Getting Started with Pixel Streaming | Unreal Engine 4.27 Documentation

Google has informed developers of a vulnerability in versions (earlier than M102) of WebRTC. Impacts, workarounds, and updates can be found here.

Follow the steps below to stream the rendered output from your Unreal Engine Project over your local network to browsers and mobile devices.

The images for the steps on this page illustrate the procedure using a Project built from the Third-Person Blueprint template. However, the same steps should work for any Unreal Engine Project.

Prerequisites

Check your OS and hardware - The Pixel Streaming Plugin can only encode video on computers running Windows operating systems, with certain specific types of GPU hardware. For details, see the Pixel Streaming Reference.
Install node.js - If you don't already have node.js installed on your computer, you'll need to download and install it.
Open network ports - Make sure you have the following network ports open for communication on your local network: 80, 8888. If you need to change these defaults, see the Pixel Streaming Reference.
Stop other web servers - If your computer is running any other Web servers, stop them for now.
IP addresses - You'll need to know the IP address of your computer. It's a good idea to get started with Pixel Streaming within a LAN or VPN, which means that you'll need the internal IP address of your computer. You can get this by running the ipconfig command from a command prompt or console window, and finding the line that starts with IPv4 Address. If you are trying to connect from a machine on a different network, you'll likely need to configure your signalling server to use a STUN/TURN server. See the Pixel Streaming Reference page for details on how to configure your signalling server with peerConnectionOptions that specify a STUN/TURN server.

1 - Prepare Your Unreal Engine Application

In this step, you will create a standalone executable file for your Project.

The Pixel Streaming Plugin only works when you run your Project as a packaged application, or when you launch it from the Unreal Editor using the Standalone Game option.
In order for the Pixel Streaming Plugin to extract and stream audio from your application, you need to start the Unreal Engine with a special command-line flag: -AudioMixer. The procedure below shows how to set this up for both scenarios.

Open your Project in the Unreal Editor.
From the main menu in the Unreal Editor, select Edit > Plugins.
Under the Graphics category, find the Pixel Streaming Plugin and check its Enabled box.
Click Yes to confirm.
Click Restart Now to restart your Project and apply the change.
Back in the Unreal Editor, choose Edit > Project Settings from the main menu.
If your Project involves a character, and you want to enable input from touch devices such as phones and tablets to move that character around the Level, you may want to show the on-screen touch controllers. Under the Engine > Input category, find and enable the Always Show Touch Interface setting. This is optional, and not required for all Projects. However, for Projects like the Third-Person Template, this makes sure that users with touch devices can control the streamed application (as long as the Project's Player Controller supports touch input).
From the main menu, choose Edit > Editor Preferences...
Under the Level Editor > Play category, find the Additional Launch Parameters setting, and set its value to -AudioMixer -PixelStreamingIP=localhost -PixelStreamingPort=8888.
Package your Project for Windows. From the main menu in the Unreal Editor, choose Files > Package Project > Windows (64-bit).
Browse to the folder on your computer where you want the Unreal Editor to place the packaged version of your Project, and click Select Folder.
The Unreal Editor begins the packaging process.
When the packaging process is finished, go to the folder that you selected in step 6 above. You'll find a folder called WindowsNoEditor with contents similar to the following:
Every time you start your packaged application, you need to pass it the same command-line flags set in step 9 above. One way to do this is to set up a shortcut:
1. Press Alt and drag your .exe file to create a new shortcut in the same folder (or anywhere else you like on your computer).
2. Right-click the shortcut and choose Properties from the context menu.
3. On the Shortcut tab of the Shortcut Properties window, append the text -AudioMixer -PixelStreamingIP=localhost -PixelStreamingPort=8888 at the end of the Target field, and click OK.

Once you've gotten the Pixel Streaming system up and running, you may also want to add the -RenderOffScreen command-line parameter. If your Unreal Engine application window ever gets accidentally minimized, the Pixel Streaming video and input streams will stop working. -RenderOffScreen avoids this possibility by running the application in a headless mode without any visible window.

End Result

You now have a packaged, standalone Unreal Engine application that has the Pixel Streaming Plugin enabled, ready to stream its rendered frames and audio.

2 - Start the Servers

In this step, you will start the web services that will help to establish peer-to-peer connections between your Unreal Engine application and clients' browsers.

The following steps assume you are using Windows. However, Linux is the same process except that you run the scripts in the SignallingWebServer\platform_scripts\cmd\bash folder instead.

In your Unreal Engine installation folder, find the location of the Signalling Server under Samples/PixelStreaming/WebServers/SignallingWebServer.
To prepare for the Signalling Server, start by opening PowerShell as Administrator and running SignallingWebServer\platform_scripts\cmd\setup.ps1. This will install all the required dependencies.
Start the Signalling Server by running SignallingWebServer\platform_scripts\cmd\Start_SignallingServer.ps1. When the server has started and is ready to accept connections, you'll see the following lines in the console window:

		WebSocket listening to Streamer connections on :8888
		WebSocket listening to Players connections on :80
		Http listening on *: 80

Now, start the Unreal Engine application from the shortcut that you created in the previous section. Or, if you prefer to launch your application from the command line, execute the following command:

		MyPixelStreamingApplication.exe -PixelStreamingIP=127.0.0.1 -PixelStreamingPort=8888

For convenience, when you package your Unreal Engine application, these servers are also copied to the folder that contains your packaged executable. You'll find them under the Engine sub-folder, at the same paths indicated above. You can launch the servers from there instead of launching them from your Unreal Engine installation folder. However, remember that if you need to modify any files in these folders, particularly the player page or configuration file for the Signalling and Web Server, you should modify them in the original location. If you modify them in your package folder, your changes may be overwritten the next time you package your application.

End Result

When the Unreal Engine application connects to the Signalling and Web Server, you should see the following line of output in the console window opened by the Signalling and Web Server:

Streamer connected: ::1

This means that you now have the Unreal Engine application running with the Pixel Streaming Plugin enabled, and the front-end Signalling and Web Server is ready to route connecting clients to the Unreal Engine application.

If necessary, you can stop and restart the Unreal Engine application and the Signalling and Web Server independently. As long as they're both running at the same time, they should be able to reconnect automatically.

At this point, you have everything you need set up and working on your computer. All that's left is to connect a browser.

3 - Connect!

In this step, you'll connect Web browsers running on multiple different devices to your Pixel Streaming broadcast.

On the same computer that is running your Unreal Engine application, Alt-Tab to switch the focus away from the Unreal Engine application, and start a supported Web browser (Google Chrome and Mozilla Firefox are safe choices).
In the address bar, navigate to http://127.0.0.1. This IP address of the local machine, so the request should be served by the Signalling Server:
Click the page to connect, then click again on the Play button to start the stream.
You'll now be connected to your application, and you should see the rendered output streaming into the middle of the player Web page: The default player page is already set up to forward keyboard, mouse, and touchscreen input to the Unreal Engine, so you can control the application and navigate around exactly the way you would if you were controlling the app directly.

Click the Add (+) button at the right of the window to expand some built-in options for controlling the stream:

Setting	Description
Kick all other players	Causes the Signalling and Web Server and the Unreal Engine application to close all connections with all other browsers except for the current one.
Enlarge Display to Fill Window	Determines whether the media player should resize to fit the current size of the browser window, or whether it should remain at a fixed size and position.
Quality control ownership	Makes the encoder of the Pixel Streaming Plugin use the current browser connection to determine the bandwidth available, and therefore the quality of the stream encoding. Although Pixel Streaming adapts the quality of the stream to match the available bandwidth, the video frames are only encoded once by the Pixel Streaming Plugin. That one encoding is used for all clients. Therefore, only one client connection can "own" the quality used for adaptive streaming. If the other clients have a much better connection to the server, they may end up seeing a lower quality stream than necessary. On the other hand, if other clients have a much worse connection to the server, they may end up with lag or jitter. By default, each time a new browser connects, it adopts the ownership of the stream. Use this checkbox from any other connected browser to retake ownership.
Show Stats	Visualizes statistics about the connection between the browser and the Unreal Engine application.

See the contents of the player.htm and app.js files under the Signalling Web Server folder to find out how these controls are implemented.

Now, find other computers and/or mobile devices in your network. Repeat the same steps, but instead of using 127.0.0.1, direct the browser to the IP address of the computer running the Unreal Engine application and the Signalling Server.

End Result

You now have one instance of the Unreal Engine running on your computer, broadcasting a media stream to multiple devices over your local network. Each connected device sees the same view of the same Level, all rendered on the same original desktop PC.

By default, all connected devices share control over the Unreal Engine application, forwarding all keyboard, mouse, and touchscreen inputs.



Desktop	iPhone	Google Pixel

4 - On Your Own

The steps above walk you through a relatively simple setup that uses a single server host and a default player page. With a little more effort, you can take the Pixel Streaming system much farther. For example:

You can completely redesign the player HTML page to meet the needs of your Project. Control who can send input to the Unreal Engine application, and even create HTML5 UI elements on the page that emit custom gameplay events to the Unreal Engine. For details, see Customizing the Player Web Page. For a working example, see the Pixel Streaming Demo available in the Learn tab of the Epic Games Launcher.
If you need to provide pixel streaming services over the open Internet, or across subnets, you will likely need to do some more advanced network configuration. Or, you may prefer to have each connecting client stream content from a separate instance of the Unreal Engine, or through a separate player page that offers different controls. For details on topics like these, see the Hosting and Networking Guide.
Each component of the Pixel Streaming system has a number of configuration properties that you can use to control encoding resolution, screen size, IP addresses and communication ports, and more. For information on all these properties and how to set them, see the Pixel Streaming Reference.