detect actors having a HLOD Layer which doesn't support that actor class. Rules can be specified using a config file and violations trigger a warning.

• Standalone HLOD: Added AWorldPartitionHLODOnlyLevelInstance Actor to allow users to place Standalone HLODs in the world without having to add actual Level Instance to the world

  • After adding the actor to the world users can select the level for which Standalone HLODs should be loaded.

  • The actual level is neither loaded nor cooked. It's only used by the Standalone HLOD Subsystem to pull in the corresponding Standalone HLOD levels.

• Add overridable attribute support to CustomHLSL node

• Custom HLOD support:

  • Added WorldPartitionCustomHLODActor, an actor you can place in the world to provide a custom HLOD representation (using static mesh component).

  • Added a new HLOD Layer type: "Custom HLOD Actor".

  • Custom HLOD actors assigned to "Custom HLOD Actor" layer are injected as-is into the HLOD runtime partition.

  • The "Custom HLOD Actor" layer can specify a parent layer. In that case custom HLOD actors are also used to generate parent layer's HLOD representation.

  • Custom HLOD actors can also be assigned to other (non-Custom) HLOD Layers. In that case they are used only during HLOD generation and are not pulled into the HLOD partition themselves.

  • Adds a new LinkedLayer property to UHLODLayer, visible only when LayerType is set to Custom HLOD Actor

  • LinkedLayer is used to control the visibility of Custom HLOD Actors. They become visible when actors from the LinkedLayer are unloaded.

  • If LinkedLayer is not specified, Main Partition is used to control the visibility.

• Added a SceneCapture node.

• Added GPU implementation for CullPointsOutsideActorBounds.

• Now supports overridable attributes on GPU nodes.

• Added a world partition function to check if runtime cell transformers are installed.

• Cell Transformer: Improved handling of components that can be ignored.

• FastGeo: Moved FastGeoContainer PSO Precaching from PostLoad (GameThread) to be asynchronous.

• Added grid streaming dependency mode to scheduling policy

• Move PCG GPU from Experimental to Beta.

Bug Fix:

• Standalone HLOD:

  • Fixed a crash when adding a standalone LI with standalone HLOD to a non-WP world.

  • Made sure that Standalone HLOD Actors are injected into appropriate containers during streaming generation.

• Fixed attached spatially loaded actors not being GCed when AttachParent exists.

• EDL: Fixed handling of EDL injection of client-only cells in cases when it happens after BeginPlay Removes irrelevant cells from cells lists during the injection.

• Foliage Editor Subsystem: OnActorMoved optimization to avoid expensive TActorIterator operations when no work is done inside the TActorIterator loop.

• HLOD: Fixed distributed HLOD builds running on non-WP worlds not doing any work.

• WPBuilderCommandlet: Fixed logging when processing additional maps.

• Standalone HLOD: Fixed logic that generates the list of Standalone HLOD levels returned by ShouldProcessAdditionalWorlds, to correctly handle cases where the number of HLOD Setups differs from the maximum HLOD hierarchy depth.

• FastGeo: Fixed a crash on mac caused by TArray relocation of FFastGeoPrimitiveComponent which contains a FRWLock.

• [Cell Transformer] Replaced references to objects that could be recreated during RerunConstructionScripts triggered from ApplyRuntimeCellsTransformerStack in Standalone Editor.

• Fixed a crash while level editing. Deleting an actor inside a level instance then pressing save in the bottom of the level viewport would crash in some situations.

Media

Media Viewer (Beta)

New:

• Extra keybinds for videos:

  • Fixed spam of updates when offset / scale was not changing.

  • Exposed delegates to the public API so it can be used in the image viewer overlay.

• Transform lock now also duplicates media playback controls between players.

• New dragging options:

  • Revamped dragging system a little to support more zoom types.

  • Added alt+rmb to zoom (in addition to scroll wheel).

  • Added alt+mmb for panning (in addition to left click).

• Improved level editor viewport robustness:

  • Made sure all settings have default values.

  • Moved level viewport render to end of RT thread event.

  • Added cross-thread robustness to the pixel color system.

• Media track section:

  • Added a media track section that lists tracks in sequencer that have a media texture.

  • Added the refresh dynamic group button.

• Images now support yaw rotation.

• Added a clear history button.

• Added Snapshot category.

Bug Fix:

• Fixed controls to properly display when playing in reverse.

  • Also added keybind info to tooltip buttons.

• Media Viewer / Media Player Editor:

  • Added scrub event to IMediaPlayerSlider.

  • Integrated scrub event to allow dual scrubbing.

  • Fixed bug in file drag/drop for media viewer not allowing comparisons to current image.

• Media Stream: Fixed for packaged games.

• Fixed crash relating to viewport.

• Added texture size constraints to render calls.

• Fixed struct initial values.

• Fixed a crash with invalid library thumbnail.

• Fixed changing splitter location in single image mode.

• Media Stream:

  • Corrected the "Add Track" button for Media Sources.

    • Will now always display the button, but disable it, rather than hide it, when it is not available.

    • Added tooltip to the button explaining what it does and when it is usable.

    • It is now disabled if the Media Stream's world is not the level level sequence's world.

  • Fixed relevancy issue for Sequencer.

  • Fixed Sequencer binding issues.

• When locked scrubbing, the videos not being directly scrubbed is paused.

• Invalid assets are removed from history when the tab is opened.

• When in dual view and without an A image, the slider position now works correctly.

• Fixed pixel sampling for compressed images - All pixel samples now work via a render target.

• Fixed an issue with A-image not being displayed behind B-image when the slider was set to 0%.

• Right click asset fix: There's now a maximum parent check for material instances

• Fixed crash when 2 viewport tabs are open.

• Added cross-thread hardening for pixel sampling.

• Added more texture encoding types to the no-read-with-rhi list.

• You now must supply a unique name when saving snapshots.

• Toggling the overlay while in comparison mode no longer blocks the custom image ui (i.e. video control overlay).

Mobile Rendering

Mobile Lighting

New:

• Translucent objects now receive CSM shadow when surface lighting.

Mobile Postprocessing

New:

• Added EUpscaleMethod::Area and swapped in for PrimaryUpscale using the mobile renderer to reduce blurriness at low screen percentages.

Online

Crash Reporter

New:

• Apple:

  • Unified crash dump format on iOS & Mac to crashlog

  • Added commandline/ini override to enable crash dump on iOS.

• Upgrade PLCrashReporter to 1.12.0 and apply our existing modifications by diffing 1.8.1 vanilla & our modified 1.8.1

HTTP

New:

• Added an option to enable different http versions per IHttpRequest via SetOption(HttpRequestOptions::HttpVersion).

• Limit the number of concurrent HTTP requests by default. This helps avoid connection timeouts when queuing up very large numbers of HTTP requests.

Bug Fix:

• Fixed Blueprint compilation crash due to mismatching pin names.

• Fixed a low rate crash in HTTP requests.

Online Subsystem

New:

• OSS for GDK: Propagate the checkout failure error codes from GDK APIs into PurchaseFailure and PurchaseFailureStart errors.

• OnlineServicesCommon: Added TOnlineAsyncOp::GetWrappedHandle to transform the result of an operation to simplify cases where one operation is implemented in terms of another.

• Added OSSv2 PSN Connectivity interface.

Bug Fix:

• Fixed OnlineServicesNull handling FPartialUpdatePresenceFix FPartialUpdatePresence not merging RichPresenceString.

• "ENABLE_PGO_PROFILE 1" Shipping configuration can now disable online subsystems from the commandline.

• Fixed Push Event related issues

  • Fixed FNpPushEventWrapper::Initialize not correctly handling callbacks disposing.

  • Fixed OSSv1/2 FNpPushEventPushContextWrapper not handling TOptional value safely

• Fixed crash in FUserManagerEOS::ReadFriendsList callback when user failed to authorize.

• OnlineSubsystemIOS: Fixed a race condition that caused a purchase to fail when purchasing an offer immediately after finalizing a successful purchase of the same offer.

Deprecated:

• Removed deprecated GoogleSignIn support from OSSGoogle for Android.

Platform

Linux

New:

• Upgraded toolchain to LLVM 20.1.8

• Added preliminary support for BuildCMakeLib from Linux.

• Add -NoStripSymbols to UBT to support build systems where stripping needs to happen later in the process.

Bug Fix:

• Re-enabled PreLoadScreens.

• Now skips chmod +x dotnet if file is already executable. This addresses permission errors if UE is run on a read-only file system on Linux.

• Fixed an issue where BuildCMakeLib can produce .so files that depend on system shared libraries.

• Fixed loss of precision when FLinearColor is requested in VulkanDynamicRHI::RHIReadSurfaceData.

• Updated FLinuxPlatformProcess::BaseDir to support -basedir=.

Mac

New:

• Inline Ray Tracing is now available for Mac platforms running with the SM6 renderer.

• Parallel translation of encoders is now enabled by default on Mac (and can be used on iOS). This gives a significant reduction in overall RHI thread time.

• Compute shaders are now executed with concurrent dispatch on iOS and Mac platforms. This provides a significant performance boost when using Nanite.

• Adding Metal-strip to lib processing to reduce metallib sizes (around 10% reduction).

• Delete iAD framework (deprecated) from Core.Build.cs.

• Mac: Included Mac MainThread in CrashContext.runtime-xml for CrashReporter.

• Added support for Aliased formats to be explicitly declared enabling optimisation on Metal platforms.

Bug Fix:

• Fixed tweakobjectptr debug on Mac OS.

• Fixed process reaping to be non-blocking and not leaking.

• Fixed an issue where on Mac/iOS SM5 uniform buffers were bound to indices that were unnecessarily high, which caused validation errors in the RHI.

• Stopped the submission thread getting stuck when encountering a NotPermitted GPU error.

• Fixed bug where Metal runs out of counter sample buffers.

  • Metal now longer breaks encoders by default when profiling, this can still be enabled with GMetalSampleComputeEncoderTimings and GMetalSampleBlitEncoderTimings.

• Mac:

  • Fixed Cursor offset from visual because of an outdated ScreensArray when processing OnWindowDidMove, resulting from a DPI change.

  • Fixed MainThreadChecker issue in FMacApplication::OnWindowDidMove. Move bDisplayReconfiguring from FCocoaWindow to FMacApplication since it's not dependent on FCocoaWindow

• HairStrands: Disable HairStrands rendering on Mac SM5.

• ApplePlatformFile: Refactored to use the common implementation FFileHandleRegistry to support more than the limit of read-only opened files.

• Changed Fatal log to a Warning when posix_spawn fails in CreateProcInternal, for consistency with Windows, and to prevent unnecessary crashing.

• Fixed DPI scaling bug which could cause Mac's to render at 2x res when using PIE.

• Fixed performance issue on editor start up with mdfind taking multiple minutes due to matching incorrect types.

• Fixed potential bug where bindless handle could be null when retrieving viewport texture.

Online

New:

• Updated GooglePlay Billing library to 7.1.1 in OSSGooglePlay

Bug Fix:

• Pixel Streaming:

  • Fixed a crash when streaming with Pixel Streaming and a user attempts to enter text through the stream text modal on a multiline text element.

  • Fixed a crash in the editor when setting the streamID on the command line and streaming with Pixel Streaming.

• AVCodecs: Encoding frames with VP9 can now have odd pixel width or height.

Windows

New:

• Moved Win32 calls for mouse cursors off of the game thread and onto the task graph to reduce stalls on the game thread from internal lock contention that occasionally occurs.

• Moved processing of mouse inputs to a dedicated thread to reduce overhead on the game thread for Windows. This is useful for mice with high polling rates, e.g. 8000 Hz.

• Made Clang 20 the preferred version of Clang on Windows.

• Changed thread priorities for Game, Render, and RHI threads from Normal to AboveNormal on Windows.

• Increased MinimumWindowsX64TargetVersion from 0x601 (Windows 7) to 0xA00 (Windows 10) to make more functionality available directly from Windows headers.

Bug Fix:

• Ensured that shared resources are created as committed resources for improved compatibility.

• Changed our heap VA computation for transient resource allocations on Windows to fix D3D12 call failures on some GPUs.

• Fixed FWindowsPlatformMisc::SetEnvironmentVar to unset the variable if it is null or "", just like on Mac and Linux, and .NET 8.

XR

New:

• Added native support for the OpenXR XR_EXT_frame_synthesis extension, including Application SpaceWarp (AppSW) on Meta Quest:

  • To enable, set:

    • r.Velocity.DirectlyRenderOpenXRMotionVectors=1 (read-only)

    • xr.OpenXRFrameSynthesis=1 (toggleable at runtime).

  • Currently only supported on the Vulkan mobile forward renderer, and cannot be used alongside features which require standard velocity rendering (such as TAA/TSR).

• Added Android Runtime category tag for immersive mode selection.

  • See https://registry.khronos.org/OpenXR/specs/1.1/html/xrspec.html#appendix-android-runtime-category

• AddedIOpenXRExtensionPlugin hook OnCreateHandTracker().

• OpenXR XR_EXT_user_presence is now supported:

  • Added support for the user presence extension, which tells us whether the hmd is being worn if the platform supplies that information.

  • Removed the previous implementation which attempted to drive the worn state from other openxr state transitions. This had inconsistent and sometimes broken behavior across platforms.

• Replace xr.MobileLDRDynamicResolution with a new CVar, xr.MobilePrimaryScalingMode, which controls whether primary scaling is redirected to the HMD runtime (which will always use spatial scaling) when it would otherwise be unsupported.

  • Options are:

    • 0: Never

    • 1: DynRes Only (default)

    • 2: Always.

• Updated device profiles for standalone XR devices. They no longer inherit from each other in sequence, and the new Android_OpenXR device profile matches the Quest 3 profile which has had its shadow quality increased for dynamic shadows to draw by default in Mobile Preview and on Device. Consider lowering this value if dynamic shadows are not required.

• Improved expose passthrough support via the editor:

  • Added a new UENUM for environment blend modes, EOpenXREnvironmentBlendModeUpdate SetEnvironmentBlendMode() node to accept EOpenXREnvironmentBlendMode.

  • Added a new GetEnvironmentBlendMode() node.

  • Added a new GetSupportedEnvironmentBlendModes() node, which returns supported blend modes in an array in order of runtime preference (highest to lowest).

  • Added a new IsCompositionLayerInvertedAlphaEnabled() node.

  • Added an xr.OpenXRInvertAlpha checkbox to the OpenXR plugin settings.

  • Added an r.Mobile.PropagateAlpha checkbox to the Engine->Rendering->Mobile settings

  • Renamed OpenXRHMDSettings to OpenXR Settings, since it controls settings for the entire module.

• OpenXR is now building for all platforms:

  • The platform specificity of the openxr plugins and modules was problematic because content derived from these would not load on non-xr platforms for projects that are meant to be cross platform.

  • OpenXR is not actually platform dependent. It can be implemented on any platform. If it is present as a fully independent openxr runtime a small amount of platform specific code is needed to implement an openxr loader.

  • It is also possible to create an unreal plugin which either acts as an openxr runtime or is able to find an openxr runtime.

  • The plugins are still disabled by default.

Bug Fix:

• Removed permissions not allowed by Quest App Store.

• Fixed various debug draw elements failing to render when using Instanced Stereo or Mobile Multi-View:

  • r.VisualizeOccludedPrimitives

  • ShowFlag.Bones

  • DrawDebugBox and other similar calls, excluding DrawDebugString.

• Fix a bug where late update camera movements were not accounted for when calculating scene visibility, causing smearing, latency, or other artifacts when some rendering features were used.

• Fixed GetHMDData TrackingStatus field:

  • It was only checking if the hmd device tracking handle was valid, needs to check if the hmd is actually tracked.

  • It was also attempting to use the camera position rather than the hmd tracking position.

  • Removed GetMotionControllerData and FXRMotionControllerData which were deprecated in 5.5.

• Added handtracking permissions for Quest.

• Fixed OpenXR AddProfile for input always being given true rather than the passed in bHasHaptics parameter.

• Fixed a crash when using the SteamVR runtime with Vulkan.

• Fixed MetalViewport SubmitImmersive: [IOGPUMetalCommandBuffer setProtectionOptions:]:585: failed assertion `setProtectionOptions: with uncommitted encoder'

• Fixed Visionos cp_frame_query_drawable null handling:

  • We abandon the frame if the drawable is null, this indicates that the app is either being paused or exited.

  • Essentially we just continue the frame but don't call the cp_ functions.

  • At the beginning of the next frame we handle the state change.

Deprecated:

• Deleted the formerly deprecated functions from 5.3 to remove references to the UPlayerMappableInputConfig type.

Platform Mobile

Android

New:

• Added -FastIterate flag to Visual Studio/Rider/Quick Launch, to have libUnreal.so outside the APK, and made build iteration faster in general.

• Added -AndroidStudio flag to GenerateProjectFiles that generates a Gradle project that wraps around the original Gradle project that is suitable for use in Android Studio.

• The Android Vulkan detection logic now uses the same VkApplicationInfo parameters (e.g. App name, Engine version) as used by the VulkanRHI initialization, so graphics drivers that need to opt out of Vulkan for Unreal Engine apps can do so consistently.

• Implemented support for factoring screen rounded edges in computing the safe zone. The implementation means users can align the safe zone horizontally or vertically to the rounded edge excluded areas or to an average of both.

  • Additionally, cleaned up current safe zone implementation to determine size relative to the main view instead of the display as the system may reduce the main view to exclude cutout areas.

• Constrained kotlin stdlib dependencies to >= 1.8.0 to fix building issues.

• Recompiled libopenxr_loader with 16kb page support based on NDK 27.2.

• Removed need for security token for debuggable applications when using AndroidFileServer with UnrealAndroidFileTool.

• Added warning if a library on Android is not 16kb page size compatible.

• Removed bashrc/bash_profile related code, instead using zshrc for Mac as primary source of environment variables.

• Report resident size of "libUnreal.so+base.apk+[anon:.bss]+[anon:linker_alloc]" as ProgramSize on Android.

• Report resident size of all memory mapped files as MMIO on Android.

• Tag all virtual memory with "UE" VMA tag on Android.

• Added the vkquality 1.2.2 library which can be used as another data point as to whether to select Vulkan or OpenGL ES.

  • The result of the vkquality check is returned in the SRC_VKQuality that can be queried by the Android device profile selector rules.

• Updated AutoSDK "MinVersion" to NDK r27c.

• Improved AndroidFileServer (AFS) file transfer - retries and resumes for file push to device.

• Resolves potential sync issue that leaves the EditBox non responsive to text input and the keyboard in a state where it doesn't get dismissed its the 'Done' button.

  • Additionally, replaced setVisibility with add/remove View to work around an Android level spam issue when keyboard is repeatedly dismissed/invoked.

• Improved Android Camera Player with the Android Camera2 APIs and support for Vulkan frame data processing.

• Default NDK is updated to r27c, buildtools to 35.0.1, bundletool to 1.18.1.

• Recompiled libopenxr_loader with 16kb page support based on NDK 27.2.

• Replaced libhwcpipe with C wrapped .so to avoid C++ STL ABI conflicts on Android.

• Now starts loading libUnreal dependencies early for faster startup time

• Created Android-arm64/x64 configs in Visual Studio.

• Made Quick Launch now build an x86_64 binary when launching on x86_64 devices, such as the emulator.

• Lowered Android SDK "MaxVersion" to NDK r28c, due to NDK r29 compiler bug.

• Update GooglePAD to 1.15.4 / 2.3.0.

• Added engine device profiles for Mali-G1-Ultra and similar devices.

• We now detect devices using the ANGLE OpenGL ES driver and use the Vulkan deviceName string for SRC_GPUFamily. This means the device profile Vulkan selection can continue to match the same string as used when the device is in native OpenGL ES mode.

Bug Fix:

• Enabled desugar for older Android support.

• Filtered out AFSProject task if running it from Gradle (prevent second run).

• Ensured java sources are wiped when FirebaseEnabled is toggled off. Otherwise, source files are left behind that don't compile as the Java dependencies don't get populated by the plugin when FirebaseEnabled = false.

  • Additionally, registerBuildSettiings for the Firebase settings referenced from the plugin's UPL.

• Fixed the timing of firing the MediaOpened event in Android Camera Player.

• Fixed the issue that the Console Command input is disabled when "Show Launch Image" is off in Project Settings.

• Ensured keyboard OnTextCommitted messages are dispatched when using Android improved virtual keyboard.

• Ensured nativeKeyboardInputResult is invoked when keyboard is dismissed and keeps the reference to VirtualKeyboardWidget valid until the result is handled.

• Corrected issue with file locking in UnrealAndroidFileTool for writes.

• Fixed black screen when playing start movies.

• Added a watch for deletion complete before database close in Fetch2 (part of background downloading).

• Moved early load sync point to prevent possible crash due to an ordering issue.

• Made NDK toolchains detection for manual SDK installs more robust.

• Made JAVA_HOME environment setting for manual SDK installs more robust.

• Added missing setting of ndkPath to Gradle property value

• Fixed generated install scripts with overflow OBBs that are broken on non-Windows

• Updated Breakpad dump_syms with version supporting compressed symbols.

• Added catching of UnsatisfiedLinkError in GameApplication.LoadLibraries, in case some other ClassLoader has already loaded them

• Fixed the WebView freeze when switching the game to the background while loading a URL.

• Fixed VersionScriptFile not being created robustly, sometimes causing build failures.

• Worked around a Gradle bug whereby when only assets change, it attempts to patch the existing APK from previous packaging by adding asset deltas resulting in growth of the final APK payload. Workaround is detection of changes to assets and wiping the existing APK to force Gradle to repackage it correctly.

• Fixed a Java exception when closing the Camera Device during initialization.

• Fixed the "Play On Open" feature for the Android Camera Player.

• Fixed the keyboard EditBox layout on devices with cutout when the cutout area isn't used.

  • getWindowVisibleDisplayFrame returns a rectable in screen space, however, the edit box coordinates need to be provided in the main decor view's space.

  • As such, translate the results of getWindowVisibleDisplayFrame to the decor view's space by translating these by the decor view's screen position.

• libGPUCounters: Android early crash fix libGPUCounters is built with statically linked libc++, exposing a bunch of std symbols, which override those in libUnreal.so.

  • For example, it overrides std::to_string leading to an early crash:

    • Other plugin calls to_string (uses libGPUCounter implementation and its operator new & memory alloc).

    • That string is later destructed, using engine's operator delete.

    • Our allocator fatals on unrecognized pointer.

  • The fix is to add a linker version script to the libGPUCounters build and only expose C API related symbols as global.

• Updated Android TargetSDK Fix templates with AFS configuration.

• Updated Fetch2 3.3.0 with new version of androidx.room 2.7.1 (used for background downloading).

• Added detection of SQL lock error on enqueue (can happen after deleteAll in Fetch2 background downloading).

• Added new dump_syms_comp.exe supporting compressed Symbols for Android use.

• Fixed an issue with assets with starting offset other than 0.

• Made MakeApk do a clean during packaging if EnableBundle is flipped between builds.

• Fixed crash from pending JNI exception in non-Shipping builds, when skipping over checks.

• Now round rather than truncate Android getRefreshRate when converting to integer.

• Fixed the freeze of Android Media Player playback on Xiaomi 13T or devices with a similar chipset.

• Fixed TargetSDK 35 compatibility issues with background downloading.

• No longer requests WRITE_EXTERNAL_STORAGE permission if TargetSDK doesn't support non-scoped storage.

• Ensured that keyboard dismissed isn't called when the text input is accepted by the Virtual Keyboard's done key or a physical keyboard's enter key.

  • Additionally, ensured that on dismissal of the virtual keyboard, text entry type is Canceled so that text committal only triggers if the widget is configured with behaviour 'Text commit on Dismiss'.

iOS, tvOS, and iPadOS

New:

• IOS: Notification about network path characteristic FIOSPlatformMisc::OnNetworkConnectionCharacteristicsChanged can be used to know about network characteristic changes, e.g. knowing if a new connection is constrained or expensive.

• Re-enabled SetBytes and SetBufferOffset on iOS and enable on tvOS.

• Added support for Xcode26.

• The IOS rotation code now defers applying a new rotation until after we have rendered a new frame in the new orientation, for both auto-rotation and programmatic orientation selection.

  • This fixes the issue with a squashed aspect ratio when the user rotates the app at a time we cannot immediately render a new frame, such as during loading.

• Now ask for background time on iOS until all delegates called from applicationWillEnterBackground are invoked.

• Disallowed resolve of R32F MSAA targets as this format isn't MSAA resolvable in Metal.

  • Additionally, make the texture memoryless as we'll never be resolving to it.

• Exposed network changed delegate for iOS.

• Implemented functionality for -MetalPSOCache=use.

Bug Fix:

• Deferred handling of notifications if the engine isn't ready to receive.

• Occlusion Query Helpers now correct the number of frames for Metal mobile platforms.

• Ensured valid URL for pipeline cache save location.

  • The current invalid URL generated was invalid as it was constructing a file URL using the absolute string of another URL as a path parameter to the constructor, causing MTLBinaryArchive->serializeToURL to crash when used.

• Now store webauth credentials in iOS keychain using a key that does not change after uninstalls.

• Fixed some memory leaks in the iOS web browser.

Rendering

Architecture

New:

• Virtual Texture:

  • Renamed "r.VT.Support16BitPageTable" to "r.VT.PageTableMode".

    • The setting can now be modified live at run time instead of being read only.

    • Also removed "r.VT.SplitPhysicalPoolSize" which now corresponds to setting "r.VT.PageTableMode=2".

  • Unified mip color debug display for Virtual Textures.

    • "r.VT.RVT.MipColors" is deprecated and Runtime Virtual Textures now respect "R.VT.Borders" which other Virtual Textures already use.

    • "r.VT.Borders" is no longer on/off. The value now sets the debug border texel width.

    • Also added "r.VT.Borders.Mip" which isolates the mode to a single mip level.

  • Release/Recycle Virtual Texture spaces after they are unused for some time.

    • We don't release immediately to avoid cases during loading where this might trigger unnecessary Recreate/Resize work.

    • The old behavior was to never Release/Recycle unless we ran out of space slots.

    • Added "r.VT.SpaceReleaseFrames" to control this. The default is to release after 150 frames. Setting to -1 will return to the old behavior.

  • Changed draw behavior for selected meshes which only write to Runtime Virtual Texture.

    • Previously we would fully show those meshes on selection (they are hidden in the main pass otherwise).

    • Now we only show the selection outline.

• Runtime Virtual Texture:

  • The display name of the "Virtual Texture Builder" (also sometimes previously known as "SVT") asset is now "Streaming Runtime Virtual Texture" (i.e. SRVT). This avoids confusion with Sparse Volume Texture (SVT).

  • It can now be created from the content browser.

  • Now prevent StreamingTexture from being carried over when duplicating a RVT component (Save As, copy/paste...).  This avoids the common mistake of using another map's SRVT after a Save As.

• Added optional Z-increment parameter to FPixelShaderUtils::AddRasterizeToRectsPass, in order to control the Z of the quads (Z = quad index, i.e. instance id * ZIncrement). Combined with depth test enabled, this enables making the rasterization deterministic in case of overlapping quads.

Bug Fix:

• Runtime Virtual Texture preload requests now work for the adaptive page table case.

• Fixed programmatic RenderDoc captures randomly crashing.

• Fixed non DBuffer mesh decals not obeying the mesh component "Receive Decals" setting.

Lighting

New:

• Enabled VSM receiver masks for directional lights by default.

  • ~10MB memory overhead (depending on settings/scalability).

  • Often fairly significant performance improvements in uncached cases with lots of dynamic geometry.

• Disabled the selection of Virtual Textures on Rect Light components. These have never been supported in a cooked build, but were still shown in the Editor.

• Exposed Max Draw Distance and Max Distance Fade Range to Blueprint.

• Now store and propagate "cleared" flags to avoid reclearing pages we never wrote into; particularly relevant for receiver mask where we treat all dynamic pages as uncached but often don't write into them all.

• No longer allocate unnecessary receiver mask space if local light receiver masks are disabled.

• Refactored VSM ID allocation so that we can control the order more consistently. The immediate goal is to guarantee that directional lights get allocated first so that we can easily allocate receiver masks just for directional lights without the memory overhead of doing it for all local lights as well

• Added TexCreate_3DTiling flag to volume textures in TranslucentLighting to reduce memory and boost performance on some platforms.

• Marked r.UseClusteredDeferredShading and r.Mobile.UseClusteredDeferredShading as deprecated and added notification about future removal. Clustered deferred shading will be removed in a future release due to lack of utility to reduce maintenance burden.

Bug Fix:

• Fixed incorrectly reported one pass projection overflow with megalights active. Only run VSM coarse page marking once when there are multiple views as it is view-independent.

• Scale the light fade range by `GLightMaxDrawDistanceScale` to avoid lights becoming too dim at lower scales.

Lumen

New:

• Enabled half res integration on High scalability (r.Lumen.ScreenProbeGather.StochasticInterpolation 2).

  • This can soften normals in indirect lighting, and make GI a bit more noisy.

  • On the other hand it saves ~0.5ms on console at 1080p, which feels like a right tradeoff for High scalability intended for 60hz on console.

• Lumen Screen Probe Gather: Bent Normal Integration improvements (r.Lumen.ScreenProbeGather.ShortRangeAO.ApplyDuringIntegration 1)

  • Implemented r.Lumen.ScreenProbeGather.ShortRangeAO.ScreenSpace.FoliageOcclusionStrength.

  • Fixed EvaluateSHIrradiance which was causing brightening in corners.

  • Removed double AO apply during bent normal integration. Now instead of applying AO for the second time we apply only the GI approximation using AOMultiBounce, as DistantIlluminationRescale was too strong.

  • Clamp decoded AO as it could be larger than 1 causing too strong indirect specular occlusion.

  • Now support ShouldApplyDuringIntegration when Screen Probe Gather Integration and Short Range AO downsample factors match.

  • Fixed artifacts when ShortRangeAO is disabled, but ShouldApplyDuringIntegration is enabled.

• Lumen HWRT path now supports split screen.

• R.LumenScene.DumpStats 3 will now dump primitive culling information. This is useful, as it merges instances into a single entry making it easier to read the log.

• Moved GBuffer tile classification out into a single pass, which is also storing opaque history for the next frame. This pass is reused across Lumen and MegaLights for better performance.

• Screen tile marking optimizations, which speed up reflections, GI, and water reflections.

• Tweaked default settings:

  • r.Lumen.TraceMeshSDFs 0 - SWRT detail traces (mesh SDF tracing) is now a deprecated path, which won't be worked on much. For scaling quality beyond SWRT global traces it is recommended to use HWRT path instead.

  • r.Lumen.ScreenProbeGather.MaxRayIntensity 10 - firefly filtering is now more aggressive by default. This removes some interesting GI features, but also reduces noise, especially from things like small bright emissives

Bug Fix:

• Fixed missing subsurface energy by removing extra divide by PI. Now an emissive card matches a rect light reference of the same irradiance. This bug was only affecting Epic scalability (r.Lumen.ScreenProbeGather.IrradianceFormat 0 path).

• Fixed a bug on Mac platforms when running on SM5 using R11G11B10 for Typed UAV's causing rendering corruption.

• Fix visual artifacts and out of memory reads/writes when using non power of 2 Tracing Octahedron Resolution. Now Tracing Octahedron Resolution is always clamped to valid input values.

• Nanite Skeletal Mesh now supports bHasRayTracingRepresentation, so that those primitives can be skipped from Lumen under certain conditions.

• Fixed landscape culling stealing the r.Lumen.DiffuseIndirect.Allow's on changed callback. This is not needed anymore since this CVar's callback already invalidates all components, including landscape ones.

• Fixed tile artifacts on indirect specular on cloth pixels in the same tiles as hair pixels

• Don't reset temporal history on SceneTexturesExtent change. Sometimes SceneTexturesExtent can change due to inline view rendering (like water) which causes full history reset and results in visible noise on screen until things converge again.

• Skip creating RGS when Lumen is disabled from the PPV volume.

Materials and Shaders

New:

• Added an asset registry tag to find material instances causing shader permutations.

• Enabled Virtual Texture sampling on Volume material domains.

• Changed the interpretation of the PreSkinned Local Bounds material node when used on Instanced Static Mesh. Previously it was the bounds for the entire component. Now it is the bounds for the mesh instance.

• Added platform cached ini value to determine whether to compile 128 bit base pass pixel shader variations on platforms which require them. These are infrequently needed and turning them off can save 50k shaders / 15 MiB at runtime r.128BitBPPSCompilation.Allow (default is true, for backwards compatibility).

• Improved error messages reported by shader conductor to properly identify where individual error messages begin and end (and so ensure each compile error is reported on its own).

• Disabled the ZoomToFocus behavior when creating a usage node from the declaration - No longer zooms the focus of the editor since this was visually jarring for the user.

• Optimized material instance post-load in Editor builds by directly hashing the portions of shadermap ID used to construct the unique asset name, rather than constructing the full string representation then hashing.

• Added a Base field to Material Parameter Collections, which can be used to derive one collection from another, with the derived collection inheriting the base's properties.

• Added support for overriding a material's parameter collections with derived collections in material instances.

• Material scalar parameters can now optionally select an enumeration object to use for selecting scalar values by name in the material UI.

• Added default initialization of fields of FMaterialEnumerationEntry.

• Added function APIs to MaterialEditingLibrary to manipulate the new Enumeration material parameter.

• Reworked ShaderDebugData output to unify the "worker input" and "direct compile" debug mechanisms:

  • Removed r.ShaderCompiler.DebugDumpWorkerInputs cvar; always dump a valid worker input file for all jobs whenever debug info is enabled.

  • Moved writing of this file into job completion callbacks alongside the other debug artifacts, so will be written out for cache hits if r.ShaderCompiler.DumpDebugInfoForCacheHits is true.

  • Modified these files to not include a copy of the compressed source, instead using the .usf artifacts.

  • Renamed "direct compile" mode to "debug compile" and made it use this file instead of needing to serialize extra data into the debug .usf file.

  • Removed the r.DumpShaderDebugWorkerCommandLine cvar; all jobs will export a DebugCompileArgs.txt file containing the commandline that can be used to run SCW in debug compile mode by default.

  • Modified shader pipeline compile jobs to export a single worker input file (in the first stage's debug folder).

    • Each stage of a pipeline will export their own DebugCompileArgs.txt (for convenience, so if only a single stage fails you can still navigate to that stage's debug folder and run the job from there).

    • The debug compile for any pipeline stage will run the full pipeline job (so compilation always matches what happens in the normal context) with paths modified to be relative to that specific debug folder for convenience (so when downloading debug output from another machine, only one path in the commandline needs to be fixed up to run)

• When using the Material Editing Library of functions, now always refreshes the material instance editor when changing material instance parameters.

  • This fixes a bug where you would set a MI parameter via a python script and the MI Editor wouldn't update the properties panel to show the newly updated value.

  • Automatically call UMaterialEditingLibrary::UpdateMaterialInstance() whenever a parameter on a instance is set via the library.

  • UMaterialEditingLibrary::UpdateMaterialInstance should try to find any open material instance editors and tell them that the material instance has changed.

  • FMaterialInstanceEditor::NotifyExternalMaterialChange now calls `Refresh()` which will update the whole editor, including the property window, to properly reflect any parameter changes made by the library.

• Inconsistency fixed on Comment Bubbles on Material Editor:

  • To ensure visual consistency new Comment bubbles created use the same color value as the other node editors, like Blueprints.

• Material Editor: Added two experimental custom output nodes `Motion Vector World Offset (Per-Pixel)` and `Temporal Responsiveness` to give users a way to modify per pixel motion vectors and set how responsive the temporal history is.

  • Temporal Responsiveness: Describes how temporal history will be rejected for different velocity mismatch levels.

    • Default :0

    • Medium (0,0.5]

    • Full (0.5, 1.0].

    • Now, it will be used by TSR to change rejection heuristics. Translucency material can also use it to request higher responsiveness if depth is written (r.Velocity.TemporalResponsiveness.Supported=1) or clipped away (r.Velocity.OutputTranslucentClippedDepth.Supported=1).

    • The translucency mask generated improves TSR thin geometry quality.

  • Motion Vector World Offset (Per-Pixel): Works similar to the `Previous Frame` input of `Previous Frame Switch` but in the pixel shader. Regions with invalid velocity will be approximated with the current frame's offset.

    • This function currently supports non-nanite meshes only in non-basepass velocity write and is implemented in two passes. Use r.Velocity.PixelShaderMotionVectorWorldOffset.Supported to enable it.

• Added support for customizing the file name for ShaderSymbols and ShaderTypeStats output files.

• Exposed EMaterialProperty::MP_MaterialAttributes to Blueprints, Python, and the Editor UI.

  • This way users can use the Blueprint MaterialEditingLibrary to connect expressions to the MaterialAttributes output on the material block for materials that use MA.

• Added a MaterialEditingLibrary function called RenameMaterialParameterGroup and RenameMaterialFunctionParameterGroup which bulk renames all the Group Names on many Material Parameters at once.

  • Changed LogMaterialEditingLibrary verbosity to include `Log` messages.

  • Simply loop over all material expressions that are parameters and if the OldGroupName matches change the name to the new one.

  • Call RecompileMaterial to force the material to recompile so MIs update through the editor.

  • Unfortunately the `Group` property of material expressions is spread across many different classes. To avoid checking all the different material expression types (there are 8 different UMaterialExpression classes with their own unique Group), I've opted for a property system approach that looks for the property by name.

• Optimize pipeline cache to reduce single allocation size and improve performance by copying less data on resize.

• Modified output of shader formats using DXC (DXIL output) to keep the reflection data in the DXIL container if the r.Shaders.ExtraData cvar is enabled. This is a workaround for graphics tools which cannot correctly re-generate reflection information from external PDBs.

  • Note that this bloats runtime memory usage so should only be enabled locally if you are encountering issues seeing data formats (i.e. cbuffer layouts) in such tools.

• Can now copy/paste material errors in the PlatformStats panel.

  • Simply makes the text read-only "editable" so the user can select the text and get automatic copy/paste functionality.

• Rename the aliases for the Convert node from `Make Float4` to `Make Vector4` to match "Vector Parameter" and "Constant Vectors'.

  • This also avoids confusion with the existing Make Float 4 Engine Material functions.

• Added additional project-specific texture groups.

• Vector Parameter Expression now shows output pin display names to avoid confusion on what the first output pin is.

  • Also fixed "Convert to Constant" for vector parameters. By default the outputs are now:

    • RGB

    • R

    • G

    • B

    • RGBA

  • Users were expecting the first output pin to be RGBA, but it was RGB.

  • Now shows output name on pins by default for vector parameter.

  • Added RGBA output as the final one to match what TextureSample does.

  • Updated this behavior in the new material translator (it should really use the outputs array which is already defined).

  • If no channel names are specified show R, G, B by default.

  • No longer truncates and loses user data when using "Convert to Constant" for Vector Parameter -> Constant.

  • Gave constant 4 expression display names so the conversion code can match outputs by name when converting nodes.

• Marked deprecated virtual functions from MaterialInterface and FMaterial as final to avoid silent errors.

  • Modified all derived classes to override the right functions.

• Improved IO performance of FinishPopulateShaderLibrary.

• Added a new debug artifact (ShaderTypeStats.csv), dumped by default for all cooks to the ShaderDebugInfo folder for each shader format.

  • This CSV file contains permutation counts/code sizes for all shaders in the shader library, grouped by shader type.

  • Note that this is not directly representative of final shader memory usage since it doesn't account for potential duplication of bytecode introduced by the pak chunking step (where shaders used in multiple pakfiles will have a copy in each).

  • This is only intended to be used as a tool for tracking and comparing shader growth over time or between cooks.

• Subsurface Profile: Improved neighborhood validation for checkerboard when enabled, less bleeding into subsurface scattering region for low res.

Bug Fix:

• Virtual Texture Pending Mips debug view now takes screen scaling into account.

• Fixed UMaterialExpressionParticleSubUV::Compile bug that caused the node not to use the texture object connected to the Texture input pin.

• Repaired cook editor-only-data nondeterminancy in materials.

• Ensured that FDefaultMaterialInstance's CacheUniformExpression is cancelled on destroy if still pending.

  • Under certain conditions the FDefaultMaterialInstance could be destroyed and subsequent dispatch of CacheUniformExpression would result in a crash due to a dangling reference. This replicates functionality from FMaterialInstanceResource for which this guard is already implemented.

• Fixed a potential out-of-bounds read when remapping shader compile diagnostic messages; could occur if there were no digits before the end of the line in the diagnostic message after the __UE_FILENAME_SENTINEL marker.

• Fixed material shader map not releasing compilation ID if shaders failed to compile.

• Fixed incorrect reporting of line numbers when compile errors are encountered in generated material code.

  • The code calculating the line number offset of the substituted #line directive in MaterialTemplate.ush was incorrect.

• Fixed a bug that could cause a retry loop when running with shader development mode enabled and a preprocessing failure is encountered.

• Fixed crash in SafeRenameEditorOnlyData() when EditorOnlyCurrent is null.

• Fixed a material derivative autogen crash when dealing with uints.

• Fixed a crash occurring when the material parent of an instance is changed through scripting.

• Fixed ShadingModel material expression in-node combobox to display only valid shading model entries.

• Made a minor fix for custom ShaderTypeStats customized name, needs to lookup cvar by ShaderFormat.

• Added support for Nanite Geometry Collections to Preskinned Local Bounds material node.

• Fixed an issue where the Vulkan shader pipeline cache would sometimes incorrectly produce cache misses for shaders that had already been compiled and serialized.

• Fixed shader output for preview/transient materials being cached in DDC.

• Changed UMaterialFunctionInterface to include the BlueprintType annotation.

• Removed incorrect application of the component scale to the output of World Space Vertex Normal node when used with skinned mesh.

• Fixed an uncommon crash in Lerp material expression when the alpha pin was connected to a non-primitive output.

MegaLights

New:

• Implemented MegaLights-driven VSM marking to only mark VSM pages that MegaLights has selected samples for.

• Added the r.MegaLights.DownsampleCheckerboard, which can run sampling/tracing at half res (every other pixel). It's a good middle ground between default quarter res sampling and option full resolution sampling.

• Exposed r.MegaLights.HardwareRayTracing.ForceTwoSided, which allows to flip between matching raster behavior and forcing two-sided on all geometries in order to speedup tracing.

• Now always vectorize shading samples. This saves on average 0.1-0.2ms in complex content on current gen consoles.

• Improved spatial denoiser filtering after disocclusion.

• Limited number of samples sent towards the directional lights to a specified fraction (r.MegaLights.DirectionalLightSampleFraction). This helps with noise indoors, where there's a strong directional light inside taking over the entire sampling budget.

• Now uses downsampled neighborhood for temporal accumulation. Interpolated pixels don't add much to neighborhood stats, so we can skip them, improving quality by effectively using a wider neighborhood filter. This also improves performance of the temporal accumulation pass, as it now can load less data into LDS.

• Now properly handle invalid sample upsampling. Sometimes during upsampling we can't find any valid sample and need to fallback to history (without any neighborhood clamp). This makes lighting on highly detailed or thin geometry a bit sharper and a bit more stable.

• Disabled guiding tile filtering and added stochastic bilinear sampling of guiding tiles in order to hide tile artifacts.

• Now merge identical rays in order to avoid overhead of duplicated traces. Duplicated rays happen with strong point lights, where we may send a few identical rays to the same light doing unnecessary work.

• Added screen space trace for hair (r.MegaLights.Hair.ScreenTraces). Screen space traces improve card hair quality compared to approximate RT fallback mesh, but can be noisy. In order to reduce the noise there's now extra hair only screen space trace bias (r.MegaLights.Hair.ScreenTraces.Bias).

• Merged downsample factor / checkboard CVars into a single r.MegaLights.DownsampleMode CVar.

Bug Fix:

• Now require ray tracing platform support, in order to skip compiling and cooking MegaLights shaders on certain platforms.

• Fixed split screen crash due to out of bounds memory reads.

• Fixed denoiser artifacts on borders between dielectrics and metals (bright outlines) caused by too aggressive material demodulation factors.

Nanite

New:

• The dithered opacity mask option is now supported for Nanite rasterization.

• Added a new culling check that can improve Nanite culling speed and reduce the amount of memory needed for candidate clusters (r.Nanite.Culling.MinLOD).

• Added support for rendering Nanite skinned meshes in the animation editor.

• Exposed NanitePixelProgrammableDistance for Nanite skinned meshes to enable forcibly disabling pixel programmable rasterization of Nanite when the mesh is further than a given distance from the camera.

• Added experimental and optional passes to prime the HZB before VisBuffer rendering if the HZB is missing (e.g., due to a camera cut), see cvar r.Nanite.PrimeHZB et al.

  • The main idea is to draw a lower resolution (HZB or lower) and lower detail (by using LOD bias and/or drawing only ray tracing far field scene geometry).

  • This new render is then used to build a HZB with some depth bias that is then used to render the full scene, greatly improving the cost in many cases.

• GeometryCollection: Added a "Nanite Minimum Residency" setting for Geometry Collection assets. This controls the number of resident nanite root pages.

  • Previously we used a single root page and this is still the default.

  • Increasing the value can avoid pop-in when a Geometry Collection is first shown.

• Added support for disabling "Render In Main Pass" on static mesh components for Nanite meshes.

Bug Fix:

• Fixed a bug where the World Position node would return incorrect results when used to calculate opacity in a masked material.

• Automatically disable Software VRS when Nanite is not enabled, preventing it from generating shading rate images which will not be used.

• Fixed a rare streamer crash that could occur when a streaming page is resident in the streaming pool while its root page slot gets reused a multiple of 256 times.

• Invalid page requests from the GPU are now ignored and optionally logged, instead of potentially resulting in a crash.

• Suppressed console warning spam when `r.Nanite.Visualize` is set to an invalid value.

• Fixed an incorrect conservative instance draw distance test used in the hierarchical instance culling that caused missing instances.

• Nanite: Fixed incorrect geometric normal when using r.RayTracing.Nanite.Mode=1.

• Fixed a GPU crash that could occur when Nanite was rendering to odd viewport sizes.

• Fixed a crash in Nanite primitive filtering that can happen if HLOD force-hidden primitives, or the view's ShowOnlyPrimitives/HiddenPrimitives, contain invalid primitive IDs when there are no primitives in GPU scene.

• Fixed a regression where if a static mesh has multiple mesh sections of the same material, Nanite build would merge them into a single mesh section, which could cause them to be re-ordered and cause issues. Now the multiple mesh sections remain intact, but the fallback will not have triangles in the duplicated sections.

• Fixed an issue where the sign of the TwoSidedSign node would be flipped for masked materials.

• Fixed a crash caused by enabling a Nanite visualization mode when instanced stereo rendering is enabled.

• Fixed an issue where MaxHierarchyDepth was not calculated correctly, which could under rare circumstances result in streaming not progressing beyond a certain point.

• Fixed an issue where having a non-Nanite capture in the scene can cause the Nanite streamer to not get updated and result in GPU hangs.

• Fixed an issue where scene captures and main view rendering would independently try to update residency, sometimes resulting in visual artifacts.

Niagara

New:

• CascadeToNiagaraConverter: Can now add template emitters.

• Supported read / write icons for stateless: You can now more easily see where bindings are used in LW emitters.

• Added a way to release resources from render target 2D:

  • Changed handling of null texture to set the material default to avoid dangling references.

• Removed slate dependency from emitter merging (used by python scripts), which could trip up commandlets that ran without the editor UI.

• Other distribution types can now opt into indexing / address / interpolation.

• Initialize particle add lookup value mode options:

  • Added initial look up value mode enum.

  • Enabled lookup on initial position.

  • Changed color to a distribution.

• Added getter method for Niagara parameters.

• Lazy instantiate parts of the baker to reduce memory usage:  Added a call to tick the baker world as paused, this ensures the world manager is called to process clean up functions.

• Arrays for LW distributions:

  • Made a large refactor to make reading a distribution a function call vs a structure.

  • When sampling a value needed for motion vectors pass in multiple time parameters and it will return both values to ensure random is respected.

  • Some limited space was added to pack indexing into the data, this can be controlled using meta data on the distribution property.

  • GPU storage moved to ByteAddressBuffer for LoadX operations which gave a small speed boost.

  • Perf on a large number of particles was marginally better vs before.

• LWE:

  • Added support for debug HUD particle attribute display.

  • Added support to data set readback.

• Adjusted display name for SKM / SM DIs to remove confusion between the asset types.

• Changed pin color based on Data Interface vs UObject to reduce confusion.

• LWE Shape Location Changes:

  • Added shape scale.

  • Fixed plane shape not applying rotation.

  • Added surface mode to the cylinder.

• Material Parameter Collection Data Interface: You can now push scalar / vector parameters from Niagara to MPCs.

• Removed UNiagaraEmitter from stateless emitter on cook.

  • The cooked build does not require them, various parts of the UI still make assumptions and will be cleaned up.

  • This saves ~4k per stateless emitter.

• Added rotator distribution to stateless & use in shape location to allow the rotation to be bound to an attribute.

  • Fixed the axis not properly being used on the display name for each widget.

  • Fixed the same binding being added multiple times.

• Niagara Editor Preview Actor:

  • Used for previewing and tuning Niagara Systems without the need to run PIE.

  • Has some simple default motion options which can be overridden by a derived Blueprint for more complex behavior.

• Niagara Fluids: Added vector controls for turbulence frequency and gain.

• Niagara Content: Added distribution curve dynamic inputs for float, vector, and vector2D types.

• Weighted Distribution Int Array:

  • Each entry has a value & weight.

  • The Weight is used in the random calculation, so the higher the weight the more likely it is to return that value.

• CascadeToNiagaraConverter: Added UPROPERTY() tags.

• When changing the preview platform, now invalidate the cooked status.

  • We need to make sure everything is in sync when the device profile changes to avoid crashes inside the VM.

• Added Niagara to Visuals placement menu.

• Updated Stateless Rotate Around Point module:

  • Added coordinate space / rotation / center.

  • Added a CPU path for the module.

  • Added Debug Draw support.

• Added a property to customize quick capture number of frames.

• Added ID support to Sim Cache Reader.

• Added wildcard name match exclusions to sim cache compare.

• Validation rules can now be disabled by config file.

• Added information about who is using sorting.

  • Added a marker to sort key generation.

  • Added a console variable fx.Niagara.Batcher.DumpSortedSimulations which can be used to dump to the log.

• Changed the color grad editor stop time widget to use the spin box.

  • This allows for math operations and validation of the input data.

• Dynamic Mesh Sim Cache Storage + Visualizer.

• Added all base Niagara float types to sim cache interpolation.

  • Enabled by default can be disabled by changing bInterpolateAllTypes in the creation parameters.

  • This improves MRQ renders with temporal samples.

• Added concurrent sim cache reading when no data interfaces are cached.

  • Can be disabled using "fx.Niagara.SystemSimulation.AllowASyncSimCache".

  • Enabled concurrent execution for fixed DT systems if it's a single tick.

  • Fixed a bug in the component recaching where it ran all the time in the editor.

• Stateless Curve Editor Improvements:

  • Moved the existing LW curve editor into the compact curve editor.

  • Added a new curve editor for distributions which is closer to the existing curve editor.

  • Exposed some of the common widgets shared between the editors.

  • Future change will be to wrap the DI inside the distribution adapter and share the editors, which will be useful for the compact editor also

• Made the FXSystemInterface sharable to fix world tear down reference issues.

  • In some situations an FX component can be destroyed after the world.

  • When the world is destroyed it will destroy the FX system set, which will enqueue a command to destroy the FX interfaces.

  • The render command can execute before the FX component's are destroyed leaving them with a dangling reference.

• Added a setting to enable HLSL 2021 in Niagara.

  • HLSL 2021 features will fail to compile on the VM and on some platforms, but this allows users to experiment.

• Added an enum for notify progress, none / forward / reverse.

  • Fixes issues around using negative rate scaling and allows the user to still use 0-1 when playing backwards.

• Disable Source Mode with LWE to reduce confusion.

  • We don't have a particle stack so there is no way to modify the data without binding to system / user parameters.

• Added console commands (fx.Niagara.Component.ReinitializeActive & fx.Niagara.Component.DeactivateActive) to allow a quick way to kill / restart Niagara components.

  • Cleaned up various console variables while I was here.

• Niagara: Properties (Section Start Behavior, Section Evaluate Behavior, Section End Behavior, Age Update Mode, Allow Scalability) in UMovieSceneNiagaraSystemSpawnSection can now be set in Blueprints / Python.

• Multiply the debug draw color by alpha so we can have translucent lines.

• Now send the current bounds to the GPU for the emitter properties DI.

  • This makes the result of GetBounds consistent between both paths when using fixed bounds on the emitter.

• Removed stateless emitters from compilation.

  • Previously they would still generate some HLSL data resulting in compilation when added / removed.

  • Cleaned up several areas that assumed Emitter Data would always be valid.

• Made renderer memory savings by reducing FNiagaraVariableAttributeBinding.

  • Sprites 1992 -> 1320 = 672

  • Mesh 1688 -> 1160 = 528

  • Ribbon 1888 -> 1312 = 576

  • Light 800 -> 560 = 240

• Added a rule for validating material usage in renderers.

  • This makes it possible to block content that does not have the appropriate usage flags set.

• Niagara Content:

  • Added a new dynamic input to support querying values from the new Weighted Distribution Int Array data interface.

  • Added new modules for spawning particles from simulation caches.

• Removed all the async optimize / decompression of VM byte code.

  • The new VM does not use this path so the code is dead.

• Enabled Sub UV cutouts ES3.1.

• Can now use the Niagara Data Interface to set material parameters on Material Instance Dynamic objects, from a CPU stage.

• CascadeToNiagaraConverter: Add more script input types.

• Added Shift+D to enable selected emitters (reverse of D which disables selected emitters).

• Refactored renderer widgets to share code and use small chip

• Added a menu entry when we have no stateless bindings to make it clear to the user what type we are looking for.

• Added a debug draw to renderers.

  • Implemented debug draw for light & decal renderer.

• Added column sorting to sim cache viewer.

  • Also cleaned up how we build the table data to make it less confusing.

Bug Fix:

• Fixed issue where ParticleSystem EPSUM_FixedTime had no effect due to incorrect assignment.

• Fixed validation accidentally changing usage with flags on materials.

  • CheckMaterialUsage will both check and set which can result in a race with shader compilation.

• Use the component transform for local space vs the simulation one - When disabling requires current frame data (for performance) these could be out of sync, which mismatches other renderers on the RT (i.e. sprites & meshes)

• Fixed hash function in data channel to use full string data instead of just half of it.

• LWE: Set the sim target on the compiled data set to match the mode.

  • This fixes a mismatch that can cause attributes to not upload to the GPU when we are in CPU mode due to using the light / decal renderer.

• No longer call the OnSystemFinished delegate if we are constructing Blueprints.

  • The delegate might interfere with the actor / components and can cause crashes.

• Shader loading: Now prevent dereferencing potential nullptr when file is not found.

• Fixed emitter renderer tick ordering issue when combined with LWE.

• Added missing postload calls for stateless emitters.

• Guarded against using EmitterData as it can be nullptr.

• Fixed binding buffer changes causing dispatches to serialize on some RHIs.

• Fixed potential OOB reads if a binding is invalid.

• Added a lock to GPU Sort Manager AddTask to ensure no concurrent access.

  • This fixes a race between Niagara & Cascade adding tasks.

• Now calculate spawn probability per particle for spawn rate, rather than per loop.

• Fixed user variables being removed and renderers not updating correctly.

  • The variable was without namespace so failed to match.

• Added a missing null check for the graph source that can happen during undo.

• Fixed GetResourceSizeEx miscalculating for non-isotropic UTextureRenderTargetVolume.

• Niagara component renderer: now only register one object replacement delegate with the CDO to prevent races during asset loading.

• Added missing CanBind to user parameters.

  • Changed style of binding to be more consistent with other bindings.

• Now sets the world time information in the baker.

  • This fixes things like Engine.Time always being 0.0 and material based time effects not working as expected.

• Used GroupMemoryBarrierWithGroupSync with Radix Sort to fix issues on various GPUs.

• No longer load niagara system when getting asset registry tags, to prevent deadlocks during emitter merging.

• Disabled low latency when anything other than the lit view mode is active.

  • Some of the view modes short circuit rendering so the data may not be ready in time.

• Fixed a crash when copying script variable metadata.

• Handled null data interface inside Niagara Variant.

  • It is unclear how the variant DI becomes nullptr at the moment, this will at least avoid crashing the editor, but more investigation is required to understand why.

• Fixed duplicating an emitter with RunUpdateScript set for interpolation mode changing post duplication to NoInterpolation.

• Fixed single segment GPU ribbon UV calculations being incorrect.

• Fixed a potential use-after-free on world tear down.

  • If the compute interface is marked pending kill we can ignore sending the command to remove from the computer interface as it will be killed before.

• Fixed an asan issue using the component in the lambda.

  • Bring changes over for garbage references also.

• Fixed incorrect stride with FRibbonAccumulationValues when using different features.

• Fixed color curves not working inside NPCs when using GPU emitters.

• When modifying parameters in the detail panel, now use the editor setting GetResetSimulationOnParameterChange to see if we should reset the system or not.

  • Disabling reset can be useful to iterate on content live.

• Fixed editor undo crashing due to order being out of sync and the thumbnails.

• Fixed update context killing systems that are waiting for compilation.

  • When switching preview modes the update context is called multiple times.

  • The first time it's considered active.

  • The next time it's no longer active but is waiting for compilation (compontent ticking) so is now removed from the reactivate list.

  • We now check if the component tick is enabled due to waiting for compilation results.

• When setting up previous data use current if previous does not exist.

  • Current changing to a new position binding which does not have a previous value generated it would use the default position which is 0,0,0. Using the current value won't produce corrupt motion vectors, but will also not produce correct motion vectors.

• Changed default for LOD size Y to -1 to fix issue with meshes being culled incorrectly.

  • A value of -1 indicates that it will never be culled by screen size.

  • The previous value of 2 would be adjusted to 1.0 and fail the >= screen size test if bounds were large enough.

• Now uses the aliased variable when finding the default mode

  • This fixes an issue if the first time a variable was encountered it was in StackContext as we would ignore the binding.

• Fixed a bug where min instead of max distance was used as LoD parameter.

  • Fixed a nullptr and weak ptr bug in error log format.

  • Fixed a bug when an error during script merge occurs.

• Fixed memory leak in data channel object destructor.

Path Tracer

New:

• Improved the adaptive sampling heuristic.

• Added an option to hide the planet ground surface.

  • When using reference atmosphere mode, the path tracer no longer displays a large ground sphere to represent the planet for better parity with the deferred renderer.

  • The old behavior of showing the planet ground can be accessed by the cvar r.PathTracing.EnableAtmosphereGround.

• Post-process materials can now be specialized for the path tracer.

  • This adds a permutation of the PostProcess Material that is used when the path tracer is enabled on the view.

  • This can be used to account for differences in how the path tracer creates the image. Behavior can be customized with the PathTracingQualitySwitch node.

Bug Fix: